msm8916-openwrt/target/linux/ath79/dts/tp9343_tplink_tl-wr941hp-v1.dts
Rosen Penev 74f2df9dbc ath79: mtd-cal-data removals
Replacement can be done with nvmem.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-06-09 12:24:15 +02:00

184 lines
3.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca956x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr941hp-v1", "qca,tp9343";
model = "TP-Link TL-WR941HP v1";
aliases {
label-mac-device = &wmac;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
re {
label = "blue:re";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wifi {
label = "blue:wifi";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wan_blue {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wan_red {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
re {
label = "range extender button";
linux,code = <BTN_0>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wifi {
label = "wifi button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
label = "reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x0 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x730000>;
};
config: partition@750000 {
label = "config";
reg = <0x750000 0x0a0000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_config_8: macaddr@8 {
compatible = "mac-base";
reg = <0x8 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
};
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
nvmem-cells = <&macaddr_config_8 1>;
nvmem-cell-names = "mac-address";
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_config_8 0>;
nvmem-cell-names = "mac-address";
};
&wmac {
status = "okay";
nvmem-cells = <&macaddr_config_8 0>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};