f2f428c699
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: 128 MB SPI-NAND
RAM: 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, Mesh
Power: DC 12V 1A
Gain telnet access:
1. Login into web interface, and download the configuration.
2. Decode and uncompress the configuration:
* Enter fakeroot if you are not login as root.
base64 -d e-xxxxxxxxxxxx-cfg.tar.gz | tar -zx
3. Edit 'etc/passwd', remove root password: 'root::1:0:99999:7:::'.
4. Edit 'etc/rc.local', insert telnetd command before 'exit 0':
( sleep 3s; /usr/sbin/telnetd; ) &
5. Repack the configuration:
tar -zc etc/ | base64 > e-xxxxxxxxxxxx-cfg.tar.gz
6. Upload new configuration via web interface, now you can connect to
ASR3000 via telnet.
Flash instructions:
1. Connect to ASR3000, backup everything, especially 'Factory' part.
2. Write new BL2:
mtd write openwrt-mediatek-filogic-abt_asr3000-preloader.bin BL2
3. Write new FIP:
mtd write openwrt-mediatek-filogic-abt_asr3000-bl31-uboot.fip FIP
4. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/15887
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
133 lines
6.0 KiB
Plaintext
133 lines
6.0 KiB
Plaintext
. /lib/functions/leds.sh
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
board=$(board_name)
|
|
|
|
board_config_update
|
|
|
|
case $board in
|
|
abt,asr3000)
|
|
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
|
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan-2ghz" "phy0-ap0"
|
|
ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wlan-5ghz" "phy1-ap0"
|
|
;;
|
|
confiabits,mt7981)
|
|
ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1" "link tx rx"
|
|
ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2" "link tx rx"
|
|
ucidef_set_led_netdev "lan3" "lan3" "blue:lan-3" "lan3" "link tx rx"
|
|
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
|
|
;;
|
|
bananapi,bpi-r3-mini)
|
|
ucidef_set_led_netdev "lan1" "LAN" "mdio-bus:0e:green:lan" "eth0" "link_2500 link_1000 tx rx"
|
|
ucidef_set_led_netdev "lan2" "LAN" "mdio-bus:0e:yellow:lan" "eth0" "link_2500 link_100 tx rx"
|
|
ucidef_set_led_netdev "wan1" "WAN" "mdio-bus:0f:green:wan" "eth1" "link_2500 link_1000 tx rx"
|
|
ucidef_set_led_netdev "wan2" "WAN" "mdio-bus:0f:yellow:wan" "eth1" "link_2500 link_100 tx rx"
|
|
ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan-1" "phy0-ap0"
|
|
ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan-2" "phy1-ap0"
|
|
;;
|
|
bananapi,bpi-r4|\
|
|
bananapi,bpi-r4-poe)
|
|
ucidef_set_led_netdev "wan" "wan" "mt7530-0:00:green:lan" "wan" "link tx rx"
|
|
ucidef_set_led_netdev "lan1" "lan1" "mt7530-0:01:green:lan" "lan1" "link tx rx"
|
|
ucidef_set_led_netdev "lan2" "lan2" "mt7530-0:02:green:lan" "lan2" "link tx rx"
|
|
ucidef_set_led_netdev "lan3" "lan3" "mt7530-0:03:green:lan" "lan3" "link tx rx"
|
|
;;
|
|
cudy,re3000-v1)
|
|
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" "link tx rx"
|
|
;;
|
|
cudy,wr3000-v1)
|
|
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
|
|
;;
|
|
glinet,gl-x3000|\
|
|
glinet,gl-xe3000)
|
|
ucidef_set_led_default "power" "POWER" "green:power" "1"
|
|
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
|
|
ucidef_set_led_netdev "5g_1" "5G_1" "green:5g:led1" "wwan0"
|
|
ucidef_set_led_netdev "5g_2" "5G_2" "green:5g:led2" "wwan0"
|
|
ucidef_set_led_netdev "5g_3" "5G_3" "green:5g:led3" "wwan0"
|
|
ucidef_set_led_netdev "5g_4" "5G_4" "green:5g:led4" "wwan0"
|
|
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wifi2g" "phy0-ap0"
|
|
ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wifi5g" "phy1-ap0"
|
|
;;
|
|
mercusys,mr90x-v1)
|
|
ucidef_set_led_netdev "lan-0" "lan-0" "green:lan-0" "lan0" "link tx rx"
|
|
ucidef_set_led_netdev "lan-1" "lan-1" "green:lan-1" "lan1" "link tx rx"
|
|
ucidef_set_led_netdev "lan-2" "lan-2" "green:lan-2" "lan2" "link tx rx"
|
|
ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
|
|
;;
|
|
netgear,wax220)
|
|
ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
|
|
ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
|
|
ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
|
|
;;
|
|
nokia,ea0326gmp)
|
|
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" "link"
|
|
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan" "link"
|
|
ucidef_set_led_netdev "wlan" "WLAN" "green:wlan" "phy1-ap0" "link"
|
|
;;
|
|
openembed,som7981)
|
|
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
|
|
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
|
|
;;
|
|
openwrt,one)
|
|
ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:0f:green:wan" "eth0" "rx tx"
|
|
ucidef_set_led_netdev "wanlink" "WANLINK" "mdio-bus:0f:amber:wan" "eth0" "link"
|
|
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
|
|
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
|
|
;;
|
|
routerich,ax3000)
|
|
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
|
|
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
|
|
ucidef_set_led_netdev "lan-3" "lan-3" "blue:lan-3" "lan3" "link tx rx"
|
|
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
|
|
ucidef_set_led_netdev "wan-off" "wan-off" "red:wan" "wan" "link"
|
|
;;
|
|
smartrg,sdg-8733|\
|
|
smartrg,sdg-8734)
|
|
ucidef_set_led_netdev "lan-1-green" "LAN1" "mdio-bus:08:green:lan" "lan1" "link_2500 link_5000"
|
|
ucidef_set_led_netdev "lan-1-orange" "LAN1" "mdio-bus:08:orange:lan" "lan1" "link_100 link_1000"
|
|
ucidef_set_led_netdev "lan-1-white" "LAN1" "mdio-bus:08:white:lan" "lan1" "link_10000"
|
|
ucidef_set_led_netdev "lan-2-green" "LAN2" "mt7530-0:01:green:lan" "lan2" "link_1000"
|
|
ucidef_set_led_netdev "lan-2-amber" "LAN2" "mt7530-0:01:amber:lan" "lan2" "link_100 link_10"
|
|
ucidef_set_led_netdev "lan-3-green" "LAN3" "mt7530-0:02:green:lan" "lan3" "link_1000"
|
|
ucidef_set_led_netdev "lan-3-amber" "LAN3" "mt7530-0:02:amber:lan" "lan3" "link_100 link_10"
|
|
ucidef_set_led_netdev "lan-4-green" "LAN4" "mt7530-0:03:green:lan" "lan4" "link_1000"
|
|
ucidef_set_led_netdev "lan-4-amber" "LAN4" "mt7530-0:03:amber:lan" "lan4" "link_100 link_10"
|
|
ucidef_set_led_netdev "wan-green" "WAN" "mdio-bus:00:green:wan" "wan" "link_2500 link_5000"
|
|
ucidef_set_led_netdev "wan-orange" "WAN" "mdio-bus:00:orange:wan" "wan" "link_100 link_1000"
|
|
ucidef_set_led_netdev "wan-white" "WAN" "mdio-bus:00:white:wan" "wan" "link_10000"
|
|
;;
|
|
wavlink,wl-wn586x3)
|
|
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
|
|
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
|
|
ucidef_set_led_netdev "wan" "wan" "blue:wan" "eth1" "link tx rx"
|
|
;;
|
|
tplink,re6000xd)
|
|
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-0" "lan1" "link tx rx"
|
|
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-1" "lan2" "link tx rx"
|
|
ucidef_set_led_netdev "eth1" "lan-3" "blue:lan-2" "eth1" "link tx rx"
|
|
;;
|
|
xiaomi,mi-router-wr30u-stock|\
|
|
xiaomi,mi-router-wr30u-ubootmod)
|
|
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
|
|
;;
|
|
xiaomi,redmi-router-ax6000-stock|\
|
|
xiaomi,redmi-router-ax6000-ubootmod)
|
|
ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan"
|
|
;;
|
|
zbtlink,zbt-z8103ax)
|
|
ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
|
|
;;
|
|
zyxel_ex5601-t0-stock|\
|
|
zyxel,ex5601-t0-ubootmod)
|
|
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link tx rx"
|
|
ucidef_set_led_netdev "wan" "WAN" "green:inet" "eth1" "link tx rx"
|
|
ucidef_set_led_netdev "wifi-24g" "WIFI-2.4G" "green:wifi24g" "phy0-ap0" "link tx rx"
|
|
ucidef_set_led_netdev "wifi-5g" "WIFI-5G" "green:wifi5g" "phy1-ap0" "link tx rx"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|