Changes in 4.9.276 ALSA: usb-audio: fix rate on Ozone Z90 USB headset media: dvb-usb: fix wrong definition Input: usbtouchscreen - fix control-request directions net: can: ems_usb: fix use-after-free in ems_usb_disconnect() usb: gadget: eem: fix echo command packet response issue USB: cdc-acm: blacklist Heimann USB Appset device ntfs: fix validity check for file name attribute iov_iter_fault_in_readable() should do nothing in xarray case Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl ARM: dts: at91: sama5d4: fix pinctrl muxing btrfs: clear defrag status of a root if starting transaction fails ext4: fix kernel infoleak via ext4_extent_header ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit ext4: remove check for zero nr_to_scan in ext4_es_scan() ext4: fix avefreec in find_group_orlov SUNRPC: Fix the batch tasks count wraparound. SUNRPC: Should wake up the privileged task firstly. s390/cio: dont call css_wait_for_slow_path() inside a lock iio: ltr501: mark register holding upper 8 bits of ALS_DATA{0,1} and PS_DATA as volatile, too iio: ltr501: ltr559: fix initialization of LTR501_ALS_CONTR iio: ltr501: ltr501_read_ps(): add missing endianness conversion serial: sh-sci: Stop dmaengine transfer in sci_stop_tx() serial_cs: Add Option International GSM-Ready 56K/ISDN modem serial_cs: remove wrong GLOBETROTTER.cis entry ath9k: Fix kernel NULL pointer dereference during ath_reset_internal() ssb: sdio: Don't overwrite const buffer if block_write fails seq_buf: Make trace_seq_putmem_hex() support data longer than 8 fuse: check connected before queueing on fpq->io spi: spi-loopback-test: Fix 'tx_buf' might be 'rx_buf' spi: spi-topcliff-pch: Fix potential double free in pch_spi_process_messages() spi: omap-100k: Fix the length judgment problem crypto: nx - add missing MODULE_DEVICE_TABLE media: cpia2: fix memory leak in cpia2_usb_probe media: cobalt: fix race condition in setting HPD media: pvrusb2: fix warning in pvr2_i2c_core_done crypto: qat - check return code of qat_hal_rd_rel_reg() crypto: qat - remove unused macro in FW loader media: v4l2-core: Avoid the dangling pointer in v4l2_fh_release media: bt8xx: Fix a missing check bug in bt878_probe media: st-hva: Fix potential NULL pointer dereferences mmc: via-sdmmc: add a check against NULL pointer dereference crypto: shash - avoid comparing pointers to exported functions under CFI media: dvb_net: avoid speculation from net slot media: siano: fix device register error path btrfs: abort transaction if we fail to update the delayed inode btrfs: disable build on platforms having page size 256K regulator: da9052: Ensure enough delay time for .set_voltage_time_sel ACPI: processor idle: Fix up C-state latency if not ordered block_dump: remove block_dump feature in mark_inode_dirty() fs: dlm: cancel work sync othercon random32: Fix implicit truncation warning in prandom_seed_state() fs: dlm: fix memory leak when fenced ACPI: bus: Call kobject_put() in acpi_init() error path platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard() ACPI: tables: Add custom DSDT file as makefile prerequisite ia64: mca_drv: fix incorrect array size calculation media: s5p_cec: decrement usage count if disabled crypto: ixp4xx - dma_unmap the correct address crypto: ux500 - Fix error return code in hash_hw_final() sata_highbank: fix deferred probing pata_rb532_cf: fix deferred probing media: I2C: change 'RST' to "RSET" to fix multiple build errors pata_octeon_cf: avoid WARN_ON() in ata_host_activate() pata_ep93xx: fix deferred probing media: tc358743: Fix error return code in tc358743_probe_of() media: siano: Fix out-of-bounds warnings in smscore_load_firmware_family2() mmc: usdhi6rol0: fix error return code in usdhi6_probe() media: s5p-g2d: Fix a memory leak on ctx->fh.m2m_ctx hwmon: (max31722) Remove non-standard ACPI device IDs hwmon: (max31790) Fix fan speed reporting for fan7..12 spi: spi-sun6i: Fix chipselect/clock bug crypto: nx - Fix RCU warning in nx842_OF_upd_status ACPI: sysfs: Fix a buffer overrun problem with description_show() ocfs2: fix snprintf() checking net: pch_gbe: Propagate error from devm_gpio_request_one() ehea: fix error return code in ehea_restart_qps() RDMA/rxe: Fix failure during driver load drm: qxl: ensure surf.data is ininitialized wireless: carl9170: fix LEDS build errors & warnings brcmsmac: mac80211_if: Fix a resource leak in an error handling path ath10k: Fix an error code in ath10k_add_interface() netlabel: Fix memory leak in netlbl_mgmt_add_common netfilter: nft_exthdr: check for IPv6 packet before further processing net: ethernet: aeroflex: fix UAF in greth_of_remove net: ethernet: ezchip: fix UAF in nps_enet_remove net: ethernet: ezchip: fix error handling vxlan: add missing rcu_read_lock() in neigh_reduce() i40e: Fix error handling in i40e_vsi_open Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_valid writeback: fix obtain a reference to a freeing memcg css net: sched: fix warning in tcindex_alloc_perfect_hash tty: nozomi: Fix a resource leak in an error handling function iio: adis_buffer: do not return ints in irq handlers iio: accel: bma180: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: accel: bma220: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: accel: kxcjk-1013: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: accel: stk8312: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: accel: stk8ba50: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: adc: ti-ads1015: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: adc: vf610: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: gyro: bmg160: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: humidity: am2315: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: prox: pulsed-light: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: light: isl29125: Fix buffer alignment in iio_push_to_buffers_with_timestamp() iio: light: tcs3414: Fix buffer alignment in iio_push_to_buffers_with_timestamp() Input: hil_kbd - fix error return code in hil_dev_connect() char: pcmcia: error out if 'num_bytes_read' is greater than 4 in set_protocol() tty: nozomi: Fix the error handling path of 'nozomi_card_init()' scsi: FlashPoint: Rename si_flags field s390: appldata depends on PROC_SYSCTL staging: gdm724x: check for buffer overflow in gdm_lte_multi_sdu_pkt() staging: gdm724x: check for overflow in gdm_lte_netif_rx() of: Fix truncation of memory sizes on 32-bit platforms scsi: mpt3sas: Fix error return value in _scsih_expander_add() phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe() extcon: sm5502: Drop invalid register write in sm5502_reg_data extcon: max8997: Add missing modalias string configfs: fix memleak in configfs_release_bin_file leds: ktd2692: Fix an error handling path mm/huge_memory.c: don't discard hugepage if other processes are mapping it selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random mmc: vub3000: fix control-request direction scsi: core: Retry I/O for Notify (Enable Spinup) Required error net: pch_gbe: Use proper accessors to BE data in pch_ptp_match() hugetlb: clear huge pte during flush function on mips platform atm: iphase: fix possible use-after-free in ia_module_exit() mISDN: fix possible use-after-free in HFC_cleanup() atm: nicstar: Fix possible use-after-free in nicstar_cleanup() net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT reiserfs: add check for invalid 1st journal block drm/virtio: Fix double free on probe failure udf: Fix NULL pointer dereference in udf_symlink function e100: handle eeprom as little endian clk: tegra: Ensure that PLLU configuration is applied properly ipv6: use prandom_u32() for ID generation RDMA/cxgb4: Fix missing error code in create_qp() dm space maps: don't reset space map allocation cursor when committing net: micrel: check return value after calling platform_get_resource() fjes: check return value after calling platform_get_resource() selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC xfrm: Fix error reporting in xfrm_state_construct. wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP wl1251: Fix possible buffer overflow in wl1251_cmd_scan cw1200: add missing MODULE_DEVICE_TABLE MIPS: add PMD table accounting into MIPS'pmd_alloc_one atm: nicstar: use 'dma_free_coherent' instead of 'kfree' atm: nicstar: register the interrupt handler in the right place RDMA/rxe: Don't overwrite errno from ib_umem_get() sfc: avoid double pci_remove of VFs sfc: error code if SRIOV cannot be disabled wireless: wext-spy: Fix out-of-bounds warning RDMA/cma: Fix rdma_resolve_route() memory leak Bluetooth: Fix the HCI to MGMT status conversion table Bluetooth: Shutdown controller after workqueues are flushed or cancelled Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc. sctp: add size validation when walking chunks fuse: reject internal errno can: gw: synchronize rcu operations before removing gw job entry can: bcm: delay release of struct bcm_op after synchronize_rcu() mac80211: fix memory corruption in EAPOL handling powerpc/barrier: Avoid collision with clang's __lwsync macro pinctrl/amd: Add device HID for new AMD GPIO controller mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode mmc: core: clear flags before allowing to retune ata: ahci_sunxi: Disable DIPM ASoC: tegra: Set driver_name=tegra for all machine drivers qemu_fw_cfg: Make fw_cfg_rev_attr a proper kobj_attribute ipmi/watchdog: Stop watchdog timer when the current action is 'none' power: supply: ab8500: Fix an old bug seq_buf: Fix overflow in seq_buf_putmem_hex() ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe dm btree remove: assign new_root only when removal succeeds media: dtv5100: fix control-request directions media: zr364xx: fix memory leak in zr364xx_start_readpipe media: gspca/sq905: fix control-request direction media: gspca/sunplus: fix zero-length control requests media: uvcvideo: Fix pixel format change for Elgato Cam Link 4K jfs: fix GPF in diFree smackfs: restrict bytes count in smk_set_cipso() KVM: x86: Use guest MAXPHYADDR from CPUID.0x8000_0008 iff TDP is enabled KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run() scsi: core: Fix bad pointer dereference when ehandler kthread is invalid tracing: Do not reference char * as a string in histograms fscrypt: don't ignore minor_hash when hash is 0 tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero misc/libmasm/module: Fix two use after free in ibmasm_init_one Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro" scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology tty: serial: 8250: serial_cs: Fix a memory leak in error handling path fs/jfs: Fix missing error code in lmLogInit() scsi: iscsi: Add iscsi_cls_conn refcount helpers mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE s390/sclp_vt220: fix console name to match device ALSA: sb: Fix potential double-free of CSP mixer elements powerpc/ps3: Add dma_mask to ps3_dma_region gpio: zynq: Check return value of pm_runtime_get_sync ALSA: ppc: fix error return code in snd_pmac_probe() selftests/powerpc: Fix "no_handler" EBB selftest ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing() ALSA: bebob: add support for ToneWeal FW66 usb: gadget: f_hid: fix endianness issue with descriptors usb: gadget: hid: fix error return code in hid_bind() powerpc/boot: Fixup device-tree on little endian backlight: lm3630a: Fix return code of .update_status() callback ALSA: hda: Add IRQ check for platform_get_irq() i2c: core: Disable client irq on reboot/shutdown lib/decompress_unlz4.c: correctly handle zero-padding around initrds. pwm: spear: Don't modify HW state in .remove callback power: supply: ab8500: Avoid NULL pointers power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1 watchdog: Fix possible use-after-free in wdt_startup() watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff() watchdog: Fix possible use-after-free by calling del_timer_sync() x86/fpu: Return proper error codes from user access functions orangefs: fix orangefs df output. ceph: remove bogus checks and WARN_ONs from ceph_set_page_dirty power: supply: charger-manager: add missing MODULE_DEVICE_TABLE power: supply: ab8500: add missing MODULE_DEVICE_TABLE pwm: tegra: Don't modify HW state in .remove callback ACPI: AMBA: Fix resource name in /proc/iomem virtio-blk: Fix memory leak among suspend/resume procedure virtio_console: Assure used length from device is limited PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun power: supply: rt5033_battery: Fix device tree enumeration um: fix error return code in slip_open() um: fix error return code in winch_tramp() watchdog: aspeed: fix hardware timeout calculation nfs: fix acl memory leak of posix_acl_create() ubifs: Set/Clear I_LINKABLE under i_lock for whiteout inode x86/fpu: Limit xstate copy size in xstateregs_set() ALSA: isa: Fix error return code in snd_cmi8330_probe() hexagon: use common DISCARDS macro ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3 ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4 rtc: fix snprintf() checking in is_rtc_hctosys() ARM: dts: r8a7779, marzen: Fix DU clock names reset: bail if try_module_get() fails memory: fsl_ifc: fix leak of IO mapping on probe failure memory: fsl_ifc: fix leak of private memory on probe failure ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe() mips: always link byteswap helpers into decompressor mips: disable branch profiling in boot/decompress.o MIPS: vdso: Invalid GIC access through VDSO seq_file: disallow extremely large seq buffer allocations Linux 4.9.276 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I595c090068eb1b1934b15a0d54394abc38b4b0cc
518 lines
11 KiB
C
518 lines
11 KiB
C
#include "cmd.h"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include "wl1251.h"
|
|
#include "reg.h"
|
|
#include "io.h"
|
|
#include "ps.h"
|
|
#include "acx.h"
|
|
|
|
/**
|
|
* send command to firmware
|
|
*
|
|
* @wl: wl struct
|
|
* @id: command id
|
|
* @buf: buffer containing the command, must work with dma
|
|
* @len: length of the buffer
|
|
*/
|
|
int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
|
|
{
|
|
struct wl1251_cmd_header *cmd;
|
|
unsigned long timeout;
|
|
u32 intr;
|
|
int ret = 0;
|
|
|
|
cmd = buf;
|
|
cmd->id = id;
|
|
cmd->status = 0;
|
|
|
|
WARN_ON(len % 4 != 0);
|
|
|
|
wl1251_mem_write(wl, wl->cmd_box_addr, buf, len);
|
|
|
|
wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT);
|
|
|
|
intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
|
|
while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) {
|
|
if (time_after(jiffies, timeout)) {
|
|
wl1251_error("command complete timeout");
|
|
ret = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
|
|
msleep(1);
|
|
|
|
intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
|
|
}
|
|
|
|
wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
|
|
WL1251_ACX_INTR_CMD_COMPLETE);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* send test command to firmware
|
|
*
|
|
* @wl: wl struct
|
|
* @buf: buffer containing the command, with all headers, must work with dma
|
|
* @len: length of the buffer
|
|
* @answer: is answer needed
|
|
*/
|
|
int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
|
|
{
|
|
int ret;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd test");
|
|
|
|
ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len);
|
|
|
|
if (ret < 0) {
|
|
wl1251_warning("TEST command failed");
|
|
return ret;
|
|
}
|
|
|
|
if (answer) {
|
|
struct wl1251_command *cmd_answer;
|
|
|
|
/*
|
|
* The test command got in, we can read the answer.
|
|
* The answer would be a wl1251_command, where the
|
|
* parameter array contains the actual answer.
|
|
*/
|
|
wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
|
|
|
|
cmd_answer = buf;
|
|
|
|
if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
|
|
wl1251_error("TEST command answer error: %d",
|
|
cmd_answer->header.status);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* read acx from firmware
|
|
*
|
|
* @wl: wl struct
|
|
* @id: acx id
|
|
* @buf: buffer for the response, including all headers, must work with dma
|
|
* @len: length of buf
|
|
*/
|
|
int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len)
|
|
{
|
|
struct acx_header *acx = buf;
|
|
int ret;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd interrogate");
|
|
|
|
acx->id = id;
|
|
|
|
/* payload length, does not include any headers */
|
|
acx->len = len - sizeof(*acx);
|
|
|
|
ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
|
|
if (ret < 0) {
|
|
wl1251_error("INTERROGATE command failed");
|
|
goto out;
|
|
}
|
|
|
|
/* the interrogate command got in, we can read the answer */
|
|
wl1251_mem_read(wl, wl->cmd_box_addr, buf, len);
|
|
|
|
acx = buf;
|
|
if (acx->cmd.status != CMD_STATUS_SUCCESS)
|
|
wl1251_error("INTERROGATE command error: %d",
|
|
acx->cmd.status);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* write acx value to firmware
|
|
*
|
|
* @wl: wl struct
|
|
* @id: acx id
|
|
* @buf: buffer containing acx, including all headers, must work with dma
|
|
* @len: length of buf
|
|
*/
|
|
int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len)
|
|
{
|
|
struct acx_header *acx = buf;
|
|
int ret;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd configure");
|
|
|
|
acx->id = id;
|
|
|
|
/* payload length, does not include any headers */
|
|
acx->len = len - sizeof(*acx);
|
|
|
|
ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len);
|
|
if (ret < 0) {
|
|
wl1251_warning("CONFIGURE command NOK");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
|
|
void *bitmap, u16 bitmap_len, u8 bitmap_control)
|
|
{
|
|
struct wl1251_cmd_vbm_update *vbm;
|
|
int ret;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd vbm");
|
|
|
|
vbm = kzalloc(sizeof(*vbm), GFP_KERNEL);
|
|
if (!vbm) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
/* Count and period will be filled by the target */
|
|
vbm->tim.bitmap_ctrl = bitmap_control;
|
|
if (bitmap_len > PARTIAL_VBM_MAX) {
|
|
wl1251_warning("cmd vbm len is %d B, truncating to %d",
|
|
bitmap_len, PARTIAL_VBM_MAX);
|
|
bitmap_len = PARTIAL_VBM_MAX;
|
|
}
|
|
memcpy(vbm->tim.pvb_field, bitmap, bitmap_len);
|
|
vbm->tim.identity = identity;
|
|
vbm->tim.length = bitmap_len + 3;
|
|
|
|
vbm->len = cpu_to_le16(bitmap_len + 5);
|
|
|
|
ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm));
|
|
if (ret < 0) {
|
|
wl1251_error("VBM command failed");
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
kfree(vbm);
|
|
return ret;
|
|
}
|
|
|
|
int wl1251_cmd_data_path_rx(struct wl1251 *wl, u8 channel, bool enable)
|
|
{
|
|
struct cmd_enabledisable_path *cmd;
|
|
int ret;
|
|
u16 cmd_rx;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd data path");
|
|
|
|
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
|
|
if (!cmd) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
cmd->channel = channel;
|
|
|
|
if (enable)
|
|
cmd_rx = CMD_ENABLE_RX;
|
|
else
|
|
cmd_rx = CMD_DISABLE_RX;
|
|
|
|
ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
|
|
if (ret < 0) {
|
|
wl1251_error("rx %s cmd for channel %d failed",
|
|
enable ? "start" : "stop", channel);
|
|
goto out;
|
|
}
|
|
|
|
wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d",
|
|
enable ? "start" : "stop", channel);
|
|
|
|
out:
|
|
kfree(cmd);
|
|
return ret;
|
|
}
|
|
|
|
int wl1251_cmd_data_path_tx(struct wl1251 *wl, u8 channel, bool enable)
|
|
{
|
|
struct cmd_enabledisable_path *cmd;
|
|
int ret;
|
|
u16 cmd_tx;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd data path");
|
|
|
|
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
|
|
if (!cmd)
|
|
return -ENOMEM;
|
|
|
|
cmd->channel = channel;
|
|
|
|
if (enable)
|
|
cmd_tx = CMD_ENABLE_TX;
|
|
else
|
|
cmd_tx = CMD_DISABLE_TX;
|
|
|
|
ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
|
|
if (ret < 0)
|
|
wl1251_error("tx %s cmd for channel %d failed",
|
|
enable ? "start" : "stop", channel);
|
|
else
|
|
wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",
|
|
enable ? "start" : "stop", channel);
|
|
|
|
kfree(cmd);
|
|
return ret;
|
|
}
|
|
|
|
int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
|
|
u16 beacon_interval, u8 dtim_interval)
|
|
{
|
|
struct cmd_join *join;
|
|
int ret, i;
|
|
u8 *bssid;
|
|
|
|
join = kzalloc(sizeof(*join), GFP_KERNEL);
|
|
if (!join) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d",
|
|
bss_type == BSS_TYPE_IBSS ? " ibss" : "",
|
|
channel, beacon_interval, dtim_interval);
|
|
|
|
/* Reverse order BSSID */
|
|
bssid = (u8 *) &join->bssid_lsb;
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
bssid[i] = wl->bssid[ETH_ALEN - i - 1];
|
|
|
|
join->rx_config_options = wl->rx_config;
|
|
join->rx_filter_options = wl->rx_filter;
|
|
|
|
join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
|
|
RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
|
|
|
|
join->beacon_interval = beacon_interval;
|
|
join->dtim_interval = dtim_interval;
|
|
join->bss_type = bss_type;
|
|
join->channel = channel;
|
|
join->ctrl = JOIN_CMD_CTRL_TX_FLUSH;
|
|
|
|
ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
|
|
if (ret < 0) {
|
|
wl1251_error("failed to initiate cmd join");
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
kfree(join);
|
|
return ret;
|
|
}
|
|
|
|
int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode)
|
|
{
|
|
struct wl1251_cmd_ps_params *ps_params = NULL;
|
|
int ret = 0;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd set ps mode");
|
|
|
|
ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
|
|
if (!ps_params) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
ps_params->ps_mode = ps_mode;
|
|
ps_params->send_null_data = 1;
|
|
ps_params->retries = 5;
|
|
ps_params->hang_over_period = 128;
|
|
ps_params->null_data_rate = 1; /* 1 Mbps */
|
|
|
|
ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
|
|
sizeof(*ps_params));
|
|
if (ret < 0) {
|
|
wl1251_error("cmd set_ps_mode failed");
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
kfree(ps_params);
|
|
return ret;
|
|
}
|
|
|
|
int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
|
|
size_t len)
|
|
{
|
|
struct cmd_read_write_memory *cmd;
|
|
int ret = 0;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd read memory");
|
|
|
|
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
|
|
if (!cmd) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
WARN_ON(len > MAX_READ_SIZE);
|
|
len = min_t(size_t, len, MAX_READ_SIZE);
|
|
|
|
cmd->addr = addr;
|
|
cmd->size = len;
|
|
|
|
ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
|
|
if (ret < 0) {
|
|
wl1251_error("read memory command failed: %d", ret);
|
|
goto out;
|
|
}
|
|
|
|
/* the read command got in, we can now read the answer */
|
|
wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
|
|
|
|
if (cmd->header.status != CMD_STATUS_SUCCESS)
|
|
wl1251_error("error in read command result: %d",
|
|
cmd->header.status);
|
|
|
|
memcpy(answer, cmd->value, len);
|
|
|
|
out:
|
|
kfree(cmd);
|
|
return ret;
|
|
}
|
|
|
|
int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
|
|
void *buf, size_t buf_len)
|
|
{
|
|
struct wl1251_cmd_packet_template *cmd;
|
|
size_t cmd_len;
|
|
int ret = 0;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id);
|
|
|
|
WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE);
|
|
buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE);
|
|
cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4);
|
|
|
|
cmd = kzalloc(cmd_len, GFP_KERNEL);
|
|
if (!cmd) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
cmd->size = cpu_to_le16(buf_len);
|
|
|
|
if (buf)
|
|
memcpy(cmd->data, buf, buf_len);
|
|
|
|
ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len);
|
|
if (ret < 0) {
|
|
wl1251_warning("cmd set_template failed: %d", ret);
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
kfree(cmd);
|
|
return ret;
|
|
}
|
|
|
|
int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
|
|
struct ieee80211_channel *channels[],
|
|
unsigned int n_channels, unsigned int n_probes)
|
|
{
|
|
struct wl1251_cmd_scan *cmd;
|
|
int i, ret = 0;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd scan channels %d", n_channels);
|
|
|
|
WARN_ON(n_channels > SCAN_MAX_NUM_OF_CHANNELS);
|
|
|
|
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
|
|
if (!cmd)
|
|
return -ENOMEM;
|
|
|
|
cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
|
|
cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN |
|
|
CFG_RX_MGMT_EN |
|
|
CFG_RX_BCN_EN);
|
|
cmd->params.scan_options = 0;
|
|
/*
|
|
* Use high priority scan when not associated to prevent fw issue
|
|
* causing never-ending scans (sometimes 20+ minutes).
|
|
* Note: This bug may be caused by the fw's DTIM handling.
|
|
*/
|
|
if (is_zero_ether_addr(wl->bssid))
|
|
cmd->params.scan_options |= cpu_to_le16(WL1251_SCAN_OPT_PRIORITY_HIGH);
|
|
cmd->params.num_channels = n_channels;
|
|
cmd->params.num_probe_requests = n_probes;
|
|
cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
|
|
cmd->params.tid_trigger = 0;
|
|
|
|
for (i = 0; i < n_channels; i++) {
|
|
cmd->channels[i].min_duration =
|
|
cpu_to_le32(WL1251_SCAN_MIN_DURATION);
|
|
cmd->channels[i].max_duration =
|
|
cpu_to_le32(WL1251_SCAN_MAX_DURATION);
|
|
memset(&cmd->channels[i].bssid_lsb, 0xff, 4);
|
|
memset(&cmd->channels[i].bssid_msb, 0xff, 2);
|
|
cmd->channels[i].early_termination = 0;
|
|
cmd->channels[i].tx_power_att = 0;
|
|
cmd->channels[i].channel = channels[i]->hw_value;
|
|
}
|
|
|
|
if (ssid) {
|
|
int len = clamp_val(ssid_len, 0, IEEE80211_MAX_SSID_LEN);
|
|
|
|
cmd->params.ssid_len = len;
|
|
memcpy(cmd->params.ssid, ssid, len);
|
|
}
|
|
|
|
ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
|
|
if (ret < 0) {
|
|
wl1251_error("cmd scan failed: %d", ret);
|
|
goto out;
|
|
}
|
|
|
|
wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
|
|
|
|
if (cmd->header.status != CMD_STATUS_SUCCESS) {
|
|
wl1251_error("cmd scan status wasn't success: %d",
|
|
cmd->header.status);
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
kfree(cmd);
|
|
return ret;
|
|
}
|
|
|
|
int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout)
|
|
{
|
|
struct wl1251_cmd_trigger_scan_to *cmd;
|
|
int ret;
|
|
|
|
wl1251_debug(DEBUG_CMD, "cmd trigger scan to");
|
|
|
|
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
|
|
if (!cmd)
|
|
return -ENOMEM;
|
|
|
|
cmd->timeout = timeout;
|
|
|
|
ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd));
|
|
if (ret < 0) {
|
|
wl1251_error("cmd trigger scan to failed: %d", ret);
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
kfree(cmd);
|
|
return ret;
|
|
}
|