Openwrt/archive
Archived
1
0
Fork 0
Code
This repository has been archived on 2024-07-22. You can view files and clone it, but cannot push or open issues or pull requests.
master
archive/target/linux/generic/patches-3.18/027-bcma-from-4.1.patch
Rafał Miłecki a4532040b1 kernel: backport rest of bcma patches 
This backports
bcma: allow disabling (not building) PCI driver
Revert "bcma: Kconfig: Let it depend on PCI"

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44970
2015-03-24 10:39:10 +00:00

681 lines
21 KiB
Diff
Raw Permalink Blame History

--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -26,6 +26,7 @@ bool bcma_wait_value(struct bcma_device
int timeout);
void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
void bcma_init_bus(struct bcma_bus *bus);
+void bcma_unregister_cores(struct bcma_bus *bus);
int bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus);
@@ -42,6 +43,9 @@ int bcma_bus_scan(struct bcma_bus *bus);
int bcma_sprom_get(struct bcma_bus *bus);
/* driver_chipcommon.c */
+void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
#ifdef CONFIG_BCMA_DRIVER_MIPS
void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
extern struct platform_device bcma_pflash_dev;
@@ -52,6 +56,8 @@ int bcma_core_chipcommon_b_init(struct b
void bcma_core_chipcommon_b_free(struct bcma_drv_cc_b *ccb);
/* driver_chipcommon_pmu.c */
+void bcma_pmu_early_init(struct bcma_drv_cc *cc);
+void bcma_pmu_init(struct bcma_drv_cc *cc);
u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
@@ -100,7 +106,35 @@ static inline void __exit bcma_host_soc_
#endif /* CONFIG_BCMA_HOST_SOC && CONFIG_OF */
/* driver_pci.c */
+#ifdef CONFIG_BCMA_DRIVER_PCI
u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
+void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
+void bcma_core_pci_init(struct bcma_drv_pci *pc);
+void bcma_core_pci_up(struct bcma_drv_pci *pc);
+void bcma_core_pci_down(struct bcma_drv_pci *pc);
+#else
+static inline void bcma_core_pci_early_init(struct bcma_drv_pci *pc)
+{
+ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
+}
+static inline void bcma_core_pci_init(struct bcma_drv_pci *pc)
+{
+ /* Initialization is required for PCI hosted bus */
+ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
+}
+#endif
+
+/* driver_pcie2.c */
+#ifdef CONFIG_BCMA_DRIVER_PCI
+void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2);
+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2);
+#else
+static inline void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
+{
+ /* Initialization is required for PCI hosted bus */
+ WARN_ON(pcie2->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
+}
+#endif
extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
@@ -117,6 +151,39 @@ static inline void bcma_core_pci_hostmod
}
#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
+/**************************************************
+ * driver_mips.c
+ **************************************************/
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+#else
+static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+{
+ return 0;
+}
+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+{
+}
+static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore)
+{
+}
+#endif
+
+/**************************************************
+ * driver_gmac_cmn.c
+ **************************************************/
+
+#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN
+void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc);
+#else
+static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc)
+{
+}
+#endif
+
#ifdef CONFIG_BCMA_DRIVER_GPIO
/* driver_gpio.c */
int bcma_gpio_init(struct bcma_drv_cc *cc);
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -17,6 +17,8 @@
#include "bcma_private.h"
+#define BCMA_GPIO_MAX_PINS 32
+
static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip)
{
return container_of(chip, struct bcma_drv_cc, gpio);
@@ -76,7 +78,7 @@ static void bcma_gpio_free(struct gpio_c
bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
}
-#if IS_BUILTIN(CONFIG_BCM47XX)
+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
@@ -204,6 +206,7 @@ static void bcma_gpio_irq_domain_exit(st
int bcma_gpio_init(struct bcma_drv_cc *cc)
{
+ struct bcma_bus *bus = cc->core->bus;
struct gpio_chip *chip = &cc->gpio;
int err;
@@ -215,14 +218,14 @@ int bcma_gpio_init(struct bcma_drv_cc *c
chip->set = bcma_gpio_set_value;
chip->direction_input = bcma_gpio_direction_input;
chip->direction_output = bcma_gpio_direction_output;
-#if IS_BUILTIN(CONFIG_BCM47XX)
+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
chip->to_irq = bcma_gpio_to_irq;
#endif
#if IS_BUILTIN(CONFIG_OF)
if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
chip->of_node = cc->core->dev.of_node;
#endif
- switch (cc->core->bus->chipinfo.id) {
+ switch (bus->chipinfo.id) {
case BCMA_CHIP_ID_BCM5357:
case BCMA_CHIP_ID_BCM53572:
chip->ngpio = 32;
@@ -231,13 +234,17 @@ int bcma_gpio_init(struct bcma_drv_cc *c
chip->ngpio = 16;
}
- /* There is just one SoC in one device and its GPIO addresses should be
- * deterministic to address them more easily. The other buses could get
- * a random base number. */
- if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
- chip->base = 0;
- else
- chip->base = -1;
+ /*
+ * On MIPS we register GPIO devices (LEDs, buttons) using absolute GPIO
+ * pin numbers. We don't have Device Tree there and we can't really use
+ * relative (per chip) numbers.
+ * So let's use predictable base for BCM47XX and "random" for all other.
+ */
+#if IS_BUILTIN(CONFIG_BCM47XX)
+ chip->base = bus->num * BCMA_GPIO_MAX_PINS;
+#else
+ chip->base = -1;
+#endif
err = bcma_gpio_irq_domain_init(cc);
if (err)
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm
}
EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
-int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
- bool enable)
-{
- struct pci_dev *pdev;
- u32 coremask, tmp;
- int err = 0;
-
- if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
- /* This bcma device is not on a PCI host-bus. So the IRQs are
- * not routed through the PCI core.
- * So we must not enable routing through the PCI core. */
- goto out;
- }
-
- pdev = pc->core->bus->host_pci;
-
- err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
- if (err)
- goto out;
-
- coremask = BIT(core->core_index) << 8;
- if (enable)
- tmp |= coremask;
- else
- tmp &= ~coremask;
-
- err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
-
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
-
static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
{
u32 w;
@@ -328,28 +295,12 @@ static void bcma_core_pci_extend_L1timer
bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
}
-void bcma_core_pci_up(struct bcma_bus *bus)
+void bcma_core_pci_up(struct bcma_drv_pci *pc)
{
- struct bcma_drv_pci *pc;
-
- if (bus->hosttype != BCMA_HOSTTYPE_PCI)
- return;
-
- pc = &bus->drv_pci[0];
-
bcma_core_pci_extend_L1timer(pc, true);
}
-EXPORT_SYMBOL_GPL(bcma_core_pci_up);
-void bcma_core_pci_down(struct bcma_bus *bus)
+void bcma_core_pci_down(struct bcma_drv_pci *pc)
{
- struct bcma_drv_pci *pc;
-
- if (bus->hosttype != BCMA_HOSTTYPE_PCI)
- return;
-
- pc = &bus->drv_pci[0];
-
bcma_core_pci_extend_L1timer(pc, false);
}
-EXPORT_SYMBOL_GPL(bcma_core_pci_down);
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
@@ -11,6 +11,7 @@
#include "bcma_private.h"
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/export.h>
#include <linux/bcma/bcma.h>
#include <asm/paccess.h>
--- a/drivers/bcma/driver_pcie2.c
+++ b/drivers/bcma/driver_pcie2.c
@@ -10,6 +10,7 @@
#include "bcma_private.h"
#include <linux/bcma/bcma.h>
+#include <linux/pci.h>
/**************************************************
* R/W ops.
@@ -156,14 +157,23 @@ static void pciedev_reg_pm_clk_period(st
void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
{
- struct bcma_chipinfo *ci = &pcie2->core->bus->chipinfo;
+ struct bcma_bus *bus = pcie2->core->bus;
+ struct bcma_chipinfo *ci = &bus->chipinfo;
u32 tmp;
tmp = pcie2_read32(pcie2, BCMA_CORE_PCIE2_SPROM(54));
if ((tmp & 0xe) >> 1 == 2)
bcma_core_pcie2_cfg_write(pcie2, 0x4e0, 0x17);
- /* TODO: Do we need pcie_reqsize? */
+ switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM4360:
+ case BCMA_CHIP_ID_BCM4352:
+ pcie2->reqsize = 1024;
+ break;
+ default:
+ pcie2->reqsize = 128;
+ break;
+ }
if (ci->id == BCMA_CHIP_ID_BCM4360 && ci->rev > 3)
bcma_core_pcie2_war_delay_perst_enab(pcie2, true);
@@ -173,3 +183,18 @@ void bcma_core_pcie2_init(struct bcma_dr
pciedev_crwlpciegen2_180(pcie2);
pciedev_crwlpciegen2_182(pcie2);
}
+
+/**************************************************
+ * Runtime ops.
+ **************************************************/
+
+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2)
+{
+ struct bcma_bus *bus = pcie2->core->bus;
+ struct pci_dev *dev = bus->host_pci;
+ int err;
+
+ err = pcie_set_readrq(dev, pcie2->reqsize);
+ if (err)
+ bcma_err(bus, "Error setting PCI_EXP_DEVCTL_READRQ: %d\n", err);
+}
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -213,16 +213,26 @@ static int bcma_host_pci_probe(struct pc
/* Initialize struct, detect chip */
bcma_init_bus(bus);
+ /* Scan bus to find out generation of PCIe core */
+ err = bcma_bus_scan(bus);
+ if (err)
+ goto err_pci_unmap_mmio;
+
+ if (bcma_find_core(bus, BCMA_CORE_PCIE2))
+ bus->host_is_pcie2 = true;
+
/* Register */
err = bcma_bus_register(bus);
if (err)
- goto err_pci_unmap_mmio;
+ goto err_unregister_cores;
pci_set_drvdata(dev, bus);
out:
return err;
+err_unregister_cores:
+ bcma_unregister_cores(bus);
err_pci_unmap_mmio:
pci_iounmap(dev, bus->mmio);
err_pci_release_regions:
@@ -283,9 +293,12 @@ static const struct pci_device_id bcma_p
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43b1) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */
@@ -310,3 +323,65 @@ void __exit bcma_host_pci_exit(void)
{
pci_unregister_driver(&bcma_pci_bridge_driver);
}
+
+/**************************************************
+ * Runtime ops for drivers.
+ **************************************************/
+
+/* See also pcicore_up */
+void bcma_host_pci_up(struct bcma_bus *bus)
+{
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+ return;
+
+ if (bus->host_is_pcie2)
+ bcma_core_pcie2_up(&bus->drv_pcie2);
+ else
+ bcma_core_pci_up(&bus->drv_pci[0]);
+}
+EXPORT_SYMBOL_GPL(bcma_host_pci_up);
+
+/* See also pcicore_down */
+void bcma_host_pci_down(struct bcma_bus *bus)
+{
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+ return;
+
+ if (!bus->host_is_pcie2)
+ bcma_core_pci_down(&bus->drv_pci[0]);
+}
+EXPORT_SYMBOL_GPL(bcma_host_pci_down);
+
+/* See also si_pci_setup */
+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
+ bool enable)
+{
+ struct pci_dev *pdev;
+ u32 coremask, tmp;
+ int err = 0;
+
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
+ /* This bcma device is not on a PCI host-bus. So the IRQs are
+ * not routed through the PCI core.
+ * So we must not enable routing through the PCI core. */
+ goto out;
+ }
+
+ pdev = bus->host_pci;
+
+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
+ if (err)
+ goto out;
+
+ coremask = BIT(core->core_index) << 8;
+ if (enable)
+ tmp |= coremask;
+ else
+ tmp &= ~coremask;
+
+ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
+
+out:
+ return err;
+}
+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -363,7 +363,7 @@ static int bcma_register_devices(struct
return 0;
}
-static void bcma_unregister_cores(struct bcma_bus *bus)
+void bcma_unregister_cores(struct bcma_bus *bus)
{
struct bcma_device *core, *tmp;
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4770,7 +4770,7 @@ static void b43_wireless_core_exit(struc
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
- bcma_core_pci_down(dev->dev->bdev->bus);
+ bcma_host_pci_down(dev->dev->bdev->bus);
break;
#endif
#ifdef CONFIG_B43_SSB
@@ -4817,9 +4817,9 @@ static int b43_wireless_core_init(struct
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
+ bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
dev->dev->bdev, true);
- bcma_core_pci_up(dev->dev->bdev->bus);
+ bcma_host_pci_up(dev->dev->bdev->bus);
break;
#endif
#ifdef CONFIG_B43_SSB
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -4669,7 +4669,7 @@ static int brcms_b_attach(struct brcms_c
brcms_c_coredisable(wlc_hw);
/* Match driver "down" state */
- bcma_core_pci_down(wlc_hw->d11core->bus);
+ bcma_host_pci_down(wlc_hw->d11core->bus);
/* turn off pll and xtal to match driver "down" state */
brcms_b_xtal(wlc_hw, OFF);
@@ -4960,7 +4960,7 @@ static int brcms_b_up_prep(struct brcms_
* Configure pci/pcmcia here instead of in brcms_c_attach()
* to allow mfg hotswap: down, hotswap (chip power cycle), up.
*/
- bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci[0], wlc_hw->d11core,
+ bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
true);
/*
@@ -4970,12 +4970,12 @@ static int brcms_b_up_prep(struct brcms_
*/
if (brcms_b_radio_read_hwdisabled(wlc_hw)) {
/* put SB PCI in down state again */
- bcma_core_pci_down(wlc_hw->d11core->bus);
+ bcma_host_pci_down(wlc_hw->d11core->bus);
brcms_b_xtal(wlc_hw, OFF);
return -ENOMEDIUM;
}
- bcma_core_pci_up(wlc_hw->d11core->bus);
+ bcma_host_pci_up(wlc_hw->d11core->bus);
/* reset the d11 core */
brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS);
@@ -5172,7 +5172,7 @@ static int brcms_b_down_finish(struct br
/* turn off primary xtal and pll */
if (!wlc_hw->noreset) {
- bcma_core_pci_down(wlc_hw->d11core->bus);
+ bcma_host_pci_down(wlc_hw->d11core->bus);
brcms_b_xtal(wlc_hw, OFF);
}
}
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -434,6 +434,27 @@ static inline struct bcma_device *bcma_f
return bcma_find_core_unit(bus, coreid, 0);
}
+#ifdef CONFIG_BCMA_HOST_PCI
+extern void bcma_host_pci_up(struct bcma_bus *bus);
+extern void bcma_host_pci_down(struct bcma_bus *bus);
+extern int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
+ struct bcma_device *core, bool enable);
+#else
+static inline void bcma_host_pci_up(struct bcma_bus *bus)
+{
+}
+static inline void bcma_host_pci_down(struct bcma_bus *bus)
+{
+}
+static inline int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
+ struct bcma_device *core, bool enable)
+{
+ if (bus->hosttype == BCMA_HOSTTYPE_PCI)
+ return -ENOTSUPP;
+ return 0;
+}
+#endif
+
extern bool bcma_core_is_enabled(struct bcma_device *core);
extern void bcma_core_disable(struct bcma_device *core, u32 flags);
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -238,13 +238,13 @@ struct bcma_drv_pci {
#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
-extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
-extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
-extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
- struct bcma_device *core, bool enable);
-extern void bcma_core_pci_up(struct bcma_bus *bus);
-extern void bcma_core_pci_down(struct bcma_bus *bus);
+#ifdef CONFIG_BCMA_DRIVER_PCI
extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
+#else
+static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
+{
+}
+#endif
extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
--- a/include/linux/bcma/bcma_driver_pcie2.h
+++ b/include/linux/bcma/bcma_driver_pcie2.h
@@ -143,6 +143,8 @@
struct bcma_drv_pcie2 {
struct bcma_device *core;
+
+ u16 reqsize;
};
#define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset)
@@ -153,6 +155,4 @@ struct bcma_drv_pcie2 {
#define pcie2_set32(pcie2, offset, set) bcma_set32((pcie2)->core, offset, set)
#define pcie2_mask32(pcie2, offset, mask) bcma_mask32((pcie2)->core, offset, mask)
-void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2);
-
#endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
config BCMA_HOST_PCI
bool "Support for BCMA on PCI-host bus"
depends on BCMA_HOST_PCI_POSSIBLE
+ select BCMA_DRIVER_PCI
default y
config BCMA_DRIVER_PCI_HOSTMODE
@@ -44,6 +45,22 @@ config BCMA_HOST_SOC
If unsure, say N
+config BCMA_DRIVER_PCI
+ bool "BCMA Broadcom PCI core driver"
+ depends on BCMA && PCI
+ default y
+ help
+ BCMA bus may have many versions of PCIe core. This driver
+ supports:
+ 1) PCIe core working in clientmode
+ 2) PCIe Gen 2 clientmode core
+
+ In general PCIe (Gen 2) clientmode core is required on PCIe
+ hosted buses. It's responsible for initialization and basic
+ hardware management.
+ This driver is also prerequisite for a hostmode PCIe core
+ support.
+
config BCMA_DRIVER_MIPS
bool "BCMA Broadcom MIPS core driver"
depends on BCMA && MIPS
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -3,8 +3,8 @@ bcma-y += driver_chipcommon.o driver
bcma-y += driver_chipcommon_b.o
bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o
-bcma-y += driver_pci.o
-bcma-y += driver_pcie2.o
+bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pci.o
+bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pcie2.o
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -663,14 +663,6 @@ struct bcma_drv_cc_b {
#define bcma_cc_maskset32(cc, offset, mask, set) \
bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
-extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
-extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
-
-extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
-extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
-
-void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
-
extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
@@ -690,9 +682,6 @@ u32 bcma_chipco_gpio_pullup(struct bcma_
u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
/* PMU support */
-extern void bcma_pmu_init(struct bcma_drv_cc *cc);
-extern void bcma_pmu_early_init(struct bcma_drv_cc *cc);
-
extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
u32 value);
extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset,
--- a/include/linux/bcma/bcma_driver_gmac_cmn.h
+++ b/include/linux/bcma/bcma_driver_gmac_cmn.h
@@ -91,10 +91,4 @@ struct bcma_drv_gmac_cmn {
#define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val)
#define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val)
-#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN
-extern void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc);
-#else
-static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { }
-#endif
-
#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -39,21 +39,6 @@ struct bcma_drv_mips {
u8 early_setup_done:1;
};
-#ifdef CONFIG_BCMA_DRIVER_MIPS
-extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
-extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
-
-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
-#else
-static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
-static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
-
-static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
-{
- return 0;
-}
-#endif
-
extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
View Git Blame Copy Permalink