Openwrt-EcoNet/openwrt
1
0
Fork 0
Code Issues Pull Requests Actions Activity
main
openwrt/package/boot/uboot-d1/patches/0027-clk-sunxi-Add-NAND-clocks-and-resets.patch
Zoltan HERPAI d41d9befb9 uboot-d1: add bootloader for upcoming d1 target 
Add u-boot bootloader based on 2023.01 to support D1-based boards, currently:

 - Dongshan Nezha STU
 - LicheePi RV Dock
 - MangoPi MQ-Pro
 - Nezha D1

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-02-29 16:50:20 +01:00

296 lines
11 KiB
Diff
Raw Permalink Blame History

From 2f48dfc23d612f6f1798ff761854fd3141d0671f Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sun, 15 May 2022 21:29:22 -0500
Subject: [PATCH 27/90] clk: sunxi: Add NAND clocks and resets
Currently NAND clock setup is done in board code, both in SPL and in
U-Boot proper. Add the NAND clocks/resets here so they can be used by
the "full" NAND driver once it is converted to the driver model.
The bit locations are copied from the Linux CCU drivers.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/clk/sunxi/clk_a10.c | 2 ++
drivers/clk/sunxi/clk_a10s.c | 2 ++
drivers/clk/sunxi/clk_a23.c | 3 +++
drivers/clk/sunxi/clk_a31.c | 6 ++++++
drivers/clk/sunxi/clk_a64.c | 3 +++
drivers/clk/sunxi/clk_a80.c | 8 ++++++++
drivers/clk/sunxi/clk_a83t.c | 3 +++
drivers/clk/sunxi/clk_h3.c | 3 +++
drivers/clk/sunxi/clk_h6.c | 6 ++++++
drivers/clk/sunxi/clk_h616.c | 6 ++++++
drivers/clk/sunxi/clk_r40.c | 3 +++
11 files changed, 45 insertions(+)
--- a/drivers/clk/sunxi/clk_a10.c
+++ b/drivers/clk/sunxi/clk_a10.c
@@ -23,6 +23,7 @@ static struct ccu_clk_gate a10_gates[] =
[CLK_AHB_MMC1] = GATE(0x060, BIT(9)),
[CLK_AHB_MMC2] = GATE(0x060, BIT(10)),
[CLK_AHB_MMC3] = GATE(0x060, BIT(11)),
+ [CLK_AHB_NAND] = GATE(0x060, BIT(13)),
[CLK_AHB_EMAC] = GATE(0x060, BIT(17)),
[CLK_AHB_SPI0] = GATE(0x060, BIT(20)),
[CLK_AHB_SPI1] = GATE(0x060, BIT(21)),
@@ -47,6 +48,7 @@ static struct ccu_clk_gate a10_gates[] =
[CLK_APB1_UART6] = GATE(0x06c, BIT(22)),
[CLK_APB1_UART7] = GATE(0x06c, BIT(23)),
+ [CLK_NAND] = GATE(0x080, BIT(31)),
[CLK_SPI0] = GATE(0x0a0, BIT(31)),
[CLK_SPI1] = GATE(0x0a4, BIT(31)),
[CLK_SPI2] = GATE(0x0a8, BIT(31)),
--- a/drivers/clk/sunxi/clk_a10s.c
+++ b/drivers/clk/sunxi/clk_a10s.c
@@ -20,6 +20,7 @@ static struct ccu_clk_gate a10s_gates[]
[CLK_AHB_MMC0] = GATE(0x060, BIT(8)),
[CLK_AHB_MMC1] = GATE(0x060, BIT(9)),
[CLK_AHB_MMC2] = GATE(0x060, BIT(10)),
+ [CLK_AHB_NAND] = GATE(0x060, BIT(13)),
[CLK_AHB_EMAC] = GATE(0x060, BIT(17)),
[CLK_AHB_SPI0] = GATE(0x060, BIT(20)),
[CLK_AHB_SPI1] = GATE(0x060, BIT(21)),
@@ -35,6 +36,7 @@ static struct ccu_clk_gate a10s_gates[]
[CLK_APB1_UART2] = GATE(0x06c, BIT(18)),
[CLK_APB1_UART3] = GATE(0x06c, BIT(19)),
+ [CLK_NAND] = GATE(0x080, BIT(31)),
[CLK_SPI0] = GATE(0x0a0, BIT(31)),
[CLK_SPI1] = GATE(0x0a4, BIT(31)),
[CLK_SPI2] = GATE(0x0a8, BIT(31)),
--- a/drivers/clk/sunxi/clk_a23.c
+++ b/drivers/clk/sunxi/clk_a23.c
@@ -17,6 +17,7 @@ static struct ccu_clk_gate a23_gates[] =
[CLK_BUS_MMC0] = GATE(0x060, BIT(8)),
[CLK_BUS_MMC1] = GATE(0x060, BIT(9)),
[CLK_BUS_MMC2] = GATE(0x060, BIT(10)),
+ [CLK_BUS_NAND] = GATE(0x060, BIT(13)),
[CLK_BUS_SPI0] = GATE(0x060, BIT(20)),
[CLK_BUS_SPI1] = GATE(0x060, BIT(21)),
[CLK_BUS_OTG] = GATE(0x060, BIT(24)),
@@ -34,6 +35,7 @@ static struct ccu_clk_gate a23_gates[] =
[CLK_BUS_UART3] = GATE(0x06c, BIT(19)),
[CLK_BUS_UART4] = GATE(0x06c, BIT(20)),
+ [CLK_NAND] = GATE(0x080, BIT(31)),
[CLK_SPI0] = GATE(0x0a0, BIT(31)),
[CLK_SPI1] = GATE(0x0a4, BIT(31)),
@@ -52,6 +54,7 @@ static struct ccu_reset a23_resets[] = {
[RST_BUS_MMC0] = RESET(0x2c0, BIT(8)),
[RST_BUS_MMC1] = RESET(0x2c0, BIT(9)),
[RST_BUS_MMC2] = RESET(0x2c0, BIT(10)),
+ [RST_BUS_NAND] = RESET(0x2c0, BIT(13)),
[RST_BUS_SPI0] = RESET(0x2c0, BIT(20)),
[RST_BUS_SPI1] = RESET(0x2c0, BIT(21)),
[RST_BUS_OTG] = RESET(0x2c0, BIT(24)),
--- a/drivers/clk/sunxi/clk_a31.c
+++ b/drivers/clk/sunxi/clk_a31.c
@@ -18,6 +18,8 @@ static struct ccu_clk_gate a31_gates[] =
[CLK_AHB1_MMC1] = GATE(0x060, BIT(9)),
[CLK_AHB1_MMC2] = GATE(0x060, BIT(10)),
[CLK_AHB1_MMC3] = GATE(0x060, BIT(11)),
+ [CLK_AHB1_NAND1] = GATE(0x060, BIT(12)),
+ [CLK_AHB1_NAND0] = GATE(0x060, BIT(13)),
[CLK_AHB1_EMAC] = GATE(0x060, BIT(17)),
[CLK_AHB1_SPI0] = GATE(0x060, BIT(20)),
[CLK_AHB1_SPI1] = GATE(0x060, BIT(21)),
@@ -43,6 +45,8 @@ static struct ccu_clk_gate a31_gates[] =
[CLK_APB2_UART4] = GATE(0x06c, BIT(20)),
[CLK_APB2_UART5] = GATE(0x06c, BIT(21)),
+ [CLK_NAND0] = GATE(0x080, BIT(31)),
+ [CLK_NAND1] = GATE(0x084, BIT(31)),
[CLK_SPI0] = GATE(0x0a0, BIT(31)),
[CLK_SPI1] = GATE(0x0a4, BIT(31)),
[CLK_SPI2] = GATE(0x0a8, BIT(31)),
@@ -65,6 +69,8 @@ static struct ccu_reset a31_resets[] = {
[RST_AHB1_MMC1] = RESET(0x2c0, BIT(9)),
[RST_AHB1_MMC2] = RESET(0x2c0, BIT(10)),
[RST_AHB1_MMC3] = RESET(0x2c0, BIT(11)),
+ [RST_AHB1_NAND1] = RESET(0x2c0, BIT(12)),
+ [RST_AHB1_NAND0] = RESET(0x2c0, BIT(13)),
[RST_AHB1_EMAC] = RESET(0x2c0, BIT(17)),
[RST_AHB1_SPI0] = RESET(0x2c0, BIT(20)),
[RST_AHB1_SPI1] = RESET(0x2c0, BIT(21)),
--- a/drivers/clk/sunxi/clk_a64.c
+++ b/drivers/clk/sunxi/clk_a64.c
@@ -19,6 +19,7 @@ static const struct ccu_clk_gate a64_gat
[CLK_BUS_MMC0] = GATE(0x060, BIT(8)),
[CLK_BUS_MMC1] = GATE(0x060, BIT(9)),
[CLK_BUS_MMC2] = GATE(0x060, BIT(10)),
+ [CLK_BUS_NAND] = GATE(0x060, BIT(13)),
[CLK_BUS_EMAC] = GATE(0x060, BIT(17)),
[CLK_BUS_SPI0] = GATE(0x060, BIT(20)),
[CLK_BUS_SPI1] = GATE(0x060, BIT(21)),
@@ -39,6 +40,7 @@ static const struct ccu_clk_gate a64_gat
[CLK_BUS_UART3] = GATE(0x06c, BIT(19)),
[CLK_BUS_UART4] = GATE(0x06c, BIT(20)),
+ [CLK_NAND] = GATE(0x080, BIT(31)),
[CLK_SPI0] = GATE(0x0a0, BIT(31)),
[CLK_SPI1] = GATE(0x0a4, BIT(31)),
@@ -58,6 +60,7 @@ static const struct ccu_reset a64_resets
[RST_BUS_MMC0] = RESET(0x2c0, BIT(8)),
[RST_BUS_MMC1] = RESET(0x2c0, BIT(9)),
[RST_BUS_MMC2] = RESET(0x2c0, BIT(10)),
+ [RST_BUS_NAND] = RESET(0x2c0, BIT(13)),
[RST_BUS_EMAC] = RESET(0x2c0, BIT(17)),
[RST_BUS_SPI0] = RESET(0x2c0, BIT(20)),
[RST_BUS_SPI1] = RESET(0x2c0, BIT(21)),
--- a/drivers/clk/sunxi/clk_a80.c
+++ b/drivers/clk/sunxi/clk_a80.c
@@ -14,12 +14,18 @@
#include <linux/bitops.h>
static const struct ccu_clk_gate a80_gates[] = {
+ [CLK_NAND0_0] = GATE(0x400, BIT(31)),
+ [CLK_NAND0_1] = GATE(0x404, BIT(31)),
+ [CLK_NAND1_0] = GATE(0x408, BIT(31)),
+ [CLK_NAND1_1] = GATE(0x40c, BIT(31)),
[CLK_SPI0] = GATE(0x430, BIT(31)),
[CLK_SPI1] = GATE(0x434, BIT(31)),
[CLK_SPI2] = GATE(0x438, BIT(31)),
[CLK_SPI3] = GATE(0x43c, BIT(31)),
[CLK_BUS_MMC] = GATE(0x580, BIT(8)),
+ [CLK_BUS_NAND0] = GATE(0x580, BIT(12)),
+ [CLK_BUS_NAND1] = GATE(0x580, BIT(13)),
[CLK_BUS_SPI0] = GATE(0x580, BIT(20)),
[CLK_BUS_SPI1] = GATE(0x580, BIT(21)),
[CLK_BUS_SPI2] = GATE(0x580, BIT(22)),
@@ -42,6 +48,8 @@ static const struct ccu_clk_gate a80_gat
static const struct ccu_reset a80_resets[] = {
[RST_BUS_MMC] = RESET(0x5a0, BIT(8)),
+ [RST_BUS_NAND0] = RESET(0x5a0, BIT(12)),
+ [RST_BUS_NAND1] = RESET(0x5a0, BIT(13)),
[RST_BUS_SPI0] = RESET(0x5a0, BIT(20)),
[RST_BUS_SPI1] = RESET(0x5a0, BIT(21)),
[RST_BUS_SPI2] = RESET(0x5a0, BIT(22)),
--- a/drivers/clk/sunxi/clk_a83t.c
+++ b/drivers/clk/sunxi/clk_a83t.c
@@ -17,6 +17,7 @@ static struct ccu_clk_gate a83t_gates[]
[CLK_BUS_MMC0] = GATE(0x060, BIT(8)),
[CLK_BUS_MMC1] = GATE(0x060, BIT(9)),
[CLK_BUS_MMC2] = GATE(0x060, BIT(10)),
+ [CLK_BUS_NAND] = GATE(0x060, BIT(13)),
[CLK_BUS_EMAC] = GATE(0x060, BIT(17)),
[CLK_BUS_SPI0] = GATE(0x060, BIT(20)),
[CLK_BUS_SPI1] = GATE(0x060, BIT(21)),
@@ -36,6 +37,7 @@ static struct ccu_clk_gate a83t_gates[]
[CLK_BUS_UART3] = GATE(0x06c, BIT(19)),
[CLK_BUS_UART4] = GATE(0x06c, BIT(20)),
+ [CLK_NAND] = GATE(0x080, BIT(31)),
[CLK_SPI0] = GATE(0x0a0, BIT(31)),
[CLK_SPI1] = GATE(0x0a4, BIT(31)),
@@ -54,6 +56,7 @@ static struct ccu_reset a83t_resets[] =
[RST_BUS_MMC0] = RESET(0x2c0, BIT(8)),
[RST_BUS_MMC1] = RESET(0x2c0, BIT(9)),
[RST_BUS_MMC2] = RESET(0x2c0, BIT(10)),
+ [RST_BUS_NAND] = RESET(0x2c0, BIT(13)),
[RST_BUS_EMAC] = RESET(0x2c0, BIT(17)),
[RST_BUS_SPI0] = RESET(0x2c0, BIT(20)),
[RST_BUS_SPI1] = RESET(0x2c0, BIT(21)),
--- a/drivers/clk/sunxi/clk_h3.c
+++ b/drivers/clk/sunxi/clk_h3.c
@@ -19,6 +19,7 @@ static struct ccu_clk_gate h3_gates[] =
[CLK_BUS_MMC0] = GATE(0x060, BIT(8)),
[CLK_BUS_MMC1] = GATE(0x060, BIT(9)),
[CLK_BUS_MMC2] = GATE(0x060, BIT(10)),
+ [CLK_BUS_NAND] = GATE(0x060, BIT(13)),
[CLK_BUS_EMAC] = GATE(0x060, BIT(17)),
[CLK_BUS_SPI0] = GATE(0x060, BIT(20)),
[CLK_BUS_SPI1] = GATE(0x060, BIT(21)),
@@ -44,6 +45,7 @@ static struct ccu_clk_gate h3_gates[] =
[CLK_BUS_EPHY] = GATE(0x070, BIT(0)),
+ [CLK_NAND] = GATE(0x080, BIT(31)),
[CLK_SPI0] = GATE(0x0a0, BIT(31)),
[CLK_SPI1] = GATE(0x0a4, BIT(31)),
@@ -66,6 +68,7 @@ static struct ccu_reset h3_resets[] = {
[RST_BUS_MMC0] = RESET(0x2c0, BIT(8)),
[RST_BUS_MMC1] = RESET(0x2c0, BIT(9)),
[RST_BUS_MMC2] = RESET(0x2c0, BIT(10)),
+ [RST_BUS_NAND] = RESET(0x2c0, BIT(13)),
[RST_BUS_EMAC] = RESET(0x2c0, BIT(17)),
[RST_BUS_SPI0] = RESET(0x2c0, BIT(20)),
[RST_BUS_SPI1] = RESET(0x2c0, BIT(21)),
--- a/drivers/clk/sunxi/clk_h6.c
+++ b/drivers/clk/sunxi/clk_h6.c
@@ -18,6 +18,10 @@ static struct ccu_clk_gate h6_gates[] =
[CLK_APB1] = GATE_DUMMY,
+ [CLK_NAND0] = GATE(0x810, BIT(31)),
+ [CLK_NAND1] = GATE(0x814, BIT(31)),
+ [CLK_BUS_NAND] = GATE(0x82c, BIT(0)),
+
[CLK_BUS_MMC0] = GATE(0x84c, BIT(0)),
[CLK_BUS_MMC1] = GATE(0x84c, BIT(1)),
[CLK_BUS_MMC2] = GATE(0x84c, BIT(2)),
@@ -58,6 +62,8 @@ static struct ccu_clk_gate h6_gates[] =
};
static struct ccu_reset h6_resets[] = {
+ [RST_BUS_NAND] = RESET(0x82c, BIT(16)),
+
[RST_BUS_MMC0] = RESET(0x84c, BIT(16)),
[RST_BUS_MMC1] = RESET(0x84c, BIT(17)),
[RST_BUS_MMC2] = RESET(0x84c, BIT(18)),
--- a/drivers/clk/sunxi/clk_h616.c
+++ b/drivers/clk/sunxi/clk_h616.c
@@ -17,6 +17,10 @@ static struct ccu_clk_gate h616_gates[]
[CLK_APB1] = GATE_DUMMY,
+ [CLK_NAND0] = GATE(0x810, BIT(31)),
+ [CLK_NAND1] = GATE(0x814, BIT(31)),
+ [CLK_BUS_NAND] = GATE(0x82c, BIT(0)),
+
[CLK_BUS_MMC0] = GATE(0x84c, BIT(0)),
[CLK_BUS_MMC1] = GATE(0x84c, BIT(1)),
[CLK_BUS_MMC2] = GATE(0x84c, BIT(2)),
@@ -67,6 +71,8 @@ static struct ccu_clk_gate h616_gates[]
};
static struct ccu_reset h616_resets[] = {
+ [RST_BUS_NAND] = RESET(0x82c, BIT(16)),
+
[RST_BUS_MMC0] = RESET(0x84c, BIT(16)),
[RST_BUS_MMC1] = RESET(0x84c, BIT(17)),
[RST_BUS_MMC2] = RESET(0x84c, BIT(18)),
--- a/drivers/clk/sunxi/clk_r40.c
+++ b/drivers/clk/sunxi/clk_r40.c
@@ -18,6 +18,7 @@ static struct ccu_clk_gate r40_gates[] =
[CLK_BUS_MMC1] = GATE(0x060, BIT(9)),
[CLK_BUS_MMC2] = GATE(0x060, BIT(10)),
[CLK_BUS_MMC3] = GATE(0x060, BIT(11)),
+ [CLK_BUS_NAND] = GATE(0x060, BIT(13)),
[CLK_BUS_SPI0] = GATE(0x060, BIT(20)),
[CLK_BUS_SPI1] = GATE(0x060, BIT(21)),
[CLK_BUS_SPI2] = GATE(0x060, BIT(22)),
@@ -48,6 +49,7 @@ static struct ccu_clk_gate r40_gates[] =
[CLK_BUS_UART6] = GATE(0x06c, BIT(22)),
[CLK_BUS_UART7] = GATE(0x06c, BIT(23)),
+ [CLK_NAND] = GATE(0x080, BIT(31)),
[CLK_SPI0] = GATE(0x0a0, BIT(31)),
[CLK_SPI1] = GATE(0x0a4, BIT(31)),
[CLK_SPI2] = GATE(0x0a8, BIT(31)),
@@ -70,6 +72,7 @@ static struct ccu_reset r40_resets[] = {
[RST_BUS_MMC1] = RESET(0x2c0, BIT(9)),
[RST_BUS_MMC2] = RESET(0x2c0, BIT(10)),
[RST_BUS_MMC3] = RESET(0x2c0, BIT(11)),
+ [RST_BUS_NAND] = RESET(0x2c0, BIT(13)),
[RST_BUS_SPI0] = RESET(0x2c0, BIT(20)),
[RST_BUS_SPI1] = RESET(0x2c0, BIT(21)),
[RST_BUS_SPI2] = RESET(0x2c0, BIT(22)),
Reference in New Issue View Git Blame Copy Permalink