Openwrt-EcoNet/openwrt
1
0
Fork 0
Code Issues Pull Requests Actions Activity
main
openwrt/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
Keith Harrison 6707eba9f0 ramips: add support for D-Link DIR-2055 A1 
Add support for D-Link DIR-2055 A1 based on similarities to DIR-1960 A1,
as well as various DIR-8xx A1 models. Existing DIR-1960 A1 openwrt
"factory" firmware installs without modifications via the D-Link Recovery
GUI and has no known incompatibilities with the DIR-2055 A1.

Changes to be committed:
new file:   target/linux/ramips/dts/mt7621_dlink_dir-2055-a1.dts
modified:   target/linux/ramips/image/mt7621.mk
modified:   target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
modified:   target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh

Specifications:

    Board: Not known
    SoC: MediaTek MT7621 Family (MT7621AT)
    RAM: 256 MB (Micron 9OK17 D9PTK, should be DDR3 MT41K128M16JT-125)
    Flash: 128 MB (Winbond W29N01HVSINA)
    WiFi: MediaTek MT7615 Family (MT7615N x2)
    Switch: 1 WAN, 4 LAN (Gigabit)
    Ports: 1 USB 3.0 (front)
    Buttons: Reset, WiFi Toggle, WPS
    LEDs: Power (white/orange), Internet (white/orange),
          WiFi 2.4G (white), WiFi 5G (white)

Notes:

    Only known difference vs. the DIR-1960 A1 is that the DIR-2055 A1
    doesn't have a USB activity LED

Serial port:

    Tested to be identical to various DIR-8xx A1 models with a similar
    enclosure/pcb design:
        Parameters: 57600, 8N1, 3.3V TTL no flow control
        Location: J1 header (close to the Reset, WiFi and WPS buttons)
        Pinout: 1 - VCC 2 - RXD 3 - TXD 4 - GND
            Did not connect VCC when using

Installation:

    D-Link Recovery GUI: power down the router, press and hold the reset
    button, then re-plug it. Keep the reset button pressed until the power
    LED starts flashing orange, manually assign a static IP address under
    the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to
    http://192.168.0.1

    Some modern browsers may have problems flashing via the Recovery GUI,
    if that occurs consider uploading the firmware through cURL:

    curl -v -i -F "firmware=@file.bin" 192.168.0.1

Signed-off-by: Keith Harrison <keithh@protonmail.com>
2024-06-02 18:41:17 +02:00

273 lines
9.5 KiB
Plaintext
Raw Permalink Blame History

. /lib/functions/leds.sh
. /lib/functions/uci-defaults.sh
board=$(board_name)
board_config_update
case $board in
alfa-network,ax1800rm)
ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
ucidef_set_led_netdev "lan3" "lan3" "green:lan3" "lan3"
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan"
;;
asus,rp-ac87)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_rssimon "wlan1" "200000" "1"
ucidef_set_led_rssi "rssilow-wlan0" "RSSILOW" "green:rssilow-wlan0" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimedlow-wlan0" "RSSIMEDLOW" "green:rssimedlow-wlan0" "wlan0" "20" "100"
ucidef_set_led_rssi "rssimed-wlan0" "RSSIMED" "green:rssimed-wlan0" "wlan0" "40" "100"
ucidef_set_led_rssi "rssihigh-wlan0" "RSSIHIGH" "green:rssihigh-wlan0" "wlan0" "70" "100"
ucidef_set_led_rssi "rssilow-wlan1" "RSSILOW" "green:rssilow-wlan1" "wlan1" "1" "100"
ucidef_set_led_rssi "rssimedlow-wlan1" "RSSIMEDLOW" "green:rssimedlow-wlan1" "wlan1" "20" "100"
ucidef_set_led_rssi "rssimed-wlan1" "RSSIMED" "green:rssimed-wlan1" "wlan1" "40" "100"
ucidef_set_led_rssi "rssihigh-wlan1" "RSSIHIGH" "green:rssihigh-wlan1" "wlan1" "70" "100"
;;
asus,rt-ax53u)
ucidef_set_led_usbport "usb" "USB" "blue:usb" "usb1-port2"
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "mt76-phy0" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "mt76-phy1" "phy1tpt"
;;
asus,rt-ax54|\
yuncore,g720)
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "mt76-phy0" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "mt76-phy1" "phy1tpt"
;;
asus,rt-n56u-b1)
ucidef_set_led_netdev "lan" "LAN link" "blue:lan" "br-lan"
ucidef_set_led_netdev "wan" "WAN link" "blue:wan" "wan"
;;
beeline,smartbox-flash|\
beeline,smartbox-giga|\
beeline,smartbox-turbo|\
beeline,smartbox-turbo-plus|\
etisalat,s3|\
rostelecom,rt-sf-1)
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
;;
beeline,smartbox-pro|\
wifire,s1500-nbn)
ucidef_set_led_netdev "lan1" "lan1" "green:lan-1" "lan1" "link tx rx"
ucidef_set_led_netdev "lan2" "lan2" "green:lan-2" "lan2" "link tx rx"
ucidef_set_led_netdev "lan3" "lan3" "green:lan-3" "lan3" "link tx rx"
ucidef_set_led_netdev "lan4" "lan4" "green:lan-4" "lan4" "link tx rx"
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan" "link tx rx"
;;
belkin,rt1800)
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
;;
cudy,wr2100)
ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
ucidef_set_led_netdev "lan3" "lan3" "green:lan3" "lan3"
ucidef_set_led_netdev "lan4" "lan4" "green:lan4" "lan4"
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan"
;;
d-team,newifi-d2)
ucidef_set_led_netdev "internet" "internet" "amber:internet" "wan"
ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "blue:wlan2g" "wlan0"
ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "blue:wlan5g" "wlan1"
;;
d-team,pbr-m1|\
gehua,ghl-r-001|\
jcg,y2|\
xzwifi,creativebox-v1)
ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan"
;;
dlink,dap-1620-b1|\
dlink,dra-1360-a1)
ucidef_set_rssimon "wlan1" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan1" "1" "40"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "21" "100"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimed" "wlan1" "61" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "81" "100"
;;
dlink,dap-x1860-a1)
ucidef_set_rssimon "wlan1" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "orange:rssilow" "wlan1" "1" "25"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "26" "100"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimedium" "wlan1" "51" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "76" "100"
;;
dlink,dir-1960-a1|\
dlink,dir-2055-a1|\
dlink,dir-2150-a1|\
dlink,dir-2640-a1|\
dlink,dir-2660-a1)
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
;;
dlink,dir-3040-a1|\
dlink,dir-3060-a1)
ucidef_set_led_netdev "net_white" "WAN Link" "white:wan" "wan" "link"
ucidef_set_led_netdev "net_orange" "WAN Activity" "orange:wan" "wan" "tx rx"
;;
dlink,dir-853-a1|\
dlink,dir-853-a3)
ucidef_set_led_netdev "wan" "wan" "blue:net" "wan"
;;
dlink,dir-853-r1)
ucidef_set_led_netdev "internet" "internet" "blue:net" "wan"
;;
dlink,dir-1935-a1|\
dlink,dir-860l-b1|\
dlink,dir-867-a1|\
dlink,dir-878-a1|\
dlink,dir-882-a1|\
dlink,dir-882-r1)
ucidef_set_led_netdev "wan" "wan" "green:net" "wan"
;;
gnubee,gb-pc2)
ucidef_set_led_netdev "ethyellow" "ethyellow" "orange:ethyellow" "ethyellow" "link tx rx"
;;
huasifei,ws1208v2)
ucidef_set_led_netdev "wwan0" "wwan0" "green:cellular" "wwan0" "link tx rx"
;;
keenetic,kn-3010)
ucidef_set_led_netdev "internet" "internet" "green:internet" "wan"
;;
linksys,e5600)
ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link"
;;
linksys,ea6350-v4|\
linksys,ea7300-v1|\
linksys,ea7300-v2|\
linksys,ea7500-v2|\
linksys,ea8100-v1|\
linksys,ea8100-v2)
ucidef_set_led_netdev "lan1" "lan1 link" "green:lan1" "lan1" "link"
ucidef_set_led_netdev "lan2" "lan2 link" "green:lan2" "lan2" "link"
ucidef_set_led_netdev "lan3" "lan3 link" "green:lan3" "lan3" "link"
ucidef_set_led_netdev "lan4" "lan4 link" "green:lan4" "lan4" "link"
ucidef_set_led_netdev "wan" "wan link" "green:wan" "wan" "link"
;;
meig,slt866)
ucidef_set_led_netdev "lan" "eth" "blue:lanwan" "lan" "link tx rx"
ucidef_set_led_netdev "wwan0" "net" "blue:internet" "wwan0" "link tx rx"
;;
mikrotik,routerboard-760igs)
ucidef_set_led_netdev "sfp" "SFP" "blue:sfp" "sfp"
;;
mikrotik,ltap-2hnd|\
mikrotik,routerboard-m11g)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "green:rssi0" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssi1" "wlan0" "20" "100"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssi2" "wlan0" "40" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssi3" "wlan0" "60" "100"
ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "green:rssi4" "wlan0" "80" "100"
;;
mtc,wr1201)
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "br-lan"
;;
netgear,eax12)
ucidef_set_led_netdev "eth_act" "LAN act" "yellow:eth" "lan" "tx rx"
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth" "lan" "link"
;;
netgear,r6220|\
netgear,r6260|\
netgear,r6350|\
netgear,r6850|\
netgear,wac124|\
netgear,wndr3700-v5)
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan"
;;
netgear,r6700-v2|\
netgear,r6800|\
netgear,r6900-v2|\
netgear,r7200|\
netgear,r7450)
ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
ucidef_set_led_netdev "lan1" "LAN1" "white:lan1" "lan1"
ucidef_set_led_netdev "lan2" "LAN2" "white:lan2" "lan2"
ucidef_set_led_netdev "lan3" "LAN3" "white:lan3" "lan3"
ucidef_set_led_netdev "lan4" "LAN4" "white:lan4" "lan4"
;;
netgear,wax202)
ucidef_set_led_netdev "internet" "Internet" "green:net" "wan"
;;
oraybox,x3a)
ucidef_set_led_netdev "wan" "wan link" "red:status" "wan"
ucidef_set_led_netdev "lan" "lan link" "green:status" "br-lan"
;;
snr,snr-cpe-me1)
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
;;
tplink,archer-a6-v3|\
tplink,archer-ax23-v1|\
tplink,archer-c6-v3|\
tplink,archer-c6u-v1|\
tplink,ex220-v1)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
;;
tplink,deco-m4r-v4)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"
;;
tplink,ec330-g5u-v1)
ucidef_set_led_netdev "lan" "Ethernet" "blue:lan" "br-lan" "link tx rx"
ucidef_set_led_netdev "wan" "Internet" "blue:wan" "wan" "link tx rx"
ucidef_set_led_netdev "wan-off" "Internet-off" "amber:wan" "wan" "link"
;;
tplink,re350-v1)
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "blue:wifi2G" "wlan0"
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "blue:wifi5G" "wlan1"
ucidef_set_led_netdev "eth_act" "LAN act" "green:eth_act" "lan" "tx rx"
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "lan" "link"
;;
tplink,mr600-v2-eu)
ucidef_set_led_netdev "lan" "LAN" "white:lan" "br-lan"
ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
ucidef_set_led_netdev "4g" "4G" "white:4g" "wwan0"
;;
tplink,re500-v1|\
tplink,re650-v1|\
tplink,re650-v2)
ucidef_set_led_netdev "eth_act" "LAN act" "green:eth_act" "lan" "tx rx"
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "lan" "link"
;;
tplink,tl-wpa8631p-v3)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"
;;
xiaomi,mi-router-4a-gigabit-v2)
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link"
;;
xiaomi,mi-router-ac2100)
ucidef_set_led_netdev "wan-blue" "WAN (blue)" "blue:wan" "wan"
;;
xiaomi,mi-router-cr6606|\
xiaomi,mi-router-cr6608|\
xiaomi,mi-router-cr6609)
ucidef_set_led_netdev "internet" "Internet" "blue:net" "wan"
;;
xiaomi,redmi-router-ac2100)
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
;;
youhua,wr1200js)
ucidef_set_led_netdev "internet" "INTERNET" "green:wan" "wan"
;;
yuncore,fap690)
ucidef_set_led_netdev "eth_link" "LAN link" "blue:status" "lan" "link"
;;
yuncore,ax820)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "lan"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
;;
z-router,zr-2660)
ucidef_set_led_netdev "lan" "lan" "green:lan" "br-lan" "link tx rx"
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan" "link tx rx"
ucidef_set_led_netdev "wan-off" "wan-off" "red:wan" "wan" "link"
;;
zyxel,lte3301-plus)
ucidef_set_led_netdev "internet" "internet" "white:internet" "wwan0"
;;
zyxel,lte5398-m904)
ucidef_set_led_netdev "internet" "LTE/3G Internet Activity" "green:internet" "wwan0" "rx tx"
;;
esac
board_config_flush
exit 0
Reference in New Issue View Git Blame Copy Permalink