Changes in 4.9.331 uas: add no-uas quirk for Hiksemi usb_disk usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS uas: ignore UAS for Thinkplus chips net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455 ntfs: fix BUG_ON in ntfs_lookup_inode_by_name() mmc: moxart: fix 4-bit bus width and remove 8-bit bus width mm: prevent page_frag_alloc() from corrupting the memory Revert "drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time" Input: melfas_mip4 - fix return value check in mip4_probe() usbnet: Fix memory leak in usbnet_disconnect() nvme: add new line after variable declatation nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices selftests: Fix the if conditions of in test_extra_filter() clk: iproc: Minor tidy up of iproc pll data structures clk: iproc: Do not rely on node name for correct PLL setup Makefile.extrawarn: Move -Wcast-function-type-strict to W=1 ARM: fix function graph tracer and unwinder dependencies fs: fix UAF/GPF bug in nilfs_mdt_destroy dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer net/ieee802154: fix uninit value bug in dgram_sendmsg um: Cleanup syscall_handler_t cast in syscalls_32.h um: Cleanup compiler warning in arch/x86/um/tls_32.c usb: mon: make mmapped memory read only USB: serial: ftdi_sio: fix 300 bps rate for SIO nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level() nilfs2: fix leak of nilfs_root in case of writer thread creation failure nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure ceph: don't truncate file in atomic_open random: clamp credited irq bits to maximum mixed ALSA: hda: Fix position reporting on Poulsbo scsi: stex: Properly zero out the passthrough command structure USB: serial: qcserial: add new usb-id for Dell branded EM7455 random: avoid reading two cache lines on irq randomness wifi: mac80211_hwsim: avoid mac80211 warning on bad rate random: restore O_NONBLOCK support Input: xpad - add supported devices as contributed on github Input: xpad - fix wireless 360 controller breaking after suspend random: use expired timer rather than wq for mixing fast pool ALSA: oss: Fix potential deadlock at unregistration ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free() ALSA: usb-audio: Fix potential memory leaks ALSA: usb-audio: Fix NULL dererence at error path iio: dac: ad5593r: Fix i2c read protocol requirements fs: dlm: fix race between test_bit() and queue_work() fs: dlm: handle -EBUSY first in lock arg validation quota: Check next/prev free block number after reading from quota file regulator: qcom_rpm: Fix circular deferral regression parisc: fbdev/stifb: Align graphics memory size to 4MB UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge fbdev: smscufx: Fix use-after-free in ufx_ops_open() nilfs2: fix use-after-free bug of struct nilfs_root ext4: avoid crash when inline data creation follows DIO write ext4: fix null-ptr-deref in ext4_write_info ext4: make ext4_lazyinit_thread freezable ext4: place buffer head allocation before handle start ring-buffer: Allow splice to read previous partially read pages ring-buffer: Check pending waiters when doing wake ups as well ring-buffer: Fix race between reset page and reading page KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility selinux: use "grep -E" instead of "egrep" sh: machvec: Use char[] for section boundaries wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state() wifi: mac80211: allow bw change during channel switch in mesh wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse() spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume() spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime() wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration net: fs_enet: Fix wrong check in do_pd_setup spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe mISDN: fix use-after-free bugs in l1oip timer handlers tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks() bnx2x: fix potential memory leak in bnx2x_tpa_stop() drm/mipi-dsi: Detach devices when removing the host platform/x86: msi-laptop: Fix old-ec check for backlight registering mmc: au1xmmc: Fix an error handling path in au1xmmc_probe() ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API ALSA: dmaengine: increment buffer pointer atomically memory: of: Fix refcount leak bug in of_get_ddr_timings() soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() soc: qcom: smem_state: Add refcounting for the 'state->of_node' ARM: dts: kirkwood: lsxl: fix serial line ARM: dts: kirkwood: lsxl: remove first ethernet port ARM: Drop CMDLINE_* dependency on ATAGS ARM: dts: exynos: fix polarity of VBUS GPIO of Origen iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX iio: inkern: only release the device node when done with it iio: ABI: Fix wrong format of differential capacitance channel ABI. clk: tegra: Fix refcount leak in tegra210_clock_init clk: tegra: Fix refcount leak in tegra114_clock_init clk: tegra20: Fix refcount leak in tegra20_clock_init HSI: omap_ssi: Fix refcount leak in ssi_probe HSI: omap_ssi_port: Fix dma_map_sg error check media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop tty: xilinx_uartps: Fix the ignore_status media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init RDMA/rxe: Fix "kernel NULL pointer dereference" error RDMA/rxe: Fix the error caused by qp->sk dyndbg: fix module.dyndbg handling dyndbg: let query-modname override actual module name ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting() ata: fix ata_id_has_devslp() ata: fix ata_id_has_ncq_autosense() ata: fix ata_id_has_dipm() drivers: serial: jsm: fix some leaks in probe firmware: google: Test spinlock on panic path to avoid lockups serial: 8250: Fix restoring termios speed after suspend mfd: intel_soc_pmic: Fix an error handling path in intel_soc_pmic_i2c_probe() mfd: lp8788: Fix an error handling path in lp8788_probe() mfd: lp8788: Fix an error handling path in lp8788_irq_init() and lp8788_irq_init() mfd: sm501: Add check for platform_driver_register() dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup() clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe powerpc/math_emu/efp: Include module.h powerpc/pci_dn: Add missing of_node_put() powerpc: Fix SPE Power ISA properties for e500v1 platforms iommu/omap: Fix buffer overflow in debugfs f2fs: fix race condition on setting FI_NO_EXTENT flag ACPI: video: Add Toshiba Satellite/Portege Z830 quirk MIPS: BCM47XX: Cast memcmp() of function to (void *) powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash openvswitch: Fix double reporting of drops in dropwatch openvswitch: Fix overreporting of drops in dropwatch tcp: annotate data-race around tcp_md5sig_pool_populated xfrm: Update ipcomp_scratches with NULL when freed Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create() Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times can: bcm: check the result of can_send() in bcm_can_tx() wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620 Bluetooth: L2CAP: Fix user-after-free r8152: Rate limit overflow messages drm: Use size_t type for len variable in drm_copy_field() drm: Prevent drm_copy_field() to attempt copying a NULL pointer platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading drm/amdgpu: fix initial connector audio value ARM: dts: imx7d-sdb: config the max pressure for tsc2046 ARM: dts: imx6q: add missing properties for sram ARM: dts: imx6dl: add missing properties for sram ARM: dts: imx6qp: add missing properties for sram ARM: dts: imx6sl: add missing properties for sram media: cx88: Fix a null-ptr-deref bug in buffer_prepare() scsi: 3w-9xxx: Avoid disabling device if failing to enable it HID: roccat: Fix use-after-free in roccat_read() usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info() usb: musb: Fix musb_gadget.c rxstate overflow bug Revert "usb: storage: Add quirk for Samsung Fit flash" usb: idmouse: fix an uninit-value in idmouse_open perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc net: ieee802154: return -EINVAL for unknown addr type net/ieee802154: don't warn zero-sized raw_sendmsg() ext4: continue to expand file system when the target size doesn't reach inet: fully convert sk->sk_rx_dst to RCU rules thermal: intel_powerclamp: Use first online CPU as control_cpu gcov: support GCC 12.1 and newer compilers Linux 4.9.331 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I105d6215a29d200abe3330f328ce3c2009ba0df9
1144 lines
33 KiB
C
1144 lines
33 KiB
C
|
|
/*
|
|
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
|
|
* Copyright 2003-2004 Jeff Garzik
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware documentation available from http://www.t13.org/
|
|
*
|
|
*/
|
|
|
|
#ifndef __LINUX_ATA_H__
|
|
#define __LINUX_ATA_H__
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/types.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
/* defines only for the constants which don't work well as enums */
|
|
#define ATA_DMA_BOUNDARY 0xffffUL
|
|
#define ATA_DMA_MASK 0xffffffffULL
|
|
|
|
enum {
|
|
/* various global constants */
|
|
ATA_MAX_DEVICES = 2, /* per bus/port */
|
|
ATA_MAX_PRD = 256, /* we could make these 256/256 */
|
|
ATA_SECT_SIZE = 512,
|
|
ATA_MAX_SECTORS_128 = 128,
|
|
ATA_MAX_SECTORS = 256,
|
|
ATA_MAX_SECTORS_1024 = 1024,
|
|
ATA_MAX_SECTORS_LBA48 = 65535,/* avoid count to be 0000h */
|
|
ATA_MAX_SECTORS_TAPE = 65535,
|
|
ATA_MAX_TRIM_RNUM = 64, /* 512-byte payload / (6-byte LBA + 2-byte range per entry) */
|
|
|
|
ATA_ID_WORDS = 256,
|
|
ATA_ID_CONFIG = 0,
|
|
ATA_ID_CYLS = 1,
|
|
ATA_ID_HEADS = 3,
|
|
ATA_ID_SECTORS = 6,
|
|
ATA_ID_SERNO = 10,
|
|
ATA_ID_BUF_SIZE = 21,
|
|
ATA_ID_FW_REV = 23,
|
|
ATA_ID_PROD = 27,
|
|
ATA_ID_MAX_MULTSECT = 47,
|
|
ATA_ID_DWORD_IO = 48,
|
|
ATA_ID_CAPABILITY = 49,
|
|
ATA_ID_OLD_PIO_MODES = 51,
|
|
ATA_ID_OLD_DMA_MODES = 52,
|
|
ATA_ID_FIELD_VALID = 53,
|
|
ATA_ID_CUR_CYLS = 54,
|
|
ATA_ID_CUR_HEADS = 55,
|
|
ATA_ID_CUR_SECTORS = 56,
|
|
ATA_ID_MULTSECT = 59,
|
|
ATA_ID_LBA_CAPACITY = 60,
|
|
ATA_ID_SWDMA_MODES = 62,
|
|
ATA_ID_MWDMA_MODES = 63,
|
|
ATA_ID_PIO_MODES = 64,
|
|
ATA_ID_EIDE_DMA_MIN = 65,
|
|
ATA_ID_EIDE_DMA_TIME = 66,
|
|
ATA_ID_EIDE_PIO = 67,
|
|
ATA_ID_EIDE_PIO_IORDY = 68,
|
|
ATA_ID_ADDITIONAL_SUPP = 69,
|
|
ATA_ID_QUEUE_DEPTH = 75,
|
|
ATA_ID_SATA_CAPABILITY = 76,
|
|
ATA_ID_SATA_CAPABILITY_2 = 77,
|
|
ATA_ID_FEATURE_SUPP = 78,
|
|
ATA_ID_MAJOR_VER = 80,
|
|
ATA_ID_COMMAND_SET_1 = 82,
|
|
ATA_ID_COMMAND_SET_2 = 83,
|
|
ATA_ID_CFSSE = 84,
|
|
ATA_ID_CFS_ENABLE_1 = 85,
|
|
ATA_ID_CFS_ENABLE_2 = 86,
|
|
ATA_ID_CSF_DEFAULT = 87,
|
|
ATA_ID_UDMA_MODES = 88,
|
|
ATA_ID_HW_CONFIG = 93,
|
|
ATA_ID_SPG = 98,
|
|
ATA_ID_LBA_CAPACITY_2 = 100,
|
|
ATA_ID_SECTOR_SIZE = 106,
|
|
ATA_ID_WWN = 108,
|
|
ATA_ID_LOGICAL_SECTOR_SIZE = 117, /* and 118 */
|
|
ATA_ID_COMMAND_SET_3 = 119,
|
|
ATA_ID_COMMAND_SET_4 = 120,
|
|
ATA_ID_LAST_LUN = 126,
|
|
ATA_ID_DLF = 128,
|
|
ATA_ID_CSFO = 129,
|
|
ATA_ID_CFA_POWER = 160,
|
|
ATA_ID_CFA_KEY_MGMT = 162,
|
|
ATA_ID_CFA_MODES = 163,
|
|
ATA_ID_DATA_SET_MGMT = 169,
|
|
ATA_ID_SCT_CMD_XPORT = 206,
|
|
ATA_ID_ROT_SPEED = 217,
|
|
ATA_ID_PIO4 = (1 << 1),
|
|
|
|
ATA_ID_SERNO_LEN = 20,
|
|
ATA_ID_FW_REV_LEN = 8,
|
|
ATA_ID_PROD_LEN = 40,
|
|
ATA_ID_WWN_LEN = 8,
|
|
|
|
ATA_PCI_CTL_OFS = 2,
|
|
|
|
ATA_PIO0 = (1 << 0),
|
|
ATA_PIO1 = ATA_PIO0 | (1 << 1),
|
|
ATA_PIO2 = ATA_PIO1 | (1 << 2),
|
|
ATA_PIO3 = ATA_PIO2 | (1 << 3),
|
|
ATA_PIO4 = ATA_PIO3 | (1 << 4),
|
|
ATA_PIO5 = ATA_PIO4 | (1 << 5),
|
|
ATA_PIO6 = ATA_PIO5 | (1 << 6),
|
|
|
|
ATA_PIO4_ONLY = (1 << 4),
|
|
|
|
ATA_SWDMA0 = (1 << 0),
|
|
ATA_SWDMA1 = ATA_SWDMA0 | (1 << 1),
|
|
ATA_SWDMA2 = ATA_SWDMA1 | (1 << 2),
|
|
|
|
ATA_SWDMA2_ONLY = (1 << 2),
|
|
|
|
ATA_MWDMA0 = (1 << 0),
|
|
ATA_MWDMA1 = ATA_MWDMA0 | (1 << 1),
|
|
ATA_MWDMA2 = ATA_MWDMA1 | (1 << 2),
|
|
ATA_MWDMA3 = ATA_MWDMA2 | (1 << 3),
|
|
ATA_MWDMA4 = ATA_MWDMA3 | (1 << 4),
|
|
|
|
ATA_MWDMA12_ONLY = (1 << 1) | (1 << 2),
|
|
ATA_MWDMA2_ONLY = (1 << 2),
|
|
|
|
ATA_UDMA0 = (1 << 0),
|
|
ATA_UDMA1 = ATA_UDMA0 | (1 << 1),
|
|
ATA_UDMA2 = ATA_UDMA1 | (1 << 2),
|
|
ATA_UDMA3 = ATA_UDMA2 | (1 << 3),
|
|
ATA_UDMA4 = ATA_UDMA3 | (1 << 4),
|
|
ATA_UDMA5 = ATA_UDMA4 | (1 << 5),
|
|
ATA_UDMA6 = ATA_UDMA5 | (1 << 6),
|
|
ATA_UDMA7 = ATA_UDMA6 | (1 << 7),
|
|
/* ATA_UDMA7 is just for completeness... doesn't exist (yet?). */
|
|
|
|
ATA_UDMA24_ONLY = (1 << 2) | (1 << 4),
|
|
|
|
ATA_UDMA_MASK_40C = ATA_UDMA2, /* udma0-2 */
|
|
|
|
/* DMA-related */
|
|
ATA_PRD_SZ = 8,
|
|
ATA_PRD_TBL_SZ = (ATA_MAX_PRD * ATA_PRD_SZ),
|
|
ATA_PRD_EOT = (1 << 31), /* end-of-table flag */
|
|
|
|
ATA_DMA_TABLE_OFS = 4,
|
|
ATA_DMA_STATUS = 2,
|
|
ATA_DMA_CMD = 0,
|
|
ATA_DMA_WR = (1 << 3),
|
|
ATA_DMA_START = (1 << 0),
|
|
ATA_DMA_INTR = (1 << 2),
|
|
ATA_DMA_ERR = (1 << 1),
|
|
ATA_DMA_ACTIVE = (1 << 0),
|
|
|
|
/* bits in ATA command block registers */
|
|
ATA_HOB = (1 << 7), /* LBA48 selector */
|
|
ATA_NIEN = (1 << 1), /* disable-irq flag */
|
|
ATA_LBA = (1 << 6), /* LBA28 selector */
|
|
ATA_DEV1 = (1 << 4), /* Select Device 1 (slave) */
|
|
ATA_DEVICE_OBS = (1 << 7) | (1 << 5), /* obs bits in dev reg */
|
|
ATA_DEVCTL_OBS = (1 << 3), /* obsolete bit in devctl reg */
|
|
ATA_BUSY = (1 << 7), /* BSY status bit */
|
|
ATA_DRDY = (1 << 6), /* device ready */
|
|
ATA_DF = (1 << 5), /* device fault */
|
|
ATA_DSC = (1 << 4), /* drive seek complete */
|
|
ATA_DRQ = (1 << 3), /* data request i/o */
|
|
ATA_CORR = (1 << 2), /* corrected data error */
|
|
ATA_SENSE = (1 << 1), /* sense code available */
|
|
ATA_ERR = (1 << 0), /* have an error */
|
|
ATA_SRST = (1 << 2), /* software reset */
|
|
ATA_ICRC = (1 << 7), /* interface CRC error */
|
|
ATA_BBK = ATA_ICRC, /* pre-EIDE: block marked bad */
|
|
ATA_UNC = (1 << 6), /* uncorrectable media error */
|
|
ATA_MC = (1 << 5), /* media changed */
|
|
ATA_IDNF = (1 << 4), /* ID not found */
|
|
ATA_MCR = (1 << 3), /* media change requested */
|
|
ATA_ABORTED = (1 << 2), /* command aborted */
|
|
ATA_TRK0NF = (1 << 1), /* track 0 not found */
|
|
ATA_AMNF = (1 << 0), /* address mark not found */
|
|
ATAPI_LFS = 0xF0, /* last failed sense */
|
|
ATAPI_EOM = ATA_TRK0NF, /* end of media */
|
|
ATAPI_ILI = ATA_AMNF, /* illegal length indication */
|
|
ATAPI_IO = (1 << 1),
|
|
ATAPI_COD = (1 << 0),
|
|
|
|
/* ATA command block registers */
|
|
ATA_REG_DATA = 0x00,
|
|
ATA_REG_ERR = 0x01,
|
|
ATA_REG_NSECT = 0x02,
|
|
ATA_REG_LBAL = 0x03,
|
|
ATA_REG_LBAM = 0x04,
|
|
ATA_REG_LBAH = 0x05,
|
|
ATA_REG_DEVICE = 0x06,
|
|
ATA_REG_STATUS = 0x07,
|
|
|
|
ATA_REG_FEATURE = ATA_REG_ERR, /* and their aliases */
|
|
ATA_REG_CMD = ATA_REG_STATUS,
|
|
ATA_REG_BYTEL = ATA_REG_LBAM,
|
|
ATA_REG_BYTEH = ATA_REG_LBAH,
|
|
ATA_REG_DEVSEL = ATA_REG_DEVICE,
|
|
ATA_REG_IRQ = ATA_REG_NSECT,
|
|
|
|
/* ATA device commands */
|
|
ATA_CMD_DEV_RESET = 0x08, /* ATAPI device reset */
|
|
ATA_CMD_CHK_POWER = 0xE5, /* check power mode */
|
|
ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */
|
|
ATA_CMD_IDLE = 0xE3, /* place in idle power mode */
|
|
ATA_CMD_EDD = 0x90, /* execute device diagnostic */
|
|
ATA_CMD_DOWNLOAD_MICRO = 0x92,
|
|
ATA_CMD_DOWNLOAD_MICRO_DMA = 0x93,
|
|
ATA_CMD_NOP = 0x00,
|
|
ATA_CMD_FLUSH = 0xE7,
|
|
ATA_CMD_FLUSH_EXT = 0xEA,
|
|
ATA_CMD_ID_ATA = 0xEC,
|
|
ATA_CMD_ID_ATAPI = 0xA1,
|
|
ATA_CMD_SERVICE = 0xA2,
|
|
ATA_CMD_READ = 0xC8,
|
|
ATA_CMD_READ_EXT = 0x25,
|
|
ATA_CMD_READ_QUEUED = 0x26,
|
|
ATA_CMD_READ_STREAM_EXT = 0x2B,
|
|
ATA_CMD_READ_STREAM_DMA_EXT = 0x2A,
|
|
ATA_CMD_WRITE = 0xCA,
|
|
ATA_CMD_WRITE_EXT = 0x35,
|
|
ATA_CMD_WRITE_QUEUED = 0x36,
|
|
ATA_CMD_WRITE_STREAM_EXT = 0x3B,
|
|
ATA_CMD_WRITE_STREAM_DMA_EXT = 0x3A,
|
|
ATA_CMD_WRITE_FUA_EXT = 0x3D,
|
|
ATA_CMD_WRITE_QUEUED_FUA_EXT = 0x3E,
|
|
ATA_CMD_FPDMA_READ = 0x60,
|
|
ATA_CMD_FPDMA_WRITE = 0x61,
|
|
ATA_CMD_NCQ_NON_DATA = 0x63,
|
|
ATA_CMD_FPDMA_SEND = 0x64,
|
|
ATA_CMD_FPDMA_RECV = 0x65,
|
|
ATA_CMD_PIO_READ = 0x20,
|
|
ATA_CMD_PIO_READ_EXT = 0x24,
|
|
ATA_CMD_PIO_WRITE = 0x30,
|
|
ATA_CMD_PIO_WRITE_EXT = 0x34,
|
|
ATA_CMD_READ_MULTI = 0xC4,
|
|
ATA_CMD_READ_MULTI_EXT = 0x29,
|
|
ATA_CMD_WRITE_MULTI = 0xC5,
|
|
ATA_CMD_WRITE_MULTI_EXT = 0x39,
|
|
ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE,
|
|
ATA_CMD_SET_FEATURES = 0xEF,
|
|
ATA_CMD_SET_MULTI = 0xC6,
|
|
ATA_CMD_PACKET = 0xA0,
|
|
ATA_CMD_VERIFY = 0x40,
|
|
ATA_CMD_VERIFY_EXT = 0x42,
|
|
ATA_CMD_WRITE_UNCORR_EXT = 0x45,
|
|
ATA_CMD_STANDBYNOW1 = 0xE0,
|
|
ATA_CMD_IDLEIMMEDIATE = 0xE1,
|
|
ATA_CMD_SLEEP = 0xE6,
|
|
ATA_CMD_INIT_DEV_PARAMS = 0x91,
|
|
ATA_CMD_READ_NATIVE_MAX = 0xF8,
|
|
ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
|
|
ATA_CMD_SET_MAX = 0xF9,
|
|
ATA_CMD_SET_MAX_EXT = 0x37,
|
|
ATA_CMD_READ_LOG_EXT = 0x2F,
|
|
ATA_CMD_WRITE_LOG_EXT = 0x3F,
|
|
ATA_CMD_READ_LOG_DMA_EXT = 0x47,
|
|
ATA_CMD_WRITE_LOG_DMA_EXT = 0x57,
|
|
ATA_CMD_TRUSTED_NONDATA = 0x5B,
|
|
ATA_CMD_TRUSTED_RCV = 0x5C,
|
|
ATA_CMD_TRUSTED_RCV_DMA = 0x5D,
|
|
ATA_CMD_TRUSTED_SND = 0x5E,
|
|
ATA_CMD_TRUSTED_SND_DMA = 0x5F,
|
|
ATA_CMD_PMP_READ = 0xE4,
|
|
ATA_CMD_PMP_READ_DMA = 0xE9,
|
|
ATA_CMD_PMP_WRITE = 0xE8,
|
|
ATA_CMD_PMP_WRITE_DMA = 0xEB,
|
|
ATA_CMD_CONF_OVERLAY = 0xB1,
|
|
ATA_CMD_SEC_SET_PASS = 0xF1,
|
|
ATA_CMD_SEC_UNLOCK = 0xF2,
|
|
ATA_CMD_SEC_ERASE_PREP = 0xF3,
|
|
ATA_CMD_SEC_ERASE_UNIT = 0xF4,
|
|
ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
|
|
ATA_CMD_SEC_DISABLE_PASS = 0xF6,
|
|
ATA_CMD_CONFIG_STREAM = 0x51,
|
|
ATA_CMD_SMART = 0xB0,
|
|
ATA_CMD_MEDIA_LOCK = 0xDE,
|
|
ATA_CMD_MEDIA_UNLOCK = 0xDF,
|
|
ATA_CMD_DSM = 0x06,
|
|
ATA_CMD_CHK_MED_CRD_TYP = 0xD1,
|
|
ATA_CMD_CFA_REQ_EXT_ERR = 0x03,
|
|
ATA_CMD_CFA_WRITE_NE = 0x38,
|
|
ATA_CMD_CFA_TRANS_SECT = 0x87,
|
|
ATA_CMD_CFA_ERASE = 0xC0,
|
|
ATA_CMD_CFA_WRITE_MULT_NE = 0xCD,
|
|
ATA_CMD_REQ_SENSE_DATA = 0x0B,
|
|
ATA_CMD_SANITIZE_DEVICE = 0xB4,
|
|
ATA_CMD_ZAC_MGMT_IN = 0x4A,
|
|
ATA_CMD_ZAC_MGMT_OUT = 0x9F,
|
|
|
|
/* marked obsolete in the ATA/ATAPI-7 spec */
|
|
ATA_CMD_RESTORE = 0x10,
|
|
|
|
/* Subcmds for ATA_CMD_FPDMA_RECV */
|
|
ATA_SUBCMD_FPDMA_RECV_RD_LOG_DMA_EXT = 0x01,
|
|
ATA_SUBCMD_FPDMA_RECV_ZAC_MGMT_IN = 0x02,
|
|
|
|
/* Subcmds for ATA_CMD_FPDMA_SEND */
|
|
ATA_SUBCMD_FPDMA_SEND_DSM = 0x00,
|
|
ATA_SUBCMD_FPDMA_SEND_WR_LOG_DMA_EXT = 0x02,
|
|
|
|
/* Subcmds for ATA_CMD_NCQ_NON_DATA */
|
|
ATA_SUBCMD_NCQ_NON_DATA_ABORT_QUEUE = 0x00,
|
|
ATA_SUBCMD_NCQ_NON_DATA_SET_FEATURES = 0x05,
|
|
ATA_SUBCMD_NCQ_NON_DATA_ZERO_EXT = 0x06,
|
|
ATA_SUBCMD_NCQ_NON_DATA_ZAC_MGMT_OUT = 0x07,
|
|
|
|
/* Subcmds for ATA_CMD_ZAC_MGMT_IN */
|
|
ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES = 0x00,
|
|
|
|
/* Subcmds for ATA_CMD_ZAC_MGMT_OUT */
|
|
ATA_SUBCMD_ZAC_MGMT_OUT_CLOSE_ZONE = 0x01,
|
|
ATA_SUBCMD_ZAC_MGMT_OUT_FINISH_ZONE = 0x02,
|
|
ATA_SUBCMD_ZAC_MGMT_OUT_OPEN_ZONE = 0x03,
|
|
ATA_SUBCMD_ZAC_MGMT_OUT_RESET_WRITE_POINTER = 0x04,
|
|
|
|
/* READ_LOG_EXT pages */
|
|
ATA_LOG_DIRECTORY = 0x0,
|
|
ATA_LOG_SATA_NCQ = 0x10,
|
|
ATA_LOG_NCQ_NON_DATA = 0x12,
|
|
ATA_LOG_NCQ_SEND_RECV = 0x13,
|
|
ATA_LOG_SATA_ID_DEV_DATA = 0x30,
|
|
ATA_LOG_SATA_SETTINGS = 0x08,
|
|
ATA_LOG_ZONED_INFORMATION = 0x09,
|
|
ATA_LOG_DEVSLP_OFFSET = 0x30,
|
|
ATA_LOG_DEVSLP_SIZE = 0x08,
|
|
ATA_LOG_DEVSLP_MDAT = 0x00,
|
|
ATA_LOG_DEVSLP_MDAT_MASK = 0x1F,
|
|
ATA_LOG_DEVSLP_DETO = 0x01,
|
|
ATA_LOG_DEVSLP_VALID = 0x07,
|
|
ATA_LOG_DEVSLP_VALID_MASK = 0x80,
|
|
|
|
/* NCQ send and receive log */
|
|
ATA_LOG_NCQ_SEND_RECV_SUBCMDS_OFFSET = 0x00,
|
|
ATA_LOG_NCQ_SEND_RECV_SUBCMDS_DSM = (1 << 0),
|
|
ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET = 0x04,
|
|
ATA_LOG_NCQ_SEND_RECV_DSM_TRIM = (1 << 0),
|
|
ATA_LOG_NCQ_SEND_RECV_RD_LOG_OFFSET = 0x08,
|
|
ATA_LOG_NCQ_SEND_RECV_RD_LOG_SUPPORTED = (1 << 0),
|
|
ATA_LOG_NCQ_SEND_RECV_WR_LOG_OFFSET = 0x0C,
|
|
ATA_LOG_NCQ_SEND_RECV_WR_LOG_SUPPORTED = (1 << 0),
|
|
ATA_LOG_NCQ_SEND_RECV_ZAC_MGMT_OFFSET = 0x10,
|
|
ATA_LOG_NCQ_SEND_RECV_ZAC_MGMT_OUT_SUPPORTED = (1 << 0),
|
|
ATA_LOG_NCQ_SEND_RECV_ZAC_MGMT_IN_SUPPORTED = (1 << 1),
|
|
ATA_LOG_NCQ_SEND_RECV_SIZE = 0x14,
|
|
|
|
/* NCQ Non-Data log */
|
|
ATA_LOG_NCQ_NON_DATA_SUBCMDS_OFFSET = 0x00,
|
|
ATA_LOG_NCQ_NON_DATA_ABORT_OFFSET = 0x00,
|
|
ATA_LOG_NCQ_NON_DATA_ABORT_NCQ = (1 << 0),
|
|
ATA_LOG_NCQ_NON_DATA_ABORT_ALL = (1 << 1),
|
|
ATA_LOG_NCQ_NON_DATA_ABORT_STREAMING = (1 << 2),
|
|
ATA_LOG_NCQ_NON_DATA_ABORT_NON_STREAMING = (1 << 3),
|
|
ATA_LOG_NCQ_NON_DATA_ABORT_SELECTED = (1 << 4),
|
|
ATA_LOG_NCQ_NON_DATA_ZAC_MGMT_OFFSET = 0x1C,
|
|
ATA_LOG_NCQ_NON_DATA_ZAC_MGMT_OUT = (1 << 0),
|
|
ATA_LOG_NCQ_NON_DATA_SIZE = 0x40,
|
|
|
|
/* READ/WRITE LONG (obsolete) */
|
|
ATA_CMD_READ_LONG = 0x22,
|
|
ATA_CMD_READ_LONG_ONCE = 0x23,
|
|
ATA_CMD_WRITE_LONG = 0x32,
|
|
ATA_CMD_WRITE_LONG_ONCE = 0x33,
|
|
|
|
/* SETFEATURES stuff */
|
|
SETFEATURES_XFER = 0x03,
|
|
XFER_UDMA_7 = 0x47,
|
|
XFER_UDMA_6 = 0x46,
|
|
XFER_UDMA_5 = 0x45,
|
|
XFER_UDMA_4 = 0x44,
|
|
XFER_UDMA_3 = 0x43,
|
|
XFER_UDMA_2 = 0x42,
|
|
XFER_UDMA_1 = 0x41,
|
|
XFER_UDMA_0 = 0x40,
|
|
XFER_MW_DMA_4 = 0x24, /* CFA only */
|
|
XFER_MW_DMA_3 = 0x23, /* CFA only */
|
|
XFER_MW_DMA_2 = 0x22,
|
|
XFER_MW_DMA_1 = 0x21,
|
|
XFER_MW_DMA_0 = 0x20,
|
|
XFER_SW_DMA_2 = 0x12,
|
|
XFER_SW_DMA_1 = 0x11,
|
|
XFER_SW_DMA_0 = 0x10,
|
|
XFER_PIO_6 = 0x0E, /* CFA only */
|
|
XFER_PIO_5 = 0x0D, /* CFA only */
|
|
XFER_PIO_4 = 0x0C,
|
|
XFER_PIO_3 = 0x0B,
|
|
XFER_PIO_2 = 0x0A,
|
|
XFER_PIO_1 = 0x09,
|
|
XFER_PIO_0 = 0x08,
|
|
XFER_PIO_SLOW = 0x00,
|
|
|
|
SETFEATURES_WC_ON = 0x02, /* Enable write cache */
|
|
SETFEATURES_WC_OFF = 0x82, /* Disable write cache */
|
|
|
|
SETFEATURES_RA_ON = 0xaa, /* Enable read look-ahead */
|
|
SETFEATURES_RA_OFF = 0x55, /* Disable read look-ahead */
|
|
|
|
/* Enable/Disable Automatic Acoustic Management */
|
|
SETFEATURES_AAM_ON = 0x42,
|
|
SETFEATURES_AAM_OFF = 0xC2,
|
|
|
|
SETFEATURES_SPINUP = 0x07, /* Spin-up drive */
|
|
SETFEATURES_SPINUP_TIMEOUT = 30000, /* 30s timeout for drive spin-up from PUIS */
|
|
|
|
SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
|
|
SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
|
|
|
|
/* SETFEATURE Sector counts for SATA features */
|
|
SATA_FPDMA_OFFSET = 0x01, /* FPDMA non-zero buffer offsets */
|
|
SATA_FPDMA_AA = 0x02, /* FPDMA Setup FIS Auto-Activate */
|
|
SATA_DIPM = 0x03, /* Device Initiated Power Management */
|
|
SATA_FPDMA_IN_ORDER = 0x04, /* FPDMA in-order data delivery */
|
|
SATA_AN = 0x05, /* Asynchronous Notification */
|
|
SATA_SSP = 0x06, /* Software Settings Preservation */
|
|
SATA_DEVSLP = 0x09, /* Device Sleep */
|
|
|
|
SETFEATURE_SENSE_DATA = 0xC3, /* Sense Data Reporting feature */
|
|
|
|
/* feature values for SET_MAX */
|
|
ATA_SET_MAX_ADDR = 0x00,
|
|
ATA_SET_MAX_PASSWD = 0x01,
|
|
ATA_SET_MAX_LOCK = 0x02,
|
|
ATA_SET_MAX_UNLOCK = 0x03,
|
|
ATA_SET_MAX_FREEZE_LOCK = 0x04,
|
|
|
|
/* feature values for DEVICE CONFIGURATION OVERLAY */
|
|
ATA_DCO_RESTORE = 0xC0,
|
|
ATA_DCO_FREEZE_LOCK = 0xC1,
|
|
ATA_DCO_IDENTIFY = 0xC2,
|
|
ATA_DCO_SET = 0xC3,
|
|
|
|
/* feature values for SMART */
|
|
ATA_SMART_ENABLE = 0xD8,
|
|
ATA_SMART_READ_VALUES = 0xD0,
|
|
ATA_SMART_READ_THRESHOLDS = 0xD1,
|
|
|
|
/* feature values for Data Set Management */
|
|
ATA_DSM_TRIM = 0x01,
|
|
|
|
/* password used in LBA Mid / LBA High for executing SMART commands */
|
|
ATA_SMART_LBAM_PASS = 0x4F,
|
|
ATA_SMART_LBAH_PASS = 0xC2,
|
|
|
|
/* ATAPI stuff */
|
|
ATAPI_PKT_DMA = (1 << 0),
|
|
ATAPI_DMADIR = (1 << 2), /* ATAPI data dir:
|
|
0=to device, 1=to host */
|
|
ATAPI_CDB_LEN = 16,
|
|
|
|
/* PMP stuff */
|
|
SATA_PMP_MAX_PORTS = 15,
|
|
SATA_PMP_CTRL_PORT = 15,
|
|
|
|
SATA_PMP_GSCR_DWORDS = 128,
|
|
SATA_PMP_GSCR_PROD_ID = 0,
|
|
SATA_PMP_GSCR_REV = 1,
|
|
SATA_PMP_GSCR_PORT_INFO = 2,
|
|
SATA_PMP_GSCR_ERROR = 32,
|
|
SATA_PMP_GSCR_ERROR_EN = 33,
|
|
SATA_PMP_GSCR_FEAT = 64,
|
|
SATA_PMP_GSCR_FEAT_EN = 96,
|
|
|
|
SATA_PMP_PSCR_STATUS = 0,
|
|
SATA_PMP_PSCR_ERROR = 1,
|
|
SATA_PMP_PSCR_CONTROL = 2,
|
|
|
|
SATA_PMP_FEAT_BIST = (1 << 0),
|
|
SATA_PMP_FEAT_PMREQ = (1 << 1),
|
|
SATA_PMP_FEAT_DYNSSC = (1 << 2),
|
|
SATA_PMP_FEAT_NOTIFY = (1 << 3),
|
|
|
|
/* cable types */
|
|
ATA_CBL_NONE = 0,
|
|
ATA_CBL_PATA40 = 1,
|
|
ATA_CBL_PATA80 = 2,
|
|
ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */
|
|
ATA_CBL_PATA_UNK = 4, /* don't know, maybe 80c? */
|
|
ATA_CBL_PATA_IGN = 5, /* don't know, ignore cable handling */
|
|
ATA_CBL_SATA = 6,
|
|
|
|
/* SATA Status and Control Registers */
|
|
SCR_STATUS = 0,
|
|
SCR_ERROR = 1,
|
|
SCR_CONTROL = 2,
|
|
SCR_ACTIVE = 3,
|
|
SCR_NOTIFICATION = 4,
|
|
|
|
/* SError bits */
|
|
SERR_DATA_RECOVERED = (1 << 0), /* recovered data error */
|
|
SERR_COMM_RECOVERED = (1 << 1), /* recovered comm failure */
|
|
SERR_DATA = (1 << 8), /* unrecovered data error */
|
|
SERR_PERSISTENT = (1 << 9), /* persistent data/comm error */
|
|
SERR_PROTOCOL = (1 << 10), /* protocol violation */
|
|
SERR_INTERNAL = (1 << 11), /* host internal error */
|
|
SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */
|
|
SERR_PHY_INT_ERR = (1 << 17), /* PHY internal error */
|
|
SERR_COMM_WAKE = (1 << 18), /* Comm wake */
|
|
SERR_10B_8B_ERR = (1 << 19), /* 10b to 8b decode error */
|
|
SERR_DISPARITY = (1 << 20), /* Disparity */
|
|
SERR_CRC = (1 << 21), /* CRC error */
|
|
SERR_HANDSHAKE = (1 << 22), /* Handshake error */
|
|
SERR_LINK_SEQ_ERR = (1 << 23), /* Link sequence error */
|
|
SERR_TRANS_ST_ERROR = (1 << 24), /* Transport state trans. error */
|
|
SERR_UNRECOG_FIS = (1 << 25), /* Unrecognized FIS */
|
|
SERR_DEV_XCHG = (1 << 26), /* device exchanged */
|
|
};
|
|
|
|
enum ata_prot_flags {
|
|
/* protocol flags */
|
|
ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */
|
|
ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */
|
|
ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */
|
|
ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */
|
|
|
|
/* taskfile protocols */
|
|
ATA_PROT_UNKNOWN = (u8)-1,
|
|
ATA_PROT_NODATA = 0,
|
|
ATA_PROT_PIO = ATA_PROT_FLAG_PIO,
|
|
ATA_PROT_DMA = ATA_PROT_FLAG_DMA,
|
|
ATA_PROT_NCQ_NODATA = ATA_PROT_FLAG_NCQ,
|
|
ATA_PROT_NCQ = ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ,
|
|
ATAPI_PROT_NODATA = ATA_PROT_FLAG_ATAPI,
|
|
ATAPI_PROT_PIO = ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO,
|
|
ATAPI_PROT_DMA = ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA,
|
|
};
|
|
|
|
enum ata_ioctls {
|
|
ATA_IOC_GET_IO32 = 0x309, /* HDIO_GET_32BIT */
|
|
ATA_IOC_SET_IO32 = 0x324, /* HDIO_SET_32BIT */
|
|
};
|
|
|
|
/* core structures */
|
|
|
|
struct ata_bmdma_prd {
|
|
__le32 addr;
|
|
__le32 flags_len;
|
|
};
|
|
|
|
/*
|
|
* id tests
|
|
*/
|
|
#define ata_id_is_ata(id) (((id)[ATA_ID_CONFIG] & (1 << 15)) == 0)
|
|
#define ata_id_has_lba(id) ((id)[ATA_ID_CAPABILITY] & (1 << 9))
|
|
#define ata_id_has_dma(id) ((id)[ATA_ID_CAPABILITY] & (1 << 8))
|
|
#define ata_id_has_ncq(id) ((id)[ATA_ID_SATA_CAPABILITY] & (1 << 8))
|
|
#define ata_id_queue_depth(id) (((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
|
|
#define ata_id_removable(id) ((id)[ATA_ID_CONFIG] & (1 << 7))
|
|
#define ata_id_has_atapi_AN(id) \
|
|
((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \
|
|
((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \
|
|
((id)[ATA_ID_FEATURE_SUPP] & (1 << 5)))
|
|
#define ata_id_has_fpdma_aa(id) \
|
|
((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \
|
|
((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \
|
|
((id)[ATA_ID_FEATURE_SUPP] & (1 << 2)))
|
|
#define ata_id_has_devslp(id) \
|
|
((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \
|
|
((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \
|
|
((id)[ATA_ID_FEATURE_SUPP] & (1 << 8)))
|
|
#define ata_id_has_ncq_autosense(id) \
|
|
((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \
|
|
((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \
|
|
((id)[ATA_ID_FEATURE_SUPP] & (1 << 7)))
|
|
#define ata_id_has_dipm(id) \
|
|
((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \
|
|
((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \
|
|
((id)[ATA_ID_FEATURE_SUPP] & (1 << 3)))
|
|
#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
|
|
#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
|
|
#define ata_id_u32(id,n) \
|
|
(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
|
|
#define ata_id_u64(id,n) \
|
|
( ((u64) (id)[(n) + 3] << 48) | \
|
|
((u64) (id)[(n) + 2] << 32) | \
|
|
((u64) (id)[(n) + 1] << 16) | \
|
|
((u64) (id)[(n) + 0]) )
|
|
|
|
#define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
|
|
#define ata_id_has_da(id) ((id)[ATA_ID_SATA_CAPABILITY_2] & (1 << 4))
|
|
|
|
static inline bool ata_id_has_hipm(const u16 *id)
|
|
{
|
|
u16 val = id[ATA_ID_SATA_CAPABILITY];
|
|
|
|
if (val == 0 || val == 0xffff)
|
|
return false;
|
|
|
|
return val & (1 << 9);
|
|
}
|
|
|
|
static inline bool ata_id_has_fua(const u16 *id)
|
|
{
|
|
if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000)
|
|
return false;
|
|
return id[ATA_ID_CFSSE] & (1 << 6);
|
|
}
|
|
|
|
static inline bool ata_id_has_flush(const u16 *id)
|
|
{
|
|
if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
|
|
return false;
|
|
return id[ATA_ID_COMMAND_SET_2] & (1 << 12);
|
|
}
|
|
|
|
static inline bool ata_id_flush_enabled(const u16 *id)
|
|
{
|
|
if (ata_id_has_flush(id) == 0)
|
|
return false;
|
|
if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
|
|
return false;
|
|
return id[ATA_ID_CFS_ENABLE_2] & (1 << 12);
|
|
}
|
|
|
|
static inline bool ata_id_has_flush_ext(const u16 *id)
|
|
{
|
|
if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
|
|
return false;
|
|
return id[ATA_ID_COMMAND_SET_2] & (1 << 13);
|
|
}
|
|
|
|
static inline bool ata_id_flush_ext_enabled(const u16 *id)
|
|
{
|
|
if (ata_id_has_flush_ext(id) == 0)
|
|
return false;
|
|
if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
|
|
return false;
|
|
/*
|
|
* some Maxtor disks have bit 13 defined incorrectly
|
|
* so check bit 10 too
|
|
*/
|
|
return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400;
|
|
}
|
|
|
|
static inline u32 ata_id_logical_sector_size(const u16 *id)
|
|
{
|
|
/* T13/1699-D Revision 6a, Sep 6, 2008. Page 128.
|
|
* IDENTIFY DEVICE data, word 117-118.
|
|
* 0xd000 ignores bit 13 (logical:physical > 1)
|
|
*/
|
|
if ((id[ATA_ID_SECTOR_SIZE] & 0xd000) == 0x5000)
|
|
return (((id[ATA_ID_LOGICAL_SECTOR_SIZE+1] << 16)
|
|
+ id[ATA_ID_LOGICAL_SECTOR_SIZE]) * sizeof(u16)) ;
|
|
return ATA_SECT_SIZE;
|
|
}
|
|
|
|
static inline u8 ata_id_log2_per_physical_sector(const u16 *id)
|
|
{
|
|
/* T13/1699-D Revision 6a, Sep 6, 2008. Page 128.
|
|
* IDENTIFY DEVICE data, word 106.
|
|
* 0xe000 ignores bit 12 (logical sector > 512 bytes)
|
|
*/
|
|
if ((id[ATA_ID_SECTOR_SIZE] & 0xe000) == 0x6000)
|
|
return (id[ATA_ID_SECTOR_SIZE] & 0xf);
|
|
return 0;
|
|
}
|
|
|
|
/* Offset of logical sectors relative to physical sectors.
|
|
*
|
|
* If device has more than one logical sector per physical sector
|
|
* (aka 512 byte emulation), vendors might offset the "sector 0" address
|
|
* so sector 63 is "naturally aligned" - e.g. FAT partition table.
|
|
* This avoids Read/Mod/Write penalties when using FAT partition table
|
|
* and updating "well aligned" (FS perspective) physical sectors on every
|
|
* transaction.
|
|
*/
|
|
static inline u16 ata_id_logical_sector_offset(const u16 *id,
|
|
u8 log2_per_phys)
|
|
{
|
|
u16 word_209 = id[209];
|
|
|
|
if ((log2_per_phys > 1) && (word_209 & 0xc000) == 0x4000) {
|
|
u16 first = word_209 & 0x3fff;
|
|
if (first > 0)
|
|
return (1 << log2_per_phys) - first;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline bool ata_id_has_lba48(const u16 *id)
|
|
{
|
|
if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
|
|
return false;
|
|
if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2))
|
|
return false;
|
|
return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
|
|
}
|
|
|
|
static inline bool ata_id_lba48_enabled(const u16 *id)
|
|
{
|
|
if (ata_id_has_lba48(id) == 0)
|
|
return false;
|
|
if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
|
|
return false;
|
|
return id[ATA_ID_CFS_ENABLE_2] & (1 << 10);
|
|
}
|
|
|
|
static inline bool ata_id_hpa_enabled(const u16 *id)
|
|
{
|
|
/* Yes children, word 83 valid bits cover word 82 data */
|
|
if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
|
|
return false;
|
|
/* And 87 covers 85-87 */
|
|
if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
|
|
return false;
|
|
/* Check command sets enabled as well as supported */
|
|
if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0)
|
|
return false;
|
|
return id[ATA_ID_COMMAND_SET_1] & (1 << 10);
|
|
}
|
|
|
|
static inline bool ata_id_has_wcache(const u16 *id)
|
|
{
|
|
/* Yes children, word 83 valid bits cover word 82 data */
|
|
if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
|
|
return false;
|
|
return id[ATA_ID_COMMAND_SET_1] & (1 << 5);
|
|
}
|
|
|
|
static inline bool ata_id_has_pm(const u16 *id)
|
|
{
|
|
if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
|
|
return false;
|
|
return id[ATA_ID_COMMAND_SET_1] & (1 << 3);
|
|
}
|
|
|
|
static inline bool ata_id_rahead_enabled(const u16 *id)
|
|
{
|
|
if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
|
|
return false;
|
|
return id[ATA_ID_CFS_ENABLE_1] & (1 << 6);
|
|
}
|
|
|
|
static inline bool ata_id_wcache_enabled(const u16 *id)
|
|
{
|
|
if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
|
|
return false;
|
|
return id[ATA_ID_CFS_ENABLE_1] & (1 << 5);
|
|
}
|
|
|
|
static inline bool ata_id_has_read_log_dma_ext(const u16 *id)
|
|
{
|
|
/* Word 86 must have bit 15 set */
|
|
if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
|
|
return false;
|
|
|
|
/* READ LOG DMA EXT support can be signaled either from word 119
|
|
* or from word 120. The format is the same for both words: Bit
|
|
* 15 must be cleared, bit 14 set and bit 3 set.
|
|
*/
|
|
if ((id[ATA_ID_COMMAND_SET_3] & 0xC008) == 0x4008 ||
|
|
(id[ATA_ID_COMMAND_SET_4] & 0xC008) == 0x4008)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static inline bool ata_id_has_sense_reporting(const u16 *id)
|
|
{
|
|
if (!(id[ATA_ID_CFS_ENABLE_2] & BIT(15)))
|
|
return false;
|
|
if ((id[ATA_ID_COMMAND_SET_3] & (BIT(15) | BIT(14))) != BIT(14))
|
|
return false;
|
|
return id[ATA_ID_COMMAND_SET_3] & BIT(6);
|
|
}
|
|
|
|
static inline bool ata_id_sense_reporting_enabled(const u16 *id)
|
|
{
|
|
if (!ata_id_has_sense_reporting(id))
|
|
return false;
|
|
/* ata_id_has_sense_reporting() == true, word 86 must have bit 15 set */
|
|
if ((id[ATA_ID_COMMAND_SET_4] & (BIT(15) | BIT(14))) != BIT(14))
|
|
return false;
|
|
return id[ATA_ID_COMMAND_SET_4] & BIT(6);
|
|
}
|
|
|
|
/**
|
|
*
|
|
* Word: 206 - SCT Command Transport
|
|
* 15:12 - Vendor Specific
|
|
* 11:6 - Reserved
|
|
* 5 - SCT Command Transport Data Tables supported
|
|
* 4 - SCT Command Transport Features Control supported
|
|
* 3 - SCT Command Transport Error Recovery Control supported
|
|
* 2 - SCT Command Transport Write Same supported
|
|
* 1 - SCT Command Transport Long Sector Access supported
|
|
* 0 - SCT Command Transport supported
|
|
*/
|
|
static inline bool ata_id_sct_data_tables(const u16 *id)
|
|
{
|
|
return id[ATA_ID_SCT_CMD_XPORT] & (1 << 5) ? true : false;
|
|
}
|
|
|
|
static inline bool ata_id_sct_features_ctrl(const u16 *id)
|
|
{
|
|
return id[ATA_ID_SCT_CMD_XPORT] & (1 << 4) ? true : false;
|
|
}
|
|
|
|
static inline bool ata_id_sct_error_recovery_ctrl(const u16 *id)
|
|
{
|
|
return id[ATA_ID_SCT_CMD_XPORT] & (1 << 3) ? true : false;
|
|
}
|
|
|
|
static inline bool ata_id_sct_write_same(const u16 *id)
|
|
{
|
|
return id[ATA_ID_SCT_CMD_XPORT] & (1 << 2) ? true : false;
|
|
}
|
|
|
|
static inline bool ata_id_sct_long_sector_access(const u16 *id)
|
|
{
|
|
return id[ATA_ID_SCT_CMD_XPORT] & (1 << 1) ? true : false;
|
|
}
|
|
|
|
static inline bool ata_id_sct_supported(const u16 *id)
|
|
{
|
|
return id[ATA_ID_SCT_CMD_XPORT] & (1 << 0) ? true : false;
|
|
}
|
|
|
|
/**
|
|
* ata_id_major_version - get ATA level of drive
|
|
* @id: Identify data
|
|
*
|
|
* Caveats:
|
|
* ATA-1 considers identify optional
|
|
* ATA-2 introduces mandatory identify
|
|
* ATA-3 introduces word 80 and accurate reporting
|
|
*
|
|
* The practical impact of this is that ata_id_major_version cannot
|
|
* reliably report on drives below ATA3.
|
|
*/
|
|
|
|
static inline unsigned int ata_id_major_version(const u16 *id)
|
|
{
|
|
unsigned int mver;
|
|
|
|
if (id[ATA_ID_MAJOR_VER] == 0xFFFF)
|
|
return 0;
|
|
|
|
for (mver = 14; mver >= 1; mver--)
|
|
if (id[ATA_ID_MAJOR_VER] & (1 << mver))
|
|
break;
|
|
return mver;
|
|
}
|
|
|
|
static inline bool ata_id_is_sata(const u16 *id)
|
|
{
|
|
/*
|
|
* See if word 93 is 0 AND drive is at least ATA-5 compatible
|
|
* verifying that word 80 by casting it to a signed type --
|
|
* this trick allows us to filter out the reserved values of
|
|
* 0x0000 and 0xffff along with the earlier ATA revisions...
|
|
*/
|
|
if (id[ATA_ID_HW_CONFIG] == 0 && (short)id[ATA_ID_MAJOR_VER] >= 0x0020)
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static inline bool ata_id_has_tpm(const u16 *id)
|
|
{
|
|
/* The TPM bits are only valid on ATA8 */
|
|
if (ata_id_major_version(id) < 8)
|
|
return false;
|
|
if ((id[48] & 0xC000) != 0x4000)
|
|
return false;
|
|
return id[48] & (1 << 0);
|
|
}
|
|
|
|
static inline bool ata_id_has_dword_io(const u16 *id)
|
|
{
|
|
/* ATA 8 reuses this flag for "trusted" computing */
|
|
if (ata_id_major_version(id) > 7)
|
|
return false;
|
|
return id[ATA_ID_DWORD_IO] & (1 << 0);
|
|
}
|
|
|
|
static inline bool ata_id_has_unload(const u16 *id)
|
|
{
|
|
if (ata_id_major_version(id) >= 7 &&
|
|
(id[ATA_ID_CFSSE] & 0xC000) == 0x4000 &&
|
|
id[ATA_ID_CFSSE] & (1 << 13))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static inline bool ata_id_has_wwn(const u16 *id)
|
|
{
|
|
return (id[ATA_ID_CSF_DEFAULT] & 0xC100) == 0x4100;
|
|
}
|
|
|
|
static inline int ata_id_form_factor(const u16 *id)
|
|
{
|
|
u16 val = id[168];
|
|
|
|
if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
|
|
return 0;
|
|
|
|
val &= 0xf;
|
|
|
|
if (val > 5)
|
|
return 0;
|
|
|
|
return val;
|
|
}
|
|
|
|
static inline int ata_id_rotation_rate(const u16 *id)
|
|
{
|
|
u16 val = id[217];
|
|
|
|
if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
|
|
return 0;
|
|
|
|
if (val > 1 && val < 0x401)
|
|
return 0;
|
|
|
|
return val;
|
|
}
|
|
|
|
static inline bool ata_id_has_ncq_send_and_recv(const u16 *id)
|
|
{
|
|
return id[ATA_ID_SATA_CAPABILITY_2] & BIT(6);
|
|
}
|
|
|
|
static inline bool ata_id_has_ncq_non_data(const u16 *id)
|
|
{
|
|
return id[ATA_ID_SATA_CAPABILITY_2] & BIT(5);
|
|
}
|
|
|
|
static inline bool ata_id_has_trim(const u16 *id)
|
|
{
|
|
if (ata_id_major_version(id) >= 7 &&
|
|
(id[ATA_ID_DATA_SET_MGMT] & 1))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static inline bool ata_id_has_zero_after_trim(const u16 *id)
|
|
{
|
|
/* DSM supported, deterministic read, and read zero after trim set */
|
|
if (ata_id_has_trim(id) &&
|
|
(id[ATA_ID_ADDITIONAL_SUPP] & 0x4020) == 0x4020)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static inline bool ata_id_current_chs_valid(const u16 *id)
|
|
{
|
|
/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
|
|
has not been issued to the device then the values of
|
|
id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */
|
|
return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */
|
|
id[ATA_ID_CUR_CYLS] && /* cylinders in current translation */
|
|
id[ATA_ID_CUR_HEADS] && /* heads in current translation */
|
|
id[ATA_ID_CUR_HEADS] <= 16 &&
|
|
id[ATA_ID_CUR_SECTORS]; /* sectors in current translation */
|
|
}
|
|
|
|
static inline bool ata_id_is_cfa(const u16 *id)
|
|
{
|
|
if ((id[ATA_ID_CONFIG] == 0x848A) || /* Traditional CF */
|
|
(id[ATA_ID_CONFIG] == 0x844A)) /* Delkin Devices CF */
|
|
return true;
|
|
/*
|
|
* CF specs don't require specific value in the word 0 anymore and yet
|
|
* they forbid to report the ATA version in the word 80 and require the
|
|
* CFA feature set support to be indicated in the word 83 in this case.
|
|
* Unfortunately, some cards only follow either of this requirements,
|
|
* and while those that don't indicate CFA feature support need some
|
|
* sort of quirk list, it seems impractical for the ones that do...
|
|
*/
|
|
return (id[ATA_ID_COMMAND_SET_2] & 0xC004) == 0x4004;
|
|
}
|
|
|
|
static inline bool ata_id_is_ssd(const u16 *id)
|
|
{
|
|
return id[ATA_ID_ROT_SPEED] == 0x01;
|
|
}
|
|
|
|
static inline u8 ata_id_zoned_cap(const u16 *id)
|
|
{
|
|
return (id[ATA_ID_ADDITIONAL_SUPP] & 0x3);
|
|
}
|
|
|
|
static inline bool ata_id_pio_need_iordy(const u16 *id, const u8 pio)
|
|
{
|
|
/* CF spec. r4.1 Table 22 says no IORDY on PIO5 and PIO6. */
|
|
if (pio > 4 && ata_id_is_cfa(id))
|
|
return false;
|
|
/* For PIO3 and higher it is mandatory. */
|
|
if (pio > 2)
|
|
return true;
|
|
/* Turn it on when possible. */
|
|
return ata_id_has_iordy(id);
|
|
}
|
|
|
|
static inline bool ata_drive_40wire(const u16 *dev_id)
|
|
{
|
|
if (ata_id_is_sata(dev_id))
|
|
return false; /* SATA */
|
|
if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000)
|
|
return false; /* 80 wire */
|
|
return true;
|
|
}
|
|
|
|
static inline bool ata_drive_40wire_relaxed(const u16 *dev_id)
|
|
{
|
|
if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000)
|
|
return false; /* 80 wire */
|
|
return true;
|
|
}
|
|
|
|
static inline int atapi_cdb_len(const u16 *dev_id)
|
|
{
|
|
u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3;
|
|
switch (tmp) {
|
|
case 0: return 12;
|
|
case 1: return 16;
|
|
default: return -1;
|
|
}
|
|
}
|
|
|
|
static inline int atapi_command_packet_set(const u16 *dev_id)
|
|
{
|
|
return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f;
|
|
}
|
|
|
|
static inline bool atapi_id_dmadir(const u16 *dev_id)
|
|
{
|
|
return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000);
|
|
}
|
|
|
|
/*
|
|
* ata_id_is_lba_capacity_ok() performs a sanity check on
|
|
* the claimed LBA capacity value for the device.
|
|
*
|
|
* Returns 1 if LBA capacity looks sensible, 0 otherwise.
|
|
*
|
|
* It is called only once for each device.
|
|
*/
|
|
static inline bool ata_id_is_lba_capacity_ok(u16 *id)
|
|
{
|
|
unsigned long lba_sects, chs_sects, head, tail;
|
|
|
|
/* No non-LBA info .. so valid! */
|
|
if (id[ATA_ID_CYLS] == 0)
|
|
return true;
|
|
|
|
lba_sects = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
|
|
|
|
/*
|
|
* The ATA spec tells large drives to return
|
|
* C/H/S = 16383/16/63 independent of their size.
|
|
* Some drives can be jumpered to use 15 heads instead of 16.
|
|
* Some drives can be jumpered to use 4092 cyls instead of 16383.
|
|
*/
|
|
if ((id[ATA_ID_CYLS] == 16383 ||
|
|
(id[ATA_ID_CYLS] == 4092 && id[ATA_ID_CUR_CYLS] == 16383)) &&
|
|
id[ATA_ID_SECTORS] == 63 &&
|
|
(id[ATA_ID_HEADS] == 15 || id[ATA_ID_HEADS] == 16) &&
|
|
(lba_sects >= 16383 * 63 * id[ATA_ID_HEADS]))
|
|
return true;
|
|
|
|
chs_sects = id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * id[ATA_ID_SECTORS];
|
|
|
|
/* perform a rough sanity check on lba_sects: within 10% is OK */
|
|
if (lba_sects - chs_sects < chs_sects/10)
|
|
return true;
|
|
|
|
/* some drives have the word order reversed */
|
|
head = (lba_sects >> 16) & 0xffff;
|
|
tail = lba_sects & 0xffff;
|
|
lba_sects = head | (tail << 16);
|
|
|
|
if (lba_sects - chs_sects < chs_sects/10) {
|
|
*(__le32 *)&id[ATA_ID_LBA_CAPACITY] = __cpu_to_le32(lba_sects);
|
|
return true; /* LBA capacity is (now) good */
|
|
}
|
|
|
|
return false; /* LBA capacity value may be bad */
|
|
}
|
|
|
|
static inline void ata_id_to_hd_driveid(u16 *id)
|
|
{
|
|
#ifdef __BIG_ENDIAN
|
|
/* accessed in struct hd_driveid as 8-bit values */
|
|
id[ATA_ID_MAX_MULTSECT] = __cpu_to_le16(id[ATA_ID_MAX_MULTSECT]);
|
|
id[ATA_ID_CAPABILITY] = __cpu_to_le16(id[ATA_ID_CAPABILITY]);
|
|
id[ATA_ID_OLD_PIO_MODES] = __cpu_to_le16(id[ATA_ID_OLD_PIO_MODES]);
|
|
id[ATA_ID_OLD_DMA_MODES] = __cpu_to_le16(id[ATA_ID_OLD_DMA_MODES]);
|
|
id[ATA_ID_MULTSECT] = __cpu_to_le16(id[ATA_ID_MULTSECT]);
|
|
|
|
/* as 32-bit values */
|
|
*(u32 *)&id[ATA_ID_LBA_CAPACITY] = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
|
|
*(u32 *)&id[ATA_ID_SPG] = ata_id_u32(id, ATA_ID_SPG);
|
|
|
|
/* as 64-bit value */
|
|
*(u64 *)&id[ATA_ID_LBA_CAPACITY_2] =
|
|
ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
|
|
#endif
|
|
}
|
|
|
|
static inline bool ata_ok(u8 status)
|
|
{
|
|
return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))
|
|
== ATA_DRDY);
|
|
}
|
|
|
|
static inline bool lba_28_ok(u64 block, u32 n_block)
|
|
{
|
|
/* check the ending block number: must be LESS THAN 0x0fffffff */
|
|
return ((block + n_block) < ((1 << 28) - 1)) && (n_block <= ATA_MAX_SECTORS);
|
|
}
|
|
|
|
static inline bool lba_48_ok(u64 block, u32 n_block)
|
|
{
|
|
/* check the ending block number */
|
|
return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= ATA_MAX_SECTORS_LBA48);
|
|
}
|
|
|
|
#define sata_pmp_gscr_vendor(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff)
|
|
#define sata_pmp_gscr_devid(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] >> 16)
|
|
#define sata_pmp_gscr_rev(gscr) (((gscr)[SATA_PMP_GSCR_REV] >> 8) & 0xff)
|
|
#define sata_pmp_gscr_ports(gscr) ((gscr)[SATA_PMP_GSCR_PORT_INFO] & 0xf)
|
|
|
|
#endif /* __LINUX_ATA_H__ */
|