1
0
Files
kernel-49/drivers/usb/serial/usb-serial-simple.c
Greg Kroah-Hartman f95d85c34b Merge 4.9.311 into android-4.9-q
Changes in 4.9.311
	USB: serial: pl2303: add IBM device IDs
	USB: serial: simple: add Nokia phone driver
	netdevice: add the case if dev is NULL
	virtio_console: break out of buf poll on remove
	ethernet: sun: Free the coherent when failing in probing
	af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
	block: Add a helper to validate the block size
	virtio-blk: Use blk_validate_block_size() to validate block size
	USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
	coresight: Fix TRCCONFIGR.QE sysfs interface
	iio: inkern: apply consumer scale on IIO_VAL_INT cases
	iio: inkern: make a best effort on offset calculation
	clk: uniphier: Fix fixed-rate initialization
	ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
	SUNRPC: avoid race between mod_timer() and del_timer_sync()
	NFSD: prevent underflow in nfssvc_decode_writeargs()
	can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
	jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
	jffs2: fix memory leak in jffs2_do_mount_fs
	jffs2: fix memory leak in jffs2_scan_medium
	mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
	mempolicy: mbind_range() set_policy() after vma_merge()
	scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
	Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
	ALSA: cs4236: fix an incorrect NULL check on list iterator
	drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()
	video: fbdev: sm712fb: Fix crash in smtcfb_read()
	video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
	ARM: dts: exynos: fix UART3 pins configuration in Exynos5250
	ARM: dts: exynos: add missing HDMI supplies on SMDK5250
	ARM: dts: exynos: add missing HDMI supplies on SMDK5420
	carl9170: fix missing bit-wise or operator for tx_params
	thermal: int340x: Increase bitmap size
	lib/raid6/test: fix multiple definition linking error
	DEC: Limit PMAX memory probing to R3k systems
	media: davinci: vpif: fix unbalanced runtime PM get
	brcmfmac: firmware: Allocate space for default boardrev in nvram
	brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio
	PCI: pciehp: Clear cmd_busy bit in polling mode
	crypto: authenc - Fix sleep in atomic context in decrypt_tail
	crypto: mxs-dcp - Fix scatterlist processing
	spi: tegra114: Add missing IRQ check in tegra_spi_probe
	selftests/x86: Add validity check and allow field splitting
	hwmon: (pmbus) Add mutex to regulator ops
	hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING
	PM: hibernate: fix __setup handler error handling
	PM: suspend: fix return value of __setup handler
	crypto: vmx - add missing dependencies
	crypto: ccp - ccp_dmaengine_unregister release dma channels
	hwmon: (pmbus) Add Vin unit off handling
	clocksource: acpi_pm: fix return value of __setup handler
	sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa
	perf/core: Fix address filter parser for multiple filters
	perf/x86/intel/pt: Fix address filter config for 32-bit kernel
	video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()
	video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()
	ARM: dts: qcom: ipq4019: fix sleep clock
	soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe
	media: usb: go7007: s2250-board: fix leak in probe()
	ASoC: ti: davinci-i2s: Add check for clk_enable()
	ALSA: spi: Add check for clk_enable()
	arm64: dts: ns2: Fix spi-cpol and spi-cpha property
	arm64: dts: broadcom: Fix sata nodename
	printk: fix return value of printk.devkmsg __setup handler
	ASoC: mxs-saif: Handle errors for clk_enable
	ASoC: atmel_ssc_dai: Handle errors for clk_enable
	memory: emif: Add check for setup_interrupts
	memory: emif: check the pointer temp in get_device_details()
	ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction
	ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
	ASoC: wm8350: Handle error for wm8350_register_irq
	ASoC: fsi: Add check for clk_enable
	video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
	ASoC: dmaengine: do not use a NULL prepare_slave_config() callback
	ASoC: mxs: Fix error handling in mxs_sgtl5000_probe
	ASoC: imx-es8328: Fix error return code in imx_es8328_probe()
	mtd: onenand: Check for error irq
	drm/edid: Don't clear formats if using deep color
	ath9k_htc: fix uninit value bugs
	ray_cs: Check ioremap return value
	power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init
	HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports
	iwlwifi: Fix -EIO error code that is never returned
	scsi: pm8001: Fix command initialization in pm80XX_send_read_log()
	scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()
	scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()
	scsi: pm8001: Fix abort all task initialization
	TOMOYO: fix __setup handlers return values
	ext2: correct max file size computing
	drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
	KVM: x86: Fix emulation in writing cr8
	KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()
	i2c: xiic: Make bus names unique
	power: supply: wm8350-power: Handle error for wm8350_register_irq
	power: supply: wm8350-power: Add missing free in free_charger_irq
	powerpc/sysdev: fix incorrect use to determine if list is empty
	mfd: mc13xxx: Add check for mc13xxx_irq_request
	MIPS: RB532: fix return value of __setup handler
	USB: storage: ums-realtek: fix error code in rts51x_read_mem()
	af_netlink: Fix shift out of bounds in group mask calculation
	i2c: mux: demux-pinctrl: do not deactivate a master that is not active
	mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
	mxser: fix xmit_buf leak in activate when LSR == 0xff
	pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()
	iio: adc: Add check for devm_request_threaded_irq
	clk: qcom: clk-rcg2: Update the frac table for pixel clock
	remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
	clk: loongson1: Terminate clk_div_table with sentinel element
	clk: clps711x: Terminate clk_div_table with sentinel element
	clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
	NFS: remove unneeded check in decode_devicenotify_args()
	pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
	pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
	pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
	tty: hvc: fix return value of __setup handler
	kgdboc: fix return value of __setup handler
	kgdbts: fix return value of __setup handler
	jfs: fix divide error in dbNextAG
	netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
	net: phy: broadcom: Fix brcm_fet_config_init()
	qlcnic: dcb: default to returning -EOPNOTSUPP
	net/x25: Fix null-ptr-deref caused by x25_disconnect
	selinux: use correct type for context length
	loop: use sysfs_emit() in the sysfs xxx show()
	Fix incorrect type in assignment of ipv6 port for audit
	irqchip/nvic: Release nvic_base upon failure
	ACPICA: Avoid walking the ACPI Namespace if it is not there
	ACPI/APEI: Limit printable size of BERT table data
	PM: core: keep irq flags in device_pm_check_callbacks()
	spi: tegra20: Use of_device_get_match_data()
	ext4: don't BUG if someone dirty pages without asking ext4 first
	ntfs: add sanity check on allocation size
	video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow
	video: fbdev: w100fb: Reset global state
	video: fbdev: cirrusfb: check pixclock to avoid divide by zero
	video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit
	ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
	ARM: dts: bcm2837: Add the missing L1/L2 cache information
	video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
	video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
	ASoC: soc-core: skip zero num_dai component in searching dai name
	media: cx88-mpeg: clear interrupt status register before streaming video
	ARM: tegra: tamonten: Fix I2C3 pad setting
	ARM: mmp: Fix failure to remove sram device
	video: fbdev: sm712fb: Fix crash in smtcfb_write()
	media: hdpvr: initialize dev->worker at hdpvr_register_videodev
	mmc: host: Return an error when ->enable_sdio_irq() ops is missing
	scsi: qla2xxx: Fix incorrect reporting of task management failure
	KVM: Prevent module exit until all VMs are freed
	ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
	ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
	gfs2: Make sure FITRIM minlen is rounded up to fs block size
	pinctrl: pinconf-generic: Print arguments for bias-pull-*
	ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
	mm/mmap: return 1 from stack_guard_gap __setup() handler
	mm/memcontrol: return 1 from cgroup.memory __setup() handler
	ubi: fastmap: Return error code if memory allocation fails in add_aeb()
	ASoC: topology: Allow TLV control to be either read or write
	ARM: dts: spear1340: Update serial node properties
	ARM: dts: spear13xx: Update SPI dma properties
	openvswitch: Fixed nd target mask field in the flow dump.
	KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated
	rtc: wm8350: Handle error for wm8350_register_irq
	ARM: 9187/1: JIVE: fix return value of __setup handler
	KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
	ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
	ptp: replace snprintf with sysfs_emit
	powerpc: dts: t104xrdb: fix phy type for FMAN 4/5
	scsi: mvsas: Replace snprintf() with sysfs_emit()
	scsi: bfa: Replace snprintf() with sysfs_emit()
	iommu/arm-smmu-v3: fix event handling soft lockup
	dm ioctl: prevent potential spectre v1 gadget
	scsi: pm8001: Fix pm8001_mpi_task_abort_resp()
	scsi: aha152x: Fix aha152x_setup() __setup handler return value
	bnxt_en: Eliminate unintended link toggle during FW reset
	MIPS: fix fortify panic when copying asm exception handlers
	scsi: libfc: Fix use after free in fc_exch_abts_resp()
	usb: dwc3: omap: fix "unbalanced disables for smps10_out1" on omap5evm
	xtensa: fix DTC warning unit_address_format
	Bluetooth: Fix use after free in hci_send_acl
	init/main.c: return 1 from handled __setup() functions
	w1: w1_therm: fixes w1_seq for ds28ea00 sensors
	SUNRPC/call_alloc: async tasks mustn't block waiting for memory
	serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
	virtio_console: eliminate anonymous module_init & module_exit
	jfs: prevent NULL deref in diFree
	mm: fix race between MADV_FREE reclaim and blkdev direct IO read
	scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
	net: stmmac: Fix unset max_speed difference between DT and non-DT platforms
	drm/imx: Fix memory leak in imx_pd_connector_get_modes
	drbd: Fix five use after free bugs in get_initial_state
	mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
	mm/mempolicy: fix mpol_new leak in shared_policy_replace
	x86/pm: Save the MSR validity status at context setup
	x86/speculation: Restore speculation related MSRs during S3 resume
	arm64: patch_text: Fixup last cpu should be master
	tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
	dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"
	mm: don't skip swap entry even if zap_details specified
	arm64: module: remove (NOLOAD) from linker script
	xfrm: policy: match with both mark and mask on user interfaces
	veth: Ensure eth header is in skb's linear part
	net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link
	nfc: nci: add flush_workqueue to prevent uaf
	cifs: potential buffer overflow in handling symlinks
	drm/amdkfd: Check for potential null return of kmalloc_array()
	scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
	net: micrel: fix KS8851_MLL Kconfig
	gpu: ipu-v3: Fix dev_dbg frequency output
	scsi: mvsas: Add PCI ID of RocketRaid 2640
	drivers: net: slip: fix NPD bug in sl_tx_timeout()
	mm, page_alloc: fix build_zonerefs_node()
	mm: kmemleak: take a full lowmem check in kmemleak_*_phys()
	ALSA: pcm: Test for "silence" field in struct "pcm_format_data"
	ARM: davinci: da850-evm: Avoid NULL pointer dereference
	smp: Fix offline cpu check in flush_smp_call_function_queue()
	i2c: pasemi: Wait for write xfers to finish
	gcc-plugins: latent_entropy: use /dev/urandom
	Linux 4.9.311

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ia8f55c5ae2f0eb71b0893d8271a10dfd3c78b3b8
2022-04-25 16:25:23 +03:00

163 lines
4.4 KiB
C

/*
* USB Serial "Simple" driver
*
* Copyright (C) 2001-2006,2008,2013 Greg Kroah-Hartman <greg@kroah.com>
* Copyright (C) 2005 Arthur Huillet (ahuillet@users.sf.net)
* Copyright (C) 2005 Thomas Hergenhahn <thomas.hergenhahn@suse.de>
* Copyright (C) 2009 Outpost Embedded, LLC
* Copyright (C) 2010 Zilogic Systems <code@zilogic.com>
* Copyright (C) 2013 Wei Shuai <cpuwolf@gmail.com>
* Copyright (C) 2013 Linux Foundation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#define DEVICE_N(vendor, IDS, nport) \
static const struct usb_device_id vendor##_id_table[] = { \
IDS(), \
{ }, \
}; \
static struct usb_serial_driver vendor##_device = { \
.driver = { \
.owner = THIS_MODULE, \
.name = #vendor, \
}, \
.id_table = vendor##_id_table, \
.num_ports = nport, \
};
#define DEVICE(vendor, IDS) DEVICE_N(vendor, IDS, 1)
/* Medtronic CareLink USB driver */
#define CARELINK_IDS() \
{ USB_DEVICE(0x0a21, 0x8001) } /* MMT-7305WW */
DEVICE(carelink, CARELINK_IDS);
/* ZIO Motherboard USB driver */
#define ZIO_IDS() \
{ USB_DEVICE(0x1CBE, 0x0103) }
DEVICE(zio, ZIO_IDS);
/* Funsoft Serial USB driver */
#define FUNSOFT_IDS() \
{ USB_DEVICE(0x1404, 0xcddc) }
DEVICE(funsoft, FUNSOFT_IDS);
/* Infineon Flashloader driver */
#define FLASHLOADER_IDS() \
{ USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \
{ USB_DEVICE(0x8087, 0x0716) }, \
{ USB_DEVICE(0x8087, 0x0801) }
DEVICE(flashloader, FLASHLOADER_IDS);
/* Google Serial USB SubClass */
#define GOOGLE_IDS() \
{ USB_VENDOR_AND_INTERFACE_INFO(0x18d1, \
USB_CLASS_VENDOR_SPEC, \
0x50, \
0x01) }
DEVICE(google, GOOGLE_IDS);
/* Libtransistor USB console */
#define LIBTRANSISTOR_IDS() \
{ USB_DEVICE(0x1209, 0x8b00) }
DEVICE(libtransistor, LIBTRANSISTOR_IDS);
/* ViVOpay USB Serial Driver */
#define VIVOPAY_IDS() \
{ USB_DEVICE(0x1d5f, 0x1004) } /* ViVOpay 8800 */
DEVICE(vivopay, VIVOPAY_IDS);
/* Motorola USB Phone driver */
#define MOTO_IDS() \
{ USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ \
{ USB_DEVICE(0x0c44, 0x0022) }, /* unknown Motorola phone */ \
{ USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ \
{ USB_DEVICE(0x22b8, 0x2c84) }, /* Motorola VE240 phone */ \
{ USB_DEVICE(0x22b8, 0x2c64) } /* Motorola V950 phone */
DEVICE(moto_modem, MOTO_IDS);
/* Motorola Tetra driver */
#define MOTOROLA_TETRA_IDS() \
{ USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ \
{ USB_DEVICE(0x0cad, 0x9012) }, /* MTP6550 */ \
{ USB_DEVICE(0x0cad, 0x9013) }, /* MTP3xxx */ \
{ USB_DEVICE(0x0cad, 0x9015) }, /* MTP85xx */ \
{ USB_DEVICE(0x0cad, 0x9016) } /* TPG2200 */
DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
/* Nokia mobile phone driver */
#define NOKIA_IDS() \
{ USB_DEVICE(0x0421, 0x069a) } /* Nokia 130 (RM-1035) */
DEVICE(nokia, NOKIA_IDS);
/* Novatel Wireless GPS driver */
#define NOVATEL_IDS() \
{ USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */
DEVICE_N(novatel_gps, NOVATEL_IDS, 3);
/* HP4x (48/49) Generic Serial driver */
#define HP4X_IDS() \
{ USB_DEVICE(0x03f0, 0x0121) }
DEVICE(hp4x, HP4X_IDS);
/* Suunto ANT+ USB Driver */
#define SUUNTO_IDS() \
{ USB_DEVICE(0x0fcf, 0x1008) }, \
{ USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */
DEVICE(suunto, SUUNTO_IDS);
/* Siemens USB/MPI adapter */
#define SIEMENS_IDS() \
{ USB_DEVICE(0x908, 0x0004) }
DEVICE(siemens_mpi, SIEMENS_IDS);
/* All of the above structures mushed into two lists */
static struct usb_serial_driver * const serial_drivers[] = {
&carelink_device,
&zio_device,
&funsoft_device,
&flashloader_device,
&google_device,
&libtransistor_device,
&vivopay_device,
&moto_modem_device,
&motorola_tetra_device,
&nokia_device,
&novatel_gps_device,
&hp4x_device,
&suunto_device,
&siemens_mpi_device,
NULL
};
static const struct usb_device_id id_table[] = {
CARELINK_IDS(),
ZIO_IDS(),
FUNSOFT_IDS(),
FLASHLOADER_IDS(),
GOOGLE_IDS(),
LIBTRANSISTOR_IDS(),
VIVOPAY_IDS(),
MOTO_IDS(),
MOTOROLA_TETRA_IDS(),
NOKIA_IDS(),
NOVATEL_IDS(),
HP4X_IDS(),
SUUNTO_IDS(),
SIEMENS_IDS(),
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
module_usb_serial_driver(serial_drivers, id_table);
MODULE_LICENSE("GPL");