Changes in 4.9.206 ASoC: compress: fix unsigned integer overflow check ASoC: kirkwood: fix external clock probe defer clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume reset: fix reset_control_ops kerneldoc comment clk: at91: avoid sleeping early net: fec: add missed clk_disable_unprepare in remove can: peak_usb: report bus recovery as well can: c_can: D_CAN: c_can_chip_config(): perform a sofware reset on open watchdog: meson: Fix the wrong value of left time scripts/gdb: fix debugging modules compiled with hot/cold partitioning mac80211: fix station inactive_time shortly after boot block: drbd: remove a stray unlock in __drbd_send_protocol() pwm: bcm-iproc: Prevent unloading the driver module while in use scsi: lpfc: Fix dif and first burst use in write commands ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication parisc: Fix serio address output parisc: Fix HP SDC hpa address output arm64: mm: Prevent mismatched 52-bit VA support arm64: smp: Handle errors reported by the firmware PM / AVS: SmartReflex: NULL check before some freeing functions is not needed ARM: ks8695: fix section mismatch warning ACPI / LPSS: Ignore acpi_device_fix_up_power() return value crypto: user - support incremental algorithm dumps mwifiex: fix potential NULL dereference and use after free mwifiex: debugfs: correct histogram spacing, formatting rtl818x: fix potential use after free xfs: require both realtime inodes to mount ubi: Put MTD device after it is not used ubi: Do not drop UBI device reference before using microblaze: adjust the help to the real behavior microblaze: move "... is ready" messages to arch/microblaze/Makefile gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB VSOCK: bind to random port for VMADDR_PORT_ANY mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET btrfs: only track ref_heads in delayed_ref_updates HID: intel-ish-hid: fixes incorrect error handling xen/pciback: Check dev_data before using it pinctrl: xway: fix gpio-hog related boot issues net/mlx5: Continue driver initialization despite debugfs failure KVM: s390: unregister debug feature on failing arch init pinctrl: sh-pfc: sh7264: Fix PFCR3 and PFCR0 register configuration pinctrl: sh-pfc: sh7734: Fix shifted values in IPSR10 HID: doc: fix wrong data structure reference for UHID_OUTPUT dm flakey: Properly corrupt multi-page bios. gfs2: take jdata unstuff into account in do_grow xfs: Align compat attrlist_by_handle with native implementation. xfs: Fix bulkstat compat ioctls on x32 userspace. IB/qib: Fix an error code in qib_sdma_verbs_send() powerpc/book3s/32: fix number of bats in p/v_block_mapped() powerpc/xmon: fix dump_segments() drivers/regulator: fix a missing check of return value serial: max310x: Fix tx_empty() callback openrisc: Fix broken paths to arch/or32 RDMA/srp: Propagate ib_post_send() failures to the SCSI mid-layer scsi: qla2xxx: deadlock by configfs_depend_item scsi: csiostor: fix incorrect dma device in case of vport ath6kl: Only use match sets when firmware supports it ath6kl: Fix off by one error in scan completion powerpc/prom: fix early DEBUG messages powerpc/mm: Make NULL pointer deferences explicit on bad page faults. powerpc/44x/bamboo: Fix PCI range vfio/spapr_tce: Get rid of possible infinite loop powerpc/powernv/eeh/npu: Fix uninitialized variables in opal_pci_eeh_freeze_status drbd: ignore "all zero" peer volume sizes in handshake drbd: reject attach of unsuitable uuids even if connected drbd: do not block when adjusting "disk-options" while IO is frozen drbd: fix print_st_err()'s prototype to match the definition regulator: tps65910: fix a missing check of return value powerpc/83xx: handle machine check caused by watchdog timer powerpc/pseries: Fix node leak in update_lmb_associativity_index() crypto: mxc-scc - fix build warnings on ARM64 pwm: clps711x: Fix period calculation net/net_namespace: Check the return value of register_pernet_subsys() um: Make GCOV depend on !KCOV net: stmicro: fix a missing check of clk_prepare net: dsa: bcm_sf2: Propagate error value from mdio_write atl1e: checking the status of atl1e_write_phy_reg tipc: fix a missing check of genlmsg_put net/wan/fsl_ucc_hdlc: Avoid double free in ucc_hdlc_probe() ocfs2: clear journal dirty flag after shutdown journal vmscan: return NODE_RECLAIM_NOSCAN in node_reclaim() when CONFIG_NUMA is n lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk lib/genalloc.c: use vzalloc_node() to allocate the bitmap drivers/base/platform.c: kmemleak ignore a known leak lib/genalloc.c: include vmalloc.h mtd: Check add_mtd_device() ret code tipc: fix memory leak in tipc_nl_compat_publ_dump net/core/neighbour: tell kmemleak about hash tables net/core/neighbour: fix kmemleak minimal reference count for hash tables sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel decnet: fix DN_IFREQ_SIZE tipc: fix skb may be leaky in tipc_link_input sfc: initialise found bitmap in efx_ef10_mtd_probe net: fix possible overflow in __sk_mem_raise_allocated() sctp: don't compare hb_timer expire date before starting it net: dev: Use unsigned integer as an argument to left-shift iommu/amd: Fix NULL dereference bug in match_hid_uid scsi: libsas: Support SATA PHY connection rate unmatch fixing during discovery ACPI / APEI: Switch estatus pool to use vmalloc memory scsi: libsas: Check SMP PHY control function result powerpc/pseries/dlpar: Fix a missing check in dlpar_parse_cc_property() mtd: Remove a debug trace in mtdpart.c mm, gup: add missing refcount overflow checks on x86 and s390 clk: at91: fix update bit maps on CFG_MOR write staging: rtl8192e: fix potential use after free USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9P mei: bus: prefix device names on bus with the bus name media: v4l2-ctrl: fix flags for DO_WHITE_BALANCE net: macb: fix error format in dev_err() pwm: Clear chip_data in pwm_put() media: atmel: atmel-isc: fix asd memory allocation macvlan: schedule bc_work even if error openvswitch: fix flow command message size slip: Fix use-after-free Read in slip_open openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info() openvswitch: remove another BUG_ON() tipc: fix link name length check sctp: cache netns in sctp_ep_common net: sched: fix `tc -s class show` no bstats on class with nolock subqueues HID: core: check whether Usage Page item is after Usage ID items hwrng: stm32 - fix unbalanced pm_runtime_enable platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer net: fec: fix clock count mis-match Linux 4.9.206 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
303 lines
7.3 KiB
C
303 lines
7.3 KiB
C
/*
|
|
* Marvell Berlin PWM driver
|
|
*
|
|
* Copyright (C) 2015 Marvell Technology Group Ltd.
|
|
*
|
|
* Author: Antoine Tenart <antoine.tenart@free-electrons.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define BERLIN_PWM_EN 0x0
|
|
#define BERLIN_PWM_ENABLE BIT(0)
|
|
#define BERLIN_PWM_CONTROL 0x4
|
|
#define BERLIN_PWM_PRESCALE_MASK 0x7
|
|
#define BERLIN_PWM_PRESCALE_MAX 4096
|
|
#define BERLIN_PWM_INVERT_POLARITY BIT(3)
|
|
#define BERLIN_PWM_DUTY 0x8
|
|
#define BERLIN_PWM_TCNT 0xc
|
|
#define BERLIN_PWM_MAX_TCNT 65535
|
|
|
|
struct berlin_pwm_channel {
|
|
u32 enable;
|
|
u32 ctrl;
|
|
u32 duty;
|
|
u32 tcnt;
|
|
};
|
|
|
|
struct berlin_pwm_chip {
|
|
struct pwm_chip chip;
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
};
|
|
|
|
static inline struct berlin_pwm_chip *to_berlin_pwm_chip(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct berlin_pwm_chip, chip);
|
|
}
|
|
|
|
static const u32 prescaler_table[] = {
|
|
1, 4, 8, 16, 64, 256, 1024, 4096
|
|
};
|
|
|
|
static inline u32 berlin_pwm_readl(struct berlin_pwm_chip *chip,
|
|
unsigned int channel, unsigned long offset)
|
|
{
|
|
return readl_relaxed(chip->base + channel * 0x10 + offset);
|
|
}
|
|
|
|
static inline void berlin_pwm_writel(struct berlin_pwm_chip *chip,
|
|
unsigned int channel, u32 value,
|
|
unsigned long offset)
|
|
{
|
|
writel_relaxed(value, chip->base + channel * 0x10 + offset);
|
|
}
|
|
|
|
static int berlin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct berlin_pwm_channel *channel;
|
|
|
|
channel = kzalloc(sizeof(*channel), GFP_KERNEL);
|
|
if (!channel)
|
|
return -ENOMEM;
|
|
|
|
return pwm_set_chip_data(pwm, channel);
|
|
}
|
|
|
|
static void berlin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct berlin_pwm_channel *channel = pwm_get_chip_data(pwm);
|
|
|
|
kfree(channel);
|
|
}
|
|
|
|
static int berlin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm_dev,
|
|
int duty_ns, int period_ns)
|
|
{
|
|
struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip);
|
|
unsigned int prescale;
|
|
u32 value, duty, period;
|
|
u64 cycles, tmp;
|
|
|
|
cycles = clk_get_rate(pwm->clk);
|
|
cycles *= period_ns;
|
|
do_div(cycles, NSEC_PER_SEC);
|
|
|
|
for (prescale = 0; prescale < ARRAY_SIZE(prescaler_table); prescale++) {
|
|
tmp = cycles;
|
|
do_div(tmp, prescaler_table[prescale]);
|
|
|
|
if (tmp <= BERLIN_PWM_MAX_TCNT)
|
|
break;
|
|
}
|
|
|
|
if (tmp > BERLIN_PWM_MAX_TCNT)
|
|
return -ERANGE;
|
|
|
|
period = tmp;
|
|
cycles = tmp * duty_ns;
|
|
do_div(cycles, period_ns);
|
|
duty = cycles;
|
|
|
|
value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_CONTROL);
|
|
value &= ~BERLIN_PWM_PRESCALE_MASK;
|
|
value |= prescale;
|
|
berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_CONTROL);
|
|
|
|
berlin_pwm_writel(pwm, pwm_dev->hwpwm, duty, BERLIN_PWM_DUTY);
|
|
berlin_pwm_writel(pwm, pwm_dev->hwpwm, period, BERLIN_PWM_TCNT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int berlin_pwm_set_polarity(struct pwm_chip *chip,
|
|
struct pwm_device *pwm_dev,
|
|
enum pwm_polarity polarity)
|
|
{
|
|
struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip);
|
|
u32 value;
|
|
|
|
value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_CONTROL);
|
|
|
|
if (polarity == PWM_POLARITY_NORMAL)
|
|
value &= ~BERLIN_PWM_INVERT_POLARITY;
|
|
else
|
|
value |= BERLIN_PWM_INVERT_POLARITY;
|
|
|
|
berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int berlin_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm_dev)
|
|
{
|
|
struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip);
|
|
u32 value;
|
|
|
|
value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_EN);
|
|
value |= BERLIN_PWM_ENABLE;
|
|
berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void berlin_pwm_disable(struct pwm_chip *chip,
|
|
struct pwm_device *pwm_dev)
|
|
{
|
|
struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip);
|
|
u32 value;
|
|
|
|
value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_EN);
|
|
value &= ~BERLIN_PWM_ENABLE;
|
|
berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_EN);
|
|
}
|
|
|
|
static const struct pwm_ops berlin_pwm_ops = {
|
|
.request = berlin_pwm_request,
|
|
.free = berlin_pwm_free,
|
|
.config = berlin_pwm_config,
|
|
.set_polarity = berlin_pwm_set_polarity,
|
|
.enable = berlin_pwm_enable,
|
|
.disable = berlin_pwm_disable,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id berlin_pwm_match[] = {
|
|
{ .compatible = "marvell,berlin-pwm" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, berlin_pwm_match);
|
|
|
|
static int berlin_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct berlin_pwm_chip *pwm;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
|
|
if (!pwm)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pwm->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(pwm->base))
|
|
return PTR_ERR(pwm->base);
|
|
|
|
pwm->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(pwm->clk))
|
|
return PTR_ERR(pwm->clk);
|
|
|
|
ret = clk_prepare_enable(pwm->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pwm->chip.dev = &pdev->dev;
|
|
pwm->chip.ops = &berlin_pwm_ops;
|
|
pwm->chip.base = -1;
|
|
pwm->chip.npwm = 4;
|
|
pwm->chip.can_sleep = true;
|
|
pwm->chip.of_xlate = of_pwm_xlate_with_flags;
|
|
pwm->chip.of_pwm_n_cells = 3;
|
|
|
|
ret = pwmchip_add(&pwm->chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
|
|
clk_disable_unprepare(pwm->clk);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, pwm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int berlin_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct berlin_pwm_chip *pwm = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = pwmchip_remove(&pwm->chip);
|
|
clk_disable_unprepare(pwm->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int berlin_pwm_suspend(struct device *dev)
|
|
{
|
|
struct berlin_pwm_chip *pwm = dev_get_drvdata(dev);
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < pwm->chip.npwm; i++) {
|
|
struct berlin_pwm_channel *channel;
|
|
|
|
channel = pwm_get_chip_data(&pwm->chip.pwms[i]);
|
|
if (!channel)
|
|
continue;
|
|
|
|
channel->enable = berlin_pwm_readl(pwm, i, BERLIN_PWM_ENABLE);
|
|
channel->ctrl = berlin_pwm_readl(pwm, i, BERLIN_PWM_CONTROL);
|
|
channel->duty = berlin_pwm_readl(pwm, i, BERLIN_PWM_DUTY);
|
|
channel->tcnt = berlin_pwm_readl(pwm, i, BERLIN_PWM_TCNT);
|
|
}
|
|
|
|
clk_disable_unprepare(pwm->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int berlin_pwm_resume(struct device *dev)
|
|
{
|
|
struct berlin_pwm_chip *pwm = dev_get_drvdata(dev);
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(pwm->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < pwm->chip.npwm; i++) {
|
|
struct berlin_pwm_channel *channel;
|
|
|
|
channel = pwm_get_chip_data(&pwm->chip.pwms[i]);
|
|
if (!channel)
|
|
continue;
|
|
|
|
berlin_pwm_writel(pwm, i, channel->ctrl, BERLIN_PWM_CONTROL);
|
|
berlin_pwm_writel(pwm, i, channel->duty, BERLIN_PWM_DUTY);
|
|
berlin_pwm_writel(pwm, i, channel->tcnt, BERLIN_PWM_TCNT);
|
|
berlin_pwm_writel(pwm, i, channel->enable, BERLIN_PWM_ENABLE);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(berlin_pwm_pm_ops, berlin_pwm_suspend,
|
|
berlin_pwm_resume);
|
|
|
|
static struct platform_driver berlin_pwm_driver = {
|
|
.probe = berlin_pwm_probe,
|
|
.remove = berlin_pwm_remove,
|
|
.driver = {
|
|
.name = "berlin-pwm",
|
|
.of_match_table = berlin_pwm_match,
|
|
.pm = &berlin_pwm_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(berlin_pwm_driver);
|
|
|
|
MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Marvell Berlin PWM driver");
|
|
MODULE_LICENSE("GPL v2");
|