msm8916-openwrt/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi
Rosen Penev 74f2df9dbc ath79: mtd-cal-data removals
Replacement can be done with nvmem.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-06-09 12:24:15 +02:00

139 lines
2.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
led-boot = &led_link4;
led-failsafe = &led_link4;
led-running = &led_link4;
led-upgrade = &led_link4;
label-mac-device = &wmac;
};
leds: leds {
compatible = "gpio-leds";
link1 {
label = "green:link1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
link2 {
label = "green:link2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
link3 {
label = "green:link3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_link4: link4 {
label = "green:link4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "partition-table";
reg = <0x020000 0x010000>;
read-only;
};
info: partition@30000 {
label = "info";
reg = <0x030000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
reg = <0x8 0x6>;
};
};
};
partition@40000 {
label = "firmware";
reg = <0x040000 0x780000>;
compatible = "tplink,firmware";
};
config: partition@7c0000 {
label = "config";
reg = <0x7c0000 0x030000>;
read-only;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
};
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};
&wmac {
status = "okay";
nvmem-cells = <&macaddr_info_8>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};