forked from Openwrt/openwrt
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
95 lines
3.1 KiB
Diff
95 lines
3.1 KiB
Diff
From f32d3672fe2349b0ed3f2989dc64ac44f78339cb Mon Sep 17 00:00:00 2001
|
|
From: David Plowman <david.plowman@raspberrypi.com>
|
|
Date: Wed, 22 Mar 2023 12:01:57 +0000
|
|
Subject: [PATCH 0427/1085] drivers: media: i2c: imx708: Fix WIDE_DYNAMIC_RANGE
|
|
control with long exposure
|
|
|
|
Setting V4L2_CID_WIDE_DYNAMIC_RANGE was causing the long exposure
|
|
shift count to be reset, which is incorrect if the user has already
|
|
changed the frame length to cause it to have a non-zero value.
|
|
|
|
Because it only updates control ranges and doesn't set any registers,
|
|
the control can also be applied when the sensor is not powered on.
|
|
|
|
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
|
|
---
|
|
drivers/media/i2c/imx708.c | 45 ++++++++++++++++++++++++--------------
|
|
1 file changed, 28 insertions(+), 17 deletions(-)
|
|
|
|
--- a/drivers/media/i2c/imx708.c
|
|
+++ b/drivers/media/i2c/imx708.c
|
|
@@ -171,7 +171,7 @@ struct imx708_mode {
|
|
/* Not all modes have the same exposure lines step. */
|
|
u32 exposure_lines_step;
|
|
|
|
- /* HDR flag, currently not used at runtime */
|
|
+ /* HDR flag, used for checking if the current mode is HDR */
|
|
bool hdr;
|
|
};
|
|
|
|
@@ -1060,9 +1060,6 @@ static void imx708_set_framing_limits(st
|
|
unsigned int hblank;
|
|
const struct imx708_mode *mode = imx708->mode;
|
|
|
|
- /* Default to no long exposure multiplier */
|
|
- imx708->long_exp_shift = 0;
|
|
-
|
|
__v4l2_ctrl_modify_range(imx708->pixel_rate,
|
|
mode->pixel_rate, mode->pixel_rate,
|
|
1, mode->pixel_rate);
|
|
@@ -1091,12 +1088,33 @@ static int imx708_set_ctrl(struct v4l2_c
|
|
unsigned int code, num_modes;
|
|
int ret = 0;
|
|
|
|
- /*
|
|
- * The VBLANK control may change the limits of usable exposure, so check
|
|
- * and adjust if necessary.
|
|
- */
|
|
- if (ctrl->id == V4L2_CID_VBLANK)
|
|
+ switch (ctrl->id) {
|
|
+ case V4L2_CID_VBLANK:
|
|
+ /*
|
|
+ * The VBLANK control may change the limits of usable exposure,
|
|
+ * so check and adjust if necessary.
|
|
+ */
|
|
imx708_adjust_exposure_range(imx708, ctrl);
|
|
+ break;
|
|
+
|
|
+ case V4L2_CID_WIDE_DYNAMIC_RANGE:
|
|
+ /*
|
|
+ * The WIDE_DYNAMIC_RANGE control can also be applied immediately
|
|
+ * as it doesn't set any registers. Don't do anything if the mode
|
|
+ * already matches.
|
|
+ */
|
|
+ if (imx708->mode && imx708->mode->hdr != ctrl->val) {
|
|
+ code = imx708_get_format_code(imx708);
|
|
+ get_mode_table(code, &mode_list, &num_modes, ctrl->val);
|
|
+ imx708->mode = v4l2_find_nearest_size(mode_list,
|
|
+ num_modes,
|
|
+ width, height,
|
|
+ imx708->mode->width,
|
|
+ imx708->mode->height);
|
|
+ imx708_set_framing_limits(imx708);
|
|
+ }
|
|
+ break;
|
|
+ }
|
|
|
|
/*
|
|
* Applying V4L2 control value only happens
|
|
@@ -1158,14 +1176,7 @@ static int imx708_set_ctrl(struct v4l2_c
|
|
imx708->notify_gains->p_new.p_u32[3]);
|
|
break;
|
|
case V4L2_CID_WIDE_DYNAMIC_RANGE:
|
|
- code = imx708_get_format_code(imx708);
|
|
- get_mode_table(code, &mode_list, &num_modes, ctrl->val);
|
|
- imx708->mode = v4l2_find_nearest_size(mode_list,
|
|
- num_modes,
|
|
- width, height,
|
|
- imx708->mode->width,
|
|
- imx708->mode->height);
|
|
- imx708_set_framing_limits(imx708);
|
|
+ /* Already handled above. */
|
|
break;
|
|
default:
|
|
dev_info(&client->dev,
|