msm8916-openwrt/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts
Rosen Penev 74f2df9dbc ath79: mtd-cal-data removals
Replacement can be done with nvmem.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-06-09 12:24:15 +02:00

102 lines
1.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9563_tplink_re450.dtsi"
/ {
compatible = "tplink,re455-v1", "qca,qca9563";
model = "TP-Link RE455 v1";
aliases {
label-mac-device = &eth0;
};
};
&partitions {
partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "info";
reg = <0x020000 0x002000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
compatible = "mac-base";
reg = <0x8 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@22000 {
label = "partition-table";
reg = <0x022000 0x002000>;
read-only;
};
partition@24000 {
label = "info2";
reg = <0x024000 0x00a000>;
read-only;
};
partition@2e000 {
label = "config";
reg = <0x02e000 0x022000>;
read-only;
};
partition@50000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x050000 0x7a0000>;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
cal_art_5000: calibration@5000 {
reg = <0x5000 0x844>;
};
};
};
};
&eth0 {
nvmem-cells = <&macaddr_info_8 0>;
nvmem-cell-names = "mac-address";
};
&pcie {
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&cal_art_5000>, <&macaddr_info_8 1>;
nvmem-cell-names = "calibration", "mac-address";
};
};
&wmac {
nvmem-cells = <&macaddr_info_8 0>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};