forked from Openwrt/openwrt
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
420 lines
13 KiB
Diff
420 lines
13 KiB
Diff
From 928ce2dd884412ac8afbecadc87bfd8efe511a11 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Fri, 10 Sep 2021 17:20:45 +0100
|
|
Subject: [PATCH 0518/1085] net: macb: Also set DMA coherent mask
|
|
|
|
macb: Add device tree properties that allow configuration of the AXI max pipeline register
|
|
|
|
net: macb: add support for ethtool interrupt moderation configuration
|
|
|
|
Only global throttling of rx or tx by time quanta is supported.
|
|
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
|
|
|
|
macb: add platform device shutdown function. Prevents AXI master over PCIE from hanging when the host is rebooted.
|
|
|
|
net: macb: increase polling interval for MDIO completion
|
|
|
|
MDIO is a slow bus (single-digit MHz). Polling at 1us intervals
|
|
is a bit aggressive, so increase to 100us as the transaction
|
|
usually takes 100-200us to complete.
|
|
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
|
|
|
|
net: macb: Several patches for RP1
|
|
|
|
64-bit RX fix
|
|
|
|
Also set DMA coherent mask
|
|
|
|
Add device tree properties that allow configuration of the AXI max
|
|
pipeline register
|
|
|
|
Add support for ethtool interrupt moderation configuration
|
|
|
|
Only global throttling of rx or tx by time quanta is supported.
|
|
|
|
Add platform device shutdown function. Prevents AXI master over PCIE
|
|
from hanging when the host is rebooted.
|
|
|
|
Increase polling interval for MDIO completion
|
|
|
|
MDIO is a slow bus (single-digit MHz). Polling at 1us intervals
|
|
is a bit aggressive, so increase to 100us as the transaction
|
|
usually takes 100-200us to complete.
|
|
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
|
|
|
|
net: macb: Support the phy-reset-gpios property
|
|
|
|
Allow a PHY to be reset with an optional GPIO. The reset duration can
|
|
be specified in milliseconds - the default is 10ms.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
|
|
drivers: net: macb: close device on driver shutdown
|
|
|
|
Fix some suspicious locking and instead call into macb_close, which
|
|
deregisters and frees all resources the corresponding macb_open
|
|
claimed.
|
|
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
|
|
|
|
net: macb: add hack to prevent TX stalls in a quiet system
|
|
|
|
See https://github.com/raspberrypi/linux-2712/issues/89
|
|
|
|
There is some critical window during TX where a further write to the
|
|
TSTART bit while TX is active does not cause newly queued TX descriptors
|
|
to be consumed.
|
|
|
|
For now "wait a bit, then try anyway" seems to work.
|
|
|
|
Requires further investigation, but this unsticks NFS reliably.
|
|
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
|
|
|
|
net: macb: set default interrupt moderation for GEM hardware
|
|
|
|
Defaulting to intmod = 0 is antisocial, as the MAC can generate over
|
|
130,000 interrupts per second. 50us is a sensible default.
|
|
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
|
|
---
|
|
drivers/net/ethernet/cadence/macb.h | 25 ++++
|
|
drivers/net/ethernet/cadence/macb_main.c | 152 ++++++++++++++++++++++-
|
|
2 files changed, 175 insertions(+), 2 deletions(-)
|
|
|
|
--- a/drivers/net/ethernet/cadence/macb.h
|
|
+++ b/drivers/net/ethernet/cadence/macb.h
|
|
@@ -85,6 +85,8 @@
|
|
#define GEM_PBUFRXCUT 0x0044 /* RX Partial Store and Forward */
|
|
#define GEM_JML 0x0048 /* Jumbo Max Length */
|
|
#define GEM_HS_MAC_CONFIG 0x0050 /* GEM high speed config */
|
|
+#define GEM_AMP 0x0054 /* AXI Max Pipeline */
|
|
+#define GEM_INTMOD 0x005c /* Interrupt moderation */
|
|
#define GEM_HRB 0x0080 /* Hash Bottom */
|
|
#define GEM_HRT 0x0084 /* Hash Top */
|
|
#define GEM_SA1B 0x0088 /* Specific1 Bottom */
|
|
@@ -347,6 +349,21 @@
|
|
#define GEM_ADDR64_OFFSET 30 /* Address bus width - 64b or 32b */
|
|
#define GEM_ADDR64_SIZE 1
|
|
|
|
+/* Bitfields in AMP */
|
|
+#define GEM_AR2R_MAX_PIPE_OFFSET 0 /* Maximum number of outstanding AXI read requests */
|
|
+#define GEM_AR2R_MAX_PIPE_SIZE 8
|
|
+#define GEM_AW2W_MAX_PIPE_OFFSET 8 /* Maximum number of outstanding AXI write requests */
|
|
+#define GEM_AW2W_MAX_PIPE_SIZE 8
|
|
+#define GEM_AW2B_FILL_OFFSET 16 /* Select wether the max AW2W transactions operates between: */
|
|
+#define GEM_AW2B_FILL_AW2W 0 /* 0: the AW to W AXI channel */
|
|
+#define GEM_AW2B_FILL_AW2B 1 /* 1: AW to B channel */
|
|
+#define GEM_AW2B_FILL_SIZE 1
|
|
+
|
|
+/* Bitfields in INTMOD */
|
|
+#define GEM_RX_MODERATION_OFFSET 0 /* RX interrupt moderation */
|
|
+#define GEM_RX_MODERATION_SIZE 8
|
|
+#define GEM_TX_MODERATION_OFFSET 16 /* TX interrupt moderation */
|
|
+#define GEM_TX_MODERATION_SIZE 8
|
|
|
|
/* Bitfields in PBUFRXCUT */
|
|
#define GEM_ENCUTTHRU_OFFSET 31 /* Enable RX partial store and forward */
|
|
@@ -807,6 +824,7 @@
|
|
})
|
|
|
|
#define MACB_READ_NSR(bp) macb_readl(bp, NSR)
|
|
+#define MACB_READ_TSR(bp) macb_readl(bp, TSR)
|
|
|
|
/* struct macb_dma_desc - Hardware DMA descriptor
|
|
* @addr: DMA address of data buffer
|
|
@@ -1222,6 +1240,7 @@ struct macb_queue {
|
|
dma_addr_t tx_ring_dma;
|
|
struct work_struct tx_error_task;
|
|
bool txubr_pending;
|
|
+ bool tx_pending;
|
|
struct napi_struct napi_tx;
|
|
|
|
dma_addr_t rx_ring_dma;
|
|
@@ -1285,9 +1304,15 @@ struct macb {
|
|
|
|
u32 caps;
|
|
unsigned int dma_burst_length;
|
|
+ u8 aw2w_max_pipe;
|
|
+ u8 ar2r_max_pipe;
|
|
+ bool use_aw2b_fill;
|
|
|
|
phy_interface_t phy_interface;
|
|
|
|
+ struct gpio_desc *phy_reset_gpio;
|
|
+ int phy_reset_ms;
|
|
+
|
|
/* AT91RM9200 transmit queue (1 on wire + 1 queued) */
|
|
struct macb_tx_skb rm9200_txq[2];
|
|
unsigned int max_tx_length;
|
|
--- a/drivers/net/ethernet/cadence/macb_main.c
|
|
+++ b/drivers/net/ethernet/cadence/macb_main.c
|
|
@@ -40,6 +40,9 @@
|
|
#include <linux/firmware/xlnx-zynqmp.h>
|
|
#include "macb.h"
|
|
|
|
+static unsigned int txdelay = 35;
|
|
+module_param(txdelay, uint, 0644);
|
|
+
|
|
/* This structure is only used for MACB on SiFive FU540 devices */
|
|
struct sifive_fu540_macb_mgmt {
|
|
void __iomem *reg;
|
|
@@ -334,7 +337,7 @@ static int macb_mdio_wait_for_idle(struc
|
|
u32 val;
|
|
|
|
return readx_poll_timeout(MACB_READ_NSR, bp, val, val & MACB_BIT(IDLE),
|
|
- 1, MACB_MDIO_TIMEOUT);
|
|
+ 100, MACB_MDIO_TIMEOUT);
|
|
}
|
|
|
|
static int macb_mdio_read_c22(struct mii_bus *bus, int mii_id, int regnum)
|
|
@@ -493,6 +496,19 @@ mdio_pm_exit:
|
|
return status;
|
|
}
|
|
|
|
+static int macb_mdio_reset(struct mii_bus *bus)
|
|
+{
|
|
+ struct macb *bp = bus->priv;
|
|
+
|
|
+ if (bp->phy_reset_gpio) {
|
|
+ gpiod_set_value_cansleep(bp->phy_reset_gpio, 1);
|
|
+ msleep(bp->phy_reset_ms);
|
|
+ gpiod_set_value_cansleep(bp->phy_reset_gpio, 0);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static void macb_init_buffers(struct macb *bp)
|
|
{
|
|
struct macb_queue *queue;
|
|
@@ -969,6 +985,7 @@ static int macb_mii_init(struct macb *bp
|
|
bp->mii_bus->write = &macb_mdio_write_c22;
|
|
bp->mii_bus->read_c45 = &macb_mdio_read_c45;
|
|
bp->mii_bus->write_c45 = &macb_mdio_write_c45;
|
|
+ bp->mii_bus->reset = &macb_mdio_reset;
|
|
snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
|
|
bp->pdev->name, bp->pdev->id);
|
|
bp->mii_bus->priv = bp;
|
|
@@ -1640,6 +1657,11 @@ static int macb_rx(struct macb_queue *qu
|
|
|
|
macb_init_rx_ring(queue);
|
|
queue_writel(queue, RBQP, queue->rx_ring_dma);
|
|
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
|
|
+ if (bp->hw_dma_cap & HW_DMA_CAP_64B)
|
|
+ macb_writel(bp, RBQPH,
|
|
+ upper_32_bits(queue->rx_ring_dma));
|
|
+#endif
|
|
|
|
macb_writel(bp, NCR, ctrl | MACB_BIT(RE));
|
|
|
|
@@ -1940,8 +1962,9 @@ static irqreturn_t macb_interrupt(int ir
|
|
queue_writel(queue, ISR, MACB_BIT(TCOMP) |
|
|
MACB_BIT(TXUBR));
|
|
|
|
- if (status & MACB_BIT(TXUBR)) {
|
|
+ if (status & MACB_BIT(TXUBR) || queue->tx_pending) {
|
|
queue->txubr_pending = true;
|
|
+ queue->tx_pending = 0;
|
|
wmb(); // ensure softirq can see update
|
|
}
|
|
|
|
@@ -2394,6 +2417,11 @@ static netdev_tx_t macb_start_xmit(struc
|
|
skb_tx_timestamp(skb);
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
+
|
|
+ /* TSTART write might get dropped, so make the IRQ retrigger a buffer read */
|
|
+ if (macb_readl(bp, TSR) & MACB_BIT(TGO))
|
|
+ queue->tx_pending = 1;
|
|
+
|
|
macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TSTART));
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
@@ -2768,6 +2796,37 @@ static void macb_configure_dma(struct ma
|
|
}
|
|
}
|
|
|
|
+static void gem_init_axi(struct macb *bp)
|
|
+{
|
|
+ u32 amp;
|
|
+
|
|
+ /* AXI pipeline setup - don't touch values unless specified in device
|
|
+ * tree. Some hardware could have reset values > 1.
|
|
+ */
|
|
+ amp = gem_readl(bp, AMP);
|
|
+
|
|
+ if (bp->use_aw2b_fill)
|
|
+ amp = GEM_BFINS(AW2B_FILL, bp->use_aw2b_fill, amp);
|
|
+ if (bp->aw2w_max_pipe)
|
|
+ amp = GEM_BFINS(AW2W_MAX_PIPE, bp->aw2w_max_pipe, amp);
|
|
+ if (bp->ar2r_max_pipe)
|
|
+ amp = GEM_BFINS(AR2R_MAX_PIPE, bp->ar2r_max_pipe, amp);
|
|
+
|
|
+ gem_writel(bp, AMP, amp);
|
|
+}
|
|
+
|
|
+static void gem_init_intmod(struct macb *bp)
|
|
+{
|
|
+ unsigned int throttle;
|
|
+ u32 intmod = 0;
|
|
+
|
|
+ /* Use sensible interrupt moderation thresholds (50us rx and tx) */
|
|
+ throttle = (1000 * 50) / 800;
|
|
+ intmod = GEM_BFINS(TX_MODERATION, throttle, intmod);
|
|
+ intmod = GEM_BFINS(RX_MODERATION, throttle, intmod);
|
|
+ gem_writel(bp, INTMOD, intmod);
|
|
+}
|
|
+
|
|
static void macb_init_hw(struct macb *bp)
|
|
{
|
|
u32 config;
|
|
@@ -2796,6 +2855,11 @@ static void macb_init_hw(struct macb *bp
|
|
if (bp->caps & MACB_CAPS_JUMBO)
|
|
bp->rx_frm_len_mask = MACB_RX_JFRMLEN_MASK;
|
|
|
|
+ if (macb_is_gem(bp)) {
|
|
+ gem_init_axi(bp);
|
|
+ gem_init_intmod(bp);
|
|
+ }
|
|
+
|
|
macb_configure_dma(bp);
|
|
|
|
/* Enable RX partial store and forward and set watermark */
|
|
@@ -3157,6 +3221,52 @@ static void gem_get_ethtool_strings(stru
|
|
}
|
|
}
|
|
|
|
+static int gem_set_coalesce(struct net_device *dev,
|
|
+ struct ethtool_coalesce *ec,
|
|
+ struct kernel_ethtool_coalesce *kernel_coal,
|
|
+ struct netlink_ext_ack *extack)
|
|
+{
|
|
+ struct macb *bp = netdev_priv(dev);
|
|
+ unsigned int tx_throttle;
|
|
+ unsigned int rx_throttle;
|
|
+ u32 intmod = 0;
|
|
+
|
|
+ /* GEM has simple IRQ throttling support. RX and TX interrupts
|
|
+ * are separately moderated on 800ns quantums, with no support
|
|
+ * for frame coalescing.
|
|
+ */
|
|
+
|
|
+ /* Max is 255 * 0.8us = 204us. Zero implies no moderation. */
|
|
+ if (ec->rx_coalesce_usecs > 204 || ec->tx_coalesce_usecs > 204)
|
|
+ return -EINVAL;
|
|
+
|
|
+ tx_throttle = (1000 * ec->tx_coalesce_usecs) / 800;
|
|
+ rx_throttle = (1000 * ec->rx_coalesce_usecs) / 800;
|
|
+
|
|
+ intmod = GEM_BFINS(TX_MODERATION, tx_throttle, intmod);
|
|
+ intmod = GEM_BFINS(RX_MODERATION, rx_throttle, intmod);
|
|
+
|
|
+ gem_writel(bp, INTMOD, intmod);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int gem_get_coalesce(struct net_device *dev,
|
|
+ struct ethtool_coalesce *ec,
|
|
+ struct kernel_ethtool_coalesce *kernel_coal,
|
|
+ struct netlink_ext_ack *extack)
|
|
+{
|
|
+ struct macb *bp = netdev_priv(dev);
|
|
+ u32 intmod;
|
|
+
|
|
+ intmod = gem_readl(bp, INTMOD);
|
|
+
|
|
+ ec->tx_coalesce_usecs = (GEM_BFEXT(TX_MODERATION, intmod) * 800) / 1000;
|
|
+ ec->rx_coalesce_usecs = (GEM_BFEXT(RX_MODERATION, intmod) * 800) / 1000;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static struct net_device_stats *macb_get_stats(struct net_device *dev)
|
|
{
|
|
struct macb *bp = netdev_priv(dev);
|
|
@@ -3749,6 +3859,8 @@ static const struct ethtool_ops macb_eth
|
|
};
|
|
|
|
static const struct ethtool_ops gem_ethtool_ops = {
|
|
+ .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS |
|
|
+ ETHTOOL_COALESCE_TX_USECS,
|
|
.get_regs_len = macb_get_regs_len,
|
|
.get_regs = macb_get_regs,
|
|
.get_wol = macb_get_wol,
|
|
@@ -3758,6 +3870,8 @@ static const struct ethtool_ops gem_etht
|
|
.get_ethtool_stats = gem_get_ethtool_stats,
|
|
.get_strings = gem_get_ethtool_strings,
|
|
.get_sset_count = gem_get_sset_count,
|
|
+ .get_coalesce = gem_get_coalesce,
|
|
+ .set_coalesce = gem_set_coalesce,
|
|
.get_link_ksettings = macb_get_link_ksettings,
|
|
.set_link_ksettings = macb_set_link_ksettings,
|
|
.get_ringparam = macb_get_ringparam,
|
|
@@ -5054,6 +5168,11 @@ static int macb_probe(struct platform_de
|
|
}
|
|
}
|
|
}
|
|
+
|
|
+ device_property_read_u8(&pdev->dev, "cdns,aw2w-max-pipe", &bp->aw2w_max_pipe);
|
|
+ device_property_read_u8(&pdev->dev, "cdns,ar2r-max-pipe", &bp->ar2r_max_pipe);
|
|
+ bp->use_aw2b_fill = device_property_read_bool(&pdev->dev, "cdns,use-aw2b-fill");
|
|
+
|
|
spin_lock_init(&bp->lock);
|
|
|
|
/* setup capabilities */
|
|
@@ -5109,6 +5228,21 @@ static int macb_probe(struct platform_de
|
|
else
|
|
bp->phy_interface = interface;
|
|
|
|
+ /* optional PHY reset-related properties */
|
|
+ bp->phy_reset_gpio = devm_gpiod_get_optional(&pdev->dev, "phy-reset",
|
|
+ GPIOD_OUT_LOW);
|
|
+ if (IS_ERR(bp->phy_reset_gpio)) {
|
|
+ dev_err(&pdev->dev, "Failed to obtain phy-reset gpio\n");
|
|
+ err = PTR_ERR(bp->phy_reset_gpio);
|
|
+ goto err_out_free_netdev;
|
|
+ }
|
|
+
|
|
+ bp->phy_reset_ms = 10;
|
|
+ of_property_read_u32(np, "phy-reset-duration", &bp->phy_reset_ms);
|
|
+ /* A sane reset duration should not be longer than 1s */
|
|
+ if (bp->phy_reset_ms > 1000)
|
|
+ bp->phy_reset_ms = 1000;
|
|
+
|
|
/* IP specific init */
|
|
err = init(pdev);
|
|
if (err)
|
|
@@ -5185,6 +5319,19 @@ static int macb_remove(struct platform_d
|
|
return 0;
|
|
}
|
|
|
|
+static void macb_shutdown(struct platform_device *pdev)
|
|
+{
|
|
+ struct net_device *dev;
|
|
+
|
|
+ dev = platform_get_drvdata(pdev);
|
|
+
|
|
+ rtnl_lock();
|
|
+ netif_device_detach(dev);
|
|
+ if (netif_running(dev))
|
|
+ dev_close(dev);
|
|
+ rtnl_unlock();
|
|
+}
|
|
+
|
|
static int __maybe_unused macb_suspend(struct device *dev)
|
|
{
|
|
struct net_device *netdev = dev_get_drvdata(dev);
|
|
@@ -5399,6 +5546,7 @@ static const struct dev_pm_ops macb_pm_o
|
|
static struct platform_driver macb_driver = {
|
|
.probe = macb_probe,
|
|
.remove = macb_remove,
|
|
+ .shutdown = macb_shutdown,
|
|
.driver = {
|
|
.name = "macb",
|
|
.of_match_table = of_match_ptr(macb_dt_ids),
|