Openwrt/archive
Archived
1
0
Fork 0
Code
This repository has been archived on 2024-07-22. You can view files and clone it, but cannot push or open issues or pull requests.
master
archive/target/linux/adm8668/patches-3.18/005-tulip_platform.patch
Florian Fainelli a7647de50b adm8668: add 3.18 support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45094
2015-03-28 18:18:38 +00:00

491 lines
14 KiB
Diff
Raw Permalink Blame History

--- a/drivers/net/ethernet/dec/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -60,6 +60,14 @@ config TULIP_PCI
To compile this driver as a module, choose M here. The module will
be called tulip.
+config TULIP_PLATFORM
+ tristate "DECchip Tulip (dc2114x) Platform support"
+ depends on HAS_IOMEM
+ select TULIP
+ select CRC32
+ ---help---
+ This driver is for the platform variant.
+
config TULIP_MWI
bool "New bus configuration"
depends on TULIP_PCI
--- a/drivers/net/ethernet/dec/tulip/tulip_core.c
+++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
@@ -27,6 +27,8 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/tulip.h>
#include <linux/delay.h>
#include <linux/mii.h>
#include <linux/crc32.h>
@@ -204,6 +206,9 @@ struct tulip_chip_table tulip_tbl[] = {
{ "Conexant LANfinity", 256, 0x0001ebef,
HAS_MII | HAS_ACPI, tulip_timer, tulip_media_task },
+ { "Infineon ADM8668", 256, 0x0001a451,
+ MC_HASH_ONLY | COMET_MAC_ADDR, tulip_timer, tulip_media_task, },
+
};
@@ -377,6 +382,11 @@ static void tulip_up(struct net_device *
sizeof(tp->setup_frame),
PCI_DMA_TODEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ mapping = dma_map_single(&tp->pldev->dev, tp->setup_frame,
+ sizeof(tp->setup_frame),
+ DMA_TO_DEVICE);
+#endif
tp->tx_buffers[tp->cur_tx].skb = NULL;
tp->tx_buffers[tp->cur_tx].mapping = mapping;
@@ -396,6 +406,7 @@ static void tulip_up(struct net_device *
i = 0;
if (tp->mtable == NULL)
goto media_picked;
+
if (dev->if_port) {
int looking_for = tulip_media_cap[dev->if_port] & MediaIsMII ? 11 :
(dev->if_port == 12 ? 0 : dev->if_port);
@@ -489,6 +500,10 @@ media_picked:
iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88);
dev->if_port = tp->mii_cnt ? 11 : 0;
tp->csr6 = 0x00040000;
+ } else if (tp->chip_id == ADM8668) {
+ /* Enable automatic Tx underrun recovery. */
+ iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88);
+ tp->csr6 = 0x00040000;
} else if (tp->chip_id == AX88140) {
tp->csr6 = tp->mii_cnt ? 0x00040100 : 0x00000100;
} else
@@ -660,6 +675,10 @@ static void tulip_init_ring(struct net_d
mapping = pci_map_single(tp->pdev, skb->data,
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ mapping = dma_map_single(&tp->pldev->dev, skb->data,
+ PKT_BUF_SZ, DMA_FROM_DEVICE);
+#endif
tp->rx_buffers[i].mapping = mapping;
tp->rx_ring[i].status = cpu_to_le32(DescOwned); /* Owned by Tulip chip */
tp->rx_ring[i].buffer1 = cpu_to_le32(mapping);
@@ -696,6 +715,11 @@ tulip_start_xmit(struct sk_buff *skb, st
mapping = pci_map_single(tp->pdev, skb->data,
skb->len, PCI_DMA_TODEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ mapping = dma_map_single(&tp->pldev->dev, skb->data,
+ skb->len,
+ DMA_TO_DEVICE);
+#endif
tp->tx_buffers[entry].mapping = mapping;
tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
@@ -752,6 +776,13 @@ static void tulip_clean_tx_ring(struct t
sizeof(tp->setup_frame),
PCI_DMA_TODEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ dma_unmap_single(&tp->pldev->dev,
+ tp->tx_buffers[entry].mapping,
+ sizeof(tp->setup_frame),
+ DMA_TO_DEVICE);
+#endif
+
continue;
}
#ifdef CONFIG_TULIP_PCI
@@ -759,6 +790,11 @@ static void tulip_clean_tx_ring(struct t
tp->tx_buffers[entry].skb->len,
PCI_DMA_TODEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ dma_unmap_single(&tp->pldev->dev, tp->tx_buffers[entry].mapping,
+ tp->tx_buffers[entry].skb->len,
+ DMA_TO_DEVICE);
+#endif
/* Free the original skb. */
dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
@@ -836,6 +872,10 @@ static void tulip_free_ring (struct net_
pci_unmap_single(tp->pdev, mapping, PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ dma_unmap_single(&tp->pldev->dev, mapping, PKT_BUF_SZ,
+ DMA_FROM_DEVICE);
+#endif
dev_kfree_skb (skb);
}
}
@@ -848,6 +888,10 @@ static void tulip_free_ring (struct net_
pci_unmap_single(tp->pdev, tp->tx_buffers[i].mapping,
skb->len, PCI_DMA_TODEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ dma_unmap_single(&tp->pldev->dev, tp->tx_buffers[i].mapping,
+ skb->len, DMA_TO_DEVICE);
+#endif
dev_kfree_skb (skb);
}
tp->tx_buffers[i].skb = NULL;
@@ -902,6 +946,9 @@ static void tulip_get_drvinfo(struct net
#ifdef CONFIG_TULIP_PCI
strlcpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info));
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ strlcpy(info->bus_info, "platform", sizeof(info->bus_info));
+#endif
}
@@ -917,6 +964,9 @@ static int tulip_ethtool_set_wol(struct
#ifdef CONFIG_TULIP_PCI
device_set_wakeup_enable(tp->kdev, tp->wolinfo.wolopts);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ device_set_wakeup_enable(&tp->pldev->dev, tp->wolinfo.wolopts);
+#endif
return 0;
}
@@ -1192,13 +1242,20 @@ static void set_rx_mode(struct net_devic
}
+#ifdef CONFIG_TULIP_PCI
tp->tx_buffers[entry].skb = NULL;
tp->tx_buffers[entry].mapping =
-#ifdef CONFIG_TULIP_PCI
pci_map_single(tp->pdev, tp->setup_frame,
sizeof(tp->setup_frame),
PCI_DMA_TODEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ tp->tx_buffers[entry].skb = NULL;
+ tp->tx_buffers[entry].mapping =
+ dma_map_single(&tp->pldev->dev, tp->setup_frame,
+ sizeof(tp->setup_frame),
+ DMA_TO_DEVICE);
+#endif
/* Put the setup frame on the Tx list. */
if (entry == TX_RING_SIZE-1)
tx_flags |= DESC_RING_WRAP; /* Wrap ring. */
@@ -1218,6 +1275,9 @@ static void set_rx_mode(struct net_devic
spin_unlock_irqrestore(&tp->lock, flags);
}
+ if (tp->chip_id == ADM8668)
+ csr6 |= (1 << 9); /* force 100Mbps full duplex */
+
iowrite32(csr6, ioaddr + CSR6);
}
@@ -1984,6 +2044,126 @@ static void tulip_remove_one(struct pci_
}
#endif /* CONFIG_TULIP_PCI */
+#ifdef CONFIG_TULIP_PLATFORM
+static int tulip_probe(struct platform_device *pdev)
+{
+ struct tulip_private *tp;
+ struct tulip_platform_data *pdata;
+ struct net_device *dev;
+ struct resource *res;
+ void __iomem *ioaddr;
+ int irq;
+
+ if (pdev->id < 0 || pdev->id >= MAX_UNITS)
+ return -EINVAL;
+
+ if (!(res = platform_get_resource(pdev, IORESOURCE_IRQ, 0)))
+ return -ENODEV;
+ irq = res->start;
+ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
+ return -ENODEV;
+ if (!(ioaddr = ioremap(res->start, res->end - res->start)))
+ return -ENODEV;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -ENODEV;
+
+ if (!(dev = alloc_etherdev(sizeof (*tp))))
+ return -ENOMEM;
+
+ /* setup net dev */
+ dev->base_addr = (unsigned long)res->start;
+ dev->irq = irq;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ /* tulip private struct */
+ tp = netdev_priv(dev);
+ tp->dev = dev;
+ tp->base_addr = ioaddr;
+ tp->csr0 = 0;
+ tp->pldev = pdev;
+ tp->kdev = &pdev->dev;
+ tp->irq = irq;
+ tp->rx_ring = dma_alloc_coherent(&pdev->dev,
+ sizeof(struct tulip_rx_desc) * RX_RING_SIZE +
+ sizeof(struct tulip_tx_desc) * TX_RING_SIZE,
+ &tp->rx_ring_dma, GFP_KERNEL);
+ if (!tp->rx_ring)
+ return -ENODEV;
+ tp->tx_ring = (struct tulip_tx_desc *)(tp->rx_ring + RX_RING_SIZE);
+ tp->tx_ring_dma = tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * RX_RING_SIZE;
+
+ tp->chip_id = pdata->chip_id;
+ tp->flags = tulip_tbl[tp->chip_id].flags;
+
+ spin_lock_init(&tp->lock);
+ spin_lock_init(&tp->mii_lock);
+
+ init_timer(&tp->timer);
+ tp->timer.data = (unsigned long)dev;
+ tp->timer.function = tulip_tbl[tp->chip_id].media_timer;
+
+ INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task);
+
+ /* Stop the chip's Tx and Rx processes. */
+ tulip_stop_rxtx(tp);
+
+ /* Clear the missed-packet counter. */
+ ioread32(ioaddr + CSR8);
+
+ if (!is_valid_ether_addr(pdata->mac)) {
+ dev_info(&pdev->dev, "generating random ethernet MAC\n");
+ random_ether_addr(dev->dev_addr);
+ } else
+ memcpy(dev->dev_addr, pdata->mac, ETH_ALEN);
+
+ /* The Tulip-specific entries in the device structure. */
+ dev->netdev_ops = &tulip_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ netif_napi_add(dev, &tp->napi, tulip_poll, 16);
+ dev->ethtool_ops = &ops;
+
+ if (register_netdev(dev))
+ goto err_out_free_ring;
+
+ dev_info(&dev->dev,
+ "tulip_platform (%s) at MMIO %#lx %pM, IRQ %d\n",
+ tulip_tbl[tp->chip_id].chip_name,
+ (unsigned long)dev->base_addr, dev->dev_addr, irq);
+
+ platform_set_drvdata(pdev, dev);
+ return 0;
+
+err_out_free_ring:
+ dma_free_coherent(&pdev->dev,
+ sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
+ sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
+ tp->rx_ring, tp->rx_ring_dma);
+ return -ENODEV;
+}
+
+static int tulip_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata (pdev);
+ struct tulip_private *tp;
+
+ if (!dev)
+ return -ENODEV;
+
+ tp = netdev_priv(dev);
+ unregister_netdev(dev);
+ dma_free_coherent(&pdev->dev,
+ sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
+ sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
+ tp->rx_ring, tp->rx_ring_dma);
+ iounmap(tp->base_addr);
+ free_netdev(dev);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+#endif
+
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Polling 'interrupt' - used by things like netconsole to send skbs
@@ -2017,6 +2197,17 @@ static struct pci_driver tulip_pci_drive
};
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+static struct platform_driver tulip_platform_driver = {
+ .probe = tulip_probe,
+ .remove = tulip_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ },
+};
+#endif
+
static int __init tulip_init (void)
{
@@ -2033,6 +2224,9 @@ static int __init tulip_init (void)
#ifdef CONFIG_TULIP_PCI
ret = pci_register_driver(&tulip_pci_driver);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ ret = platform_driver_register(&tulip_platform_driver);
+#endif
return ret;
}
@@ -2042,6 +2236,9 @@ static void __exit tulip_cleanup (void)
#ifdef CONFIG_TULIP_PCI
pci_unregister_driver (&tulip_pci_driver);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ platform_driver_unregister (&tulip_platform_driver);
+#endif
}
--- a/drivers/net/ethernet/dec/tulip/tulip.h
+++ b/drivers/net/ethernet/dec/tulip/tulip.h
@@ -21,6 +21,8 @@
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/tulip.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
@@ -69,28 +71,6 @@ enum tbl_flag {
};
-/* chip types. careful! order is VERY IMPORTANT here, as these
- * are used throughout the driver as indices into arrays */
-/* Note 21142 == 21143. */
-enum chips {
- DC21040 = 0,
- DC21041 = 1,
- DC21140 = 2,
- DC21142 = 3, DC21143 = 3,
- LC82C168,
- MX98713,
- MX98715,
- MX98725,
- AX88140,
- PNIC2,
- COMET,
- COMPEX9881,
- I21145,
- DM910X,
- CONEXANT,
-};
-
-
enum MediaIs {
MediaIsFD = 1,
MediaAlwaysFD = 2,
@@ -446,7 +426,12 @@ struct tulip_private {
struct mediatable *mtable;
int cur_index; /* Current media index. */
int saved_if_port;
+#ifdef CONFIG_TULIP_PCI
struct pci_dev *pdev;
+#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ struct platform_device *pldev;
+#endif
struct device *kdev;
int irq;
int ttimer;
--- a/drivers/net/ethernet/dec/tulip/interrupt.c
+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
@@ -77,6 +77,10 @@ int tulip_refill_rx(struct net_device *d
mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ mapping = dma_map_single(&tp->pldev->dev, skb->data, PKT_BUF_SZ,
+ DMA_FROM_DEVICE);
+#endif
if (dma_mapping_error(tp->kdev, mapping)) {
dev_kfree_skb(skb);
tp->rx_buffers[entry].skb = NULL;
@@ -204,8 +208,7 @@ int tulip_poll(struct napi_struct *napi,
dev->stats.rx_fifo_errors++;
}
} else {
- struct sk_buff *skb;
-
+ struct sk_buff *skb;
/* Check if the packet is long enough to accept without copying
to a minimally-sized skbuff. */
if (pkt_len < tulip_rx_copybreak &&
@@ -248,6 +251,10 @@ int tulip_poll(struct napi_struct *napi,
pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ dma_unmap_single(&tp->pldev->dev, tp->rx_buffers[entry].mapping,
+ PKT_BUF_SZ, DMA_FROM_DEVICE);
+#endif
tp->rx_buffers[entry].skb = NULL;
tp->rx_buffers[entry].mapping = 0;
@@ -641,6 +648,11 @@ irqreturn_t tulip_interrupt(int irq, voi
tp->tx_buffers[entry].skb->len,
PCI_DMA_TODEVICE);
#endif
+#ifdef CONFIG_TULIP_PLATFORM
+ dma_unmap_single(&tp->pldev->dev, tp->tx_buffers[entry].mapping,
+ tp->tx_buffers[entry].skb->len,
+ DMA_TO_DEVICE);
+#endif
/* Free the original skb. */
dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
--- /dev/null
+++ b/include/linux/platform_data/tulip.h
@@ -0,0 +1,31 @@
+#ifndef _LINUX_TULIP_PDATA_H
+#define _LINUX_TULIP_PDATA_H
+
+/* chip types. careful! order is VERY IMPORTANT here, as these
+ * are used throughout the driver as indices into arrays */
+/* Note 21142 == 21143. */
+enum chips {
+ DC21040 = 0,
+ DC21041 = 1,
+ DC21140 = 2,
+ DC21142 = 3, DC21143 = 3,
+ LC82C168,
+ MX98713,
+ MX98715,
+ MX98725,
+ AX88140,
+ PNIC2,
+ COMET,
+ COMPEX9881,
+ I21145,
+ DM910X,
+ CONEXANT,
+ ADM8668,
+};
+
+struct tulip_platform_data {
+ u8 mac[6];
+ enum chips chip_id;
+};
+
+#endif
View Git Blame Copy Permalink