forked from Openwrt/openwrt
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
388 lines
9.9 KiB
Diff
388 lines
9.9 KiB
Diff
From 530b24129f53b70c609b8cc72173f850708c2856 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Wed, 29 Sep 2021 14:04:28 +0100
|
|
Subject: [PATCH 0355/1085] media: i2c: Add driver for AD5398 VCM lens driver
|
|
|
|
Adds a driver for the Analog Devices AD5398 10 bit
|
|
I2C DAC which is commonly used for driving VCM lens
|
|
mechanisms.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
drivers/media/i2c/Kconfig | 7 +
|
|
drivers/media/i2c/Makefile | 1 +
|
|
drivers/media/i2c/ad5398.c | 341 +++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 349 insertions(+)
|
|
create mode 100644 drivers/media/i2c/ad5398.c
|
|
|
|
--- a/drivers/media/i2c/Kconfig
|
|
+++ b/drivers/media/i2c/Kconfig
|
|
@@ -642,6 +642,13 @@ endif
|
|
menu "Lens drivers"
|
|
visible if MEDIA_CAMERA_SUPPORT
|
|
|
|
+config VIDEO_AD5398
|
|
+ tristate "AD5398 lens voice coil support"
|
|
+ depends on GPIOLIB && I2C && VIDEO_DEV
|
|
+ select MEDIA_CONTROLLER
|
|
+ help
|
|
+ This is a driver for the AD5398 camera lens voice coil.
|
|
+
|
|
config VIDEO_AD5820
|
|
tristate "AD5820 lens voice coil support"
|
|
depends on GPIOLIB && I2C && VIDEO_DEV
|
|
--- a/drivers/media/i2c/Makefile
|
|
+++ b/drivers/media/i2c/Makefile
|
|
@@ -3,6 +3,7 @@
|
|
msp3400-objs := msp3400-driver.o msp3400-kthreads.o
|
|
|
|
obj-$(CONFIG_SDR_MAX2175) += max2175.o
|
|
+obj-$(CONFIG_VIDEO_AD5398) += ad5398.o
|
|
obj-$(CONFIG_VIDEO_AD5820) += ad5820.o
|
|
obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
|
|
obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
|
|
--- /dev/null
|
|
+++ b/drivers/media/i2c/ad5398.c
|
|
@@ -0,0 +1,341 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+/*
|
|
+ * AD5398 DAC driver for camera voice coil focus.
|
|
+ * Copyright (C) 2021 Raspberry Pi (Trading) Ltd.
|
|
+ *
|
|
+ * Based on AD5820 DAC driver by Nokia and TI.
|
|
+ *
|
|
+ * This driver uses the regulator framework notification hooks on the
|
|
+ * assumption that the VCM and sensor share a regulator. This means the VCM
|
|
+ * position will be restored when either the sensor or VCM subdevices are opened
|
|
+ * or powered up. The client can therefore choose to ignore the VCM subdevice,
|
|
+ * and the lens position will be as previously requested. Without that, there
|
|
+ * is a hard requirement to have the VCM subdevice open in order for the VCM
|
|
+ * to be powered and at the requested position.
|
|
+ */
|
|
+
|
|
+#include <linux/errno.h>
|
|
+#include <linux/i2c.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/regulator/consumer.h>
|
|
+#include <linux/gpio/consumer.h>
|
|
+
|
|
+#include <media/v4l2-ctrls.h>
|
|
+#include <media/v4l2-device.h>
|
|
+#include <media/v4l2-subdev.h>
|
|
+
|
|
+/* Register definitions */
|
|
+#define AD5398_POWER_DOWN BIT(15)
|
|
+#define AD5398_DAC_SHIFT 4
|
|
+
|
|
+#define to_ad5398_device(sd) container_of(sd, struct ad5398_device, subdev)
|
|
+
|
|
+struct ad5398_device {
|
|
+ struct v4l2_subdev subdev;
|
|
+ struct ad5398_platform_data *platform_data;
|
|
+ struct regulator *vana;
|
|
+ struct notifier_block nb;
|
|
+
|
|
+ struct v4l2_ctrl_handler ctrls;
|
|
+ u32 focus_absolute;
|
|
+
|
|
+ bool standby;
|
|
+};
|
|
+
|
|
+static int ad5398_write(struct ad5398_device *coil, u16 data)
|
|
+{
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(&coil->subdev);
|
|
+ struct i2c_msg msg;
|
|
+ __be16 be_data;
|
|
+ int r;
|
|
+
|
|
+ if (!client->adapter)
|
|
+ return -ENODEV;
|
|
+
|
|
+ be_data = cpu_to_be16(data);
|
|
+ msg.addr = client->addr;
|
|
+ msg.flags = 0;
|
|
+ msg.len = 2;
|
|
+ msg.buf = (u8 *)&be_data;
|
|
+
|
|
+ r = i2c_transfer(client->adapter, &msg, 1);
|
|
+ if (r < 0) {
|
|
+ dev_err(&client->dev, "write failed, error %d\n", r);
|
|
+ return r;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Calculate status word and write it to the device based on current
|
|
+ * values of V4L2 controls. It is assumed that the stored V4L2 control
|
|
+ * values are properly limited and rounded.
|
|
+ */
|
|
+static int ad5398_update_hw(struct ad5398_device *coil)
|
|
+{
|
|
+ u16 status;
|
|
+
|
|
+ status = coil->focus_absolute << AD5398_DAC_SHIFT;
|
|
+
|
|
+ if (coil->standby)
|
|
+ status |= AD5398_POWER_DOWN;
|
|
+
|
|
+ return ad5398_write(coil, status);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Power handling
|
|
+ */
|
|
+static int ad5398_power_off(struct ad5398_device *coil)
|
|
+{
|
|
+ int ret = 0;
|
|
+
|
|
+ coil->standby = true;
|
|
+ ret = ad5398_update_hw(coil);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int ad5398_power_on(struct ad5398_device *coil)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ /* Restore the hardware settings. */
|
|
+ coil->standby = false;
|
|
+ ret = ad5398_update_hw(coil);
|
|
+ if (ret)
|
|
+ goto fail;
|
|
+
|
|
+ return 0;
|
|
+
|
|
+fail:
|
|
+ coil->standby = true;
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * V4L2 controls
|
|
+ */
|
|
+static int ad5398_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
+{
|
|
+ struct ad5398_device *coil =
|
|
+ container_of(ctrl->handler, struct ad5398_device, ctrls);
|
|
+
|
|
+ switch (ctrl->id) {
|
|
+ case V4L2_CID_FOCUS_ABSOLUTE:
|
|
+ coil->focus_absolute = ctrl->val;
|
|
+ return ad5398_update_hw(coil);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct v4l2_ctrl_ops ad5398_ctrl_ops = {
|
|
+ .s_ctrl = ad5398_set_ctrl,
|
|
+};
|
|
+
|
|
+static int ad5398_init_controls(struct ad5398_device *coil)
|
|
+{
|
|
+ v4l2_ctrl_handler_init(&coil->ctrls, 1);
|
|
+
|
|
+ /*
|
|
+ * V4L2_CID_FOCUS_ABSOLUTE
|
|
+ *
|
|
+ * Minimum current is 0 mA, maximum is 120 mA. Thus, 1 code is
|
|
+ * equivalent to 120/1023 = 0.1173 mA. Nevertheless, we do not use [mA]
|
|
+ * for focus position, because it is meaningless for user. Meaningful
|
|
+ * would be to use focus distance or even its inverse, but since the
|
|
+ * driver doesn't have sufficient knowledge to do the conversion, we
|
|
+ * will just use abstract codes here. In any case, smaller value = focus
|
|
+ * position farther from camera. The default zero value means focus at
|
|
+ * infinity, and also least current consumption.
|
|
+ */
|
|
+ v4l2_ctrl_new_std(&coil->ctrls, &ad5398_ctrl_ops,
|
|
+ V4L2_CID_FOCUS_ABSOLUTE, 0, 1023, 1, 0);
|
|
+
|
|
+ if (coil->ctrls.error)
|
|
+ return coil->ctrls.error;
|
|
+
|
|
+ coil->focus_absolute = 0;
|
|
+
|
|
+ coil->subdev.ctrl_handler = &coil->ctrls;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * V4L2 subdev operations
|
|
+ */
|
|
+static int ad5398_registered(struct v4l2_subdev *subdev)
|
|
+{
|
|
+ struct ad5398_device *coil = to_ad5398_device(subdev);
|
|
+
|
|
+ return ad5398_init_controls(coil);
|
|
+}
|
|
+
|
|
+static int
|
|
+ad5398_set_power(struct v4l2_subdev *subdev, int on)
|
|
+{
|
|
+ struct ad5398_device *coil = to_ad5398_device(subdev);
|
|
+ int ret;
|
|
+
|
|
+ if (on)
|
|
+ ret = regulator_enable(coil->vana);
|
|
+ else
|
|
+ ret = regulator_disable(coil->vana);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int ad5398_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
+{
|
|
+ struct ad5398_device *coil = to_ad5398_device(sd);
|
|
+
|
|
+ return regulator_enable(coil->vana);
|
|
+}
|
|
+
|
|
+static int ad5398_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
+{
|
|
+ struct ad5398_device *coil = to_ad5398_device(sd);
|
|
+
|
|
+ return regulator_disable(coil->vana);
|
|
+}
|
|
+
|
|
+static const struct v4l2_subdev_core_ops ad5398_core_ops = {
|
|
+ .s_power = ad5398_set_power,
|
|
+};
|
|
+
|
|
+static const struct v4l2_subdev_ops ad5398_ops = {
|
|
+ .core = &ad5398_core_ops,
|
|
+};
|
|
+
|
|
+static const struct v4l2_subdev_internal_ops ad5398_internal_ops = {
|
|
+ .registered = ad5398_registered,
|
|
+ .open = ad5398_open,
|
|
+ .close = ad5398_close,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * I2C driver
|
|
+ */
|
|
+static int __maybe_unused ad5398_suspend(struct device *dev)
|
|
+{
|
|
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
|
|
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
|
|
+ struct ad5398_device *coil = to_ad5398_device(subdev);
|
|
+
|
|
+ return regulator_enable(coil->vana);
|
|
+}
|
|
+
|
|
+static int __maybe_unused ad5398_resume(struct device *dev)
|
|
+{
|
|
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
|
|
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
|
|
+ struct ad5398_device *coil = to_ad5398_device(subdev);
|
|
+
|
|
+ return regulator_disable(coil->vana);
|
|
+}
|
|
+
|
|
+static int ad5398_regulator_notifier(struct notifier_block *nb,
|
|
+ unsigned long event,
|
|
+ void *ignored)
|
|
+{
|
|
+ struct ad5398_device *coil = container_of(nb, struct ad5398_device, nb);
|
|
+
|
|
+ if (event == REGULATOR_EVENT_ENABLE)
|
|
+ ad5398_power_on(coil);
|
|
+ else if (event == REGULATOR_EVENT_PRE_DISABLE)
|
|
+ ad5398_power_off(coil);
|
|
+
|
|
+ return NOTIFY_OK;
|
|
+}
|
|
+
|
|
+static int ad5398_probe(struct i2c_client *client,
|
|
+ const struct i2c_device_id *devid)
|
|
+{
|
|
+ struct ad5398_device *coil;
|
|
+ int ret;
|
|
+
|
|
+ coil = devm_kzalloc(&client->dev, sizeof(*coil), GFP_KERNEL);
|
|
+ if (!coil)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ coil->vana = devm_regulator_get(&client->dev, "VANA");
|
|
+ if (IS_ERR(coil->vana)) {
|
|
+ ret = PTR_ERR(coil->vana);
|
|
+ if (ret != -EPROBE_DEFER)
|
|
+ dev_err(&client->dev, "could not get regulator for vana\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ v4l2_i2c_subdev_init(&coil->subdev, client, &ad5398_ops);
|
|
+ coil->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
+ coil->subdev.internal_ops = &ad5398_internal_ops;
|
|
+ coil->subdev.entity.function = MEDIA_ENT_F_LENS;
|
|
+ strscpy(coil->subdev.name, "ad5398 focus", sizeof(coil->subdev.name));
|
|
+
|
|
+ coil->nb.notifier_call = &ad5398_regulator_notifier;
|
|
+ ret = regulator_register_notifier(coil->vana, &coil->nb);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ ret = media_entity_pads_init(&coil->subdev.entity, 0, NULL);
|
|
+ if (ret < 0)
|
|
+ goto cleanup2;
|
|
+
|
|
+ ret = v4l2_async_register_subdev(&coil->subdev);
|
|
+ if (ret < 0)
|
|
+ goto cleanup;
|
|
+
|
|
+ return ret;
|
|
+
|
|
+cleanup:
|
|
+ media_entity_cleanup(&coil->subdev.entity);
|
|
+cleanup2:
|
|
+ regulator_unregister_notifier(coil->vana, &coil->nb);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void ad5398_remove(struct i2c_client *client)
|
|
+{
|
|
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
|
|
+ struct ad5398_device *coil = to_ad5398_device(subdev);
|
|
+
|
|
+ v4l2_async_unregister_subdev(&coil->subdev);
|
|
+ v4l2_ctrl_handler_free(&coil->ctrls);
|
|
+ media_entity_cleanup(&coil->subdev.entity);
|
|
+}
|
|
+
|
|
+static const struct i2c_device_id ad5398_id_table[] = {
|
|
+ { "ad5398", 0 },
|
|
+ { }
|
|
+};
|
|
+MODULE_DEVICE_TABLE(i2c, ad5398_id_table);
|
|
+
|
|
+static const struct of_device_id ad5398_of_table[] = {
|
|
+ { .compatible = "adi,ad5398" },
|
|
+ { }
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, ad5398_of_table);
|
|
+
|
|
+static SIMPLE_DEV_PM_OPS(ad5398_pm, ad5398_suspend, ad5398_resume);
|
|
+
|
|
+static struct i2c_driver ad5398_i2c_driver = {
|
|
+ .driver = {
|
|
+ .name = "ad5398",
|
|
+ .pm = &ad5398_pm,
|
|
+ .of_match_table = ad5398_of_table,
|
|
+ },
|
|
+ .probe = ad5398_probe,
|
|
+ .remove = ad5398_remove,
|
|
+ .id_table = ad5398_id_table,
|
|
+};
|
|
+
|
|
+module_i2c_driver(ad5398_i2c_driver);
|
|
+
|
|
+MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.com>");
|
|
+MODULE_DESCRIPTION("AD5398 camera lens driver");
|
|
+MODULE_LICENSE("GPL");
|