forked from Openwrt/openwrt
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
94 lines
3.5 KiB
Diff
94 lines
3.5 KiB
Diff
From c13337b84f2dfaf5fb987b3db59c5545c55a0628 Mon Sep 17 00:00:00 2001
|
|
From: Nick Bulleid <nedbulleid@fastmail.com>
|
|
Date: Thu, 10 May 2018 21:57:02 +0100
|
|
Subject: [PATCH 0122/1085] Add ability to export gpio used by gpio-poweroff
|
|
|
|
Signed-off-by: Nick Bulleid <nedbulleid@fastmail.com>
|
|
|
|
Added export feature to gpio-poweroff documentation
|
|
|
|
Signed-off-by: Nick Bulleid <nedbulleid@fastmail.com>
|
|
---
|
|
.../bindings/power/reset/gpio-poweroff.txt | 42 +++++++++++++++++++
|
|
drivers/power/reset/gpio-poweroff.c | 9 ++++
|
|
2 files changed, 51 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt
|
|
@@ -0,0 +1,42 @@
|
|
+Driver a GPIO line that can be used to turn the power off.
|
|
+
|
|
+The driver supports both level triggered and edge triggered power off.
|
|
+At driver load time, the driver will request the given gpio line and
|
|
+install a handler to power off the system. If the optional properties
|
|
+'input' is not found, the GPIO line will be driven in the inactive
|
|
+state. Otherwise its configured as an input.
|
|
+
|
|
+When the power-off handler is called, the gpio is configured as an
|
|
+output, and drive active, so triggering a level triggered power off
|
|
+condition. This will also cause an inactive->active edge condition, so
|
|
+triggering positive edge triggered power off. After a delay of 100ms,
|
|
+the GPIO is set to inactive, thus causing an active->inactive edge,
|
|
+triggering negative edge triggered power off. After another 100ms
|
|
+delay the GPIO is driver active again. If the power is still on and
|
|
+the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
|
|
+
|
|
+Required properties:
|
|
+- compatible : should be "gpio-poweroff".
|
|
+- gpios : The GPIO to set high/low, see "gpios property" in
|
|
+ Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
|
|
+ low to power down the board set it to "Active Low", otherwise set
|
|
+ gpio to "Active High".
|
|
+
|
|
+Optional properties:
|
|
+- input : Initially configure the GPIO line as an input. Only reconfigure
|
|
+ it to an output when the power-off handler is called. If this optional
|
|
+ property is not specified, the GPIO is initialized as an output in its
|
|
+ inactive state.
|
|
+- active-delay-ms: Delay (default 100) to wait after driving gpio active
|
|
+- inactive-delay-ms: Delay (default 100) to wait after driving gpio inactive
|
|
+- timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is
|
|
+ specified, 3000 ms is used.
|
|
+- export : Export the GPIO line to the sysfs system
|
|
+
|
|
+Examples:
|
|
+
|
|
+gpio-poweroff {
|
|
+ compatible = "gpio-poweroff";
|
|
+ gpios = <&gpio 4 0>;
|
|
+ timeout-ms = <3000>;
|
|
+};
|
|
--- a/drivers/power/reset/gpio-poweroff.c
|
|
+++ b/drivers/power/reset/gpio-poweroff.c
|
|
@@ -53,6 +53,7 @@ static int gpio_poweroff_probe(struct pl
|
|
bool input = false;
|
|
enum gpiod_flags flags;
|
|
bool force = false;
|
|
+ bool export = false;
|
|
|
|
/* If a pm_power_off function has already been added, leave it alone */
|
|
force = of_property_read_bool(pdev->dev.of_node, "force");
|
|
@@ -78,6 +79,12 @@ static int gpio_poweroff_probe(struct pl
|
|
if (IS_ERR(reset_gpio))
|
|
return PTR_ERR(reset_gpio);
|
|
|
|
+ export = of_property_read_bool(pdev->dev.of_node, "export");
|
|
+ if (export) {
|
|
+ gpiod_export(reset_gpio, false);
|
|
+ gpiod_export_link(&pdev->dev, "poweroff-gpio", reset_gpio);
|
|
+ }
|
|
+
|
|
pm_power_off = &gpio_poweroff_do_poweroff;
|
|
return 0;
|
|
}
|
|
@@ -87,6 +94,8 @@ static int gpio_poweroff_remove(struct p
|
|
if (pm_power_off == &gpio_poweroff_do_poweroff)
|
|
pm_power_off = NULL;
|
|
|
|
+ gpiod_unexport(reset_gpio);
|
|
+
|
|
return 0;
|
|
}
|
|
|