1
0
Files
kernel-49/drivers/media/usb/dvb-usb/nova-t-usb2.c
Greg Kroah-Hartman fc73f0764a Merge 4.9.283 into android-4.9-q
Changes in 4.9.283
	ext4: fix race writing to an inline_data file while its xattrs are changing
	mtd: nand: atmel_nand: remove build warning in atmel_nand_remove()
	xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG
	qed: Fix the VF msix vectors flow
	qede: Fix memset corruption
	perf/x86/amd/ibs: Work around erratum #1197
	cryptoloop: add a deprecation warning
	ARM: 8918/2: only build return_address() if needed
	ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
	ath: Use safer key clearing with key cache entries
	ath9k: Clear key cache explicitly on disabling hardware
	ath: Export ath_hw_keysetmac()
	ath: Modify ath_key_delete() to not need full key entry
	ath9k: Postpone key cache entry deletion for TXQ frames reference it
	media: stkwebcam: fix memory leak in stk_camera_probe
	igmp: Add ip_mc_list lock in ip_check_mc_rcu
	usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
	USB: serial: mos7720: improve OOM-handling in read_mos_reg()
	net/sched: cls_flower: Use mask for addr_type
	PM / wakeirq: Enable dedicated wakeirq for suspend
	tc358743: fix register i2c_rd/wr function fix
	nvme-pci: Fix an error handling path in 'nvme_probe()'
	gfs2: Don't clear SGID when inheriting ACLs
	ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2)
	s390/disassembler: correct disassembly lines alignment
	mm/kmemleak.c: make cond_resched() rate-limiting more efficient
	crypto: talitos - reduce max key size for SEC1
	powerpc/module64: Fix comment in R_PPC64_ENTRY handling
	powerpc/boot: Delete unneeded .globl _zimage_start
	net: ll_temac: Remove left-over debug message
	mm/page_alloc: speed up the iteration of max_order
	Revert "btrfs: compression: don't try to compress if we don't have enough pages"
	x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions
	PCI: Call Max Payload Size-related fixup quirks early
	regmap: fix the offset of register error log
	crypto: mxs-dcp - Check for DMA mapping errors
	power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors
	crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()
	udf: Check LVID earlier
	power: supply: max17042_battery: fix typo in MAx17042_TOFF
	libata: fix ata_host_start()
	crypto: qat - do not ignore errors from enable_vf2pf_comms()
	crypto: qat - handle both source of interrupt in VF ISR
	crypto: qat - fix reuse of completion variable
	crypto: qat - fix naming for init/shutdown VF to PF notifications
	crypto: qat - do not export adf_iov_putmsg()
	udf_get_extendedattr() had no boundary checks.
	m68k: emu: Fix invalid free in nfeth_cleanup()
	spi: spi-pic32: Fix issue with uninitialized dma_slave_config
	crypto: qat - use proper type for vf_mask
	certs: Trigger creation of RSA module signing key if it's not an RSA key
	media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init
	media: dvb-usb: fix uninit-value in vp702x_read_mac_addr
	media: go7007: remove redundant initialization
	Bluetooth: sco: prevent information leak in sco_conn_defer_accept()
	tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos
	net: cipso: fix warnings in netlbl_cipsov4_add_std
	i2c: highlander: add IRQ check
	PCI: PM: Enable PME if it can be signaled from D3cold
	soc: qcom: smsm: Fix missed interrupts if state changes while masked
	Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow
	arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7
	Bluetooth: fix repeated calls to sco_sock_kill
	drm/msm/dsi: Fix some reference counted resource leaks
	usb: gadget: udc: at91: add IRQ check
	usb: phy: fsl-usb: add IRQ check
	usb: phy: twl6030: add IRQ checks
	Bluetooth: Move shutdown callback before flushing tx and rx queue
	usb: host: ohci-tmio: add IRQ check
	usb: phy: tahvo: add IRQ check
	usb: gadget: mv_u3d: request_irq() after initializing UDC
	Bluetooth: add timeout sanity check to hci_inquiry
	i2c: iop3xx: fix deferred probing
	i2c: s3c2410: fix IRQ check
	mmc: dw_mmc: Fix issue with uninitialized dma_slave_config
	mmc: moxart: Fix issue with uninitialized dma_slave_config
	CIFS: Fix a potencially linear read overflow
	i2c: mt65xx: fix IRQ check
	usb: ehci-orion: Handle errors of clk_prepare_enable() in probe
	ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()
	bcma: Fix memory leak for internally-handled cores
	ipv4: make exception cache less predictible
	tty: Fix data race between tiocsti() and flush_to_ldisc()
	KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
	IMA: remove -Wmissing-prototypes warning
	clk: kirkwood: Fix a clocking boot regression
	fbmem: don't allow too huge resolutions
	rtc: tps65910: Correct driver module alias
	PCI/MSI: Skip masking MSI-X on Xen PV
	powerpc/perf/hv-gpci: Fix counter value parsing
	xen: fix setting of max_pfn in shared_info
	crypto: public_key: fix overflow during implicit conversion
	power: supply: max17042: handle fails of reading status register
	VMCI: fix NULL pointer dereference when unmapping queue pair
	media: uvc: don't do DMA on stack
	media: rc-loopback: return number of emitters rather than error
	libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
	ARM: 9105/1: atags_to_fdt: don't warn about stack size
	PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported
	PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure
	vfio: Use config not menuconfig for VFIO_NOIOMMU
	openrisc: don't printk() unconditionally
	pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
	MIPS: Malta: fix alignment of the devicetree buffer
	crypto: mxs-dcp - Use sg_mapping_iter to copy data
	PCI: Use pci_update_current_state() in pci_enable_device_flags()
	iio: dac: ad5624r: Fix incorrect handling of an optional regulator.
	video: fbdev: kyro: fix a DoS bug by restricting user input
	netlink: Deal with ESRCH error in nlmsg_notify()
	Smack: Fix wrong semantics in smk_access_entry()
	usb: host: fotg210: fix the endpoint's transactional opportunities calculation
	usb: host: fotg210: fix the actual_length of an iso packet
	usb: gadget: u_ether: fix a potential null pointer dereference
	usb: gadget: composite: Allow bMaxPower=0 if self-powered
	staging: board: Fix uninitialized spinlock when attaching genpd
	tty: serial: jsm: hold port lock when reporting modem line changes
	bpf/tests: Fix copy-and-paste error in double word test
	bpf/tests: Do not PASS tests without actually testing the result
	video: fbdev: asiliantfb: Error out if 'pixclock' equals zero
	video: fbdev: kyro: Error out if 'pixclock' equals zero
	video: fbdev: riva: Error out if 'pixclock' equals zero
	ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()
	flow_dissector: Fix out-of-bounds warnings
	s390/jump_label: print real address in a case of a jump label bug
	serial: 8250: Define RX trigger levels for OxSemi 950 devices
	xtensa: ISS: don't panic in rs_init
	hvsi: don't panic on tty_register_driver failure
	serial: 8250_pci: make setup_port() parameters explicitly unsigned
	staging: ks7010: Fix the initialization of the 'sleep_status' structure
	ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
	Bluetooth: skip invalid hci_sync_conn_complete_evt
	ASoC: Intel: bytcr_rt5640: Move "Platform Clock" routes to the maps for the matching in-/output
	net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()
	Bluetooth: avoid circular locks in sco_sock_connect
	gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port()
	ARM: tegra: tamonten: Fix UART pad setting
	rpc: fix gss_svc_init cleanup on failure
	gfs2: Don't call dlm after protocol is unmounted
	mmc: rtsx_pci: Fix long reads when clock is prescaled
	cifs: fix wrong release in sess_alloc_buffer() failed path
	Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"
	usbip: give back URBs for unsent unlink requests during cleanup
	parport: remove non-zero check on count
	ath9k: fix OOB read ar9300_eeprom_restore_internal
	ath9k: fix sleeping in atomic context
	net: fix NULL pointer reference in cipso_v4_doi_free
	net: w5100: check return value after calling platform_get_resource()
	parisc: fix crash with signals and alloca
	scsi: BusLogic: Fix missing pr_cont() use
	mm/hugetlb: initialize hugetlb_usage in mm_init
	memcg: enable accounting for pids in nested pid namespaces
	platform/chrome: cros_ec_proto: Send command again when timeout occurs
	xen: reset legacy rtc flag for PV domU
	bnx2x: Fix enabling network interfaces without VFs
	net-caif: avoid user-triggerable WARN_ON(1)
	ptp: dp83640: don't define PAGE0
	dccp: don't duplicate ccid when cloning dccp sock
	net/l2tp: Fix reference count leak in l2tp_udp_recv_core
	r6040: Restore MDIO clock frequency after MAC reset
	tipc: increase timeout in tipc_sk_enqueue()
	events: Reuse value read using READ_ONCE instead of re-reading it
	net/af_unix: fix a data-race in unix_dgram_poll
	tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
	x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
	dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation
	mfd: Don't use irq_create_mapping() to resolve a mapping
	net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920
	ethtool: Fix an error code in cxgb2.c
	PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n
	mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
	ARC: export clear_user_page() for modules
	net: dsa: b53: Fix calculating number of switch ports
	qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom
	net: renesas: sh_eth: Fix freeing wrong tx descriptor
	s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
	Linux 4.9.283

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I9e2017cce36805d71566ea1f265974a43bae33d1
2021-09-23 10:21:59 +03:00

247 lines
6.1 KiB
C

/* DVB USB framework compliant Linux driver for the Hauppauge WinTV-NOVA-T usb2
* DVB-T receiver.
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
#include "dibusb.h"
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=rc,2=eeprom (|-able))." DVB_USB_DEBUG_STATUS);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define deb_rc(args...) dprintk(debug,0x01,args)
#define deb_ee(args...) dprintk(debug,0x02,args)
/* Hauppauge NOVA-T USB2 keys */
static struct rc_map_table rc_map_haupp_table[] = {
{ 0x1e00, KEY_0 },
{ 0x1e01, KEY_1 },
{ 0x1e02, KEY_2 },
{ 0x1e03, KEY_3 },
{ 0x1e04, KEY_4 },
{ 0x1e05, KEY_5 },
{ 0x1e06, KEY_6 },
{ 0x1e07, KEY_7 },
{ 0x1e08, KEY_8 },
{ 0x1e09, KEY_9 },
{ 0x1e0a, KEY_KPASTERISK },
{ 0x1e0b, KEY_RED },
{ 0x1e0c, KEY_RADIO },
{ 0x1e0d, KEY_MENU },
{ 0x1e0e, KEY_GRAVE }, /* # */
{ 0x1e0f, KEY_MUTE },
{ 0x1e10, KEY_VOLUMEUP },
{ 0x1e11, KEY_VOLUMEDOWN },
{ 0x1e12, KEY_CHANNEL },
{ 0x1e14, KEY_UP },
{ 0x1e15, KEY_DOWN },
{ 0x1e16, KEY_LEFT },
{ 0x1e17, KEY_RIGHT },
{ 0x1e18, KEY_VIDEO },
{ 0x1e19, KEY_AUDIO },
{ 0x1e1a, KEY_IMAGES },
{ 0x1e1b, KEY_EPG },
{ 0x1e1c, KEY_TV },
{ 0x1e1e, KEY_NEXT },
{ 0x1e1f, KEY_BACK },
{ 0x1e20, KEY_CHANNELUP },
{ 0x1e21, KEY_CHANNELDOWN },
{ 0x1e24, KEY_LAST }, /* Skip backwards */
{ 0x1e25, KEY_OK },
{ 0x1e29, KEY_BLUE},
{ 0x1e2e, KEY_GREEN },
{ 0x1e30, KEY_PAUSE },
{ 0x1e32, KEY_REWIND },
{ 0x1e34, KEY_FASTFORWARD },
{ 0x1e35, KEY_PLAY },
{ 0x1e36, KEY_STOP },
{ 0x1e37, KEY_RECORD },
{ 0x1e38, KEY_YELLOW },
{ 0x1e3b, KEY_GOTO },
{ 0x1e3d, KEY_POWER },
};
/* Firmware bug? sometimes, when a new key is pressed, the previous pressed key
* is delivered. No workaround yet, maybe a new firmware.
*/
static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
u8 *buf, data, toggle, custom;
u16 raw;
int i, ret;
struct dibusb_device_state *st = d->priv;
buf = kmalloc(5, GFP_KERNEL);
if (!buf)
return -ENOMEM;
buf[0] = DIBUSB_REQ_POLL_REMOTE;
buf[1] = 0x35;
ret = dvb_usb_generic_rw(d, buf, 2, buf, 5, 0);
if (ret < 0)
goto ret;
*state = REMOTE_NO_KEY_PRESSED;
switch (buf[0]) {
case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED:
raw = ((buf[1] << 8) | buf[2]) >> 3;
toggle = !!(raw & 0x800);
data = raw & 0x3f;
custom = (raw >> 6) & 0x1f;
deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",
buf[1], buf[2], buf[3], custom, data, toggle);
for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) {
if (rc5_data(&rc_map_haupp_table[i]) == data &&
rc5_custom(&rc_map_haupp_table[i]) == custom) {
deb_rc("c: %x, d: %x\n", rc5_data(&rc_map_haupp_table[i]),
rc5_custom(&rc_map_haupp_table[i]));
*event = rc_map_haupp_table[i].keycode;
*state = REMOTE_KEY_PRESSED;
if (st->old_toggle == toggle) {
if (st->last_repeat_count++ < 2)
*state = REMOTE_NO_KEY_PRESSED;
} else {
st->last_repeat_count = 0;
st->old_toggle = toggle;
}
break;
}
}
break;
case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY:
default:
break;
}
ret:
kfree(buf);
return ret;
}
static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6])
{
int i, ret;
u8 b;
mac[0] = 0x00;
mac[1] = 0x0d;
mac[2] = 0xfe;
/* this is a complete guess, but works for my box */
for (i = 136; i < 139; i++) {
ret = dibusb_read_eeprom_byte(d, i, &b);
if (ret)
return ret;
mac[5 - (i - 136)] = b;
}
return 0;
}
/* USB Driver stuff */
static struct dvb_usb_device_properties nova_t_properties;
static int nova_t_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
return dvb_usb_device_init(intf, &nova_t_properties,
THIS_MODULE, NULL, adapter_nr);
}
/* do not change the order of the ID table */
static struct usb_device_id nova_t_table [] = {
/* 00 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_COLD) },
/* 01 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_WARM) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, nova_t_table);
static struct dvb_usb_device_properties nova_t_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-nova-t-usb2-02.fw",
.num_adapters = 1,
.adapter = {
{
.num_frontends = 1,
.fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.streaming_ctrl = dibusb2_0_streaming_ctrl,
.pid_filter = dibusb_pid_filter,
.pid_filter_ctrl = dibusb_pid_filter_ctrl,
.frontend_attach = dibusb_dib3000mc_frontend_attach,
.tuner_attach = dibusb_dib3000mc_tuner_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
.count = 7,
.endpoint = 0x06,
.u = {
.bulk = {
.buffersize = 4096,
}
}
},
}},
.size_of_priv = sizeof(struct dibusb_state),
}
},
.size_of_priv = sizeof(struct dibusb_device_state),
.power_ctrl = dibusb2_0_power_ctrl,
.read_mac_address = nova_t_read_mac_address,
.rc.legacy = {
.rc_interval = 100,
.rc_map_table = rc_map_haupp_table,
.rc_map_size = ARRAY_SIZE(rc_map_haupp_table),
.rc_query = nova_t_rc_query,
},
.i2c_algo = &dibusb_i2c_algo,
.generic_bulk_ctrl_endpoint = 0x01,
.num_device_descs = 1,
.devices = {
{ "Hauppauge WinTV-NOVA-T usb2",
{ &nova_t_table[0], NULL },
{ &nova_t_table[1], NULL },
},
{ NULL },
}
};
static struct usb_driver nova_t_driver = {
.name = "dvb_usb_nova_t_usb2",
.probe = nova_t_probe,
.disconnect = dvb_usb_device_exit,
.id_table = nova_t_table,
};
module_usb_driver(nova_t_driver);
MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Hauppauge WinTV-NOVA-T usb2");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");