Openwrt-EcoNet/openwrt
1
0
Fork 0
Code Issues Pull Requests Actions Activity
main
openwrt/target/linux/generic/backport-6.1/883-v6.4-mfd-axp20x-Add-support-for-AXP15060-PMIC.patch
Chukun Pan 85b156c113 generic: 6.1: backport AXP PMIC support 
Backport AXP15060, AXP313a and AXP192 support.
The AXP15060 PMIC is used for starfive boards,
and the AXP313a PMIC is used for sunxi boards.
Remove conflicting patches from starfive target.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2024-03-26 21:56:57 +01:00

344 lines
11 KiB
Diff
Raw Permalink Blame History

From e0f8ad2a705367518b5c56bf9d6da89681467c02 Mon Sep 17 00:00:00 2001
From: Shengyu Qu <wiagn233@outlook.com>
Date: Fri, 21 Apr 2023 23:08:15 +0800
Subject: [PATCH] mfd: axp20x: Add support for AXP15060 PMIC
The AXP15060 is a PMIC chip produced by X-Powers, and could be connected
via an I2C bus.
Describe the regmap and the MFD bits, along with the registers exposed
via I2C. Eventually advertise the device using a new compatible string
and add support for power off the system.
The driver would disable PEK function if IRQ is not configured in device
tree, since some boards (For example, Starfive Visionfive 2) didn't
connect IRQ line of PMIC to SOC.
GPIO function isn't enabled in this commit, since its configuration
operation is different from any existing AXP PMICs and needs
logic modification on existing driver. GPIO support might come in later
patches.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/TY3P286MB261162D57695AC8164ED50E298609@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM
---
drivers/mfd/axp20x-i2c.c | 2 +
drivers/mfd/axp20x.c | 107 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/axp20x.h | 85 +++++++++++++++++++++++++++++
3 files changed, 194 insertions(+)
--- a/drivers/mfd/axp20x-i2c.c
+++ b/drivers/mfd/axp20x-i2c.c
@@ -66,6 +66,7 @@ static const struct of_device_id axp20x_
{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
+ { .compatible = "x-powers,axp15060", .data = (void *)AXP15060_ID },
{ },
};
MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match);
@@ -79,6 +80,7 @@ static const struct i2c_device_id axp20x
{ "axp223", 0 },
{ "axp803", 0 },
{ "axp806", 0 },
+ { "axp15060", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -43,6 +43,7 @@ static const char * const axp20x_model_n
"AXP806",
"AXP809",
"AXP813",
+ "AXP15060",
};
static const struct regmap_range axp152_writeable_ranges[] = {
@@ -169,6 +170,31 @@ static const struct regmap_access_table
.n_yes_ranges = ARRAY_SIZE(axp806_volatile_ranges),
};
+static const struct regmap_range axp15060_writeable_ranges[] = {
+ regmap_reg_range(AXP15060_PWR_OUT_CTRL1, AXP15060_DCDC_MODE_CTRL2),
+ regmap_reg_range(AXP15060_OUTPUT_MONITOR_DISCHARGE, AXP15060_CPUSLDO_V_CTRL),
+ regmap_reg_range(AXP15060_PWR_WAKEUP_CTRL, AXP15060_PWR_DISABLE_DOWN_SEQ),
+ regmap_reg_range(AXP15060_PEK_KEY, AXP15060_PEK_KEY),
+ regmap_reg_range(AXP15060_IRQ1_EN, AXP15060_IRQ2_EN),
+ regmap_reg_range(AXP15060_IRQ1_STATE, AXP15060_IRQ2_STATE),
+};
+
+static const struct regmap_range axp15060_volatile_ranges[] = {
+ regmap_reg_range(AXP15060_STARTUP_SRC, AXP15060_STARTUP_SRC),
+ regmap_reg_range(AXP15060_PWR_WAKEUP_CTRL, AXP15060_PWR_DISABLE_DOWN_SEQ),
+ regmap_reg_range(AXP15060_IRQ1_STATE, AXP15060_IRQ2_STATE),
+};
+
+static const struct regmap_access_table axp15060_writeable_table = {
+ .yes_ranges = axp15060_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp15060_writeable_ranges),
+};
+
+static const struct regmap_access_table axp15060_volatile_table = {
+ .yes_ranges = axp15060_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp15060_volatile_ranges),
+};
+
static const struct resource axp152_pek_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
@@ -237,6 +263,11 @@ static const struct resource axp809_pek_
DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
};
+static const struct resource axp15060_pek_resources[] = {
+ DEFINE_RES_IRQ_NAMED(AXP15060_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
+ DEFINE_RES_IRQ_NAMED(AXP15060_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
+};
+
static const struct regmap_config axp152_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -282,6 +313,15 @@ static const struct regmap_config axp806
.cache_type = REGCACHE_RBTREE,
};
+static const struct regmap_config axp15060_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp15060_writeable_table,
+ .volatile_table = &axp15060_volatile_table,
+ .max_register = AXP15060_IRQ2_STATE,
+ .cache_type = REGCACHE_RBTREE,
+};
+
#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \
[_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
@@ -503,6 +543,23 @@ static const struct regmap_irq axp809_re
INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT, 4, 0),
};
+static const struct regmap_irq axp15060_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP15060, DIE_TEMP_HIGH_LV1, 0, 0),
+ INIT_REGMAP_IRQ(AXP15060, DIE_TEMP_HIGH_LV2, 0, 1),
+ INIT_REGMAP_IRQ(AXP15060, DCDC1_V_LOW, 0, 2),
+ INIT_REGMAP_IRQ(AXP15060, DCDC2_V_LOW, 0, 3),
+ INIT_REGMAP_IRQ(AXP15060, DCDC3_V_LOW, 0, 4),
+ INIT_REGMAP_IRQ(AXP15060, DCDC4_V_LOW, 0, 5),
+ INIT_REGMAP_IRQ(AXP15060, DCDC5_V_LOW, 0, 6),
+ INIT_REGMAP_IRQ(AXP15060, DCDC6_V_LOW, 0, 7),
+ INIT_REGMAP_IRQ(AXP15060, PEK_LONG, 1, 0),
+ INIT_REGMAP_IRQ(AXP15060, PEK_SHORT, 1, 1),
+ INIT_REGMAP_IRQ(AXP15060, GPIO1_INPUT, 1, 2),
+ INIT_REGMAP_IRQ(AXP15060, PEK_FAL_EDGE, 1, 3),
+ INIT_REGMAP_IRQ(AXP15060, PEK_RIS_EDGE, 1, 4),
+ INIT_REGMAP_IRQ(AXP15060, GPIO2_INPUT, 1, 5),
+};
+
static const struct regmap_irq_chip axp152_regmap_irq_chip = {
.name = "axp152_irq_chip",
.status_base = AXP152_IRQ1_STATE,
@@ -589,6 +646,17 @@ static const struct regmap_irq_chip axp8
.num_regs = 5,
};
+static const struct regmap_irq_chip axp15060_regmap_irq_chip = {
+ .name = "axp15060",
+ .status_base = AXP15060_IRQ1_STATE,
+ .ack_base = AXP15060_IRQ1_STATE,
+ .unmask_base = AXP15060_IRQ1_EN,
+ .init_ack_masked = true,
+ .irqs = axp15060_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp15060_regmap_irqs),
+ .num_regs = 2,
+};
+
static const struct mfd_cell axp20x_cells[] = {
{
.name = "axp20x-gpio",
@@ -833,6 +901,23 @@ static const struct mfd_cell axp813_cell
},
};
+static const struct mfd_cell axp15060_cells[] = {
+ {
+ .name = "axp221-pek",
+ .num_resources = ARRAY_SIZE(axp15060_pek_resources),
+ .resources = axp15060_pek_resources,
+ }, {
+ .name = "axp20x-regulator",
+ },
+};
+
+/* For boards that don't have IRQ line connected to SOC. */
+static const struct mfd_cell axp_regulator_only_cells[] = {
+ {
+ .name = "axp20x-regulator",
+ },
+};
+
static int axp20x_power_off(struct sys_off_data *data)
{
struct axp20x_dev *axp20x = data->cb_data;
@@ -942,6 +1027,28 @@ int axp20x_match_device(struct axp20x_de
*/
axp20x->regmap_irq_chip = &axp803_regmap_irq_chip;
break;
+ case AXP15060_ID:
+ /*
+ * Don't register the power key part if there is no interrupt
+ * line.
+ *
+ * Since most use cases of AXP PMICs are Allwinner SOCs, board
+ * designers follow Allwinner's reference design and connects
+ * IRQ line to SOC, there's no need for those variants to deal
+ * with cases that IRQ isn't connected. However, AXP15660 is
+ * used by some other vendors' SOCs that didn't connect IRQ
+ * line, we need to deal with this case.
+ */
+ if (axp20x->irq > 0) {
+ axp20x->nr_cells = ARRAY_SIZE(axp15060_cells);
+ axp20x->cells = axp15060_cells;
+ } else {
+ axp20x->nr_cells = ARRAY_SIZE(axp_regulator_only_cells);
+ axp20x->cells = axp_regulator_only_cells;
+ }
+ axp20x->regmap_cfg = &axp15060_regmap_config;
+ axp20x->regmap_irq_chip = &axp15060_regmap_irq_chip;
+ break;
default:
dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
return -EINVAL;
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -21,6 +21,7 @@ enum axp20x_variants {
AXP806_ID,
AXP809_ID,
AXP813_ID,
+ AXP15060_ID,
NR_AXP20X_VARIANTS,
};
@@ -131,6 +132,39 @@ enum axp20x_variants {
/* Other DCDC regulator control registers are the same as AXP803 */
#define AXP813_DCDC7_V_OUT 0x26
+#define AXP15060_STARTUP_SRC 0x00
+#define AXP15060_PWR_OUT_CTRL1 0x10
+#define AXP15060_PWR_OUT_CTRL2 0x11
+#define AXP15060_PWR_OUT_CTRL3 0x12
+#define AXP15060_DCDC1_V_CTRL 0x13
+#define AXP15060_DCDC2_V_CTRL 0x14
+#define AXP15060_DCDC3_V_CTRL 0x15
+#define AXP15060_DCDC4_V_CTRL 0x16
+#define AXP15060_DCDC5_V_CTRL 0x17
+#define AXP15060_DCDC6_V_CTRL 0x18
+#define AXP15060_ALDO1_V_CTRL 0x19
+#define AXP15060_DCDC_MODE_CTRL1 0x1a
+#define AXP15060_DCDC_MODE_CTRL2 0x1b
+#define AXP15060_OUTPUT_MONITOR_DISCHARGE 0x1e
+#define AXP15060_IRQ_PWROK_VOFF 0x1f
+#define AXP15060_ALDO2_V_CTRL 0x20
+#define AXP15060_ALDO3_V_CTRL 0x21
+#define AXP15060_ALDO4_V_CTRL 0x22
+#define AXP15060_ALDO5_V_CTRL 0x23
+#define AXP15060_BLDO1_V_CTRL 0x24
+#define AXP15060_BLDO2_V_CTRL 0x25
+#define AXP15060_BLDO3_V_CTRL 0x26
+#define AXP15060_BLDO4_V_CTRL 0x27
+#define AXP15060_BLDO5_V_CTRL 0x28
+#define AXP15060_CLDO1_V_CTRL 0x29
+#define AXP15060_CLDO2_V_CTRL 0x2a
+#define AXP15060_CLDO3_V_CTRL 0x2b
+#define AXP15060_CLDO4_V_CTRL 0x2d
+#define AXP15060_CPUSLDO_V_CTRL 0x2e
+#define AXP15060_PWR_WAKEUP_CTRL 0x31
+#define AXP15060_PWR_DISABLE_DOWN_SEQ 0x32
+#define AXP15060_PEK_KEY 0x36
+
/* Interrupt */
#define AXP152_IRQ1_EN 0x40
#define AXP152_IRQ2_EN 0x41
@@ -152,6 +186,11 @@ enum axp20x_variants {
#define AXP20X_IRQ5_STATE 0x4c
#define AXP20X_IRQ6_STATE 0x4d
+#define AXP15060_IRQ1_EN 0x40
+#define AXP15060_IRQ2_EN 0x41
+#define AXP15060_IRQ1_STATE 0x48
+#define AXP15060_IRQ2_STATE 0x49
+
/* ADC */
#define AXP20X_ACIN_V_ADC_H 0x56
#define AXP20X_ACIN_V_ADC_L 0x57
@@ -222,6 +261,8 @@ enum axp20x_variants {
#define AXP22X_GPIO_STATE 0x94
#define AXP22X_GPIO_PULL_DOWN 0x95
+#define AXP15060_CLDO4_GPIO2_MODESET 0x2c
+
/* Battery */
#define AXP20X_CHRG_CC_31_24 0xb0
#define AXP20X_CHRG_CC_23_16 0xb1
@@ -419,6 +460,33 @@ enum {
AXP813_REG_ID_MAX,
};
+enum {
+ AXP15060_DCDC1 = 0,
+ AXP15060_DCDC2,
+ AXP15060_DCDC3,
+ AXP15060_DCDC4,
+ AXP15060_DCDC5,
+ AXP15060_DCDC6,
+ AXP15060_ALDO1,
+ AXP15060_ALDO2,
+ AXP15060_ALDO3,
+ AXP15060_ALDO4,
+ AXP15060_ALDO5,
+ AXP15060_BLDO1,
+ AXP15060_BLDO2,
+ AXP15060_BLDO3,
+ AXP15060_BLDO4,
+ AXP15060_BLDO5,
+ AXP15060_CLDO1,
+ AXP15060_CLDO2,
+ AXP15060_CLDO3,
+ AXP15060_CLDO4,
+ AXP15060_CPUSLDO,
+ AXP15060_SW,
+ AXP15060_RTC_LDO,
+ AXP15060_REG_ID_MAX,
+};
+
/* IRQs */
enum {
AXP152_IRQ_LDO0IN_CONNECT = 1,
@@ -637,6 +705,23 @@ enum axp809_irqs {
AXP809_IRQ_GPIO0_INPUT,
};
+enum axp15060_irqs {
+ AXP15060_IRQ_DIE_TEMP_HIGH_LV1 = 1,
+ AXP15060_IRQ_DIE_TEMP_HIGH_LV2,
+ AXP15060_IRQ_DCDC1_V_LOW,
+ AXP15060_IRQ_DCDC2_V_LOW,
+ AXP15060_IRQ_DCDC3_V_LOW,
+ AXP15060_IRQ_DCDC4_V_LOW,
+ AXP15060_IRQ_DCDC5_V_LOW,
+ AXP15060_IRQ_DCDC6_V_LOW,
+ AXP15060_IRQ_PEK_LONG,
+ AXP15060_IRQ_PEK_SHORT,
+ AXP15060_IRQ_GPIO1_INPUT,
+ AXP15060_IRQ_PEK_FAL_EDGE,
+ AXP15060_IRQ_PEK_RIS_EDGE,
+ AXP15060_IRQ_GPIO2_INPUT,
+};
+
struct axp20x_dev {
struct device *dev;
int irq;
Reference in New Issue View Git Blame Copy Permalink