msm8916-openwrt/target/linux/ath79/dts/ar7240_ruckus_zf7025.dts
Christian Marangi e3ddfcc70c
ath79: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:34 +01:00

202 lines
3.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7240.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Ruckus ZoneFlex 7025";
compatible = "ruckus,zf7025", "qca,ar7240";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_red;
label-mac-device = &eth0;
};
keys {
compatible = "gpio-keys";
hard-reset {
label = "hard-reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds: leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
dir {
label = "green:dir";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "green:lan1";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "green:lan2";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "green:lan3";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "green:lan4";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan5 {
label = "green:lan5";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
opt {
label = "green:opt";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
led_power_red: power-red {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led_power_green: power-green {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan-green {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0assoc";
};
wlan-yellow {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_YELLOW>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
ruckus-himem@3ff0000 {
/* Ruckus Himem area used to control
* redundant boot image selection
*/
compatible = "nvmem-rmem";
reg = <0x3ff0000 0x10000>;
no-map;
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x40000>;
label = "u-boot";
read-only;
};
/* On stock FW this encompasses rcks_wlan.main,
* rcks_wlan.bkup and datafs partitions
*/
partition@40000 {
compatible = "openwrt,uimage", "denx,uimage";
reg = <0x40000 0xf40000>;
label = "firmware";
};
partition@f80000 {
compatible = "u-boot,env";
reg = <0xf80000 0x40000>;
label = "u-boot-env";
};
board_data: partition@fc0000 {
reg = <0xfc0000 0x40000>;
label = "board-data";
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_board_data_60: macaddr@60 {
reg = <0x60 0x6>;
};
macaddr_board_data_66: macaddr@66 {
reg = <0x66 0x6>;
};
macaddr_board_data_6c: macaddr@6c {
reg = <0x6c 0x6>;
};
};
};
};
};
};
&eth0 {
nvmem-cells = <&macaddr_board_data_66>;
nvmem-cell-names = "mac-address";
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_board_data_6c>;
nvmem-cell-names = "mac-address";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002b";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&macaddr_board_data_60>;
nvmem-cell-names = "mac-address";
};
};