msm8916-openwrt/target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts
Rosen Penev 74f2df9dbc ath79: mtd-cal-data removals
Replacement can be done with nvmem.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-06-09 12:24:15 +02:00

134 lines
2.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/leds/common.h>
#include "ar9341_tplink.dtsi"
/ {
model = "TP-Link TL-WR842N/ND v2";
compatible = "tplink,tl-wr842n-v2", "qca,ar9341";
aliases {
label-mac-device = &wmac;
};
keys {
compatible = "gpio-keys";
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb_power {
gpio-export,name = "tp-link:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
};
};
&leds {
usb {
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_uboot_1fc00: macaddr@1fc00 {
compatible = "mac-base";
reg = <0x1fc00 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x7d0000>;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
};
};
};
};
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};
&eth0 {
nvmem-cells = <&macaddr_uboot_1fc00 (-1)>;
nvmem-cell-names = "mac-address";
};
&eth1 {
phy-handle = <&swphy4>;
nvmem-cells = <&macaddr_uboot_1fc00 0>;
nvmem-cell-names = "mac-address";
};
&wmac {
nvmem-cells = <&macaddr_uboot_1fc00 0>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};