Changes in 4.9.249 spi: bcm2835aux: Fix use-after-free on unbind spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe iwlwifi: pcie: limit memory read spin time arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. ARC: stack unwinding: don't assume non-current task is sleeping platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE Input: cm109 - do not stomp on control URB Input: i8042 - add Acer laptops to the i8042 reset list pinctrl: amd: remove debounce filter setting in IRQ type setting scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" spi: Prevent adding devices below an unregistering controller net/mlx4_en: Avoid scheduling restart task if it is already running tcp: fix cwnd-limited bug for TSO deferral where we send nothing net: stmmac: delete the eee_ctrl_timer after napi disabled net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux net: bridge: vlan: fix error return code in __vlan_add() mac80211: mesh: fix mesh_pathtbl_init() error path USB: dummy-hcd: Fix uninitialized array use in init() USB: add RESET_RESUME quirk for Snapscan 1212 ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: usb-audio: Fix control 'access overflow' errors from chmap xhci: Give USB2 ports time to enter U3 in bus suspend USB: sisusbvga: Make console support depend on BROKEN ALSA: pcm: oss: Fix potential out-of-bounds shift serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access pinctrl: merrifield: Set default bias in case no particular value given pinctrl: baytrail: Avoid clearing debounce value when turning it off scsi: bnx2i: Requires MMU can: softing: softing_netdev_open(): fix error handling RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling drm/tegra: sor: Disable clocks on error in tegra_sor_init() scsi: mpt3sas: Increase IOCInit request timeout to 30s dm table: Remove BUG_ON(in_interrupt()) soc/tegra: fuse: Fix index bug in get_process_id USB: serial: option: add interface-number sanity check to flag handling USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XU ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410 ARM: dts: exynos: fix USB 3.0 pins supply being turned off on Odroid XU HID: i2c-hid: add Vero K147 to descriptor override serial_core: Check for port state when tty is in error state media: msi2500: assign SPI bus number dynamically md: fix a warning caused by a race between concurrent md_ioctl()s Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() drm/gma500: fix double free of gma_connector RDMA/rxe: Compute PSN windows correctly ARM: p2v: fix handling of LPAE translation in BE mode crypto: talitos - Fix return type of current_desc_hdr() spi: img-spfi: fix reference leak in img_spfi_resume ASoC: pcm: DRAIN support reactivation arm64: dts: exynos: Correct psci compatible used on Exynos7 Bluetooth: Fix null pointer dereference in hci_event_packet() spi: spi-ti-qspi: fix reference leak in ti_qspi_setup spi: tegra20-slink: fix reference leak in slink ops of tegra20 spi: tegra20-sflash: fix reference leak in tegra_sflash_resume spi: tegra114: fix reference leak in tegra spi ops RDMa/mthca: Work around -Wenum-conversion warning MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA staging: greybus: codecs: Fix reference counter leak in error handling media: solo6x10: fix missing snd_card_free in error handling case drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() Input: ads7846 - fix integer overflow on Rt calculation Input: ads7846 - fix unaligned access on 7845 powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 crypto: omap-aes - Fix PM disable depth imbalance in omap_aes_probe soc: ti: knav_qmss: fix reference leak in knav_queue_probe soc: ti: Fix reference imbalance in knav_dma_probe drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe RDMA/cxgb4: Validate the number of CQEs memstick: fix a double-free bug in memstick_check ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host orinoco: Move context allocation after processing the skb cw1200: fix missing destroy_workqueue() on error in cw1200_init_common media: siano: fix memory leak of debugfs members in smsdvb_hotplug mips: cdmm: fix use-after-free in mips_cdmm_bus_discover HSI: omap_ssi: Don't jump to free ID in ssi_add_controller() ARM: dts: at91: at91sam9rl: fix ADC triggers NFSv4.2: condition READDIR's mask for security label based on LSM state SUNRPC: xprt_load_transport() needs to support the netid "rdma6" lockd: don't use interval-based rebinding over TCP NFS: switch nfsiod to be an UNBOUND workqueue. vfio-pci: Use io_remap_pfn_range() for PCI IO memory media: saa7146: fix array overflow in vidioc_s_audio() clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent() pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe() memstick: r592: Fix error return in r592_probe() ASoC: jz4740-i2s: add missed checks for clk_get() dm ioctl: fix error return code in target_message clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI cpufreq: highbank: Add missing MODULE_DEVICE_TABLE cpufreq: st: Add missing MODULE_DEVICE_TABLE cpufreq: loongson1: Add missing MODULE_ALIAS cpufreq: scpi: Add missing MODULE_ALIAS scsi: pm80xx: Fix error return in pm8001_pci_probe() seq_buf: Avoid type mismatch for seq_buf_init scsi: fnic: Fix error return code in fnic_probe() powerpc/pseries/hibernation: drop pseries_suspend_begin() from suspend ops usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probe usb: oxu210hp-hcd: Fix memory leak in oxu_create speakup: fix uninitialized flush_lock nfsd: Fix message level for normal termination nfs_common: need lock during iterate through the list x86/kprobes: Restore BTF if the single-stepping is cancelled clk: tegra: Fix duplicated SE clock entry extcon: max77693: Fix modalias string ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control() irqchip/alpine-msi: Fix freeing of interrupts on allocation error path um: chan_xterm: Fix fd leak nfc: s3fwrn5: Release the nfc firmware powerpc/ps3: use dma_mapping_error() checkpatch: fix unescaped left brace net: bcmgenet: Fix a resource leak in an error handling path in the probe functin net: allwinner: Fix some resources leak in the error handling path of the probe and in the remove function net: korina: fix return value watchdog: qcom: Avoid context switch in restart handler clk: ti: Fix memleak in ti_fapll_synth_setup perf record: Fix memory leak when using '--user-regs=?' to list registers qlcnic: Fix error code in probe clk: s2mps11: Fix a resource leak in error handling paths in the probe function cfg80211: initialize rekey_data Input: cros_ec_keyb - send 'scancodes' in addition to key events Input: goodix - add upside-down quirk for Teclast X98 Pro tablet media: gspca: Fix memory leak in probe media: sunxi-cir: ensure IR is handled when it is continuous media: netup_unidvb: Don't leak SPI master in probe error path Input: cyapa_gen6 - fix out-of-bounds stack access Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks" ACPI: PNP: compare the string length in the matching_id() ALSA: pcm: oss: Fix a few more UBSAN fixes ALSA: usb-audio: Disable sample read check if firmware doesn't give back s390/dasd: prevent inconsistent LCU device data s390/dasd: fix list corruption of pavgroup group list s390/dasd: fix list corruption of lcu list staging: comedi: mf6x4: Fix AI end-of-conversion detection powerpc/perf: Exclude kernel samples while counting events in user space. USB: serial: mos7720: fix parallel-port state restore USB: serial: keyspan_pda: fix dropped unthrottle interrupts USB: serial: keyspan_pda: fix write deadlock USB: serial: keyspan_pda: fix stalled writes USB: serial: keyspan_pda: fix write-wakeup use-after-free USB: serial: keyspan_pda: fix tx-unthrottle use-after-free USB: serial: keyspan_pda: fix write unthrottling btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block() Btrfs: fix selftests failure due to uninitialized i_mode in test inodes btrfs: fix return value mixup in btrfs_get_extent ext4: fix a memory leak of ext4_free_data KVM: arm64: Introduce handling of AArch32 TTBCR2 traps powerpc/xmon: Change printk() to pr_cont() ceph: fix race in concurrent __ceph_remove_cap invocations jffs2: Fix GC exit abnormally jfs: Fix array index bounds check in dbAdjTree drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor() spi: spi-sh: Fix use-after-free on unbind spi: davinci: Fix use-after-free on unbind spi: pic32: Don't leak DMA channels in probe error path spi: rb4xx: Don't leak SPI master in probe error path spi: sc18is602: Don't leak SPI master in probe error path spi: st-ssc4: Fix unbalanced pm_runtime_disable() in probe error path soc: qcom: smp2p: Safely acquire spinlock without IRQs mtd: parser: cmdline: Fix parsing of part-names with colons iio: buffer: Fix demux update iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume iio:pressure:mpl3115: Force alignment of buffer clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 xen-blkback: set ring->xenblkd to NULL after kthread_stop() PCI: Fix pci_slot_release() NULL pointer dereference Linux 4.9.249 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I4829a32e2ea6e76eefea716f35f42ee02b75c265
1369 lines
33 KiB
C
1369 lines
33 KiB
C
/*
|
|
* f_midi.c -- USB MIDI class function driver
|
|
*
|
|
* Copyright (C) 2006 Thumtronics Pty Ltd.
|
|
* Developed for Thumtronics by Grey Innovation
|
|
* Ben Williamson <ben.williamson@greyinnovation.com>
|
|
*
|
|
* Rewritten for the composite framework
|
|
* Copyright (C) 2011 Daniel Mack <zonque@gmail.com>
|
|
*
|
|
* Based on drivers/usb/gadget/f_audio.c,
|
|
* Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
|
|
* Copyright (C) 2008 Analog Devices, Inc
|
|
*
|
|
* and drivers/usb/gadget/midi.c,
|
|
* Copyright (C) 2006 Thumtronics Pty Ltd.
|
|
* Ben Williamson <ben.williamson@greyinnovation.com>
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kfifo.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/rawmidi.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/audio.h>
|
|
#include <linux/usb/midi.h>
|
|
|
|
#include "u_f.h"
|
|
#include "u_midi.h"
|
|
|
|
MODULE_AUTHOR("Ben Williamson");
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
static const char f_midi_shortname[] = "f_midi";
|
|
static const char f_midi_longname[] = "MIDI Gadget";
|
|
|
|
/*
|
|
* We can only handle 16 cables on one single endpoint, as cable numbers are
|
|
* stored in 4-bit fields. And as the interface currently only holds one
|
|
* single endpoint, this is the maximum number of ports we can allow.
|
|
*/
|
|
#define MAX_PORTS 16
|
|
|
|
/* MIDI message states */
|
|
enum {
|
|
STATE_INITIAL = 0, /* pseudo state */
|
|
STATE_1PARAM,
|
|
STATE_2PARAM_1,
|
|
STATE_2PARAM_2,
|
|
STATE_SYSEX_0,
|
|
STATE_SYSEX_1,
|
|
STATE_SYSEX_2,
|
|
STATE_REAL_TIME,
|
|
STATE_FINISHED, /* pseudo state */
|
|
};
|
|
|
|
/*
|
|
* This is a gadget, and the IN/OUT naming is from the host's perspective.
|
|
* USB -> OUT endpoint -> rawmidi
|
|
* USB <- IN endpoint <- rawmidi
|
|
*/
|
|
struct gmidi_in_port {
|
|
struct snd_rawmidi_substream *substream;
|
|
int active;
|
|
uint8_t cable;
|
|
uint8_t state;
|
|
uint8_t data[2];
|
|
};
|
|
|
|
struct f_midi {
|
|
struct usb_function func;
|
|
struct usb_gadget *gadget;
|
|
struct usb_ep *in_ep, *out_ep;
|
|
struct snd_card *card;
|
|
struct snd_rawmidi *rmidi;
|
|
u8 ms_id;
|
|
|
|
struct snd_rawmidi_substream *out_substream[MAX_PORTS];
|
|
|
|
unsigned long out_triggered;
|
|
struct tasklet_struct tasklet;
|
|
unsigned int in_ports;
|
|
unsigned int out_ports;
|
|
int index;
|
|
char *id;
|
|
unsigned int buflen, qlen;
|
|
/* This fifo is used as a buffer ring for pre-allocated IN usb_requests */
|
|
DECLARE_KFIFO_PTR(in_req_fifo, struct usb_request *);
|
|
spinlock_t transmit_lock;
|
|
unsigned int in_last_port;
|
|
|
|
struct gmidi_in_port in_ports_array[/* in_ports */];
|
|
};
|
|
|
|
static inline struct f_midi *func_to_midi(struct usb_function *f)
|
|
{
|
|
return container_of(f, struct f_midi, func);
|
|
}
|
|
|
|
static void f_midi_transmit(struct f_midi *midi);
|
|
|
|
DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
|
|
DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
|
|
DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16);
|
|
|
|
/* B.3.1 Standard AC Interface Descriptor */
|
|
static struct usb_interface_descriptor ac_interface_desc = {
|
|
.bLength = USB_DT_INTERFACE_SIZE,
|
|
.bDescriptorType = USB_DT_INTERFACE,
|
|
/* .bInterfaceNumber = DYNAMIC */
|
|
/* .bNumEndpoints = DYNAMIC */
|
|
.bInterfaceClass = USB_CLASS_AUDIO,
|
|
.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
|
|
/* .iInterface = DYNAMIC */
|
|
};
|
|
|
|
/* B.3.2 Class-Specific AC Interface Descriptor */
|
|
static struct uac1_ac_header_descriptor_1 ac_header_desc = {
|
|
.bLength = UAC_DT_AC_HEADER_SIZE(1),
|
|
.bDescriptorType = USB_DT_CS_INTERFACE,
|
|
.bDescriptorSubtype = USB_MS_HEADER,
|
|
.bcdADC = cpu_to_le16(0x0100),
|
|
.wTotalLength = cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)),
|
|
.bInCollection = 1,
|
|
/* .baInterfaceNr = DYNAMIC */
|
|
};
|
|
|
|
/* B.4.1 Standard MS Interface Descriptor */
|
|
static struct usb_interface_descriptor ms_interface_desc = {
|
|
.bLength = USB_DT_INTERFACE_SIZE,
|
|
.bDescriptorType = USB_DT_INTERFACE,
|
|
/* .bInterfaceNumber = DYNAMIC */
|
|
.bNumEndpoints = 2,
|
|
.bInterfaceClass = USB_CLASS_AUDIO,
|
|
.bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING,
|
|
/* .iInterface = DYNAMIC */
|
|
};
|
|
|
|
/* B.4.2 Class-Specific MS Interface Descriptor */
|
|
static struct usb_ms_header_descriptor ms_header_desc = {
|
|
.bLength = USB_DT_MS_HEADER_SIZE,
|
|
.bDescriptorType = USB_DT_CS_INTERFACE,
|
|
.bDescriptorSubtype = USB_MS_HEADER,
|
|
.bcdMSC = cpu_to_le16(0x0100),
|
|
/* .wTotalLength = DYNAMIC */
|
|
};
|
|
|
|
/* B.5.1 Standard Bulk OUT Endpoint Descriptor */
|
|
static struct usb_endpoint_descriptor bulk_out_desc = {
|
|
.bLength = USB_DT_ENDPOINT_AUDIO_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_OUT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
};
|
|
|
|
/* B.5.2 Class-specific MS Bulk OUT Endpoint Descriptor */
|
|
static struct usb_ms_endpoint_descriptor_16 ms_out_desc = {
|
|
/* .bLength = DYNAMIC */
|
|
.bDescriptorType = USB_DT_CS_ENDPOINT,
|
|
.bDescriptorSubtype = USB_MS_GENERAL,
|
|
/* .bNumEmbMIDIJack = DYNAMIC */
|
|
/* .baAssocJackID = DYNAMIC */
|
|
};
|
|
|
|
/* B.6.1 Standard Bulk IN Endpoint Descriptor */
|
|
static struct usb_endpoint_descriptor bulk_in_desc = {
|
|
.bLength = USB_DT_ENDPOINT_AUDIO_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_IN,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
};
|
|
|
|
/* B.6.2 Class-specific MS Bulk IN Endpoint Descriptor */
|
|
static struct usb_ms_endpoint_descriptor_16 ms_in_desc = {
|
|
/* .bLength = DYNAMIC */
|
|
.bDescriptorType = USB_DT_CS_ENDPOINT,
|
|
.bDescriptorSubtype = USB_MS_GENERAL,
|
|
/* .bNumEmbMIDIJack = DYNAMIC */
|
|
/* .baAssocJackID = DYNAMIC */
|
|
};
|
|
|
|
/* string IDs are assigned dynamically */
|
|
|
|
#define STRING_FUNC_IDX 0
|
|
|
|
static struct usb_string midi_string_defs[] = {
|
|
[STRING_FUNC_IDX].s = "MIDI function",
|
|
{ } /* end of list */
|
|
};
|
|
|
|
static struct usb_gadget_strings midi_stringtab = {
|
|
.language = 0x0409, /* en-us */
|
|
.strings = midi_string_defs,
|
|
};
|
|
|
|
static struct usb_gadget_strings *midi_strings[] = {
|
|
&midi_stringtab,
|
|
NULL,
|
|
};
|
|
|
|
static inline struct usb_request *midi_alloc_ep_req(struct usb_ep *ep,
|
|
unsigned length)
|
|
{
|
|
return alloc_ep_req(ep, length);
|
|
}
|
|
|
|
static const uint8_t f_midi_cin_length[] = {
|
|
0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
|
|
};
|
|
|
|
/*
|
|
* Receives a chunk of MIDI data.
|
|
*/
|
|
static void f_midi_read_data(struct usb_ep *ep, int cable,
|
|
uint8_t *data, int length)
|
|
{
|
|
struct f_midi *midi = ep->driver_data;
|
|
struct snd_rawmidi_substream *substream = midi->out_substream[cable];
|
|
|
|
if (!substream)
|
|
/* Nobody is listening - throw it on the floor. */
|
|
return;
|
|
|
|
if (!test_bit(cable, &midi->out_triggered))
|
|
return;
|
|
|
|
snd_rawmidi_receive(substream, data, length);
|
|
}
|
|
|
|
static void f_midi_handle_out_data(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
unsigned int i;
|
|
u8 *buf = req->buf;
|
|
|
|
for (i = 0; i + 3 < req->actual; i += 4)
|
|
if (buf[i] != 0) {
|
|
int cable = buf[i] >> 4;
|
|
int length = f_midi_cin_length[buf[i] & 0x0f];
|
|
f_midi_read_data(ep, cable, &buf[i + 1], length);
|
|
}
|
|
}
|
|
|
|
static void
|
|
f_midi_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct f_midi *midi = ep->driver_data;
|
|
struct usb_composite_dev *cdev = midi->func.config->cdev;
|
|
int status = req->status;
|
|
|
|
switch (status) {
|
|
case 0: /* normal completion */
|
|
if (ep == midi->out_ep) {
|
|
/* We received stuff. req is queued again, below */
|
|
f_midi_handle_out_data(ep, req);
|
|
} else if (ep == midi->in_ep) {
|
|
/* Our transmit completed. See if there's more to go.
|
|
* f_midi_transmit eats req, don't queue it again. */
|
|
req->length = 0;
|
|
f_midi_transmit(midi);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
/* this endpoint is normally active while we're configured */
|
|
case -ECONNABORTED: /* hardware forced ep reset */
|
|
case -ECONNRESET: /* request dequeued */
|
|
case -ESHUTDOWN: /* disconnect from host */
|
|
VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status,
|
|
req->actual, req->length);
|
|
if (ep == midi->out_ep) {
|
|
f_midi_handle_out_data(ep, req);
|
|
/* We don't need to free IN requests because it's handled
|
|
* by the midi->in_req_fifo. */
|
|
free_ep_req(ep, req);
|
|
}
|
|
return;
|
|
|
|
case -EOVERFLOW: /* buffer overrun on read means that
|
|
* we didn't provide a big enough buffer.
|
|
*/
|
|
default:
|
|
DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name,
|
|
status, req->actual, req->length);
|
|
break;
|
|
case -EREMOTEIO: /* short read */
|
|
break;
|
|
}
|
|
|
|
status = usb_ep_queue(ep, req, GFP_ATOMIC);
|
|
if (status) {
|
|
ERROR(cdev, "kill %s: resubmit %d bytes --> %d\n",
|
|
ep->name, req->length, status);
|
|
usb_ep_set_halt(ep);
|
|
/* FIXME recover later ... somehow */
|
|
}
|
|
}
|
|
|
|
static void f_midi_drop_out_substreams(struct f_midi *midi)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < midi->in_ports; i++) {
|
|
struct gmidi_in_port *port = midi->in_ports_array + i;
|
|
struct snd_rawmidi_substream *substream = port->substream;
|
|
|
|
if (port->active && substream)
|
|
snd_rawmidi_drop_output(substream);
|
|
}
|
|
}
|
|
|
|
static int f_midi_start_ep(struct f_midi *midi,
|
|
struct usb_function *f,
|
|
struct usb_ep *ep)
|
|
{
|
|
int err;
|
|
struct usb_composite_dev *cdev = f->config->cdev;
|
|
|
|
usb_ep_disable(ep);
|
|
|
|
err = config_ep_by_speed(midi->gadget, f, ep);
|
|
if (err) {
|
|
ERROR(cdev, "can't configure %s: %d\n", ep->name, err);
|
|
return err;
|
|
}
|
|
|
|
err = usb_ep_enable(ep);
|
|
if (err) {
|
|
ERROR(cdev, "can't start %s: %d\n", ep->name, err);
|
|
return err;
|
|
}
|
|
|
|
ep->driver_data = midi;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
|
|
{
|
|
struct f_midi *midi = func_to_midi(f);
|
|
unsigned i;
|
|
int err;
|
|
|
|
/* we only set alt for MIDIStreaming interface */
|
|
if (intf != midi->ms_id)
|
|
return 0;
|
|
|
|
err = f_midi_start_ep(midi, f, midi->in_ep);
|
|
if (err)
|
|
return err;
|
|
|
|
err = f_midi_start_ep(midi, f, midi->out_ep);
|
|
if (err)
|
|
return err;
|
|
|
|
/* pre-allocate write usb requests to use on f_midi_transmit. */
|
|
while (kfifo_avail(&midi->in_req_fifo)) {
|
|
struct usb_request *req =
|
|
midi_alloc_ep_req(midi->in_ep, midi->buflen);
|
|
|
|
if (req == NULL)
|
|
return -ENOMEM;
|
|
|
|
req->length = 0;
|
|
req->complete = f_midi_complete;
|
|
|
|
kfifo_put(&midi->in_req_fifo, req);
|
|
}
|
|
|
|
/* allocate a bunch of read buffers and queue them all at once. */
|
|
for (i = 0; i < midi->qlen && err == 0; i++) {
|
|
struct usb_request *req =
|
|
midi_alloc_ep_req(midi->out_ep, midi->buflen);
|
|
|
|
if (req == NULL)
|
|
return -ENOMEM;
|
|
|
|
req->complete = f_midi_complete;
|
|
err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC);
|
|
if (err) {
|
|
ERROR(midi, "%s: couldn't enqueue request: %d\n",
|
|
midi->out_ep->name, err);
|
|
if (req->buf != NULL)
|
|
free_ep_req(midi->out_ep, req);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void f_midi_disable(struct usb_function *f)
|
|
{
|
|
struct f_midi *midi = func_to_midi(f);
|
|
struct usb_composite_dev *cdev = f->config->cdev;
|
|
struct usb_request *req = NULL;
|
|
|
|
DBG(cdev, "disable\n");
|
|
|
|
/*
|
|
* just disable endpoints, forcing completion of pending i/o.
|
|
* all our completion handlers free their requests in this case.
|
|
*/
|
|
usb_ep_disable(midi->in_ep);
|
|
usb_ep_disable(midi->out_ep);
|
|
|
|
/* release IN requests */
|
|
while (kfifo_get(&midi->in_req_fifo, &req))
|
|
free_ep_req(midi->in_ep, req);
|
|
|
|
f_midi_drop_out_substreams(midi);
|
|
}
|
|
|
|
static int f_midi_snd_free(struct snd_device *device)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Converts MIDI commands to USB MIDI packets.
|
|
*/
|
|
static void f_midi_transmit_byte(struct usb_request *req,
|
|
struct gmidi_in_port *port, uint8_t b)
|
|
{
|
|
uint8_t p[4] = { port->cable << 4, 0, 0, 0 };
|
|
uint8_t next_state = STATE_INITIAL;
|
|
|
|
switch (b) {
|
|
case 0xf8 ... 0xff:
|
|
/* System Real-Time Messages */
|
|
p[0] |= 0x0f;
|
|
p[1] = b;
|
|
next_state = port->state;
|
|
port->state = STATE_REAL_TIME;
|
|
break;
|
|
|
|
case 0xf7:
|
|
/* End of SysEx */
|
|
switch (port->state) {
|
|
case STATE_SYSEX_0:
|
|
p[0] |= 0x05;
|
|
p[1] = 0xf7;
|
|
next_state = STATE_FINISHED;
|
|
break;
|
|
case STATE_SYSEX_1:
|
|
p[0] |= 0x06;
|
|
p[1] = port->data[0];
|
|
p[2] = 0xf7;
|
|
next_state = STATE_FINISHED;
|
|
break;
|
|
case STATE_SYSEX_2:
|
|
p[0] |= 0x07;
|
|
p[1] = port->data[0];
|
|
p[2] = port->data[1];
|
|
p[3] = 0xf7;
|
|
next_state = STATE_FINISHED;
|
|
break;
|
|
default:
|
|
/* Ignore byte */
|
|
next_state = port->state;
|
|
port->state = STATE_INITIAL;
|
|
}
|
|
break;
|
|
|
|
case 0xf0 ... 0xf6:
|
|
/* System Common Messages */
|
|
port->data[0] = port->data[1] = 0;
|
|
port->state = STATE_INITIAL;
|
|
switch (b) {
|
|
case 0xf0:
|
|
port->data[0] = b;
|
|
port->data[1] = 0;
|
|
next_state = STATE_SYSEX_1;
|
|
break;
|
|
case 0xf1:
|
|
case 0xf3:
|
|
port->data[0] = b;
|
|
next_state = STATE_1PARAM;
|
|
break;
|
|
case 0xf2:
|
|
port->data[0] = b;
|
|
next_state = STATE_2PARAM_1;
|
|
break;
|
|
case 0xf4:
|
|
case 0xf5:
|
|
next_state = STATE_INITIAL;
|
|
break;
|
|
case 0xf6:
|
|
p[0] |= 0x05;
|
|
p[1] = 0xf6;
|
|
next_state = STATE_FINISHED;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case 0x80 ... 0xef:
|
|
/*
|
|
* Channel Voice Messages, Channel Mode Messages
|
|
* and Control Change Messages.
|
|
*/
|
|
port->data[0] = b;
|
|
port->data[1] = 0;
|
|
port->state = STATE_INITIAL;
|
|
if (b >= 0xc0 && b <= 0xdf)
|
|
next_state = STATE_1PARAM;
|
|
else
|
|
next_state = STATE_2PARAM_1;
|
|
break;
|
|
|
|
case 0x00 ... 0x7f:
|
|
/* Message parameters */
|
|
switch (port->state) {
|
|
case STATE_1PARAM:
|
|
if (port->data[0] < 0xf0)
|
|
p[0] |= port->data[0] >> 4;
|
|
else
|
|
p[0] |= 0x02;
|
|
|
|
p[1] = port->data[0];
|
|
p[2] = b;
|
|
/* This is to allow Running State Messages */
|
|
next_state = STATE_1PARAM;
|
|
break;
|
|
case STATE_2PARAM_1:
|
|
port->data[1] = b;
|
|
next_state = STATE_2PARAM_2;
|
|
break;
|
|
case STATE_2PARAM_2:
|
|
if (port->data[0] < 0xf0)
|
|
p[0] |= port->data[0] >> 4;
|
|
else
|
|
p[0] |= 0x03;
|
|
|
|
p[1] = port->data[0];
|
|
p[2] = port->data[1];
|
|
p[3] = b;
|
|
/* This is to allow Running State Messages */
|
|
next_state = STATE_2PARAM_1;
|
|
break;
|
|
case STATE_SYSEX_0:
|
|
port->data[0] = b;
|
|
next_state = STATE_SYSEX_1;
|
|
break;
|
|
case STATE_SYSEX_1:
|
|
port->data[1] = b;
|
|
next_state = STATE_SYSEX_2;
|
|
break;
|
|
case STATE_SYSEX_2:
|
|
p[0] |= 0x04;
|
|
p[1] = port->data[0];
|
|
p[2] = port->data[1];
|
|
p[3] = b;
|
|
next_state = STATE_SYSEX_0;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* States where we have to write into the USB request */
|
|
if (next_state == STATE_FINISHED ||
|
|
port->state == STATE_SYSEX_2 ||
|
|
port->state == STATE_1PARAM ||
|
|
port->state == STATE_2PARAM_2 ||
|
|
port->state == STATE_REAL_TIME) {
|
|
|
|
unsigned int length = req->length;
|
|
u8 *buf = (u8 *)req->buf + length;
|
|
|
|
memcpy(buf, p, sizeof(p));
|
|
req->length = length + sizeof(p);
|
|
|
|
if (next_state == STATE_FINISHED) {
|
|
next_state = STATE_INITIAL;
|
|
port->data[0] = port->data[1] = 0;
|
|
}
|
|
}
|
|
|
|
port->state = next_state;
|
|
}
|
|
|
|
static int f_midi_do_transmit(struct f_midi *midi, struct usb_ep *ep)
|
|
{
|
|
struct usb_request *req = NULL;
|
|
unsigned int len, i;
|
|
bool active = false;
|
|
int err;
|
|
|
|
/*
|
|
* We peek the request in order to reuse it if it fails to enqueue on
|
|
* its endpoint
|
|
*/
|
|
len = kfifo_peek(&midi->in_req_fifo, &req);
|
|
if (len != 1) {
|
|
ERROR(midi, "%s: Couldn't get usb request\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* If buffer overrun, then we ignore this transmission.
|
|
* IMPORTANT: This will cause the user-space rawmidi device to block
|
|
* until a) usb requests have been completed or b) snd_rawmidi_write()
|
|
* times out.
|
|
*/
|
|
if (req->length > 0)
|
|
return 0;
|
|
|
|
for (i = midi->in_last_port; i < midi->in_ports; ++i) {
|
|
struct gmidi_in_port *port = midi->in_ports_array + i;
|
|
struct snd_rawmidi_substream *substream = port->substream;
|
|
|
|
if (!port->active || !substream)
|
|
continue;
|
|
|
|
while (req->length + 3 < midi->buflen) {
|
|
uint8_t b;
|
|
|
|
if (snd_rawmidi_transmit(substream, &b, 1) != 1) {
|
|
port->active = 0;
|
|
break;
|
|
}
|
|
f_midi_transmit_byte(req, port, b);
|
|
}
|
|
|
|
active = !!port->active;
|
|
if (active)
|
|
break;
|
|
}
|
|
midi->in_last_port = active ? i : 0;
|
|
|
|
if (req->length <= 0)
|
|
goto done;
|
|
|
|
err = usb_ep_queue(ep, req, GFP_ATOMIC);
|
|
if (err < 0) {
|
|
ERROR(midi, "%s failed to queue req: %d\n",
|
|
midi->in_ep->name, err);
|
|
req->length = 0; /* Re-use request next time. */
|
|
} else {
|
|
/* Upon success, put request at the back of the queue. */
|
|
kfifo_skip(&midi->in_req_fifo);
|
|
kfifo_put(&midi->in_req_fifo, req);
|
|
}
|
|
|
|
done:
|
|
return active;
|
|
}
|
|
|
|
static void f_midi_transmit(struct f_midi *midi)
|
|
{
|
|
struct usb_ep *ep = midi->in_ep;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
/* We only care about USB requests if IN endpoint is enabled */
|
|
if (!ep || !ep->enabled)
|
|
goto drop_out;
|
|
|
|
spin_lock_irqsave(&midi->transmit_lock, flags);
|
|
|
|
do {
|
|
ret = f_midi_do_transmit(midi, ep);
|
|
if (ret < 0) {
|
|
spin_unlock_irqrestore(&midi->transmit_lock, flags);
|
|
goto drop_out;
|
|
}
|
|
} while (ret);
|
|
|
|
spin_unlock_irqrestore(&midi->transmit_lock, flags);
|
|
|
|
return;
|
|
|
|
drop_out:
|
|
f_midi_drop_out_substreams(midi);
|
|
}
|
|
|
|
static void f_midi_in_tasklet(unsigned long data)
|
|
{
|
|
struct f_midi *midi = (struct f_midi *) data;
|
|
f_midi_transmit(midi);
|
|
}
|
|
|
|
static int f_midi_in_open(struct snd_rawmidi_substream *substream)
|
|
{
|
|
struct f_midi *midi = substream->rmidi->private_data;
|
|
struct gmidi_in_port *port;
|
|
|
|
if (substream->number >= midi->in_ports)
|
|
return -EINVAL;
|
|
|
|
VDBG(midi, "%s()\n", __func__);
|
|
port = midi->in_ports_array + substream->number;
|
|
port->substream = substream;
|
|
port->state = STATE_INITIAL;
|
|
return 0;
|
|
}
|
|
|
|
static int f_midi_in_close(struct snd_rawmidi_substream *substream)
|
|
{
|
|
struct f_midi *midi = substream->rmidi->private_data;
|
|
|
|
VDBG(midi, "%s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static void f_midi_in_trigger(struct snd_rawmidi_substream *substream, int up)
|
|
{
|
|
struct f_midi *midi = substream->rmidi->private_data;
|
|
|
|
if (substream->number >= midi->in_ports)
|
|
return;
|
|
|
|
VDBG(midi, "%s() %d\n", __func__, up);
|
|
midi->in_ports_array[substream->number].active = up;
|
|
if (up)
|
|
tasklet_hi_schedule(&midi->tasklet);
|
|
}
|
|
|
|
static int f_midi_out_open(struct snd_rawmidi_substream *substream)
|
|
{
|
|
struct f_midi *midi = substream->rmidi->private_data;
|
|
|
|
if (substream->number >= MAX_PORTS)
|
|
return -EINVAL;
|
|
|
|
VDBG(midi, "%s()\n", __func__);
|
|
midi->out_substream[substream->number] = substream;
|
|
return 0;
|
|
}
|
|
|
|
static int f_midi_out_close(struct snd_rawmidi_substream *substream)
|
|
{
|
|
struct f_midi *midi = substream->rmidi->private_data;
|
|
|
|
VDBG(midi, "%s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static void f_midi_out_trigger(struct snd_rawmidi_substream *substream, int up)
|
|
{
|
|
struct f_midi *midi = substream->rmidi->private_data;
|
|
|
|
VDBG(midi, "%s()\n", __func__);
|
|
|
|
if (up)
|
|
set_bit(substream->number, &midi->out_triggered);
|
|
else
|
|
clear_bit(substream->number, &midi->out_triggered);
|
|
}
|
|
|
|
static struct snd_rawmidi_ops gmidi_in_ops = {
|
|
.open = f_midi_in_open,
|
|
.close = f_midi_in_close,
|
|
.trigger = f_midi_in_trigger,
|
|
};
|
|
|
|
static struct snd_rawmidi_ops gmidi_out_ops = {
|
|
.open = f_midi_out_open,
|
|
.close = f_midi_out_close,
|
|
.trigger = f_midi_out_trigger
|
|
};
|
|
|
|
static inline void f_midi_unregister_card(struct f_midi *midi)
|
|
{
|
|
if (midi->card) {
|
|
snd_card_free(midi->card);
|
|
midi->card = NULL;
|
|
}
|
|
}
|
|
|
|
/* register as a sound "card" */
|
|
static int f_midi_register_card(struct f_midi *midi)
|
|
{
|
|
struct snd_card *card;
|
|
struct snd_rawmidi *rmidi;
|
|
int err;
|
|
static struct snd_device_ops ops = {
|
|
.dev_free = f_midi_snd_free,
|
|
};
|
|
|
|
err = snd_card_new(&midi->gadget->dev, midi->index, midi->id,
|
|
THIS_MODULE, 0, &card);
|
|
if (err < 0) {
|
|
ERROR(midi, "snd_card_new() failed\n");
|
|
goto fail;
|
|
}
|
|
midi->card = card;
|
|
|
|
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, midi, &ops);
|
|
if (err < 0) {
|
|
ERROR(midi, "snd_device_new() failed: error %d\n", err);
|
|
goto fail;
|
|
}
|
|
|
|
strcpy(card->driver, f_midi_longname);
|
|
strcpy(card->longname, f_midi_longname);
|
|
strcpy(card->shortname, f_midi_shortname);
|
|
|
|
/* Set up rawmidi */
|
|
snd_component_add(card, "MIDI");
|
|
err = snd_rawmidi_new(card, card->longname, 0,
|
|
midi->out_ports, midi->in_ports, &rmidi);
|
|
if (err < 0) {
|
|
ERROR(midi, "snd_rawmidi_new() failed: error %d\n", err);
|
|
goto fail;
|
|
}
|
|
midi->rmidi = rmidi;
|
|
midi->in_last_port = 0;
|
|
strcpy(rmidi->name, card->shortname);
|
|
rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
|
|
SNDRV_RAWMIDI_INFO_INPUT |
|
|
SNDRV_RAWMIDI_INFO_DUPLEX;
|
|
rmidi->private_data = midi;
|
|
|
|
/*
|
|
* Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT.
|
|
* It's an upside-down world being a gadget.
|
|
*/
|
|
snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops);
|
|
snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops);
|
|
|
|
/* register it - we're ready to go */
|
|
err = snd_card_register(card);
|
|
if (err < 0) {
|
|
ERROR(midi, "snd_card_register() failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
VDBG(midi, "%s() finished ok\n", __func__);
|
|
return 0;
|
|
|
|
fail:
|
|
f_midi_unregister_card(midi);
|
|
return err;
|
|
}
|
|
|
|
/* MIDI function driver setup/binding */
|
|
|
|
static int f_midi_bind(struct usb_configuration *c, struct usb_function *f)
|
|
{
|
|
struct usb_descriptor_header **midi_function;
|
|
struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS];
|
|
struct usb_midi_in_jack_descriptor jack_in_emb_desc[MAX_PORTS];
|
|
struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS];
|
|
struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc[MAX_PORTS];
|
|
struct usb_composite_dev *cdev = c->cdev;
|
|
struct f_midi *midi = func_to_midi(f);
|
|
struct usb_string *us;
|
|
int status, n, jack = 1, i = 0;
|
|
|
|
midi->gadget = cdev->gadget;
|
|
tasklet_init(&midi->tasklet, f_midi_in_tasklet, (unsigned long) midi);
|
|
status = f_midi_register_card(midi);
|
|
if (status < 0)
|
|
goto fail_register;
|
|
|
|
/* maybe allocate device-global string ID */
|
|
us = usb_gstrings_attach(c->cdev, midi_strings,
|
|
ARRAY_SIZE(midi_string_defs));
|
|
if (IS_ERR(us)) {
|
|
status = PTR_ERR(us);
|
|
goto fail;
|
|
}
|
|
ac_interface_desc.iInterface = us[STRING_FUNC_IDX].id;
|
|
|
|
/* We have two interfaces, AudioControl and MIDIStreaming */
|
|
status = usb_interface_id(c, f);
|
|
if (status < 0)
|
|
goto fail;
|
|
ac_interface_desc.bInterfaceNumber = status;
|
|
|
|
status = usb_interface_id(c, f);
|
|
if (status < 0)
|
|
goto fail;
|
|
ms_interface_desc.bInterfaceNumber = status;
|
|
ac_header_desc.baInterfaceNr[0] = status;
|
|
midi->ms_id = status;
|
|
|
|
status = -ENODEV;
|
|
|
|
/* allocate instance-specific endpoints */
|
|
midi->in_ep = usb_ep_autoconfig(cdev->gadget, &bulk_in_desc);
|
|
if (!midi->in_ep)
|
|
goto fail;
|
|
|
|
midi->out_ep = usb_ep_autoconfig(cdev->gadget, &bulk_out_desc);
|
|
if (!midi->out_ep)
|
|
goto fail;
|
|
|
|
/* allocate temporary function list */
|
|
midi_function = kcalloc((MAX_PORTS * 4) + 9, sizeof(*midi_function),
|
|
GFP_KERNEL);
|
|
if (!midi_function) {
|
|
status = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* construct the function's descriptor set. As the number of
|
|
* input and output MIDI ports is configurable, we have to do
|
|
* it that way.
|
|
*/
|
|
|
|
/* add the headers - these are always the same */
|
|
midi_function[i++] = (struct usb_descriptor_header *) &ac_interface_desc;
|
|
midi_function[i++] = (struct usb_descriptor_header *) &ac_header_desc;
|
|
midi_function[i++] = (struct usb_descriptor_header *) &ms_interface_desc;
|
|
|
|
/* calculate the header's wTotalLength */
|
|
n = USB_DT_MS_HEADER_SIZE
|
|
+ (midi->in_ports + midi->out_ports) *
|
|
(USB_DT_MIDI_IN_SIZE + USB_DT_MIDI_OUT_SIZE(1));
|
|
ms_header_desc.wTotalLength = cpu_to_le16(n);
|
|
|
|
midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc;
|
|
|
|
/* configure the external IN jacks, each linked to an embedded OUT jack */
|
|
for (n = 0; n < midi->in_ports; n++) {
|
|
struct usb_midi_in_jack_descriptor *in_ext = &jack_in_ext_desc[n];
|
|
struct usb_midi_out_jack_descriptor_1 *out_emb = &jack_out_emb_desc[n];
|
|
|
|
in_ext->bLength = USB_DT_MIDI_IN_SIZE;
|
|
in_ext->bDescriptorType = USB_DT_CS_INTERFACE;
|
|
in_ext->bDescriptorSubtype = USB_MS_MIDI_IN_JACK;
|
|
in_ext->bJackType = USB_MS_EXTERNAL;
|
|
in_ext->bJackID = jack++;
|
|
in_ext->iJack = 0;
|
|
midi_function[i++] = (struct usb_descriptor_header *) in_ext;
|
|
|
|
out_emb->bLength = USB_DT_MIDI_OUT_SIZE(1);
|
|
out_emb->bDescriptorType = USB_DT_CS_INTERFACE;
|
|
out_emb->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK;
|
|
out_emb->bJackType = USB_MS_EMBEDDED;
|
|
out_emb->bJackID = jack++;
|
|
out_emb->bNrInputPins = 1;
|
|
out_emb->pins[0].baSourcePin = 1;
|
|
out_emb->pins[0].baSourceID = in_ext->bJackID;
|
|
out_emb->iJack = 0;
|
|
midi_function[i++] = (struct usb_descriptor_header *) out_emb;
|
|
|
|
/* link it to the endpoint */
|
|
ms_in_desc.baAssocJackID[n] = out_emb->bJackID;
|
|
}
|
|
|
|
/* configure the external OUT jacks, each linked to an embedded IN jack */
|
|
for (n = 0; n < midi->out_ports; n++) {
|
|
struct usb_midi_in_jack_descriptor *in_emb = &jack_in_emb_desc[n];
|
|
struct usb_midi_out_jack_descriptor_1 *out_ext = &jack_out_ext_desc[n];
|
|
|
|
in_emb->bLength = USB_DT_MIDI_IN_SIZE;
|
|
in_emb->bDescriptorType = USB_DT_CS_INTERFACE;
|
|
in_emb->bDescriptorSubtype = USB_MS_MIDI_IN_JACK;
|
|
in_emb->bJackType = USB_MS_EMBEDDED;
|
|
in_emb->bJackID = jack++;
|
|
in_emb->iJack = 0;
|
|
midi_function[i++] = (struct usb_descriptor_header *) in_emb;
|
|
|
|
out_ext->bLength = USB_DT_MIDI_OUT_SIZE(1);
|
|
out_ext->bDescriptorType = USB_DT_CS_INTERFACE;
|
|
out_ext->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK;
|
|
out_ext->bJackType = USB_MS_EXTERNAL;
|
|
out_ext->bJackID = jack++;
|
|
out_ext->bNrInputPins = 1;
|
|
out_ext->iJack = 0;
|
|
out_ext->pins[0].baSourceID = in_emb->bJackID;
|
|
out_ext->pins[0].baSourcePin = 1;
|
|
midi_function[i++] = (struct usb_descriptor_header *) out_ext;
|
|
|
|
/* link it to the endpoint */
|
|
ms_out_desc.baAssocJackID[n] = in_emb->bJackID;
|
|
}
|
|
|
|
/* configure the endpoint descriptors ... */
|
|
ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports);
|
|
ms_out_desc.bNumEmbMIDIJack = midi->in_ports;
|
|
|
|
ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports);
|
|
ms_in_desc.bNumEmbMIDIJack = midi->out_ports;
|
|
|
|
/* ... and add them to the list */
|
|
midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc;
|
|
midi_function[i++] = (struct usb_descriptor_header *) &ms_out_desc;
|
|
midi_function[i++] = (struct usb_descriptor_header *) &bulk_in_desc;
|
|
midi_function[i++] = (struct usb_descriptor_header *) &ms_in_desc;
|
|
midi_function[i++] = NULL;
|
|
|
|
/*
|
|
* support all relevant hardware speeds... we expect that when
|
|
* hardware is dual speed, all bulk-capable endpoints work at
|
|
* both speeds
|
|
*/
|
|
/* copy descriptors, and track endpoint copies */
|
|
f->fs_descriptors = usb_copy_descriptors(midi_function);
|
|
if (!f->fs_descriptors)
|
|
goto fail_f_midi;
|
|
|
|
if (gadget_is_dualspeed(c->cdev->gadget)) {
|
|
bulk_in_desc.wMaxPacketSize = cpu_to_le16(512);
|
|
bulk_out_desc.wMaxPacketSize = cpu_to_le16(512);
|
|
f->hs_descriptors = usb_copy_descriptors(midi_function);
|
|
if (!f->hs_descriptors)
|
|
goto fail_f_midi;
|
|
|
|
if (gadget_is_superspeed_plus(c->cdev->gadget)) {
|
|
f->ssp_descriptors = usb_copy_descriptors(midi_function);
|
|
if (!f->ssp_descriptors)
|
|
goto fail_f_midi;
|
|
}
|
|
}
|
|
|
|
kfree(midi_function);
|
|
|
|
return 0;
|
|
|
|
fail_f_midi:
|
|
kfree(midi_function);
|
|
usb_free_descriptors(f->hs_descriptors);
|
|
fail:
|
|
f_midi_unregister_card(midi);
|
|
fail_register:
|
|
ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
|
|
|
|
return status;
|
|
}
|
|
|
|
static inline struct f_midi_opts *to_f_midi_opts(struct config_item *item)
|
|
{
|
|
return container_of(to_config_group(item), struct f_midi_opts,
|
|
func_inst.group);
|
|
}
|
|
|
|
static void midi_attr_release(struct config_item *item)
|
|
{
|
|
struct f_midi_opts *opts = to_f_midi_opts(item);
|
|
|
|
usb_put_function_instance(&opts->func_inst);
|
|
}
|
|
|
|
static struct configfs_item_operations midi_item_ops = {
|
|
.release = midi_attr_release,
|
|
};
|
|
|
|
#define F_MIDI_OPT(name, test_limit, limit) \
|
|
static ssize_t f_midi_opts_##name##_show(struct config_item *item, char *page) \
|
|
{ \
|
|
struct f_midi_opts *opts = to_f_midi_opts(item); \
|
|
int result; \
|
|
\
|
|
mutex_lock(&opts->lock); \
|
|
result = sprintf(page, "%d\n", opts->name); \
|
|
mutex_unlock(&opts->lock); \
|
|
\
|
|
return result; \
|
|
} \
|
|
\
|
|
static ssize_t f_midi_opts_##name##_store(struct config_item *item, \
|
|
const char *page, size_t len) \
|
|
{ \
|
|
struct f_midi_opts *opts = to_f_midi_opts(item); \
|
|
int ret; \
|
|
u32 num; \
|
|
\
|
|
mutex_lock(&opts->lock); \
|
|
if (opts->refcnt) { \
|
|
ret = -EBUSY; \
|
|
goto end; \
|
|
} \
|
|
\
|
|
ret = kstrtou32(page, 0, &num); \
|
|
if (ret) \
|
|
goto end; \
|
|
\
|
|
if (test_limit && num > limit) { \
|
|
ret = -EINVAL; \
|
|
goto end; \
|
|
} \
|
|
opts->name = num; \
|
|
ret = len; \
|
|
\
|
|
end: \
|
|
mutex_unlock(&opts->lock); \
|
|
return ret; \
|
|
} \
|
|
\
|
|
CONFIGFS_ATTR(f_midi_opts_, name);
|
|
|
|
F_MIDI_OPT(index, true, SNDRV_CARDS);
|
|
F_MIDI_OPT(buflen, false, 0);
|
|
F_MIDI_OPT(qlen, false, 0);
|
|
F_MIDI_OPT(in_ports, true, MAX_PORTS);
|
|
F_MIDI_OPT(out_ports, true, MAX_PORTS);
|
|
|
|
static ssize_t f_midi_opts_id_show(struct config_item *item, char *page)
|
|
{
|
|
struct f_midi_opts *opts = to_f_midi_opts(item);
|
|
int result;
|
|
|
|
mutex_lock(&opts->lock);
|
|
if (opts->id) {
|
|
result = strlcpy(page, opts->id, PAGE_SIZE);
|
|
} else {
|
|
page[0] = 0;
|
|
result = 0;
|
|
}
|
|
|
|
mutex_unlock(&opts->lock);
|
|
|
|
return result;
|
|
}
|
|
|
|
static ssize_t f_midi_opts_id_store(struct config_item *item,
|
|
const char *page, size_t len)
|
|
{
|
|
struct f_midi_opts *opts = to_f_midi_opts(item);
|
|
int ret;
|
|
char *c;
|
|
|
|
mutex_lock(&opts->lock);
|
|
if (opts->refcnt) {
|
|
ret = -EBUSY;
|
|
goto end;
|
|
}
|
|
|
|
c = kstrndup(page, len, GFP_KERNEL);
|
|
if (!c) {
|
|
ret = -ENOMEM;
|
|
goto end;
|
|
}
|
|
if (opts->id_allocated)
|
|
kfree(opts->id);
|
|
opts->id = c;
|
|
opts->id_allocated = true;
|
|
ret = len;
|
|
end:
|
|
mutex_unlock(&opts->lock);
|
|
return ret;
|
|
}
|
|
|
|
CONFIGFS_ATTR(f_midi_opts_, id);
|
|
|
|
static struct configfs_attribute *midi_attrs[] = {
|
|
&f_midi_opts_attr_index,
|
|
&f_midi_opts_attr_buflen,
|
|
&f_midi_opts_attr_qlen,
|
|
&f_midi_opts_attr_in_ports,
|
|
&f_midi_opts_attr_out_ports,
|
|
&f_midi_opts_attr_id,
|
|
NULL,
|
|
};
|
|
|
|
static struct config_item_type midi_func_type = {
|
|
.ct_item_ops = &midi_item_ops,
|
|
.ct_attrs = midi_attrs,
|
|
.ct_owner = THIS_MODULE,
|
|
};
|
|
|
|
static void f_midi_free_inst(struct usb_function_instance *f)
|
|
{
|
|
struct f_midi_opts *opts;
|
|
|
|
opts = container_of(f, struct f_midi_opts, func_inst);
|
|
|
|
if (opts->id_allocated)
|
|
kfree(opts->id);
|
|
|
|
kfree(opts);
|
|
}
|
|
|
|
#ifdef CONFIG_USB_CONFIGFS_UEVENT
|
|
extern struct device *create_function_device(char *name);
|
|
static ssize_t alsa_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct usb_function_instance *fi_midi = dev_get_drvdata(dev);
|
|
struct f_midi *midi;
|
|
|
|
if (!fi_midi->f)
|
|
dev_warn(dev, "f_midi: function not set\n");
|
|
|
|
if (fi_midi && fi_midi->f) {
|
|
midi = func_to_midi(fi_midi->f);
|
|
if (midi->rmidi && midi->rmidi->card)
|
|
return sprintf(buf, "%d %d\n",
|
|
midi->rmidi->card->number, midi->rmidi->device);
|
|
}
|
|
|
|
/* print PCM card and device numbers */
|
|
return sprintf(buf, "%d %d\n", -1, -1);
|
|
}
|
|
|
|
static DEVICE_ATTR(alsa, S_IRUGO, alsa_show, NULL);
|
|
|
|
static struct device_attribute *alsa_function_attributes[] = {
|
|
&dev_attr_alsa,
|
|
NULL
|
|
};
|
|
|
|
static int create_alsa_device(struct usb_function_instance *fi)
|
|
{
|
|
struct device *dev;
|
|
struct device_attribute **attrs;
|
|
struct device_attribute *attr;
|
|
int err = 0;
|
|
|
|
dev = create_function_device("f_midi");
|
|
if (IS_ERR(dev))
|
|
return PTR_ERR(dev);
|
|
|
|
attrs = alsa_function_attributes;
|
|
if (attrs) {
|
|
while ((attr = *attrs++) && !err)
|
|
err = device_create_file(dev, attr);
|
|
if (err) {
|
|
device_destroy(dev->class, dev->devt);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
dev_set_drvdata(dev, fi);
|
|
return 0;
|
|
}
|
|
#else
|
|
static int create_alsa_device(struct usb_function_instance *fi)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static struct usb_function_instance *f_midi_alloc_inst(void)
|
|
{
|
|
struct f_midi_opts *opts;
|
|
|
|
opts = kzalloc(sizeof(*opts), GFP_KERNEL);
|
|
if (!opts)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
mutex_init(&opts->lock);
|
|
opts->func_inst.free_func_inst = f_midi_free_inst;
|
|
opts->index = SNDRV_DEFAULT_IDX1;
|
|
opts->id = SNDRV_DEFAULT_STR1;
|
|
opts->buflen = 512;
|
|
opts->qlen = 32;
|
|
opts->in_ports = 1;
|
|
opts->out_ports = 1;
|
|
|
|
if (create_alsa_device(&opts->func_inst)) {
|
|
kfree(opts);
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
config_group_init_type_name(&opts->func_inst.group, "",
|
|
&midi_func_type);
|
|
|
|
return &opts->func_inst;
|
|
}
|
|
|
|
static void f_midi_free(struct usb_function *f)
|
|
{
|
|
struct f_midi *midi;
|
|
struct f_midi_opts *opts;
|
|
|
|
midi = func_to_midi(f);
|
|
opts = container_of(f->fi, struct f_midi_opts, func_inst);
|
|
kfree(midi->id);
|
|
mutex_lock(&opts->lock);
|
|
kfifo_free(&midi->in_req_fifo);
|
|
kfree(midi);
|
|
opts->func_inst.f = NULL;
|
|
--opts->refcnt;
|
|
mutex_unlock(&opts->lock);
|
|
}
|
|
|
|
static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f)
|
|
{
|
|
struct usb_composite_dev *cdev = f->config->cdev;
|
|
struct f_midi *midi = func_to_midi(f);
|
|
struct snd_card *card;
|
|
|
|
DBG(cdev, "unbind\n");
|
|
|
|
/* just to be sure */
|
|
f_midi_disable(f);
|
|
|
|
card = midi->card;
|
|
midi->card = NULL;
|
|
if (card)
|
|
snd_card_free(card);
|
|
|
|
usb_free_all_descriptors(f);
|
|
}
|
|
|
|
static struct usb_function *f_midi_alloc(struct usb_function_instance *fi)
|
|
{
|
|
struct f_midi *midi = NULL;
|
|
struct f_midi_opts *opts;
|
|
int status, i;
|
|
|
|
opts = container_of(fi, struct f_midi_opts, func_inst);
|
|
|
|
mutex_lock(&opts->lock);
|
|
/* sanity check */
|
|
if (opts->in_ports > MAX_PORTS || opts->out_ports > MAX_PORTS) {
|
|
status = -EINVAL;
|
|
goto setup_fail;
|
|
}
|
|
|
|
/* allocate and initialize one new instance */
|
|
midi = kzalloc(
|
|
sizeof(*midi) + opts->in_ports * sizeof(*midi->in_ports_array),
|
|
GFP_KERNEL);
|
|
if (!midi) {
|
|
status = -ENOMEM;
|
|
goto setup_fail;
|
|
}
|
|
|
|
for (i = 0; i < opts->in_ports; i++)
|
|
midi->in_ports_array[i].cable = i;
|
|
|
|
/* set up ALSA midi devices */
|
|
midi->id = kstrdup(opts->id, GFP_KERNEL);
|
|
if (opts->id && !midi->id) {
|
|
status = -ENOMEM;
|
|
goto midi_free;
|
|
}
|
|
midi->in_ports = opts->in_ports;
|
|
midi->out_ports = opts->out_ports;
|
|
midi->index = opts->index;
|
|
midi->buflen = opts->buflen;
|
|
midi->qlen = opts->qlen;
|
|
midi->in_last_port = 0;
|
|
|
|
status = kfifo_alloc(&midi->in_req_fifo, midi->qlen, GFP_KERNEL);
|
|
if (status)
|
|
goto midi_free;
|
|
|
|
spin_lock_init(&midi->transmit_lock);
|
|
|
|
++opts->refcnt;
|
|
mutex_unlock(&opts->lock);
|
|
|
|
midi->func.name = "gmidi function";
|
|
midi->func.bind = f_midi_bind;
|
|
midi->func.unbind = f_midi_unbind;
|
|
midi->func.set_alt = f_midi_set_alt;
|
|
midi->func.disable = f_midi_disable;
|
|
midi->func.free_func = f_midi_free;
|
|
|
|
fi->f = &midi->func;
|
|
return &midi->func;
|
|
|
|
midi_free:
|
|
if (midi)
|
|
kfree(midi->id);
|
|
kfree(midi);
|
|
setup_fail:
|
|
mutex_unlock(&opts->lock);
|
|
|
|
return ERR_PTR(status);
|
|
}
|
|
|
|
DECLARE_USB_FUNCTION_INIT(midi, f_midi_alloc_inst, f_midi_alloc);
|