msm8916-openwrt/target/linux/ath79/dts/qca9561_tplink_archer-c60-v3.dts
Rosen Penev 74f2df9dbc ath79: mtd-cal-data removals
Replacement can be done with nvmem.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-06-09 12:24:15 +02:00

125 lines
2.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/leds/common.h>
#include "qca9561_tplink_archer-c6x.dtsi"
/ {
compatible = "tplink,archer-c60-v3", "qca,qca9561";
model = "TP-Link Archer C60 v3";
aliases {
label-mac-device = &eth1;
};
};
&leds {
wan_amber {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
&pcie {
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&precal_art_5000>, <&macaddr_info_8 (-1)>;
nvmem-cell-names = "pre-calibration", "mac-address";
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "factory-boot";
reg = <0x000000 0x01fb00>;
read-only;
};
partition@1fb00 {
label = "info";
reg = <0x01fb00 0x000500>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
compatible = "mac-base";
reg = <0x8 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@20000 {
label = "u-boot";
reg = <0x020000 0x010000>;
read-only;
};
partition@30000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x030000 0x7a0000>;
};
partition@7d0000 {
label = "tplink";
reg = <0x7d0000 0x020000>;
read-only;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
precal_art_5000: pre-calibration@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
};
};
&eth0 {
nvmem-cells = <&macaddr_info_8 1>;
nvmem-cell-names = "mac-address";
};
&eth1 {
nvmem-cells = <&macaddr_info_8 0>;
nvmem-cell-names = "mac-address";
};
&wmac {
nvmem-cells = <&macaddr_info_8 0>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};