Archived
1
0
This repository has been archived on 2024-07-22. You can view files and clone it, but cannot push or open issues or pull requests.
archive/target/linux/generic/patches-4.1/726-phy_rtl8366.patch
Jonas Gorski e4528126de generic: add linux 4.1 support
Boot tested: http://pastebin.com/L6aAb9xj

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo:
  update to 4.1 final
  add patches added since submission
  delete patches applied in later rcs
  restore commit messages in 220-gc-sections and 304-mips_disable_fpu
  fix 050-backport_netfilter_rtcache to match new API
  update inlined dma ops with upstream changes
  add missing config symbols
  enabled CONFIG_MULTIUSER
  update kmod defintions for 4.1
]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46112
2015-06-22 12:27:59 +00:00

46 lines
1.3 KiB
Diff

--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -251,6 +251,30 @@ config MDIO_BCM_UNIMAC
controllers as well as some Broadcom Ethernet switches such as the
Starfighter 2 switches.
+config RTL8366_SMI
+ tristate "Driver for the RTL8366 SMI interface"
+ depends on GPIOLIB
+ ---help---
+ This module implements the SMI interface protocol which is used
+ by some RTL8366 ethernet switch devices via the generic GPIO API.
+
+if RTL8366_SMI
+
+config RTL8366_SMI_DEBUG_FS
+ bool "RTL8366 SMI interface debugfs support"
+ depends on DEBUG_FS
+ default n
+
+config RTL8366S_PHY
+ tristate "Driver for the Realtek RTL8366S switch"
+ select SWCONFIG
+
+config RTL8366RB_PHY
+ tristate "Driver for the Realtek RTL8366RB switch"
+ select SWCONFIG
+
+endif # RTL8366_SMI
+
endif # PHYLIB
config MICREL_KS8995MA
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -24,6 +24,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
+obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o