fb6e5953dc
Changes in 4.9.271 mm, vmstat: drop zone->lock in /proc/pagetypeinfo tweewide: Fix most Shebang lines scripts: switch explicitly to Python 3 netfilter: x_tables: Use correct memory barriers. NFC: nci: fix memory leak in nci_allocate_device NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() proc: Check /proc/$pid/attr/ writes against file opener net: hso: fix control-request directions mac80211: assure all fragments are encrypted mac80211: prevent mixed key and fragment cache attacks mac80211: properly handle A-MSDUs that start with an RFC 1042 header cfg80211: mitigate A-MSDU aggregation attacks mac80211: drop A-MSDUs on old ciphers mac80211: add fragment cache to sta_info mac80211: check defrag PN against current frame mac80211: prevent attacks on TKIP/WEP as well mac80211: do not accept/forward invalid EAPOL frames mac80211: extend protection against mixed key and fragment cache attacks ath10k: Validate first subframe of A-MSDU before processing the list dm snapshot: properly fix a crash when an origin has no snapshots kgdb: fix gcc-11 warnings harder misc/uss720: fix memory leak in uss720_probe mei: request autosuspend after sending rx flow control staging: iio: cdc: ad7746: avoid overwrite of num_channels iio: adc: ad7793: Add missing error code in ad7793_setup() USB: trancevibrator: fix control-request direction serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait' USB: serial: ti_usb_3410_5052: add startech.com device id USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011 USB: serial: ftdi_sio: add IDs for IDS GmbH Products USB: serial: pl2303: add device id for ADLINK ND-6530 GC net: usb: fix memory leak in smsc75xx_bind spi: Fix use-after-free with devm_spi_alloc_* Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails NFS: fix an incorrect limit in filelayout_decode_layout() NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce() NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config net/mlx4: Fix EEPROM dump support Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv" tipc: skb_linearize the head skb when reassembling msgs i2c: s3c2410: fix possible NULL pointer deref on read message after write i2c: i801: Don't generate an interrupt on bus reset perf jevents: Fix getting maximum number of fds platform/x86: hp_accel: Avoid invoking _INI to speed up resume serial: max310x: unregister uart driver in case of failure and abort net: fujitsu: fix potential null-ptr-deref net: caif: remove BUG_ON(dev == NULL) in caif_xmit char: hpet: add checks after calling ioremap isdn: mISDNinfineon: check/cleanup ioremap failure correctly in setup_io dmaengine: qcom_hidma: comment platform_driver_register call libertas: register sysfs groups properly media: dvb: Add check on sp8870_readreg return media: gspca: properly check for errors in po1030_probe() scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic openrisc: Define memory barrier mb btrfs: do not BUG_ON in link_to_fixup_dir platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI drm/amdgpu: Fix a use-after-free net: netcp: Fix an error message net: mdio: thunder: Fix a double free issue in the .remove function net: mdio: octeon: Fix some double free issues net: bnx2: Fix error return code in bnx2_init_board() mld: fix panic in mld_newpack() staging: emxx_udc: fix loop in _nbu2ss_nuke() ASoC: cs35l33: fix an error code in probe() scsi: libsas: Use _safe() loop in sas_resume_port() sch_dsmark: fix a NULL deref in qdisc_reset() MIPS: alchemy: xxs1500: add gpio-au1000.h header file MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c hugetlbfs: hugetlb_fault_mutex_hash() cleanup usb: core: reduce power-on-good delay time of root hub Linux 4.9.271 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I6da4427d9ada52cbebbcc4d69e74f9ecebd9ad8b
1214 lines
41 KiB
Perl
Executable File
1214 lines
41 KiB
Perl
Executable File
#!/usr/bin/env perl
|
|
|
|
# Copyright 2016 by Frank Rowand
|
|
# Copyright 2016 by Gaurav Minocha
|
|
#
|
|
# This file is subject to the terms and conditions of the GNU General Public
|
|
# License v2.
|
|
|
|
use strict 'refs';
|
|
use strict subs;
|
|
|
|
use Getopt::Long;
|
|
|
|
$VUFX = "160610a";
|
|
|
|
$script_name = $0;
|
|
$script_name =~ s|^.*/||;
|
|
|
|
|
|
# ----- constants for print_flags()
|
|
|
|
# Position in string $pr_flags. Range of 0..($num_pr_flags - 1).
|
|
$pr_flag_pos_mcompatible = 0;
|
|
$pr_flag_pos_driver = 1;
|
|
$pr_flag_pos_mdriver = 2;
|
|
$pr_flag_pos_config = 3;
|
|
$pr_flag_pos_mconfig = 4;
|
|
$pr_flag_pos_node_not_enabled = 5;
|
|
$pr_flag_pos_white_list = 6;
|
|
$pr_flag_pos_hard_coded = 7;
|
|
$pr_flag_pos_config_hard_coded = 8;
|
|
$pr_flag_pos_config_none = 9;
|
|
$pr_flag_pos_config_m = 10;
|
|
$pr_flag_pos_config_y = 11;
|
|
$pr_flag_pos_config_test_fail = 12;
|
|
|
|
$num_pr_flags = $pr_flag_pos_config_test_fail + 1;
|
|
|
|
# flags in @pr_flag_value must be unique values to allow simple regular
|
|
# expessions to work for --include_flags and --exclude_flags.
|
|
# Convention: use upper case letters for potential issues or problems.
|
|
|
|
@pr_flag_value = ('M', 'd', 'D', 'c', 'C', 'E', 'W', 'H', 'x', 'n', 'm', 'y', 'F');
|
|
|
|
@pr_flag_help = (
|
|
"multiple compatibles found for this node",
|
|
"driver found for this compatible",
|
|
"multiple drivers found for this compatible",
|
|
"kernel config found for this driver",
|
|
"multiple config options found for this driver",
|
|
"node is not enabled",
|
|
"compatible is white listed",
|
|
"matching driver and/or kernel config is hard coded",
|
|
"kernel config hard coded in Makefile",
|
|
"one or more kernel config file options is not set",
|
|
"one or more kernel config file options is set to 'm'",
|
|
"one or more kernel config file options is set to 'y'",
|
|
"one of more kernel config file options fails to have correct value"
|
|
);
|
|
|
|
|
|
# -----
|
|
|
|
%driver_config = (); # driver config array, indexed by driver source file
|
|
%driver_count = (); # driver_cnt, indexed by compatible
|
|
%compat_driver = (); # compatible driver array, indexed by compatible
|
|
%existing_config = (); # existing config symbols present in given config file
|
|
# expected values are: "y", "m", a decimal number, a
|
|
# hex number, or a string
|
|
|
|
# ----- magic compatibles, do not have a driver
|
|
#
|
|
# Will not search for drivers for these compatibles.
|
|
|
|
%compat_white_list = (
|
|
'none' => '1',
|
|
'pci' => '1',
|
|
'simple-bus' => '1',
|
|
);
|
|
|
|
# Will not search for drivers for these compatibles.
|
|
#
|
|
# These compatibles have a very large number of false positives.
|
|
#
|
|
# 'hardcoded_no_driver' is a magic value. Other code knows this
|
|
# magic value. Do not use 'no_driver' here!
|
|
#
|
|
# Revisit each 'hardcoded_no_driver' to see how the compatible
|
|
# is used. Are there drivers that can be provided?
|
|
|
|
%driver_hard_code_list = (
|
|
'cache' => ['hardcoded_no_driver'],
|
|
'eeprom' => ['hardcoded_no_driver'],
|
|
'gpio' => ['hardcoded_no_driver'],
|
|
'gpio-keys' => ['drivers/input/keyboard/gpio_keys.c'],
|
|
'i2c-gpio' => ['drivers/i2c/busses/i2c-gpio.c'],
|
|
'isa' => ['arch/mips/mti-malta/malta-dt.c',
|
|
'arch/x86/kernel/devicetree.c'],
|
|
'led' => ['hardcoded_no_driver'],
|
|
'm25p32' => ['hardcoded_no_driver'],
|
|
'm25p64' => ['hardcoded_no_driver'],
|
|
'm25p80' => ['hardcoded_no_driver'],
|
|
'mtd-ram' => ['drivers/mtd/maps/physmap_of.c'],
|
|
'pwm-backlight' => ['drivers/video/backlight/pwm_bl.c'],
|
|
'spidev' => ['hardcoded_no_driver'],
|
|
'syscon' => ['drivers/mfd/syscon.c'],
|
|
'tlv320aic23' => ['hardcoded_no_driver'],
|
|
'wm8731' => ['hardcoded_no_driver'],
|
|
);
|
|
|
|
# Use these config options instead of searching makefiles
|
|
|
|
%driver_config_hard_code_list = (
|
|
|
|
# this one needed even if %driver_hard_code_list is empty
|
|
'no_driver' => ['no_config'],
|
|
'hardcoded_no_driver' => ['no_config'],
|
|
|
|
# drivers/usb/host/ehci-ppc-of.c
|
|
# drivers/usb/host/ehci-xilinx-of.c
|
|
# are included from:
|
|
# drivers/usb/host/ehci-hcd.c
|
|
# thus the search of Makefile for the included .c files is incorrect
|
|
# ehci-hcd.c wraps the includes with ifdef CONFIG_USB_EHCI_HCD_..._OF
|
|
#
|
|
# similar model for ohci-hcd.c (but no ohci-xilinx-of.c)
|
|
#
|
|
# similarly, uhci-hcd.c includes uhci-platform.c
|
|
|
|
'drivers/usb/host/ehci-ppc-of.c' => ['CONFIG_USB_EHCI_HCD',
|
|
'CONFIG_USB_EHCI_HCD_PPC_OF'],
|
|
'drivers/usb/host/ohci-ppc-of.c' => ['CONFIG_USB_OHCI_HCD',
|
|
'CONFIG_USB_OHCI_HCD_PPC_OF'],
|
|
|
|
'drivers/usb/host/ehci-xilinx-of.c' => ['CONFIG_USB_EHCI_HCD',
|
|
'CONFIG_USB_EHCI_HCD_XILINX'],
|
|
|
|
'drivers/usb/host/uhci-platform.c' => ['CONFIG_USB_UHCI_HCD',
|
|
'CONFIG_USB_UHCI_PLATFORM'],
|
|
|
|
# scan_makefile will find only one of these config options:
|
|
# ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)
|
|
'arch/arm/mach-imx/platsmp.c' => ['CONFIG_SOC_IMX6 && CONFIG_SMP',
|
|
'CONFIG_SOC_LS1021A && CONFIG_SMP'],
|
|
);
|
|
|
|
|
|
# 'virt/kvm/arm/.*' are controlled by makefiles in other directories,
|
|
# using relative paths, such as 'KVM := ../../../virt/kvm'. Do not
|
|
# add complexity to find_kconfig() to deal with this. There is a long
|
|
# term intent to change the kvm related makefiles to the normal kernel
|
|
# style. After that is done, this entry can be removed from the
|
|
# black_list_driver.
|
|
|
|
@black_list_driver = (
|
|
# kvm no longer a problem after commit 503a62862e8f in 4.7-rc1
|
|
# 'virt/kvm/arm/.*',
|
|
);
|
|
|
|
|
|
sub usage()
|
|
{
|
|
print
|
|
"
|
|
Usage: $script_name [options] device-tree...
|
|
|
|
device_tree is: dts_file | dtb_file | proc_device-tree
|
|
|
|
|
|
Valid options:
|
|
-c FILE Read kernel config options from FILE
|
|
--config FILE synonym for 'c'
|
|
--config-format config file friendly output format
|
|
--exclude-flag FLAG exclude entries with a matching flag
|
|
-h Display this message and exit
|
|
--help synonym for 'h'
|
|
--black-list-driver use driver black list
|
|
--white-list-config use config white list
|
|
--white-list-driver use driver white list
|
|
--include-flag FLAG include only entries with a matching flag
|
|
--include-suspect include only entries with an uppercase flag
|
|
--short-name do not show the path portion of the node name
|
|
--show-lists report of white and black lists
|
|
--version Display program version and exit
|
|
|
|
|
|
Report driver source files that match the compatibles in the device
|
|
tree file and the kernel config options that enable the driver source
|
|
files.
|
|
|
|
This program must be run in the root directory of a Linux kernel
|
|
source tree.
|
|
|
|
The default format is a report that is intended to be easily human
|
|
scannable.
|
|
|
|
An alternate format can be selected by --config-format. This will
|
|
create output that can easily be edited to create a fragment that can
|
|
be appended to the existing kernel config file. Each entry consists of
|
|
multiple lines. The first line reports flags, the node path, compatible
|
|
value, driver file matching the compatible, configuration options, and
|
|
current values of the configuration options. For each configuration
|
|
option, the following lines report the current value and the value that
|
|
is required for the driver file to be included in the kernel.
|
|
|
|
If a large number of drivers or config options is listed for a node,
|
|
and the '$pr_flag_value[$pr_flag_pos_hard_coded]' flag is set consider using --white-list-config and/or
|
|
--white-list-driver. If the white list option suppresses the correct
|
|
entry please report that as a bug.
|
|
|
|
CAUTION:
|
|
This program uses heuristics to guess which driver(s) support each
|
|
compatible string and which config option(s) enables the driver(s).
|
|
Do not believe that the reported information is fully correct.
|
|
This program is intended to aid the process of determining the
|
|
proper kernel configuration for a device tree, but this is not
|
|
a fully automated process -- human involvement may still be
|
|
required!
|
|
|
|
The driver match heuristic used is to search for source files
|
|
containing the compatible string enclosed in quotes.
|
|
|
|
This program might not be able to find all drivers matching a
|
|
compatible string.
|
|
|
|
Some makefiles are overly clever. This program was not made
|
|
complex enough to handle them. If no config option is listed
|
|
for a driver, look at the makefile for the driver source file.
|
|
Even if a config option is listed for a driver, some other
|
|
available config options may not be listed.
|
|
|
|
FLAG values:
|
|
";
|
|
|
|
for ($k = 0; $k < $num_pr_flags; $k++) {
|
|
printf " %s %s\n", $pr_flag_value[$k], $pr_flag_help[$k];
|
|
}
|
|
|
|
print
|
|
"
|
|
Upper case letters indicate potential issues or problems.
|
|
|
|
The flag:
|
|
|
|
";
|
|
|
|
$k = $pr_flag_pos_hard_coded;
|
|
printf " %s %s\n", $pr_flag_value[$k], $pr_flag_help[$k];
|
|
|
|
print
|
|
"
|
|
will be set if the config or driver is in the white lists, even if
|
|
--white-list-config and --white-list-driver are not specified.
|
|
This is a hint that 1) many of these reported lines are likely to
|
|
be incorrect, and 2) using those options will reduce the number of
|
|
drivers and/or config options reported.
|
|
|
|
--white-list-config and --white-list-driver may not be accurate if this
|
|
program is not well maintained. Use them with appropriate skepticism.
|
|
Use the --show-lists option to report the values in the list.
|
|
|
|
Return value:
|
|
0 if no error
|
|
1 error processing command line
|
|
2 unable to open or read kernel config file
|
|
3 unable to open or process input device tree file(s)
|
|
|
|
EXAMPLES:
|
|
|
|
dt_to_config arch/arm/boot/dts/my_dts_file.dts
|
|
|
|
Basic report.
|
|
|
|
dt_to_config \\
|
|
--config \${KBUILD_OUTPUT}/.config \\
|
|
arch/\${ARCH}/boot/dts/my_dts_file.dts
|
|
|
|
Full report, with config file issues noted.
|
|
|
|
dt_to_config --include-suspect \\
|
|
--config \${KBUILD_OUTPUT}/.config \\
|
|
arch/\${ARCH}/boot/dts/my_dts_file.dts
|
|
|
|
Report of node / compatible string / driver tuples that should
|
|
be further investigated. A node may have multiple compatible
|
|
strings. A compatible string may be matched by multiple drivers.
|
|
A driver may have config file issues noted. The compatible string
|
|
and/or driver may be in the white lists.
|
|
|
|
dt_to_config --include-suspect --config-format \\
|
|
--config ${KBUILD_OUTPUT}/.config \\
|
|
arch/\${ARCH}/boot/dts/my_dts_file.dts
|
|
|
|
Report of node / compatible string / driver tuples that should
|
|
be further investigated. The report can be edited to uncomment
|
|
the config options to select the desired tuple for a given node.
|
|
A node may have multiple compatible strings. A compatible string
|
|
may be matched by multiple drivers. A driver may have config file
|
|
issues noted. The compatible string and/or driver may be in the
|
|
white lists.
|
|
|
|
";
|
|
}
|
|
|
|
sub set_flag()
|
|
{
|
|
# pr_flags_ref is a reference to $pr_flags
|
|
|
|
my $pr_flags_ref = shift;
|
|
my $pos = shift;
|
|
|
|
substr $$pr_flags_ref, $pos, 1, $pr_flag_value[$pos];
|
|
|
|
return $pr_flags;
|
|
}
|
|
|
|
sub print_flags()
|
|
{
|
|
# return 1 if anything printed, else 0
|
|
|
|
# some fields of pn_arg_ref might not be used in this function, but
|
|
# extract all of them anyway.
|
|
my $pn_arg_ref = shift;
|
|
|
|
my $compat = $pn_arg_ref->{compat};
|
|
my $compatible_cnt = $pn_arg_ref->{compatible_cnt};
|
|
my $config = $pn_arg_ref->{config};
|
|
my $config_cnt = $pn_arg_ref->{config_cnt};
|
|
my $driver = $pn_arg_ref->{driver};
|
|
my $driver_cnt = $pn_arg_ref->{driver_cnt};
|
|
my $full_node = $pn_arg_ref->{full_node};
|
|
my $node = $pn_arg_ref->{node};
|
|
my $node_enabled = $pn_arg_ref->{node_enabled};
|
|
my $white_list = $pn_arg_ref->{white_list};
|
|
|
|
my $pr_flags = '-' x $num_pr_flags;
|
|
|
|
|
|
# ----- set flags in $pr_flags
|
|
|
|
if ($compatible_cnt > 1) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_mcompatible);
|
|
}
|
|
|
|
if ($config_cnt > 1) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_mconfig);
|
|
}
|
|
|
|
if ($driver_cnt >= 1) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_driver);
|
|
}
|
|
|
|
if ($driver_cnt > 1) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_mdriver);
|
|
}
|
|
|
|
# These strings are the same way the linux kernel tests.
|
|
# The ePapr lists of values is slightly different.
|
|
if (!(
|
|
($node_enabled eq "") ||
|
|
($node_enabled eq "ok") ||
|
|
($node_enabled eq "okay")
|
|
)) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_node_not_enabled);
|
|
}
|
|
|
|
if ($white_list) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_white_list);
|
|
}
|
|
|
|
if (exists($driver_hard_code_list{$compat}) ||
|
|
(exists($driver_config_hard_code_list{$driver}) &&
|
|
($driver ne "no_driver"))) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_hard_coded);
|
|
}
|
|
|
|
my @configs = split(' && ', $config);
|
|
for $configs (@configs) {
|
|
$not = $configs =~ /^!/;
|
|
$configs =~ s/^!//;
|
|
|
|
if (($configs ne "no_config") && ($configs ne "no_makefile")) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_config);
|
|
}
|
|
|
|
if (($config_cnt >= 1) &&
|
|
($configs !~ /CONFIG_/) &&
|
|
(($configs ne "no_config") && ($configs ne "no_makefile"))) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_config_hard_coded);
|
|
}
|
|
|
|
my $existing_config = $existing_config{$configs};
|
|
if ($existing_config eq "m") {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_config_m);
|
|
# Possible fail, depends on whether built in or
|
|
# module is desired.
|
|
&set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
|
|
} elsif ($existing_config eq "y") {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_config_y);
|
|
if ($not) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
|
|
}
|
|
} elsif (($config_file) && ($configs =~ /CONFIG_/)) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_config_none);
|
|
if (!$not) {
|
|
&set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
|
|
}
|
|
}
|
|
}
|
|
|
|
# ----- include / exclude filters
|
|
|
|
if ($include_flag_pattern && ($pr_flags !~ m/$include_flag_pattern/)) {
|
|
return 0;
|
|
}
|
|
|
|
if ($exclude_flag_pattern && ($pr_flags =~ m/$exclude_flag_pattern/)) {
|
|
return 0;
|
|
}
|
|
|
|
if ($config_format) {
|
|
print "# ";
|
|
}
|
|
print "$pr_flags : ";
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
sub print_node()
|
|
{
|
|
# return number of lines printed
|
|
|
|
# some fields of pn_arg_ref might not be used in this function, but
|
|
# extract all of them anyway.
|
|
my $pn_arg_ref = shift;
|
|
|
|
my $compat = $pn_arg_ref->{compat};
|
|
my $compatible_cnt = $pn_arg_ref->{compatible_cnt};
|
|
my $config = $pn_arg_ref->{config};
|
|
my $config_cnt = $pn_arg_ref->{config_cnt};
|
|
my $driver = $pn_arg_ref->{driver};
|
|
my $driver_cnt = $pn_arg_ref->{driver_cnt};
|
|
my $full_node = $pn_arg_ref->{full_node};
|
|
my $node = $pn_arg_ref->{node};
|
|
my $node_enabled = $pn_arg_ref->{node_enabled};
|
|
my $white_list = $pn_arg_ref->{white_list};
|
|
|
|
my $separator;
|
|
|
|
if (! &print_flags($pn_arg_ref)) {
|
|
return 0;
|
|
}
|
|
|
|
|
|
if ($short_name) {
|
|
print "$node";
|
|
} else {
|
|
print "$full_node";
|
|
}
|
|
print " : $compat : $driver : $config : ";
|
|
|
|
my @configs = split(' && ', $config);
|
|
|
|
if ($config_file) {
|
|
for $configs (@configs) {
|
|
$configs =~ s/^!//;
|
|
my $existing_config = $existing_config{$configs};
|
|
if (!$existing_config) {
|
|
# check for /-m/, /-y/, or /-objs/
|
|
if ($configs !~ /CONFIG_/) {
|
|
$existing_config = "x";
|
|
};
|
|
};
|
|
if ($existing_config) {
|
|
print "$separator", "$existing_config";
|
|
$separator = ", ";
|
|
} else {
|
|
print "$separator", "n";
|
|
$separator = ", ";
|
|
}
|
|
}
|
|
} else {
|
|
print "none";
|
|
}
|
|
|
|
print "\n";
|
|
|
|
if ($config_format) {
|
|
for $configs (@configs) {
|
|
$not = $configs =~ /^!/;
|
|
$configs =~ s/^!//;
|
|
my $existing_config = $existing_config{$configs};
|
|
|
|
if ($not) {
|
|
if ($configs !~ /CONFIG_/) {
|
|
print "# $configs\n";
|
|
} elsif ($existing_config eq "m") {
|
|
print "# $configs is m\n";
|
|
print "# $configs=n\n";
|
|
} elsif ($existing_config eq "y") {
|
|
print "# $configs is set\n";
|
|
print "# $configs=n\n";
|
|
} else {
|
|
print "# $configs is not set\n";
|
|
print "# $configs=n\n";
|
|
}
|
|
|
|
} else {
|
|
if ($configs !~ /CONFIG_/) {
|
|
print "# $configs\n";
|
|
} elsif ($existing_config eq "m") {
|
|
print "# $configs is m\n";
|
|
print "# $configs=y\n";
|
|
} elsif ($existing_config eq "y") {
|
|
print "# $configs is set\n";
|
|
print "# $configs=y\n";
|
|
} else {
|
|
print "# $configs is not set\n";
|
|
print "# $configs=y\n";
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
sub scan_makefile
|
|
{
|
|
my $pn_arg_ref = shift;
|
|
my $driver = shift;
|
|
|
|
# ----- Find Kconfig symbols that enable driver
|
|
|
|
my ($dir, $base) = $driver =~ m{(.*)/(.*).c};
|
|
|
|
my $makefile = $dir . "/Makefile";
|
|
if (! -r $makefile) {
|
|
$makefile = $dir . "/Kbuild";
|
|
}
|
|
if (! -r $makefile) {
|
|
my $config;
|
|
|
|
$config = 'no_makefile';
|
|
push @{ $driver_config{$driver} }, $config;
|
|
return;
|
|
}
|
|
|
|
if (!open(MAKEFILE_FILE, "<", "$makefile")) {
|
|
return;
|
|
}
|
|
|
|
my $line;
|
|
my @config;
|
|
my @if_config;
|
|
my @make_var;
|
|
|
|
NEXT_LINE:
|
|
while ($next_line = <MAKEFILE_FILE>) {
|
|
my $config;
|
|
my $if_config;
|
|
my $ifdef;
|
|
my $ifeq;
|
|
my $ifndef;
|
|
my $ifneq;
|
|
my $ifdef_config;
|
|
my $ifeq_config;
|
|
my $ifndef_config;
|
|
my $ifneq_config;
|
|
|
|
chomp($next_line);
|
|
$line = $line . $next_line;
|
|
if ($next_line =~ /\\$/) {
|
|
$line =~ s/\\$/ /;
|
|
next NEXT_LINE;
|
|
}
|
|
if ($line =~ /^\s*#/) {
|
|
$line = "";
|
|
next NEXT_LINE;
|
|
}
|
|
|
|
# ----- condition ... else ... endif
|
|
|
|
if ($line =~ /^([ ]\s*|)else\b/) {
|
|
$if_config = "!" . pop @if_config;
|
|
$if_config =~ s/^!!//;
|
|
push @if_config, $if_config;
|
|
$line =~ s/^([ ]\s*|)else\b//;
|
|
}
|
|
|
|
($null, $ifeq_config, $ifeq_config_val ) = $line =~ /^([ ]\s*|)ifeq\b.*\b(CONFIG_[A-Za-z0-9_]*)(.*)/;
|
|
($null, $ifneq_config, $ifneq_config_val) = $line =~ /^([ ]\s*|)ifneq\b.*\b(CONFIG_[A-Za-z0-9_]*)(.*)/;
|
|
($null, $ifdef_config) = $line =~ /^([ ]\s*|)ifdef\b.*\b(CONFIG_[A-Za-z0-9_]*)/;
|
|
($null, $ifndef_config) = $line =~ /^([ ]\s*|)ifndef\b.*\b(CONFIG_[A-Za-z0-9_]*)/;
|
|
|
|
($null, $ifeq) = $line =~ /^([ ]\s*|)ifeq\b\s*(.*)/;
|
|
($null, $ifneq) = $line =~ /^([ ]\s*|)ifneq\b\s*(.*)/;
|
|
($null, $ifdef) = $line =~ /^([ ]\s*|)ifdef\b\s*(.*)/;
|
|
($null, $ifndef) = $line =~ /^([ ]\s*|)ifndef\b\s*(.*)/;
|
|
|
|
# Order of tests is important. Prefer "CONFIG_*" regex match over
|
|
# less specific regex match.
|
|
if ($ifdef_config) {
|
|
$if_config = $ifdef_config;
|
|
} elsif ($ifeq_config) {
|
|
if ($ifeq_config_val =~ /y/) {
|
|
$if_config = $ifeq_config;
|
|
} else {
|
|
$if_config = "!" . $ifeq_config;
|
|
}
|
|
} elsif ($ifndef_config) {
|
|
$if_config = "!" . $ifndef_config;
|
|
} elsif ($ifneq_config) {
|
|
if ($ifneq_config_val =~ /y/) {
|
|
$if_config = "!" . $ifneq_config;
|
|
} else {
|
|
$if_config = $ifneq_config;
|
|
}
|
|
} elsif ($ifdef) {
|
|
$if_config = $ifdef;
|
|
} elsif ($ifeq) {
|
|
$if_config = $ifeq;
|
|
} elsif ($ifndef) {
|
|
$if_config = "!" . $ifndef;
|
|
} elsif ($ifneq) {
|
|
$if_config = "!" . $ifneq;
|
|
} else {
|
|
$if_config = "";
|
|
}
|
|
$if_config =~ s/^!!//;
|
|
|
|
if ($if_config) {
|
|
push @if_config, $if_config;
|
|
$line = "";
|
|
next NEXT_LINE;
|
|
}
|
|
|
|
if ($line =~ /^([ ]\s*|)endif\b/) {
|
|
pop @if_config;
|
|
$line = "";
|
|
next NEXT_LINE;
|
|
}
|
|
|
|
# ----- simple CONFIG_* = *.[co] or xxx [+:?]*= *.[co]
|
|
# Most makefiles select on *.o, but
|
|
# arch/powerpc/boot/Makefile selects on *.c
|
|
|
|
($config) = $line =~ /(CONFIG_[A-Za-z0-9_]+).*\b$base.[co]\b/;
|
|
|
|
# ----- match a make variable instead of *.[co]
|
|
# Recursively expanded variables are not handled.
|
|
|
|
if (!$config) {
|
|
my $make_var;
|
|
($make_var) = $line =~ /\s*(\S+?)\s*[+:\?]*=.*\b$base.[co]\b/;
|
|
if ($make_var) {
|
|
if ($make_var =~ /[a-zA-Z0-9]+-[ym]/) {
|
|
$config = $make_var;
|
|
} elsif ($make_var =~ /[a-zA-Z0-9]+-objs/) {
|
|
$config = $make_var;
|
|
} else {
|
|
push @make_var, $make_var;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!$config) {
|
|
for $make_var (@make_var) {
|
|
($config) = $line =~ /(CONFIG_[A-Za-z0-9_]+).*\b$make_var\b/;
|
|
last if ($config);
|
|
}
|
|
}
|
|
|
|
if (!$config) {
|
|
for $make_var (@make_var) {
|
|
($config) = $line =~ /\s*(\S+?)\s*[+:\?]*=.*\b$make_var\b/;
|
|
last if ($config);
|
|
}
|
|
}
|
|
|
|
# ----- next if no config found
|
|
|
|
if (!$config) {
|
|
$line = "";
|
|
next NEXT_LINE;
|
|
}
|
|
|
|
for $if_config (@if_config) {
|
|
$config = $if_config . " && " . $config;
|
|
}
|
|
|
|
push @{ $driver_config{$driver} }, $config;
|
|
|
|
$line = "";
|
|
}
|
|
|
|
close(MAKEFILE_FILE);
|
|
|
|
}
|
|
|
|
|
|
sub find_kconfig
|
|
{
|
|
my $pn_arg_ref = shift;
|
|
my $driver = shift;
|
|
|
|
my $lines_printed = 0;
|
|
my @configs;
|
|
|
|
if (!@{ $driver_config{$driver} }) {
|
|
&scan_makefile($pn_arg_ref, $driver);
|
|
if (!@{ $driver_config{$driver} }) {
|
|
push @{ $driver_config{$driver} }, "no_config";
|
|
}
|
|
}
|
|
|
|
@configs = @{ $driver_config{$driver} };
|
|
|
|
$$pn_arg_ref{config_cnt} = $#configs + 1;
|
|
for my $config (@configs) {
|
|
$$pn_arg_ref{config} = $config;
|
|
$lines_printed += &print_node($pn_arg_ref);
|
|
}
|
|
|
|
return $lines_printed;
|
|
}
|
|
|
|
|
|
sub handle_compatible()
|
|
{
|
|
my $full_node = shift;
|
|
my $node = shift;
|
|
my $compatible = shift;
|
|
my $node_enabled = shift;
|
|
|
|
my $compat;
|
|
my $lines_printed = 0;
|
|
my %pn_arg = ();
|
|
|
|
return if (!$node or !$compatible);
|
|
|
|
# Do not process compatible property of root node,
|
|
# it is used to match board, not to bind a driver.
|
|
return if ($node eq "/");
|
|
|
|
$pn_arg{full_node} = $full_node;
|
|
$pn_arg{node} = $node;
|
|
$pn_arg{node_enabled} = $node_enabled;
|
|
|
|
my @compatibles = split('", "', $compatible);
|
|
|
|
$compatibles[0] =~ s/^"//;
|
|
$compatibles[$#compatibles] =~ s/"$//;
|
|
|
|
$pn_arg{compatible_cnt} = $#compatibles + 1;
|
|
|
|
COMPAT:
|
|
for $compat (@compatibles) {
|
|
|
|
$pn_arg{compat} = $compat;
|
|
$pn_arg{driver_cnt} = 0;
|
|
$pn_arg{white_list} = 0;
|
|
|
|
if (exists($compat_white_list{$compat})) {
|
|
$pn_arg{white_list} = 1;
|
|
$pn_arg{driver} = "no_driver";
|
|
$pn_arg{config_cnt} = 1;
|
|
$pn_arg{config} = "no_config";
|
|
$lines_printed += &print_node(\%pn_arg);
|
|
next COMPAT;
|
|
}
|
|
|
|
# ----- if compat previously seen, use cached info
|
|
|
|
if (exists($compat_driver{$compat})) {
|
|
for my $driver (@{ $compat_driver{$compat} }) {
|
|
$pn_arg{driver} = $driver;
|
|
$pn_arg{driver_cnt} = $driver_count{$compat};
|
|
$pn_arg{config_cnt} = $#{ $driver_config{$driver}} + 1;
|
|
|
|
for my $config (@{ $driver_config{$driver} }) {
|
|
$pn_arg{config} = $config;
|
|
$lines_printed += &print_node(\%pn_arg);
|
|
}
|
|
|
|
if (!@{ $driver_config{$driver} }) {
|
|
# no config cached yet
|
|
# $driver in %driver_hard_code_list
|
|
# but not %driver_config_hard_code_list
|
|
$lines_printed += &find_kconfig(\%pn_arg, $driver);
|
|
}
|
|
}
|
|
next COMPAT;
|
|
}
|
|
|
|
|
|
# ----- Find drivers (source files that contain compatible)
|
|
|
|
# this will miss arch/sparc/include/asm/parport.h
|
|
# It is better to move the compatible out of the .h
|
|
# than to add *.h. to the files list, because *.h generates
|
|
# a lot of false negatives.
|
|
my $files = '"*.c"';
|
|
my $drivers = `git grep -l '"$compat"' -- $files`;
|
|
chomp($drivers);
|
|
if ($drivers eq "") {
|
|
$pn_arg{driver} = "no_driver";
|
|
$pn_arg{config_cnt} = 1;
|
|
$pn_arg{config} = "no_config";
|
|
push @{ $compat_driver{$compat} }, "no_driver";
|
|
$lines_printed += &print_node(\%pn_arg);
|
|
next COMPAT;
|
|
}
|
|
|
|
my @drivers = split("\n", $drivers);
|
|
$driver_count{$compat} = $#drivers + 1;
|
|
$pn_arg{driver_cnt} = $#drivers + 1;
|
|
|
|
DRIVER:
|
|
for my $driver (@drivers) {
|
|
push @{ $compat_driver{$compat} }, $driver;
|
|
$pn_arg{driver} = $driver;
|
|
|
|
# ----- if driver previously seen, use cached info
|
|
|
|
$pn_arg{config_cnt} = $#{ $driver_config{$driver} } + 1;
|
|
for my $config (@{ $driver_config{$driver} }) {
|
|
$pn_arg{config} = $config;
|
|
$lines_printed += &print_node(\%pn_arg);
|
|
}
|
|
if (@{ $driver_config{$driver} }) {
|
|
next DRIVER;
|
|
}
|
|
|
|
if ($black_list_driver) {
|
|
for $black (@black_list_driver) {
|
|
next DRIVER if ($driver =~ /^$black$/);
|
|
}
|
|
}
|
|
|
|
|
|
# ----- Find Kconfig symbols that enable driver
|
|
|
|
$lines_printed += &find_kconfig(\%pn_arg, $driver);
|
|
|
|
}
|
|
}
|
|
|
|
# White space (line) between nodes for readability.
|
|
# Each node may report several compatibles.
|
|
# For each compatible, multiple drivers may be reported.
|
|
# For each driver, multiple CONFIG_ options may be reported.
|
|
if ($lines_printed) {
|
|
print "\n";
|
|
}
|
|
}
|
|
|
|
sub read_dts()
|
|
{
|
|
my $file = shift;
|
|
|
|
my $compatible = "";
|
|
my $line;
|
|
my $node = "";
|
|
my $node_enabled = "";
|
|
|
|
if (! -r $file) {
|
|
print STDERR "file '$file' is not readable or does not exist\n";
|
|
exit 3;
|
|
}
|
|
|
|
if (!open(DT_FILE, "-|", "$dtx_diff $file")) {
|
|
print STDERR "\n";
|
|
print STDERR "shell command failed:\n";
|
|
print STDERR " $dtx_diff $file\n";
|
|
print STDERR "\n";
|
|
exit 3;
|
|
}
|
|
|
|
FILE:
|
|
while ($line = <DT_FILE>) {
|
|
chomp($line);
|
|
|
|
if ($line =~ /{/) {
|
|
|
|
&handle_compatible($full_node, $node, $compatible,
|
|
$node_enabled);
|
|
|
|
while ($end_node_count-- > 0) {
|
|
pop @full_node;
|
|
};
|
|
$end_node_count = 0;
|
|
$full_node = @full_node[-1];
|
|
|
|
$node = $line;
|
|
$node =~ s/^\s*(.*)\s+\{.*/$1/;
|
|
$node =~ s/.*: //;
|
|
if ($node eq '/' ) {
|
|
$full_node = '/';
|
|
} elsif ($full_node ne '/') {
|
|
$full_node = $full_node . '/' . $node;
|
|
} else {
|
|
$full_node = '/' . $node;
|
|
}
|
|
push @full_node, $full_node;
|
|
|
|
$compatible = "";
|
|
$node_enabled = "";
|
|
next FILE;
|
|
}
|
|
|
|
if ($line =~ /}/) {
|
|
$end_node_count++;
|
|
}
|
|
|
|
if ($line =~ /(\s+|^)status =/) {
|
|
$node_enabled = $line;
|
|
$node_enabled =~ s/^\t*//;
|
|
$node_enabled =~ s/^status = "//;
|
|
$node_enabled =~ s/";$//;
|
|
next FILE;
|
|
}
|
|
|
|
if ($line =~ /(\s+|^)compatible =/) {
|
|
# Extract all compatible entries for this device
|
|
# White space matching here and in handle_compatible() is
|
|
# precise, because input format is the output of dtc,
|
|
# which is invoked by dtx_diff.
|
|
$compatible = $line;
|
|
$compatible =~ s/^\t*//;
|
|
$compatible =~ s/^compatible = //;
|
|
$compatible =~ s/;$//;
|
|
}
|
|
}
|
|
|
|
&handle_compatible($full_node, $node, $compatible, $node_enabled);
|
|
|
|
close(DT_FILE);
|
|
}
|
|
|
|
|
|
sub read_config_file()
|
|
{
|
|
if (! -r $config_file) {
|
|
print STDERR "file '$config_file' is not readable or does not exist\n";
|
|
exit 2;
|
|
}
|
|
|
|
if (!open(CONFIG_FILE, "<", "$config_file")) {
|
|
print STDERR "open $config_file failed\n";
|
|
exit 2;
|
|
}
|
|
|
|
my @line;
|
|
|
|
LINE:
|
|
while ($line = <CONFIG_FILE>) {
|
|
chomp($line);
|
|
next LINE if ($line =~ /^\s*#/);
|
|
next LINE if ($line =~ /^\s*$/);
|
|
@line = split /=/, $line;
|
|
$existing_config{@line[0]} = @line[1];
|
|
}
|
|
|
|
close(CONFIG_FILE);
|
|
}
|
|
|
|
|
|
sub cmd_line_err()
|
|
{
|
|
my $msg = shift;
|
|
|
|
print STDERR "\n";
|
|
print STDERR " ERROR processing command line options\n";
|
|
print STDERR " $msg\n" if ($msg ne "");
|
|
print STDERR "\n";
|
|
print STDERR " For help, type '$script_name --help'\n";
|
|
print STDERR "\n";
|
|
}
|
|
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# program entry point
|
|
|
|
Getopt::Long::Configure("no_ignore_case", "bundling");
|
|
|
|
if (!GetOptions(
|
|
"c=s" => \$config_file,
|
|
"config=s" => \$config_file,
|
|
"config-format" => \$config_format,
|
|
"exclude-flag=s" => \@exclude_flag,
|
|
"h" => \$help,
|
|
"help" => \$help,
|
|
"black-list-driver" => \$black_list_driver,
|
|
"white-list-config" => \$white_list_config,
|
|
"white-list-driver" => \$white_list_driver,
|
|
"include-flag=s" => \@include_flag,
|
|
"include-suspect" => \$include_suspect,
|
|
"short-name" => \$short_name,
|
|
"show-lists" => \$show_lists,
|
|
"version" => \$version,
|
|
)) {
|
|
|
|
&cmd_line_err();
|
|
|
|
exit 1;
|
|
}
|
|
|
|
|
|
my $exit_after_messages = 0;
|
|
|
|
if ($version) {
|
|
print STDERR "\n$script_name $VUFX\n\n";
|
|
$exit_after_messages = 1;
|
|
}
|
|
|
|
|
|
if ($help) {
|
|
&usage;
|
|
$exit_after_messages = 1;
|
|
}
|
|
|
|
|
|
if ($show_lists) {
|
|
|
|
print "\n";
|
|
print "These compatibles are hard coded to have no driver.\n";
|
|
print "\n";
|
|
for my $compat (sort keys %compat_white_list) {
|
|
print " $compat\n";
|
|
}
|
|
|
|
|
|
print "\n\n";
|
|
print "The driver for these compatibles is hard coded (white list).\n";
|
|
print "\n";
|
|
my $max_compat_len = 0;
|
|
for my $compat (sort keys %driver_hard_code_list) {
|
|
if (length $compat > $max_compat_len) {
|
|
$max_compat_len = length $compat;
|
|
}
|
|
}
|
|
for my $compat (sort keys %driver_hard_code_list) {
|
|
if (($driver ne "hardcoded_no_driver") && ($driver ne "no_driver")) {
|
|
my $first = 1;
|
|
for my $driver (@{ $driver_hard_code_list{$compat} }) {
|
|
if ($first) {
|
|
print " $compat";
|
|
print " " x ($max_compat_len - length $compat);
|
|
$first = 0;
|
|
} else {
|
|
print " ", " " x $max_compat_len;
|
|
}
|
|
print " $driver\n";
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
print "\n\n";
|
|
print "The configuration option for these drivers is hard coded (white list).\n";
|
|
print "\n";
|
|
my $max_driver_len = 0;
|
|
for my $driver (sort keys %driver_config_hard_code_list) {
|
|
if (length $driver > $max_driver_len) {
|
|
$max_driver_len = length $driver;
|
|
}
|
|
}
|
|
for my $driver (sort keys %driver_config_hard_code_list) {
|
|
if (($driver ne "hardcoded_no_driver") && ($driver ne "no_driver")) {
|
|
my $first = 1;
|
|
for my $config (@{ $driver_config_hard_code_list{$driver} }) {
|
|
if ($first) {
|
|
print " $driver";
|
|
print " " x ($max_driver_len - length $driver);
|
|
$first = 0;
|
|
} else {
|
|
print " ", " " x $max_driver_len;
|
|
}
|
|
print " $config\n";
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
print "\n\n";
|
|
print "These drivers are black listed.\n";
|
|
print "\n";
|
|
for my $driver (@black_list_driver) {
|
|
print " $driver\n";
|
|
}
|
|
|
|
print "\n";
|
|
|
|
$exit_after_messages = 1;
|
|
}
|
|
|
|
|
|
if ($exit_after_messages) {
|
|
exit 0;
|
|
}
|
|
|
|
|
|
$exclude_flag_pattern = "[";
|
|
for my $exclude_flag (@exclude_flag) {
|
|
$exclude_flag_pattern = $exclude_flag_pattern . $exclude_flag;
|
|
}
|
|
$exclude_flag_pattern = $exclude_flag_pattern . "]";
|
|
# clean up if empty
|
|
$exclude_flag_pattern =~ s/^\[\]$//;
|
|
|
|
|
|
$include_flag_pattern = "[";
|
|
for my $include_flag (@include_flag) {
|
|
$include_flag_pattern = $include_flag_pattern . $include_flag;
|
|
}
|
|
$include_flag_pattern = $include_flag_pattern . "]";
|
|
# clean up if empty
|
|
$include_flag_pattern =~ s/^\[\]$//;
|
|
|
|
|
|
if ($exclude_flag_pattern) {
|
|
my $found = 0;
|
|
for $pr_flag_value (@pr_flag_value) {
|
|
if ($exclude_flag_pattern =~ m/$pr_flag_value/) {
|
|
$found = 1;
|
|
}
|
|
}
|
|
if (!$found) {
|
|
&cmd_line_err("invalid value for FLAG in --exclude-flag\n");
|
|
exit 1
|
|
}
|
|
}
|
|
|
|
if ($include_flag_pattern) {
|
|
my $found = 0;
|
|
for $pr_flag_value (@pr_flag_value) {
|
|
if ($include_flag_pattern =~ m/$pr_flag_value/) {
|
|
$found = 1;
|
|
}
|
|
}
|
|
if (!$found) {
|
|
&cmd_line_err("invalid value for FLAG in --include-flag\n");
|
|
exit 1
|
|
}
|
|
}
|
|
|
|
if ($include_suspect) {
|
|
$include_flag_pattern =~ s/\[//;
|
|
$include_flag_pattern =~ s/\]//;
|
|
$include_flag_pattern = "[" . $include_flag_pattern . "A-Z]";
|
|
}
|
|
|
|
if ($exclude_flag_pattern =~ m/$include_flag_pattern/) {
|
|
&cmd_line_err("the same flag appears in both --exclude-flag and --include-flag or --include-suspect\n");
|
|
exit 1
|
|
}
|
|
|
|
|
|
# ($#ARGV < 0) is valid for --help, --version
|
|
if ($#ARGV < 0) {
|
|
&cmd_line_err("device-tree... is required");
|
|
exit 1
|
|
}
|
|
|
|
|
|
if ($config_file) {
|
|
&read_config_file();
|
|
}
|
|
|
|
|
|
# avoid pushing duplicates for this value
|
|
$driver = "hardcoded_no_driver";
|
|
for $config ( @{ $driver_config_hard_code_list{$driver} } ) {
|
|
push @{ $driver_config{$driver} }, $config;
|
|
}
|
|
|
|
if ($white_list_driver) {
|
|
for my $compat (keys %driver_hard_code_list) {
|
|
for my $driver (@{ $driver_hard_code_list{$compat} }) {
|
|
push @{ $compat_driver{$compat} }, $driver;
|
|
if ($driver ne "hardcoded_no_driver") {
|
|
$driver_count{$compat} = scalar @{ $compat_driver{$compat} };
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if ($white_list_config) {
|
|
for my $driver (keys %driver_config_hard_code_list) {
|
|
if ($driver ne "hardcoded_no_driver") {
|
|
for $config ( @{ $driver_config_hard_code_list{$driver} } ) {
|
|
push @{ $driver_config{$driver} }, $config;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (-x "scripts/dtc/dtx_diff") {
|
|
$dtx_diff = "scripts/dtc/dtx_diff";
|
|
} else {
|
|
|
|
print STDERR "\n";
|
|
print STDERR "$script_name must be run from the root directory of a Linux kernel tree\n";
|
|
print STDERR "\n";
|
|
exit 3;
|
|
}
|
|
|
|
for $file (@ARGV) {
|
|
&read_dts($file);
|
|
}
|