Changes in 4.9.229 power: supply: bq24257_charger: Replace depends on REGMAP_I2C with select clk: sunxi: Fix incorrect usage of round_down() i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsets iio: pressure: bmp280: Tolerate IRQ before registering clk: qcom: msm8916: Fix the address location of pll->config_reg backlight: lp855x: Ensure regulators are disabled on probe failure ARM: integrator: Add some Kconfig selections ALSA: isa/wavefront: prevent out of bounds write in ioctl scsi: qla2xxx: Fix issue with adapter's stopping state iio: bmp280: fix compensation of humidity i2c: pxa: clear all master action bits in i2c_pxa_stop_message() usblp: poison URBs upon disconnect PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register ps3disk: use the default segment boundary vfio/pci: fix memory leaks in alloc_perm_bits() mfd: wm8994: Fix driver operation if loaded as modules scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event clk: clk-flexgen: fix clock-critical handling powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run nfsd: Fix svc_xprt refcnt leak when setup callback client failed powerpc/crashkernel: Take "mem=" option into account yam: fix possible memory leak in yam_init_driver mksysmap: Fix the mismatch of '.L' symbols in System.map scsi: sr: Fix sr_probe() missing deallocate of device minor scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM ALSA: usb-audio: Improve frames size computation s390/qdio: put thinint indicator after early error tty: hvc: Fix data abort due to race in hvc_open staging: sm750fb: add missing case while setting FB_VISUAL i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output serial: amba-pl011: Make sure we initialize the port.lock spinlock drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish PCI: rcar: Fix incorrect programming of OB windows PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges power: supply: lp8788: Fix an error handling path in 'lp8788_charger_probe()' power: supply: smb347-charger: IRQSTAT_D is volatile scsi: mpt3sas: Fix double free warnings dlm: remove BUG() before panic() clk: ti: composite: fix memory leak tty: n_gsm: Fix SOF skipping tty: n_gsm: Fix waking up upper tty layer when room available powerpc/pseries/ras: Fix FWNMI_VALID off by one powerpc/ps3: Fix kexec shutdown hang vfio-pci: Mask cap zero usb/ohci-platform: Fix a warning when hibernating drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe() tty: n_gsm: Fix bogus i++ in gsm_data_kick clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1 powerpc/64s/pgtable: fix an undefined behaviour PCI/PTM: Inherit Switch Downstream Port PTM settings from Upstream Port IB/cma: Fix ports memory leak in cma_configfs watchdog: da9062: No need to ping manually before setting timeout usb: dwc2: gadget: move gadget resume after the core is in L0 state USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check usb: gadget: fix potential double-free in m66592_probe. usb: gadget: Fix issue with config_ep_by_speed function clk: bcm2835: Fix return type of bcm2835_register_gate net: sunrpc: Fix off-by-one issues in 'rpc_ntop6' NFSv4.1 fix rpc_call_done assignment for BIND_CONN_TO_SESSION extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed openrisc: Fix issue with argument clobbering for clone/fork gfs2: Allow lock_nolock mount to specify jid=X scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()' crypto: omap-sham - add proper load balancing support for multicore lib/zlib: remove outdated and incorrect pre-increment optimization include/linux/bitops.h: avoid clang shift-count-overflow warnings elfnote: mark all .note sections SHF_ALLOC selftests/vm/pkeys: fix alloc_random_pkey() to make it really random selftests/net: in timestamping, strncpy needs to preserve null byte scsi: acornscsi: Fix an error handling path in acornscsi_probe() usb/xhci-plat: Set PM runtime as active on resume usb/ehci-platform: Set PM runtime as active on resume perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events() bcache: fix potential deadlock problem in btree_gc_coalesce block: Fix use-after-free in blkdev_get() libata: Use per port sync for detach drm: encoder_slave: fix refcouting error for modules drm/dp_mst: Reformat drm_dp_check_act_status() a bit drm/qxl: Use correct notify port address when creating cursor ring selinux: fix double free ext4: fix partial cluster initialization when splitting extent drm/dp_mst: Increase ACT retry timeout to 3s x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld block: nr_sects_write(): Disable preemption on seqcount write s390: fix syscall_get_error for compat processes drm/i915: Whitelist context-local timestamp in the gen9 cmdparser crypto: algboss - don't wait during notifier callback kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex powerpc/kprobes: Fixes for kprobe_lookup_name() on BE x86/kprobes: Avoid kretprobe recursion bug kretprobe: Prevent triggering kretprobe from within kprobe_flush_task e1000e: Do not wake up the system via WOL if device wakeup is disabled sched/rt, net: Use CONFIG_PREEMPTION.patch net: core: device_rename: Use rwsem instead of a seqcount media: dvb_frontend: initialize variable s with FE_NONE instead of 0 media: dvb/frontend.h: move out a private internal structure media: dvb/frontend.h: document the uAPI file media: dvb_frontend: get rid of get_property() callback media: stv0288: get rid of set_property boilerplate media: stv6110: get rid of a srate dead code media: friio-fe: get rid of set_property() media: dvb_frontend: get rid of set_property() callback media: dvb_frontend: cleanup dvb_frontend_ioctl_properties() media: dvb_frontend: cleanup ioctl handling logic media: dvb_frontend: get rid of property cache's state media: dvb_frontend: better document the -EPERM condition media: dvb_frontend: fix return values for FE_SET_PROPERTY media: dvb_frontend: dtv_property_process_set() cleanups media: dvb_frontend: be sure to init dvb_frontend_handle_ioctl() return code media: dvb_frontend: Add unlocked_ioctl in dvb_frontend.c media: dvb_frontend: Add compat_ioctl callback media: dvb_frontend: Add commands implementation for compat ioct media: dvb_frontend: fix wrong cast in compat_ioctl media: dvb_frontend: fix return error code mtd: rawnand: Pass a nand_chip object to nand_release() mtd: rawnand: diskonchip: Fix the probe error path mtd: rawnand: sharpsl: Fix the probe error path mtd: rawnand: xway: Fix the probe error path mtd: rawnand: orion: Fix the probe error path mtd: rawnand: socrates: Fix the probe error path mtd: rawnand: plat_nand: Fix the probe error path mtd: rawnand: mtk: Fix the probe error path mtd: rawnand: tmio: Fix the probe error path scsi: scsi_devinfo: handle non-terminated strings l2tp: Allow duplicate session creation with UDP net: sched: export __netdev_watchdog_up() fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()" mld: fix memory leak in ipv6_mc_destroy_dev() net: fix memleak in register_netdevice() net: usb: ax88179_178a: fix packet alignment padding rocker: fix incorrect error handling in dma_rings_init rxrpc: Fix notification call on completion of discarded calls tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezes ip_tunnel: fix use-after-free in ip_tunnel_lookup() tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT ip6_gre: fix use-after-free in ip6gre_tunnel_lookup() tcp: grow window for OOO packets only for SACK flows sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket net: Fix the arp error in some cases net: Do not clear the sock TX queue in sk_set_socket() net: core: reduce recursion limit value USB: ohci-sm501: Add missed iounmap() in remove usb: dwc2: Postponed gadget registration to the udc class driver usb: add USB_QUIRK_DELAY_INIT for Logitech C922 USB: ehci: reopen solution for Synopsys HC bug usb: host: ehci-exynos: Fix error check in exynos_ehci_probe() ALSA: usb-audio: add quirk for Denon DCD-1500RE xhci: Fix incorrect EP_STATE_MASK xhci: Fix enumeration issue when setting max packet size for FS devices. cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip ALSA: usb-audio: uac1: Invalidate ctl on interrupt ALSA: usb-audio: Clean up mixer element list traverse ALSA: usb-audio: Fix OOB access of mixer element list xhci: Poll for U0 after disabling USB2 LPM cifs/smb3: Fix data inconsistent when punch hole cifs/smb3: Fix data inconsistent when zero file range efi/esrt: Fix reference count leak in esre_create_sysfs_entry. RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads() net: qed: fix left elements count calculation net: qed: fix NVMe login fails over VFs net: qed: fix excessive QM ILT lines consumption ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() usb: gadget: udc: Potential Oops in error handling code netfilter: ipset: fix unaligned atomic access sched/core: Fix PI boosting between RT and DEADLINE tasks ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function net: alx: fix race condition in alx_remove s390/ptrace: fix setting syscall number kbuild: improve cc-option to clean up all temporary files blktrace: break out of blktrace setup on concurrent calls ALSA: hda: Add NVIDIA codec IDs 9a & 9d through a0 to patch table ACPI: sysfs: Fix pm_profile_attr type KVM: X86: Fix MSR range of APIC registers in X2APIC mode mm/slab: use memzero_explicit() in kzfree() ocfs2: load global_inode_alloc ocfs2: fix value of OCFS2_INVALID_SLOT ocfs2: fix panic on nfs server over ocfs2 arm64: perf: Report the PC value in REGS_ABI_32 mode tracing: Fix event trigger to accept redundant spaces drm/radeon: fix fb_div check in ni_init_smc_spll_table() sunrpc: fixed rollback in rpc_gssd_dummy_populate() SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment() pNFS/flexfiles: Fix list corruption if the mirror count changes NFSv4 fix CLOSE not waiting for direct IO compeletion xfs: add agf freeblocks verify in xfs_agf_verify Revert "tty: hvc: Fix data abort due to race in hvc_open" Linux 4.9.229 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I0ce84c8f4c2c437fee36399c358c3dcc19fdfc1d
351 lines
8.1 KiB
C
351 lines
8.1 KiB
C
/*
|
|
* SAMSUNG EXYNOS USB HOST EHCI Controller
|
|
*
|
|
* Copyright (C) 2011 Samsung Electronics Co.Ltd
|
|
* Author: Jingoo Han <jg1.han@samsung.com>
|
|
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
|
|
#include "ehci.h"
|
|
|
|
#define DRIVER_DESC "EHCI EXYNOS driver"
|
|
|
|
#define EHCI_INSNREG00(base) (base + 0x90)
|
|
#define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25)
|
|
#define EHCI_INSNREG00_ENA_INCR8 (0x1 << 24)
|
|
#define EHCI_INSNREG00_ENA_INCR4 (0x1 << 23)
|
|
#define EHCI_INSNREG00_ENA_INCRX_ALIGN (0x1 << 22)
|
|
#define EHCI_INSNREG00_ENABLE_DMA_BURST \
|
|
(EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \
|
|
EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
|
|
|
|
static const char hcd_name[] = "ehci-exynos";
|
|
static struct hc_driver __read_mostly exynos_ehci_hc_driver;
|
|
|
|
#define PHY_NUMBER 3
|
|
|
|
struct exynos_ehci_hcd {
|
|
struct clk *clk;
|
|
struct phy *phy[PHY_NUMBER];
|
|
};
|
|
|
|
#define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
|
|
|
|
static int exynos_ehci_get_phy(struct device *dev,
|
|
struct exynos_ehci_hcd *exynos_ehci)
|
|
{
|
|
struct device_node *child;
|
|
struct phy *phy;
|
|
int phy_number;
|
|
int ret;
|
|
|
|
/* Get PHYs for the controller */
|
|
for_each_available_child_of_node(dev->of_node, child) {
|
|
ret = of_property_read_u32(child, "reg", &phy_number);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to parse device tree\n");
|
|
of_node_put(child);
|
|
return ret;
|
|
}
|
|
|
|
if (phy_number >= PHY_NUMBER) {
|
|
dev_err(dev, "Invalid number of PHYs\n");
|
|
of_node_put(child);
|
|
return -EINVAL;
|
|
}
|
|
|
|
phy = devm_of_phy_get(dev, child, NULL);
|
|
exynos_ehci->phy[phy_number] = phy;
|
|
if (IS_ERR(phy)) {
|
|
ret = PTR_ERR(phy);
|
|
if (ret == -EPROBE_DEFER) {
|
|
of_node_put(child);
|
|
return ret;
|
|
} else if (ret != -ENOSYS && ret != -ENODEV) {
|
|
dev_err(dev,
|
|
"Error retrieving usb2 phy: %d\n", ret);
|
|
of_node_put(child);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_ehci_phy_enable(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
|
|
int i;
|
|
int ret = 0;
|
|
|
|
for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
|
|
if (!IS_ERR(exynos_ehci->phy[i]))
|
|
ret = phy_power_on(exynos_ehci->phy[i]);
|
|
if (ret)
|
|
for (i--; i >= 0; i--)
|
|
if (!IS_ERR(exynos_ehci->phy[i]))
|
|
phy_power_off(exynos_ehci->phy[i]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void exynos_ehci_phy_disable(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
|
|
int i;
|
|
|
|
for (i = 0; i < PHY_NUMBER; i++)
|
|
if (!IS_ERR(exynos_ehci->phy[i]))
|
|
phy_power_off(exynos_ehci->phy[i]);
|
|
}
|
|
|
|
static void exynos_setup_vbus_gpio(struct device *dev)
|
|
{
|
|
int err;
|
|
int gpio;
|
|
|
|
if (!dev->of_node)
|
|
return;
|
|
|
|
gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0);
|
|
if (!gpio_is_valid(gpio))
|
|
return;
|
|
|
|
err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH,
|
|
"ehci_vbus_gpio");
|
|
if (err)
|
|
dev_err(dev, "can't request ehci vbus gpio %d", gpio);
|
|
}
|
|
|
|
static int exynos_ehci_probe(struct platform_device *pdev)
|
|
{
|
|
struct exynos_ehci_hcd *exynos_ehci;
|
|
struct usb_hcd *hcd;
|
|
struct ehci_hcd *ehci;
|
|
struct resource *res;
|
|
int irq;
|
|
int err;
|
|
|
|
/*
|
|
* Right now device-tree probed devices don't get dma_mask set.
|
|
* Since shared usb code relies on it, set it here for now.
|
|
* Once we move to full device tree support this will vanish off.
|
|
*/
|
|
err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (err)
|
|
return err;
|
|
|
|
exynos_setup_vbus_gpio(&pdev->dev);
|
|
|
|
hcd = usb_create_hcd(&exynos_ehci_hc_driver,
|
|
&pdev->dev, dev_name(&pdev->dev));
|
|
if (!hcd) {
|
|
dev_err(&pdev->dev, "Unable to create HCD\n");
|
|
return -ENOMEM;
|
|
}
|
|
exynos_ehci = to_exynos_ehci(hcd);
|
|
|
|
if (of_device_is_compatible(pdev->dev.of_node,
|
|
"samsung,exynos5440-ehci"))
|
|
goto skip_phy;
|
|
|
|
err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci);
|
|
if (err)
|
|
goto fail_clk;
|
|
|
|
skip_phy:
|
|
|
|
exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
|
|
|
|
if (IS_ERR(exynos_ehci->clk)) {
|
|
dev_err(&pdev->dev, "Failed to get usbhost clock\n");
|
|
err = PTR_ERR(exynos_ehci->clk);
|
|
goto fail_clk;
|
|
}
|
|
|
|
err = clk_prepare_enable(exynos_ehci->clk);
|
|
if (err)
|
|
goto fail_clk;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(hcd->regs)) {
|
|
err = PTR_ERR(hcd->regs);
|
|
goto fail_io;
|
|
}
|
|
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
err = irq;
|
|
goto fail_io;
|
|
}
|
|
|
|
err = exynos_ehci_phy_enable(&pdev->dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to enable USB phy\n");
|
|
goto fail_io;
|
|
}
|
|
|
|
ehci = hcd_to_ehci(hcd);
|
|
ehci->caps = hcd->regs;
|
|
|
|
/* DMA burst Enable */
|
|
writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
|
|
|
|
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to add USB HCD\n");
|
|
goto fail_add_hcd;
|
|
}
|
|
device_wakeup_enable(hcd->self.controller);
|
|
|
|
platform_set_drvdata(pdev, hcd);
|
|
|
|
return 0;
|
|
|
|
fail_add_hcd:
|
|
exynos_ehci_phy_disable(&pdev->dev);
|
|
fail_io:
|
|
clk_disable_unprepare(exynos_ehci->clk);
|
|
fail_clk:
|
|
usb_put_hcd(hcd);
|
|
return err;
|
|
}
|
|
|
|
static int exynos_ehci_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
|
|
|
|
usb_remove_hcd(hcd);
|
|
|
|
exynos_ehci_phy_disable(&pdev->dev);
|
|
|
|
clk_disable_unprepare(exynos_ehci->clk);
|
|
|
|
usb_put_hcd(hcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int exynos_ehci_suspend(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
|
|
|
|
bool do_wakeup = device_may_wakeup(dev);
|
|
int rc;
|
|
|
|
rc = ehci_suspend(hcd, do_wakeup);
|
|
if (rc)
|
|
return rc;
|
|
|
|
exynos_ehci_phy_disable(dev);
|
|
|
|
clk_disable_unprepare(exynos_ehci->clk);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int exynos_ehci_resume(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
|
|
int ret;
|
|
|
|
clk_prepare_enable(exynos_ehci->clk);
|
|
|
|
ret = exynos_ehci_phy_enable(dev);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable USB phy\n");
|
|
clk_disable_unprepare(exynos_ehci->clk);
|
|
return ret;
|
|
}
|
|
|
|
/* DMA burst Enable */
|
|
writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
|
|
|
|
ehci_resume(hcd, false);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define exynos_ehci_suspend NULL
|
|
#define exynos_ehci_resume NULL
|
|
#endif
|
|
|
|
static const struct dev_pm_ops exynos_ehci_pm_ops = {
|
|
.suspend = exynos_ehci_suspend,
|
|
.resume = exynos_ehci_resume,
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id exynos_ehci_match[] = {
|
|
{ .compatible = "samsung,exynos4210-ehci" },
|
|
{ .compatible = "samsung,exynos5440-ehci" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, exynos_ehci_match);
|
|
#endif
|
|
|
|
static struct platform_driver exynos_ehci_driver = {
|
|
.probe = exynos_ehci_probe,
|
|
.remove = exynos_ehci_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
.driver = {
|
|
.name = "exynos-ehci",
|
|
.pm = &exynos_ehci_pm_ops,
|
|
.of_match_table = of_match_ptr(exynos_ehci_match),
|
|
}
|
|
};
|
|
static const struct ehci_driver_overrides exynos_overrides __initconst = {
|
|
.extra_priv_size = sizeof(struct exynos_ehci_hcd),
|
|
};
|
|
|
|
static int __init ehci_exynos_init(void)
|
|
{
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
|
|
ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides);
|
|
return platform_driver_register(&exynos_ehci_driver);
|
|
}
|
|
module_init(ehci_exynos_init);
|
|
|
|
static void __exit ehci_exynos_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&exynos_ehci_driver);
|
|
}
|
|
module_exit(ehci_exynos_cleanup);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_ALIAS("platform:exynos-ehci");
|
|
MODULE_AUTHOR("Jingoo Han");
|
|
MODULE_AUTHOR("Joonyoung Shim");
|
|
MODULE_LICENSE("GPL v2");
|