Archived
1
0
This repository has been archived on 2024-07-22. You can view files and clone it, but cannot push or open issues or pull requests.
archive/target/linux/ipq806x/patches-4.1
Jonas Gorski 9a2c2d63e8 ipq806x: ap148/r7500: fix eth0 for non gige speeds
Eth0 is attached to mac0 of the switch with a fixed link and and not to
phy4 in single phy mode, so configuring it to anything but 1000FD will
break the connection, which will happen if a only 100 Mbit capapble device
is plugged into the wan port.

Fix this by not taking the state from phy4 and just configuring a fixed link
for eth0.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47695
2015-12-02 22:16:23 +00:00
..
020-add-ap148-bootargs.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
021-add-ap148-partitions.patch ipq806x: switch AP148 to using SMEM based MTD parser 2015-08-17 06:18:15 +00:00
022-add-db149-dts.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
024-ap148-add-memory-node.patch ipq806x: add support for non-dt enabled ap148 bootloader 2015-08-04 23:09:43 +00:00
030-hwspinlock-core-add-device-tree-support.patch ipq806x: add hwspinlock support 2015-08-17 06:17:47 +00:00
031-hwspinlock-qcom-Add-support-for-Qualcomm-HW-Mutex-bl.patch ipq806x: add hwspinlock support 2015-08-17 06:17:47 +00:00
032-hwspinlock-qcom-Correct-msb-in-regmap_field.patch ipq806x: add hwspinlock support 2015-08-17 06:17:47 +00:00
033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch ipq806x: add hwspinlock support 2015-08-17 06:17:47 +00:00
034-soc-qcom-Add-device-tree-binding-for-SMEM.patch ipq806x: add SMEM support 2015-08-17 06:17:58 +00:00
035-soc-qcom-Add-Shared-Memory-Manager-driver.patch ipq806x: add SMEM support 2015-08-17 06:17:58 +00:00
036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch ipq806x: add SMEM support 2015-08-17 06:17:58 +00:00
037-mtd-add-SMEM-parser-for-QCOM-platforms.patch kernel: update 4.1 to 4.1.10 2015-10-04 11:34:39 +00:00
110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file 2015-11-21 10:54:58 +00:00
113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
114-pcie-add-ctlr-init.patch ipq806x: fix PCIe reset gpio handling - the core already handles the active-low flag 2015-11-21 10:55:29 +00:00
115-add-pcie-aux-clk-dts.patch ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file 2015-11-21 10:54:58 +00:00
126-add-rpm-to-ipq8064-dts.patch ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file 2015-11-21 10:54:58 +00:00
133-ARM-Add-Krait-L2-register-accessor-functions.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
134-clk-mux-Split-out-register-accessors-for-reuse.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch kernel: update 4.1 to 4.1.4 2015-08-05 13:55:14 +00:00
136-clk-Add-safe-switch-hook.patch kernel: update 4.1 to 4.1.4 2015-08-05 13:55:14 +00:00
137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
138-clk-qcom-Add-HFPLL-driver.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
140-clk-qcom-Add-support-for-Krait-clocks.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
142-clk-qcom-Add-Krait-clock-controller-driver.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file 2015-11-21 10:54:58 +00:00
145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch ipq806x: fix uninitialized variable usage in cpufreq-krait 2015-09-10 10:09:42 +00:00
155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch ipq806x: Add ADM support 2015-08-07 08:36:16 +00:00
156-dmaengine-Add-ADM-driver.patch ipq806x: Add ADM support 2015-08-07 08:36:16 +00:00
157-ARM-DT-ipq8064-Add-ADM-device-node.patch ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file 2015-11-21 10:54:58 +00:00
161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch ipq806x: add NAND flash controller support 2015-08-07 08:36:31 +00:00
162-mtd-nand-Qualcomm-NAND-controller-driver.patch ipq806x: add NAND flash controller support 2015-08-07 08:36:31 +00:00
163-dt-bindings-qcom_nandc-Add-DT-bindings.patch ipq806x: add NAND flash controller support 2015-08-07 08:36:31 +00:00
164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file 2015-11-21 10:54:58 +00:00
165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file 2015-11-21 10:54:58 +00:00
166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file 2015-11-21 10:54:58 +00:00
300-arch-arm-force-ZRELADDR-on-arch-qcom.patch kernel: update kernel 4.1 to version 4.1.11 2015-10-25 17:32:01 +00:00
301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch ipq806x: ap148/r7500: fix eth0 for non gige speeds 2015-12-02 22:16:23 +00:00
302-mtd-qcom-smem-rename-rootfs-ubi.patch ipq806x: rename "rootfs" to "ubi" on nand 2015-09-04 14:44:44 +00:00
700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch ipq806x: update bleeding-edge kernel from 4.0 to 4.1 2015-08-04 23:09:38 +00:00
701-stmmac_update_to_4.3.patch ipq806x: update stmmac to the version from linux 4.3 2015-11-22 19:06:51 +00:00
707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file 2015-11-21 10:54:58 +00:00
708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch ipq806x: ap148/r7500: fix eth0 for non gige speeds 2015-12-02 22:16:23 +00:00
709-stmac-platform-add-support-for-retreiving-mac-from-m.patch ipq806x: update stmmac to the version from linux 4.3 2015-11-22 19:06:51 +00:00
710-stmmac-fix-ipq806x-DMA-configuration.patch ipq806x: another fix to the stmmac DMA configuration to fix remaining data corruption issues 2015-11-22 21:59:22 +00:00