21817c8bd6
This adds support for the oxnas target in U-Boot 2014.04 History can be found at https://github.com/kref/u-boot-oxnas up to 2013.10 changes from 2013.10 to 2014.04 can be followed at https://gitorious.org/openwrt-oxnas Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43389
149 lines
5.0 KiB
C
149 lines
5.0 KiB
C
/*******************************************************************
|
|
*
|
|
* File: ddr_oxsemi.h
|
|
*
|
|
* Description: Declarations for DDR routines and data objects
|
|
*
|
|
* Author: Julien Margetts
|
|
*
|
|
* Copyright: Oxford Semiconductor Ltd, 2009
|
|
*/
|
|
|
|
void ddr_oxsemi_setup(int mhz);
|
|
|
|
/* define to refresh in bursts of 8 */
|
|
#define BURST_REFRESH_ENABLE
|
|
|
|
#define DDR_BASE 0x44700000
|
|
|
|
#define C_DDR_CFG_REG (DDR_BASE + 0x00)
|
|
#define C_CFG_DDR 0x80000000
|
|
#define C_CFG_SDR 0x00000000
|
|
#define C_CFG_WIDTH8 0x00200000
|
|
#define C_CFG_WIDTH16 0x00100000
|
|
#define C_CFG_WIDTH32 0x00000000
|
|
#define C_CFG_SIZE_FACTOR 0x00020000
|
|
#define C_CFG_REFRESH_ENABLE 0x00010000
|
|
#define C_CFG_BURST_REFRESH_ENABLE 0x01000000
|
|
#define C_CFG_SIZE(x) (x << 17)
|
|
#define CFG_SIZE_2MB 1
|
|
#define CFG_SIZE_4MB 2
|
|
#define CFG_SIZE_8MB 3
|
|
#define CFG_SIZE_16MB 4
|
|
#define CFG_SIZE_32MB 5
|
|
#define CFG_SIZE_64MB 6
|
|
#define CFG_SIZE_128MB 7
|
|
|
|
#define C_DDR_BLKEN_REG (DDR_BASE + 0x04)
|
|
#define C_BLKEN_DDR_ON 0x80000000
|
|
|
|
#define C_DDR_STAT_REG (DDR_BASE + 0x08)
|
|
|
|
#define C_DDR_CMD_REG (DDR_BASE + 0x0C)
|
|
#define C_CMD_SEND_COMMAND (1UL << 31) | (1 << 21) // RAS/CAS/WE/CS all low(active), CKE High, indicates
|
|
#define C_CMD_WAKE_UP 0x80FC0000 // Asserts CKE
|
|
#define C_CMD_MODE_SDR 0x80200022 // Sets CL=2 BL=4
|
|
#define C_CMD_MODE_DDR 0x80200063 // Sets CL=2.5 BL=8
|
|
#define C_CMD_RESET_DLL 0x00000100 // A8=1 Use in conjunction with C_CMD_MODE_DDR
|
|
#define C_CMD_PRECHARGE_ALL 0x80280400
|
|
#define C_CMD_AUTO_REFRESH 0x80240000
|
|
#define C_CMD_SELF_REFRESH 0x80040000 // As AUTO-REFRESH but with CKE low
|
|
#define C_CMD_NOP 0x803C0000 // NOP just to insert guaranteed delay
|
|
#define C_CMD_DDR2_EMR1 0x80210000 // Load extended mode register 1 with zeros (for init), CKE still set
|
|
//#define C_CMD_DDR2_EMR1 0x80210400 // Load extended mode register 1 with zeros (for init), CKE still set
|
|
#define C_CMD_ENABLE_DLL 0x00000000 // Values used in conjuction with C_CMD_DDR2_EMR1
|
|
#define C_CMD_DISABLE_DLL 0x00000001
|
|
#define C_CMD_REDUCED_DRIVE 0x00000002
|
|
#define C_CMD_ODT_DISABLED 0x00000000
|
|
#define C_CMD_ODT_50 0x00000044
|
|
#define C_CMD_ODT_75 0x00000004
|
|
#define C_CMD_ODT_150 0x00000040
|
|
#define C_CMD_MODE_DDR2_OCD_DFLT 0x00000380
|
|
#define C_CMD_MODE_DDR2_OCD_EXIT 0x00000000
|
|
|
|
#define C_CMD_DDR2_EMR2 0x80220000 // Load extended mode register 2 with zeros (for init), CKE still set
|
|
#define C_CMD_DDR2_EMR3 0x80230000 // Load extended mode register 3 with zeros (for init), CKE still set
|
|
|
|
#define C_DDR_AHB_REG (DDR_BASE + 0x10)
|
|
#define C_AHB_NO_RCACHES 0xFFFF0000
|
|
#define C_AHB_FLUSH_ALL_RCACHES 0x0000FFFF
|
|
#define C_AHB_FLUSH_AHB0_RCACHE 0x00000001
|
|
#define C_AHB_FLUSH_AHB1_RCACHE 0x00000002
|
|
|
|
#define C_DDR_DLL_REG (DDR_BASE + 0x14)
|
|
#define C_DLL_DISABLED 0x00000000
|
|
#define C_DLL_MANUAL 0x80000000
|
|
#define C_DLL_AUTO_OFFSET 0xA0000000
|
|
#define C_DLL_AUTO_IN_REFRESH 0xC0000000
|
|
#define C_DLL_AUTOMATIC 0xE0000000
|
|
|
|
#define C_DDR_MON_REG (DDR_BASE + 0x18)
|
|
#define C_MON_ALL 0x00000010
|
|
#define C_MON_CLIENT 0x00000000
|
|
|
|
#define C_DDR_DIAG_REG (DDR_BASE + 0x1C)
|
|
#define C_DDR_DIAG2_REG (DDR_BASE + 0x20)
|
|
|
|
#define C_DDR_IOC_REG (DDR_BASE + 0x24)
|
|
#define C_DDR_IOC_PWR_DWN (1 << 10)
|
|
#define C_DDR_IOC_SEL_SSTL (1 << 9)
|
|
#define C_DDR_IOC_CK_DRIVE(x) ((x) << 6)
|
|
#define C_DDR_IOC_DQ_DRIVE(x) ((x) << 3)
|
|
#define C_DDR_IOC_XX_DRIVE(x) ((x) << 0)
|
|
|
|
#define C_DDR_ARB_REG (DDR_BASE + 0x28)
|
|
#define C_DDR_ARB_MIDBUF (1 << 4)
|
|
#define C_DDR_ARB_LRUBANK (1 << 3)
|
|
#define C_DDR_ARB_REQAGE (1 << 2)
|
|
#define C_DDR_ARB_DATDIR (1 << 1)
|
|
#define C_DDR_ARB_DATDIR_NC (1 << 0)
|
|
|
|
#define C_TOP_ADDRESS_BIT_TEST 22
|
|
#define C_MEM_BASE C_SDRAM_BASE
|
|
|
|
#define C_MEM_TEST_BASE 0
|
|
#define C_MEM_TEST_LEN 1920
|
|
#define C_MAX_RAND_ACCESS_LEN 16
|
|
|
|
#define C_DDR_REG_IGNORE (DDR_BASE + 0x2C)
|
|
#define C_DDR_AHB4_REG (DDR_BASE + 0x44)
|
|
|
|
#define C_DDR_REG_TIMING0 (DDR_BASE + 0x34)
|
|
#define C_DDR_REG_TIMING1 (DDR_BASE + 0x38)
|
|
#define C_DDR_REG_TIMING2 (DDR_BASE + 0x3C)
|
|
|
|
#define C_DDR_REG_PHY0 (DDR_BASE + 0x48)
|
|
#define C_DDR_REG_PHY1 (DDR_BASE + 0x4C)
|
|
#define C_DDR_REG_PHY2 (DDR_BASE + 0x50)
|
|
#define C_DDR_REG_PHY3 (DDR_BASE + 0x54)
|
|
|
|
#define C_DDR_REG_GENERIC (DDR_BASE + 0x60)
|
|
|
|
#define C_OXSEMI_DDRC_SIGNATURE 0x054415AA
|
|
|
|
#define DDR_PHY_BASE (DDR_BASE + 0x80000)
|
|
#define DDR_PHY_TIMING (DDR_PHY_BASE + 0x48)
|
|
#define DDR_PHY_TIMING_CK (1 << 12)
|
|
#define DDR_PHY_TIMING_INC (1 << 13)
|
|
#define DDR_PHY_TIMING_W_CE (1 << 14)
|
|
#define DDR_PHY_TIMING_W_RST (1 << 15)
|
|
#define DDR_PHY_TIMING_I_CE (1 << 16)
|
|
#define DDR_PHY_TIMING_I_RST (1 << 17)
|
|
|
|
#define C_DDR_REG_PHY_TIMING (DDR_PHY_BASE + 0x50)
|
|
#define C_DDR_REG_PHY_WR_RATIO (DDR_PHY_BASE + 0x74)
|
|
#define C_DDR_REG_PHY_RD_RATIO (DDR_PHY_BASE + 0x78)
|
|
|
|
#define C_DDR_TRANSACTION_ROUTING (DDR_PHY_BASE + 0xC8)
|
|
#define DDR_ROUTE_CPU0_INSTR_SHIFT 0
|
|
#define DDR_ROUTE_CPU0_RDDATA_SHIFT 4
|
|
#define DDR_ROUTE_CPU0_WRDATA_SHIFT 6
|
|
#define DDR_ROUTE_CPU1_INSTR_SHIFT 8
|
|
#define DDR_ROUTE_CPU1_RDDATA_SHIFT 12
|
|
#define DDR_ROUTE_CPU1_WRDATA_SHIFT 14
|
|
|
|
unsigned int ddrc_signature(void);
|
|
void set_ddr_timing(unsigned int w, unsigned int i);
|
|
int pause(unsigned int us);
|
|
void set_ddr_sel(int val);
|