243 lines
5.6 KiB
Diff
243 lines
5.6 KiB
Diff
From b1ba87897ceda8e49a47aa92832dd7bff8583e21 Mon Sep 17 00:00:00 2001
|
|
From: Linus Walleij <linus.walleij@linaro.org>
|
|
Date: Mon, 7 Nov 2022 14:41:04 +0100
|
|
Subject: [PATCH] ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L
|
|
|
|
This adds a device tree for the D-Link DIR-890L. This device
|
|
is very similar to D-Link DIR-885L, the differences are detailed
|
|
as a comment in the DTS file.
|
|
|
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org
|
|
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 211 ++++++++++++++++++
|
|
2 files changed, 212 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
|
bcm4709-tplink-archer-c9-v1.dtb \
|
|
bcm47094-asus-rt-ac88u.dtb \
|
|
bcm47094-dlink-dir-885l.dtb \
|
|
+ bcm47094-dlink-dir-890l.dtb \
|
|
bcm47094-linksys-panamera.dtb \
|
|
bcm47094-luxul-abr-4500.dtb \
|
|
bcm47094-luxul-xap-1610.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
|
|
@@ -0,0 +1,211 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+/*
|
|
+ * Device tree for D-Link DIR-890L
|
|
+ * D-Link calls this board "WRGAC36"
|
|
+ * this router has the same looks and form factor as D-Link DIR-885L.
|
|
+ *
|
|
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
|
|
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
|
|
+ * router/extender switch is mounted (there is an empty mount point on the
|
|
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
|
|
+ * order.
|
|
+ *
|
|
+ * Based on the device tree for DIR-885L
|
|
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
|
|
+ * Copyright (C) 2022 Linus Walleij
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "bcm47094.dtsi"
|
|
+#include "bcm5301x-nand-cs0-bch1.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
|
|
+ model = "D-Link DIR-890L";
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "console=ttyS0,115200 earlycon";
|
|
+ };
|
|
+
|
|
+ memory@0 {
|
|
+ device_type = "memory";
|
|
+ reg = <0x00000000 0x08000000>,
|
|
+ <0x88000000 0x08000000>;
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ /*
|
|
+ * LED information is derived from the boot log which
|
|
+ * conveniently lists all the LEDs.
|
|
+ */
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ power-white {
|
|
+ label = "bcm53xx:white:power";
|
|
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "default-on";
|
|
+ };
|
|
+
|
|
+ wan-white {
|
|
+ label = "bcm53xx:white:wan";
|
|
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ power-amber {
|
|
+ label = "bcm53xx:amber:power";
|
|
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ wan-amber {
|
|
+ label = "bcm53xx:amber:wan";
|
|
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ usb3-white {
|
|
+ label = "bcm53xx:white:usb3";
|
|
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
|
|
+ trigger-sources = <&xhci_port1>;
|
|
+ linux,default-trigger = "usbport";
|
|
+ };
|
|
+
|
|
+ usb2-white {
|
|
+ label = "bcm53xx:white:usb2";
|
|
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
|
|
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
|
|
+ linux,default-trigger = "usbport";
|
|
+ };
|
|
+
|
|
+ 2ghz {
|
|
+ label = "bcm53xx:white:2ghz";
|
|
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ 5ghz {
|
|
+ label = "bcm53xx:white:5ghz";
|
|
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio-keys {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ button-wps {
|
|
+ label = "WPS";
|
|
+ linux,code = <KEY_WPS_BUTTON>;
|
|
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ /* Called "factory reset" in the vendor dmesg */
|
|
+ button-restart {
|
|
+ label = "Reset";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /*
|
|
+ * The flash memory is memory mapped at 0x1e000000-0x1fffffff
|
|
+ * 64KB blocks; total size 2MB, same that can be
|
|
+ * found attached to the spi_nor SPI controller.
|
|
+ */
|
|
+ nvram@1e1f0000 {
|
|
+ compatible = "brcm,nvram";
|
|
+ reg = <0x1e1f0000 0x00010000>;
|
|
+
|
|
+ et0macaddr: et0macaddr {
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&gmac2 {
|
|
+ /*
|
|
+ * The NVRAM curiously does not contain a MAC address
|
|
+ * for et2 so since that is the only ethernet interface
|
|
+ * actually in use on the platform, we use this et0 MAC
|
|
+ * address for et2.
|
|
+ */
|
|
+ nvmem-cells = <&et0macaddr>;
|
|
+ nvmem-cell-names = "mac-address";
|
|
+};
|
|
+
|
|
+&spi_nor {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&nandcs {
|
|
+ /* Spansion S34ML01G2, 128MB with 128KB erase blocks */
|
|
+ partitions {
|
|
+ compatible = "fixed-partitions";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ /*
|
|
+ * This is called "nflash" in the vendor kernel with
|
|
+ * "upgrade" and "rootfs" (probably using OpenWrt
|
|
+ * splitpart). We call it "firmware" like standard tools
|
|
+ * assume. The CFE loader contains incorrect information
|
|
+ * about TRX partitions, ignore this, there are no TRX
|
|
+ * partitions: this device uses SEAMA.
|
|
+ */
|
|
+ firmware@0 {
|
|
+ label = "firmware";
|
|
+ reg = <0x00000000 0x08000000>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&usb2 {
|
|
+ vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
|
|
+};
|
|
+
|
|
+&usb3 {
|
|
+ vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
|
|
+};
|
|
+
|
|
+&usb3_phy {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&srab {
|
|
+ status = "okay";
|
|
+
|
|
+ ports {
|
|
+ port@0 {
|
|
+ reg = <0>;
|
|
+ label = "lan1";
|
|
+ };
|
|
+
|
|
+ port@1 {
|
|
+ reg = <1>;
|
|
+ label = "lan2";
|
|
+ };
|
|
+
|
|
+ port@2 {
|
|
+ reg = <2>;
|
|
+ label = "lan3";
|
|
+ };
|
|
+
|
|
+ port@3 {
|
|
+ reg = <3>;
|
|
+ label = "lan4";
|
|
+ };
|
|
+
|
|
+ port@4 {
|
|
+ reg = <4>;
|
|
+ label = "wan";
|
|
+ };
|
|
+
|
|
+ port@8 {
|
|
+ reg = <8>;
|
|
+ label = "cpu";
|
|
+ ethernet = <&gmac2>;
|
|
+ phy-mode = "rgmii";
|
|
+
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|