msm8916-openwrt/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
Rosen Penev 74f2df9dbc ath79: mtd-cal-data removals
Replacement can be done with nvmem.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-06-09 12:24:15 +02:00

201 lines
3.4 KiB
Plaintext

#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
label-mac-device = &eth0;
};
keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
right {
label = "button right";
linux,code = <BTN_0>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
left {
label = "button left";
linux,code = <BTN_1>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb_power {
gpio-export,name = "usb_power";
gpio-export,output = <1>;
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
// Colors for non-Lite versions
led_status: status {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_wlan: wlan {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
i2c: i2c {
compatible = "i2c-gpio";
sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
};
};
&pcie0 {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
nor_firmware: partition@50000 {
label = "nor_firmware";
reg = <0x050000 0xfa0000>;
};
partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
compatible = "mac-base";
reg = <0x0 0x6>;
#nvmem-cell-cells = <1>;
};
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
};
};
};
};
nand_flash: flash@1 {
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
nand_kernel: partition@0 {
label = "nand_kernel";
reg = <0x000000 0x400000>;
};
nand_ubi: partition@400000 {
label = "nand_ubi";
reg = <0x400000 0x7c00000>;
};
};
};
};
&usb0 {
status = "okay";
};
&usb_phy {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
nvmem-cells = <&macaddr_art_0 0>;
nvmem-cell-names = "mac-address";
};
&eth1 {
nvmem-cells = <&macaddr_art_0 1>;
nvmem-cell-names = "mac-address";
};
&wmac {
status = "okay";
nvmem-cells = <&cal_art_1000>;
nvmem-cell-names = "calibration";
};
&pinmux {
pinctrl-names = "default";
pinctrl-0 = <&enable_gpio17>;
enable_gpio17: pinmux_enable_gpio17 {
pinctrl-single,bits = <0x10 0x0000 0xff00>;
};
};