msm8916-openwrt/target/linux/ath79/dts/ar9344_mikrotik_routerboard.dtsi
Tomasz Maciej Nowak 173d864253 ath79: mikrotik: stack ar9344 devices to single dtsi
Most of boards from MikroTik with AR9344 SoC (supported and
un-supported) replicate the same schematic, so stack common device nodes
to a single dtsi.

ar9344_mikrotik_routerboard-16m-nor.dtsi:
- remove include paragraph and wmac node, make it single nor flash node
  for others dts to include

ar9344_mikrotik_routerboard-lhg-5nd.dts:
- move all of the nodes to new file ar9344_mikrotik_routerboard.dtsi
  and leave only power, user and lan LEDs which differ from sxt-5nd-r2
  and other yet unsupported devices

ar9344_mikrotik_routerboard-sxt-5n.dtsi:
- remove, it made no sense to keep it, as only
  ar9344_mikrotik_routerboard-sxt-5nd-r2.dts included this file and
  added only compatible and model

ar9344_mikrotik_routerboard-sxt-5nd-r2.dts:
- include ar9344_mikrotik_routerboard.dtsi
- add nand gpio activating node, beeper, additional LEDs and flash chips
  which previously have been in ar9344_mikrotik_routerboard-sxt-5n.dtsi

ar9344_mikrotik_routerboard.dtsi:
- inherited most of the content from ar9344_mikrotik_routerboard-lhg-5nd.dts
  except three LEDs
- add wmac node, removed from ar9344_mikrotik_routerboard-16m-nor.dtsi

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-02-26 22:22:48 +01:00

79 lines
1.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
led-boot = &led_user;
led-failsafe = &led_user;
led-running = &led_user;
led-upgrade = &led_user;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds: leds {
compatible = "gpio-leds";
rssilow {
label = "green:rssilow";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
rssimediumlow {
label = "green:rssimediumlow";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
rssimedium {
label = "green:rssimedium";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
rssimediumhigh {
label = "green:rssimediumhigh";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
rssihigh {
label = "green:rssihigh";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
qca,no-eeprom;
};