Openwrt/msm8916-openwrt
1
0
Fork 0
forked from Openwrt/openwrt
Code Issues 1 Pull Requests Actions Activity
msm8916
msm8916-openwrt/target/linux/bcm27xx/patches-6.6/950-0317-media-i2c-ov5647-Support-HFLIP-and-VFLIP.patch
Álvaro Fernández Rojas 8c405cdccc bcm27xx: add 6.6 kernel patches 
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.34..rpi-6.1.y

Some patches needed rebasing and, as usual, the applied and reverted, wireless
drivers, Github workflows, READMEs and defconfigs patches were removed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-06-18 18:52:49 +02:00

190 lines
5.3 KiB
Diff
Raw Permalink Blame History

From c05fbbc4a530ebf11ed647a94d97352bed910dae Mon Sep 17 00:00:00 2001
From: David Plowman <david.plowman@raspberrypi.com>
Date: Mon, 22 Nov 2021 13:10:39 +0000
Subject: [PATCH 0317/1085] media: i2c: ov5647: Support HFLIP and VFLIP
Add these missing V4L2 controls. Tested binned and full resolution
modes in all four orientations using Raspberry Pi running libcamera.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
---
drivers/media/i2c/ov5647.c | 76 +++++++++++++++++++++++++++++++++++---
1 file changed, 70 insertions(+), 6 deletions(-)
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -54,6 +54,8 @@
#define OV5647_REG_GAIN_LO 0x350b
#define OV5647_REG_VTS_HI 0x380e
#define OV5647_REG_VTS_LO 0x380f
+#define OV5647_REG_VFLIP 0x3820
+#define OV5647_REG_HFLIP 0x3821
#define OV5647_REG_FRAME_OFF_NUMBER 0x4202
#define OV5647_REG_MIPI_CTRL00 0x4800
#define OV5647_REG_MIPI_CTRL14 0x4814
@@ -109,6 +111,8 @@ struct ov5647 {
struct v4l2_ctrl *hblank;
struct v4l2_ctrl *vblank;
struct v4l2_ctrl *exposure;
+ struct v4l2_ctrl *hflip;
+ struct v4l2_ctrl *vflip;
bool streaming;
};
@@ -151,7 +155,7 @@ static struct regval_list ov5647_2592x19
{0x3036, 0x69},
{0x303c, 0x11},
{0x3106, 0xf5},
- {0x3821, 0x06},
+ {0x3821, 0x00},
{0x3820, 0x00},
{0x3827, 0xec},
{0x370c, 0x03},
@@ -240,7 +244,7 @@ static struct regval_list ov5647_1080p30
{0x3036, 0x62},
{0x303c, 0x11},
{0x3106, 0xf5},
- {0x3821, 0x06},
+ {0x3821, 0x00},
{0x3820, 0x00},
{0x3827, 0xec},
{0x370c, 0x03},
@@ -404,7 +408,7 @@ static struct regval_list ov5647_2x2binn
{0x4800, 0x24},
{0x3503, 0x03},
{0x3820, 0x41},
- {0x3821, 0x07},
+ {0x3821, 0x01},
{0x350a, 0x00},
{0x350b, 0x10},
{0x3500, 0x00},
@@ -420,7 +424,7 @@ static struct regval_list ov5647_640x480
{0x3035, 0x11},
{0x3036, 0x46},
{0x303c, 0x11},
- {0x3821, 0x07},
+ {0x3821, 0x01},
{0x3820, 0x41},
{0x370c, 0x03},
{0x3612, 0x59},
@@ -954,6 +958,25 @@ static const struct v4l2_subdev_video_op
.s_stream = ov5647_s_stream,
};
+/* This function returns the mbus code for the current settings of the
+ HFLIP and VFLIP controls. */
+
+static u32 ov5647_get_mbus_code(struct v4l2_subdev *sd)
+{
+ struct ov5647 *sensor = to_sensor(sd);
+ /* The control values are only 0 or 1. */
+ int index = sensor->hflip->val | (sensor->vflip->val << 1);
+
+ static const u32 codes[4] = {
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ MEDIA_BUS_FMT_SGRBG10_1X10
+ };
+
+ return codes[index];
+}
+
static int ov5647_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
@@ -961,7 +984,7 @@ static int ov5647_enum_mbus_code(struct
if (code->index > 0)
return -EINVAL;
- code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
+ code->code = ov5647_get_mbus_code(sd);
return 0;
}
@@ -972,7 +995,7 @@ static int ov5647_enum_frame_size(struct
{
const struct v4l2_mbus_framefmt *fmt;
- if (fse->code != MEDIA_BUS_FMT_SBGGR10_1X10 ||
+ if (fse->code != ov5647_get_mbus_code(sd) ||
fse->index >= ARRAY_SIZE(ov5647_modes))
return -EINVAL;
@@ -1005,6 +1028,8 @@ static int ov5647_get_pad_fmt(struct v4l
}
*fmt = *sensor_format;
+ /* The code we pass back must reflect the current h/vflips. */
+ fmt->code = ov5647_get_mbus_code(sd);
mutex_unlock(&sensor->lock);
return 0;
@@ -1052,6 +1077,8 @@ static int ov5647_set_pad_fmt(struct v4l
exposure_def);
}
*fmt = mode->format;
+ /* The code we pass back must reflect the current h/vflips. */
+ fmt->code = ov5647_get_mbus_code(sd);
mutex_unlock(&sensor->lock);
return 0;
@@ -1227,6 +1254,25 @@ static int ov5647_s_exposure(struct v4l2
return ov5647_write(sd, OV5647_REG_EXP_LO, (val & 0xf) << 4);
}
+static int ov5647_s_flip( struct v4l2_subdev *sd, u16 reg, u32 ctrl_val)
+{
+ int ret;
+ u8 reg_val;
+
+ /* Set or clear bit 1 and leave everything else alone. */
+ ret = ov5647_read(sd, reg, &reg_val);
+ if (ret == 0) {
+ if (ctrl_val)
+ reg_val |= 2;
+ else
+ reg_val &= ~2;
+
+ ret = ov5647_write(sd, reg, reg_val);
+ }
+
+ return ret;
+}
+
static int ov5647_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct ov5647 *sensor = container_of(ctrl->handler,
@@ -1289,6 +1335,14 @@ static int ov5647_s_ctrl(struct v4l2_ctr
/* Read-only, but we adjust it based on mode. */
break;
+ case V4L2_CID_HFLIP:
+ /* There's an in-built hflip in the sensor, so account for that here. */
+ ov5647_s_flip(sd, OV5647_REG_HFLIP, !ctrl->val);
+ break;
+ case V4L2_CID_VFLIP:
+ ov5647_s_flip(sd, OV5647_REG_VFLIP, ctrl->val);
+ break;
+
default:
dev_info(&client->dev,
"Control (id:0x%x, val:0x%x) not supported\n",
@@ -1360,6 +1414,16 @@ static int ov5647_init_controls(struct o
ARRAY_SIZE(ov5647_test_pattern_menu) - 1,
0, 0, ov5647_test_pattern_menu);
+ sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ if (sensor->hflip)
+ sensor->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
+
+ sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ if (sensor->vflip)
+ sensor->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
+
v4l2_fwnode_device_parse(dev, &props);
v4l2_ctrl_new_fwnode_properties(&sensor->ctrls, &ov5647_ctrl_ops,
Reference in New Issue View Git Blame Copy Permalink