d41d9befb9
Add u-boot bootloader based on 2023.01 to support D1-based boards, currently: - Dongshan Nezha STU - LicheePi RV Dock - MangoPi MQ-Pro - Nezha D1 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
34 lines
1.2 KiB
Diff
34 lines
1.2 KiB
Diff
From 79f7d883d980beea9989d06f9fba4fcc0430176a Mon Sep 17 00:00:00 2001
|
|
From: Samuel Holland <samuel@sholland.org>
|
|
Date: Thu, 14 Jul 2022 22:14:38 -0500
|
|
Subject: [PATCH 34/90] phy: sun4i-usb: Do not drive VBUS with external VBUS
|
|
present
|
|
|
|
It is possible to use host-side USB with externally-provided VBUS. For
|
|
example, some USB OTG cables have an extra power input which powers
|
|
both the board and the USB peripheral.
|
|
|
|
To support this setup, skip enabling the VBUS switch/regulator if VBUS
|
|
voltage is already present. This behavior matches the Linux PHY driver.
|
|
|
|
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
---
|
|
drivers/phy/allwinner/phy-sun4i-usb.c | 6 ++++++
|
|
1 file changed, 6 insertions(+)
|
|
|
|
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
|
|
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
|
|
@@ -220,6 +220,12 @@ static int sun4i_usb_phy_power_on(struct
|
|
initial_usb_scan_delay = 0;
|
|
}
|
|
|
|
+ /* For phy0 only turn on Vbus if we don't have an ext. Vbus */
|
|
+ if (phy->id == 0 && sun4i_usb_phy_vbus_detect(phy)) {
|
|
+ dev_warn(phy->dev, "External vbus detected, not enabling our own vbus\n");
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
if (usb_phy->vbus) {
|
|
ret = regulator_set_enable(usb_phy->vbus, true);
|
|
if (ret && ret != -ENOSYS)
|