1
0
Files
kernel-49/drivers/net/can/c_can/c_can_pci.c
Greg Kroah-Hartman 6da7d59d98 Merge 4.9.264 into android-4.9-q
Changes in 4.9.264
	net: fec: ptp: avoid register access when ipg clock is disabled
	powerpc/4xx: Fix build errors from mfdcr()
	atm: eni: dont release is never initialized
	atm: lanai: dont run lanai_dev_close if not open
	ixgbe: Fix memleak in ixgbe_configure_clsu32
	net: tehuti: fix error return code in bdx_probe()
	sun/niu: fix wrong RXMAC_BC_FRM_CNT_COUNT count
	nfs: fix PNFS_FLEXFILE_LAYOUT Kconfig default
	NFS: Correct size calculation for create reply length
	net: wan: fix error return code of uhdlc_init()
	atm: uPD98402: fix incorrect allocation
	atm: idt77252: fix null-ptr-dereference
	u64_stats,lockdep: Fix u64_stats_init() vs lockdep
	nfs: we don't support removing system.nfs4_acl
	ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls
	ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign
	x86/tlb: Flush global mappings when KAISER is disabled
	squashfs: fix inode lookup sanity checks
	squashfs: fix xattr id and id lookup sanity checks
	arm64: dts: ls1043a: mark crypto engine dma coherent
	bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
	macvlan: macvlan_count_rx() needs to be aware of preemption
	net: dsa: bcm_sf2: Qualify phydev->dev_flags based on port
	e1000e: add rtnl_lock() to e1000_reset_task
	e1000e: Fix error handling in e1000_set_d0_lplu_state_82571
	net/qlcnic: Fix a use after free in qlcnic_83xx_get_minidump_template
	can: c_can_pci: c_can_pci_remove(): fix use-after-free
	can: c_can: move runtime PM enable/disable to c_can_platform
	can: m_can: m_can_do_rx_poll(): fix extraneous msg loss warning
	mac80211: fix rate mask reset
	net: cdc-phonet: fix data-interface release on probe failure
	RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server
	ACPI: scan: Rearrange memory allocation in acpi_device_add()
	ACPI: scan: Use unique number for instance_no
	perf auxtrace: Fix auxtrace queue conflict
	idr: add ida_is_empty
	futex: Use smp_store_release() in mark_wake_futex()
	futex,rt_mutex: Introduce rt_mutex_init_waiter()
	futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()
	futex: Drop hb->lock before enqueueing on the rtmutex
	futex: Avoid freeing an active timer
	futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()
	futex: Handle early deadlock return correctly
	futex: Fix (possible) missed wakeup
	locking/futex: Allow low-level atomic operations to return -EAGAIN
	arm64: futex: Bound number of LDXR/STXR loops in FUTEX_WAKE_OP
	futex: Prevent robust futex exit race
	futex: Fix incorrect should_fail_futex() handling
	futex: Handle transient "ownerless" rtmutex state correctly
	can: dev: Move device back to init netns on owning netns delete
	net: sched: validate stab values
	net: qrtr: fix a kernel-infoleak in qrtr_recvmsg()
	mac80211: fix double free in ibss_leave
	xen-blkback: don't leak persistent grants from xen_blkbk_map()
	Linux 4.9.264

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I8c5617c1f82aa378e3ba19d43879065e15457edd
2021-04-12 16:50:41 +03:00

295 lines
6.9 KiB
C

/*
* PCI bus driver for Bosch C_CAN/D_CAN controller
*
* Copyright (C) 2012 Federico Vaga <federico.vaga@gmail.com>
*
* Borrowed from c_can_platform.c
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/can/dev.h>
#include "c_can.h"
#define PCI_DEVICE_ID_PCH_CAN 0x8818
#define PCH_PCI_SOFT_RESET 0x01fc
enum c_can_pci_reg_align {
C_CAN_REG_ALIGN_16,
C_CAN_REG_ALIGN_32,
C_CAN_REG_32,
};
struct c_can_pci_data {
/* Specify if is C_CAN or D_CAN */
enum c_can_dev_id type;
/* Set the register alignment in the memory */
enum c_can_pci_reg_align reg_align;
/* Set the frequency */
unsigned int freq;
/* PCI bar number */
int bar;
/* Callback for reset */
void (*init)(const struct c_can_priv *priv, bool enable);
};
/*
* 16-bit c_can registers can be arranged differently in the memory
* architecture of different implementations. For example: 16-bit
* registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
* Handle the same by providing a common read/write interface.
*/
static u16 c_can_pci_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
enum reg index)
{
return readw(priv->base + priv->regs[index]);
}
static void c_can_pci_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
enum reg index, u16 val)
{
writew(val, priv->base + priv->regs[index]);
}
static u16 c_can_pci_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
enum reg index)
{
return readw(priv->base + 2 * priv->regs[index]);
}
static void c_can_pci_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
enum reg index, u16 val)
{
writew(val, priv->base + 2 * priv->regs[index]);
}
static u16 c_can_pci_read_reg_32bit(const struct c_can_priv *priv,
enum reg index)
{
return (u16)ioread32(priv->base + 2 * priv->regs[index]);
}
static void c_can_pci_write_reg_32bit(const struct c_can_priv *priv,
enum reg index, u16 val)
{
iowrite32((u32)val, priv->base + 2 * priv->regs[index]);
}
static u32 c_can_pci_read_reg32(const struct c_can_priv *priv, enum reg index)
{
u32 val;
val = priv->read_reg(priv, index);
val |= ((u32) priv->read_reg(priv, index + 1)) << 16;
return val;
}
static void c_can_pci_write_reg32(const struct c_can_priv *priv, enum reg index,
u32 val)
{
priv->write_reg(priv, index + 1, val >> 16);
priv->write_reg(priv, index, val);
}
static void c_can_pci_reset_pch(const struct c_can_priv *priv, bool enable)
{
if (enable) {
u32 __iomem *addr = priv->base + PCH_PCI_SOFT_RESET;
/* write to sw reset register */
iowrite32(1, addr);
iowrite32(0, addr);
}
}
static int c_can_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct c_can_pci_data *c_can_pci_data = (void *)ent->driver_data;
struct c_can_priv *priv;
struct net_device *dev;
void __iomem *addr;
int ret;
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "pci_enable_device FAILED\n");
goto out;
}
ret = pci_request_regions(pdev, KBUILD_MODNAME);
if (ret) {
dev_err(&pdev->dev, "pci_request_regions FAILED\n");
goto out_disable_device;
}
ret = pci_enable_msi(pdev);
if (!ret) {
dev_info(&pdev->dev, "MSI enabled\n");
pci_set_master(pdev);
}
addr = pci_iomap(pdev, c_can_pci_data->bar,
pci_resource_len(pdev, c_can_pci_data->bar));
if (!addr) {
dev_err(&pdev->dev,
"device has no PCI memory resources, "
"failing adapter\n");
ret = -ENOMEM;
goto out_release_regions;
}
/* allocate the c_can device */
dev = alloc_c_can_dev();
if (!dev) {
ret = -ENOMEM;
goto out_iounmap;
}
priv = netdev_priv(dev);
pci_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
dev->irq = pdev->irq;
priv->base = addr;
priv->device = &pdev->dev;
if (!c_can_pci_data->freq) {
dev_err(&pdev->dev, "no clock frequency defined\n");
ret = -ENODEV;
goto out_free_c_can;
} else {
priv->can.clock.freq = c_can_pci_data->freq;
}
/* Configure CAN type */
switch (c_can_pci_data->type) {
case BOSCH_C_CAN:
priv->regs = reg_map_c_can;
break;
case BOSCH_D_CAN:
priv->regs = reg_map_d_can;
break;
default:
ret = -EINVAL;
goto out_free_c_can;
}
priv->type = c_can_pci_data->type;
/* Configure access to registers */
switch (c_can_pci_data->reg_align) {
case C_CAN_REG_ALIGN_32:
priv->read_reg = c_can_pci_read_reg_aligned_to_32bit;
priv->write_reg = c_can_pci_write_reg_aligned_to_32bit;
break;
case C_CAN_REG_ALIGN_16:
priv->read_reg = c_can_pci_read_reg_aligned_to_16bit;
priv->write_reg = c_can_pci_write_reg_aligned_to_16bit;
break;
case C_CAN_REG_32:
priv->read_reg = c_can_pci_read_reg_32bit;
priv->write_reg = c_can_pci_write_reg_32bit;
break;
default:
ret = -EINVAL;
goto out_free_c_can;
}
priv->read_reg32 = c_can_pci_read_reg32;
priv->write_reg32 = c_can_pci_write_reg32;
priv->raminit = c_can_pci_data->init;
ret = register_c_can_dev(dev);
if (ret) {
dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
KBUILD_MODNAME, ret);
goto out_free_c_can;
}
dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
KBUILD_MODNAME, priv->regs, dev->irq);
return 0;
out_free_c_can:
free_c_can_dev(dev);
out_iounmap:
pci_iounmap(pdev, addr);
out_release_regions:
pci_disable_msi(pdev);
pci_clear_master(pdev);
pci_release_regions(pdev);
out_disable_device:
pci_disable_device(pdev);
out:
return ret;
}
static void c_can_pci_remove(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct c_can_priv *priv = netdev_priv(dev);
void __iomem *addr = priv->base;
unregister_c_can_dev(dev);
free_c_can_dev(dev);
pci_iounmap(pdev, addr);
pci_disable_msi(pdev);
pci_clear_master(pdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
static struct c_can_pci_data c_can_sta2x11= {
.type = BOSCH_C_CAN,
.reg_align = C_CAN_REG_ALIGN_32,
.freq = 52000000, /* 52 Mhz */
.bar = 0,
};
static struct c_can_pci_data c_can_pch = {
.type = BOSCH_C_CAN,
.reg_align = C_CAN_REG_32,
.freq = 50000000, /* 50 MHz */
.init = c_can_pci_reset_pch,
.bar = 1,
};
#define C_CAN_ID(_vend, _dev, _driverdata) { \
PCI_DEVICE(_vend, _dev), \
.driver_data = (unsigned long)&_driverdata, \
}
static const struct pci_device_id c_can_pci_tbl[] = {
C_CAN_ID(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_CAN,
c_can_sta2x11),
C_CAN_ID(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_CAN,
c_can_pch),
{},
};
static struct pci_driver c_can_pci_driver = {
.name = KBUILD_MODNAME,
.id_table = c_can_pci_tbl,
.probe = c_can_pci_probe,
.remove = c_can_pci_remove,
};
module_pci_driver(c_can_pci_driver);
MODULE_AUTHOR("Federico Vaga <federico.vaga@gmail.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("PCI CAN bus driver for Bosch C_CAN/D_CAN controller");
MODULE_DEVICE_TABLE(pci, c_can_pci_tbl);