Changes in 4.9.318 USB: new quirk for Dell Gen 2 devices ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP ptrace: Reimplement PTRACE_KILL by always sending SIGKILL btrfs: add "0x" prefix for unsupported optional features drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue b43legacy: Fix assigning negative value to unsigned variable b43: Fix assigning negative value to unsigned variable ipw2x00: Fix potential NULL dereference in libipw_xmit() ACPICA: Avoid cache flush inside virtual machines ALSA: jack: Access input_dev under mutex drm/amd/pm: fix double free in si_parse_power_table() ath9k: fix QCA9561 PA bias level media: cx25821: Fix the warning when removing the module scsi: megaraid: Fix error check return value of register_chrdev() drm/amd/pm: fix the compile warning ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL ASoC: dapm: Don't fold register value changes into notifications dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC ipmi:ssif: Check for NULL msg when handling events and messages openrisc: start CPU timer early in boot nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags ASoC: rt5645: Fix errorenous cleanup order media: exynos4-is: Fix compile warning rxrpc: Return an error to sendmsg if call failed eth: tg3: silence the GCC 12 array-bounds warning fs: jfs: fix possible NULL pointer dereference in dbFree() ARM: OMAP1: clock: Fix UART rate reporting algorithm fat: add ratelimit to fat*_ent_bread() ARM: versatile: Add missing of_node_put in dcscb_init ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM ARM: hisi: Add missing of_node_put after of_find_compatible_node PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() powerpc/xics: fix refcount leak in icp_opal_init() macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled drm: fix EDID struct for old ARM OABI format ASoC: mediatek: Fix error handling in mt8173_max98090_dev_probe x86/delay: Fix the wrong asm constraint in delay_loop() drm/mediatek: Fix mtk_cec_mask() spi: spi-ti-qspi: Fix return value handling of wait_for_completion_timeout NFC: NULL out the dev->rfkill to prevent UAF HID: hid-led: fix maximum brightness for Dream Cheeky spi: img-spfi: Fix pm_runtime_get_sync() error checking ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix inotify: show inotify mask flags in proc fdinfo x86/pm: Fix false positive kmemleak report in msr_build_context() drm/msm/dsi: fix error checks and return values for DSI xmit functions drm/msm/hdmi: check return value after calling platform_get_resource_byname() drm/rockchip: vop: fix possible null-ptr-deref in vop_bind() x86/mm: Cleanup the control_va_addr_alignment() __setup handler drm/msm: return an error pointer in msm_gem_prime_get_sg_table() media: uvcvideo: Fix missing check to determine if element is found in list ASoC: mxs-saif: Fix refcount leak in mxs_saif_probe regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt media: exynos4-is: Change clk_disable to clk_disable_unprepare media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeout m68k: math-emu: Fix dependencies of math emulation support sctp: read sk->sk_bound_dev_if once in sctp_rcv() ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition() rxrpc: Fix listen() setting the bar too high for the prealloc rings rxrpc: Don't try to resend the request if we're receiving the reply soc: qcom: smp2p: Fix missing of_node_put() in smp2p_parse_ipc soc: qcom: smsm: Fix missing of_node_put() in smsm_parse_ipc mfd: ipaq-micro: Fix error check return value of platform_get_irq() scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac() drivers/base/node.c: fix compaction sysfs file leak powerpc/8xx: export 'cpm_setbrg' for modules powerpc/idle: Fix return value of __setup() handler powerpc/4xx/cpm: Fix return value of __setup() handler tty: fix deadlock caused by calling printk() under tty_port->lock Input: sparcspkr - fix refcount leak in bbc_beep_probe video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup iommu/amd: Increase timeout waiting for GA log enablement wifi: mac80211: fix use-after-free in chanctx code iwlwifi: mvm: fix assert 1F04 upon reconfig fs-writeback: writeback_sb_inodes:Recalculate 'wrote' according skipped pages ext4: fix use-after-free in ext4_rename_dir_prepare ext4: fix bug_on in ext4_writepages ext4: verify dir block before splitting it dlm: fix plock invalid read dlm: fix missing lkb refcount handling ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock scsi: dc395x: Fix a missing check on list iterator scsi: ufs: qcom: Add a readl() to make sure ref_clk gets enabled drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. drm/bridge: analogix_dp: Grab runtime PM reference for DP-AUX md: fix an incorrect NULL check in does_sb_need_changing md: fix an incorrect NULL check in md_reload_sb RDMA/hfi1: Fix potential integer multiplication overflow errors irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x irqchip: irq-xtensa-mx: fix initial IRQ affinity mac80211: upgrade passive scan to active scan on DFS channels after beacon rx um: chan_user: Fix winch_tramp() return value um: Fix out-of-bounds read in LDT setup iommu/msm: Fix an incorrect NULL check on list iterator nodemask.h: fix compilation error with GCC12 hugetlb: fix huge_pmd_unshare address update rtl818x: Prevent using not initialized queues ASoC: rt5514: Fix event generation for "DSP Voice Wake Up" control carl9170: tx: fix an incorrect use of list iterator gma500: fix an incorrect NULL check on list iterator docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0 dt-bindings: gpio: altera: correct interrupt-cells RDMA/rxe: Generate a completion for unsupported/invalid opcode MIPS: IP27: Remove incorrect `cpu_has_fpu' override netfilter: nf_tables: disallow non-stateful expression in sets earlier pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards staging: greybus: codecs: fix type confusion of list iterator variable usb: usbip: fix a refcount leak in stub_probe() usb: usbip: add missing device lock on tweak configuration cmd USB: storage: karma: fix rio_karma_init return pwm: lp3943: Fix duty calculation in case period was clamped rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value rtc: mt6397: check return value after calling platform_get_resource() serial: meson: acquire port->lock in startup() serial: digicolor-usart: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: sh-sci: Don't allow CS5-6 serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry() modpost: fix removing numeric suffixes jffs2: fix memory leak in jffs2_do_fill_super tcp: tcp_rtx_synack() can be called from process context tracing: Avoid adding tracer option before update_tracer_options i2c: cadence: Increase timeout per message if necessary m68knommu: set ZERO_PAGE() to the allocated zeroed page m68knommu: fix undefined reference to `_init_sp' video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove() net: fix nla_strcmp to handle more then one trailing null character ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer() net: xfrm: unexport __init-annotated xfrm4_protocol_init() net: altera: Fix refcount leak in altera_tse_mdio_create iio: dummy: iio_simple_dummy: check the return value of kstrdup() lkdtm/usercopy: Expand size of "out of frame" object tty: synclink_gt: Fix null-pointer-dereference in slgt_clean() tty: Fix a possible resource leak in icom_probe drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop() USB: host: isp116x: check return value after calling platform_get_resource() drivers: tty: serial: Fix deadlock in sa1100_set_termios() drivers: usb: host: Fix deadlock in oxu_bus_suspend() USB: hcd-pci: Fully suspend across freeze/thaw cycle usb: dwc2: gadget: don't reset gadget's driver->bus misc: rtsx: set NULL intfdata when probe fails clocksource/drivers/sp804: Avoid error on multiple instances staging: rtl8712: fix uninit-value in r871xu_drv_init() serial: msm_serial: disable interrupts in __msm_console_write() md: protect md_unregister_thread from reentrancy Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process" drm/radeon: fix a possible null pointer dereference modpost: fix undefined behavior of is_arm_mapping_symbol() nodemask: Fix return values to be unsigned vringh: Fix loop descriptors check in the indirect cases ALSA: hda/conexant - Fix loopback issue with CX20632 cifs: return errors during session setup during reconnects ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag powerpc/32: Fix overread/overwrite of thread_struct via ptrace mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N PCI: qcom: Fix unbalanced PHY init on probe errors tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd Linux 4.9.318 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I2028f3dcd422886bf997ec7e1d2ae86515f1bfb9
1048 lines
32 KiB
C
1048 lines
32 KiB
C
/*
|
|
* Apple USB BCM5974 (Macbook Air and Penryn Macbook Pro) multitouch driver
|
|
*
|
|
* Copyright (C) 2008 Henrik Rydberg (rydberg@euromail.se)
|
|
* Copyright (C) 2015 John Horan (knasher@gmail.com)
|
|
*
|
|
* The USB initialization and package decoding was made by
|
|
* Scott Shawcroft as part of the touchd user-space driver project:
|
|
* Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com)
|
|
*
|
|
* The BCM5974 driver is based on the appletouch driver:
|
|
* Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
|
|
* Copyright (C) 2005 Stelian Pop (stelian@popies.net)
|
|
* Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
|
|
* Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
|
|
* Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
|
|
* Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb/input.h>
|
|
#include <linux/hid.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/input/mt.h>
|
|
|
|
#define USB_VENDOR_ID_APPLE 0x05ac
|
|
|
|
/* MacbookAir, aka wellspring */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING_ANSI 0x0223
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING_ISO 0x0224
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING_JIS 0x0225
|
|
/* MacbookProPenryn, aka wellspring2 */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232
|
|
/* Macbook5,1 (unibody), aka wellspring3 */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
|
|
/* MacbookAir3,2 (unibody), aka wellspring5 */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI 0x023f
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO 0x0240
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS 0x0241
|
|
/* MacbookAir3,1 (unibody), aka wellspring4 */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244
|
|
/* Macbook8 (unibody, March 2011) */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247
|
|
/* MacbookAir4,1 (unibody, July 2011) */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b
|
|
/* MacbookAir4,2 (unibody, July 2011) */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e
|
|
/* Macbook8,2 (unibody) */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
|
|
/* MacbookPro10,1 (unibody, June 2012) */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
|
|
/* MacbookPro10,2 (unibody, October 2012) */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b
|
|
/* MacbookAir6,2 (unibody, June 2013) */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI 0x0290
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO 0x0291
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS 0x0292
|
|
/* MacbookPro12,1 (2015) */
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING9_ANSI 0x0272
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING9_ISO 0x0273
|
|
#define USB_DEVICE_ID_APPLE_WELLSPRING9_JIS 0x0274
|
|
|
|
#define BCM5974_DEVICE(prod) { \
|
|
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
|
|
USB_DEVICE_ID_MATCH_INT_CLASS | \
|
|
USB_DEVICE_ID_MATCH_INT_PROTOCOL), \
|
|
.idVendor = USB_VENDOR_ID_APPLE, \
|
|
.idProduct = (prod), \
|
|
.bInterfaceClass = USB_INTERFACE_CLASS_HID, \
|
|
.bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE \
|
|
}
|
|
|
|
/* table of devices that work with this driver */
|
|
static const struct usb_device_id bcm5974_table[] = {
|
|
/* MacbookAir1.1 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_JIS),
|
|
/* MacbookProPenryn */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
|
|
/* Macbook5,1 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
|
|
/* MacbookAir3,2 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_JIS),
|
|
/* MacbookAir3,1 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
|
|
/* MacbookPro8 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS),
|
|
/* MacbookAir4,1 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS),
|
|
/* MacbookAir4,2 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_JIS),
|
|
/* MacbookPro8,2 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
|
|
/* MacbookPro10,1 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
|
|
/* MacbookPro10,2 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
|
|
/* MacbookAir6,2 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_JIS),
|
|
/* MacbookPro12,1 */
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING9_ANSI),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING9_ISO),
|
|
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING9_JIS),
|
|
/* Terminating entry */
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, bcm5974_table);
|
|
|
|
MODULE_AUTHOR("Henrik Rydberg");
|
|
MODULE_DESCRIPTION("Apple USB BCM5974 multitouch driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define dprintk(level, format, a...)\
|
|
{ if (debug >= level) printk(KERN_DEBUG format, ##a); }
|
|
|
|
static int debug = 1;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Activate debugging output");
|
|
|
|
/* button data structure */
|
|
struct bt_data {
|
|
u8 unknown1; /* constant */
|
|
u8 button; /* left button */
|
|
u8 rel_x; /* relative x coordinate */
|
|
u8 rel_y; /* relative y coordinate */
|
|
};
|
|
|
|
/* trackpad header types */
|
|
enum tp_type {
|
|
TYPE1, /* plain trackpad */
|
|
TYPE2, /* button integrated in trackpad */
|
|
TYPE3, /* additional header fields since June 2013 */
|
|
TYPE4 /* additional header field for pressure data */
|
|
};
|
|
|
|
/* trackpad finger data offsets, le16-aligned */
|
|
#define HEADER_TYPE1 (13 * sizeof(__le16))
|
|
#define HEADER_TYPE2 (15 * sizeof(__le16))
|
|
#define HEADER_TYPE3 (19 * sizeof(__le16))
|
|
#define HEADER_TYPE4 (23 * sizeof(__le16))
|
|
|
|
/* trackpad button data offsets */
|
|
#define BUTTON_TYPE1 0
|
|
#define BUTTON_TYPE2 15
|
|
#define BUTTON_TYPE3 23
|
|
#define BUTTON_TYPE4 31
|
|
|
|
/* list of device capability bits */
|
|
#define HAS_INTEGRATED_BUTTON 1
|
|
|
|
/* trackpad finger data block size */
|
|
#define FSIZE_TYPE1 (14 * sizeof(__le16))
|
|
#define FSIZE_TYPE2 (14 * sizeof(__le16))
|
|
#define FSIZE_TYPE3 (14 * sizeof(__le16))
|
|
#define FSIZE_TYPE4 (15 * sizeof(__le16))
|
|
|
|
/* offset from header to finger struct */
|
|
#define DELTA_TYPE1 (0 * sizeof(__le16))
|
|
#define DELTA_TYPE2 (0 * sizeof(__le16))
|
|
#define DELTA_TYPE3 (0 * sizeof(__le16))
|
|
#define DELTA_TYPE4 (1 * sizeof(__le16))
|
|
|
|
/* usb control message mode switch data */
|
|
#define USBMSG_TYPE1 8, 0x300, 0, 0, 0x1, 0x8
|
|
#define USBMSG_TYPE2 8, 0x300, 0, 0, 0x1, 0x8
|
|
#define USBMSG_TYPE3 8, 0x300, 0, 0, 0x1, 0x8
|
|
#define USBMSG_TYPE4 2, 0x302, 2, 1, 0x1, 0x0
|
|
|
|
/* Wellspring initialization constants */
|
|
#define BCM5974_WELLSPRING_MODE_READ_REQUEST_ID 1
|
|
#define BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID 9
|
|
|
|
/* trackpad finger structure, le16-aligned */
|
|
struct tp_finger {
|
|
__le16 origin; /* zero when switching track finger */
|
|
__le16 abs_x; /* absolute x coodinate */
|
|
__le16 abs_y; /* absolute y coodinate */
|
|
__le16 rel_x; /* relative x coodinate */
|
|
__le16 rel_y; /* relative y coodinate */
|
|
__le16 tool_major; /* tool area, major axis */
|
|
__le16 tool_minor; /* tool area, minor axis */
|
|
__le16 orientation; /* 16384 when point, else 15 bit angle */
|
|
__le16 touch_major; /* touch area, major axis */
|
|
__le16 touch_minor; /* touch area, minor axis */
|
|
__le16 unused[2]; /* zeros */
|
|
__le16 pressure; /* pressure on forcetouch touchpad */
|
|
__le16 multi; /* one finger: varies, more fingers: constant */
|
|
} __attribute__((packed,aligned(2)));
|
|
|
|
/* trackpad finger data size, empirically at least ten fingers */
|
|
#define MAX_FINGERS 16
|
|
#define MAX_FINGER_ORIENTATION 16384
|
|
|
|
/* device-specific parameters */
|
|
struct bcm5974_param {
|
|
int snratio; /* signal-to-noise ratio */
|
|
int min; /* device minimum reading */
|
|
int max; /* device maximum reading */
|
|
};
|
|
|
|
/* device-specific configuration */
|
|
struct bcm5974_config {
|
|
int ansi, iso, jis; /* the product id of this device */
|
|
int caps; /* device capability bitmask */
|
|
int bt_ep; /* the endpoint of the button interface */
|
|
int bt_datalen; /* data length of the button interface */
|
|
int tp_ep; /* the endpoint of the trackpad interface */
|
|
enum tp_type tp_type; /* type of trackpad interface */
|
|
int tp_header; /* bytes in header block */
|
|
int tp_datalen; /* data length of the trackpad interface */
|
|
int tp_button; /* offset to button data */
|
|
int tp_fsize; /* bytes in single finger block */
|
|
int tp_delta; /* offset from header to finger struct */
|
|
int um_size; /* usb control message length */
|
|
int um_req_val; /* usb control message value */
|
|
int um_req_idx; /* usb control message index */
|
|
int um_switch_idx; /* usb control message mode switch index */
|
|
int um_switch_on; /* usb control message mode switch on */
|
|
int um_switch_off; /* usb control message mode switch off */
|
|
struct bcm5974_param p; /* finger pressure limits */
|
|
struct bcm5974_param w; /* finger width limits */
|
|
struct bcm5974_param x; /* horizontal limits */
|
|
struct bcm5974_param y; /* vertical limits */
|
|
struct bcm5974_param o; /* orientation limits */
|
|
};
|
|
|
|
/* logical device structure */
|
|
struct bcm5974 {
|
|
char phys[64];
|
|
struct usb_device *udev; /* usb device */
|
|
struct usb_interface *intf; /* our interface */
|
|
struct input_dev *input; /* input dev */
|
|
struct bcm5974_config cfg; /* device configuration */
|
|
struct mutex pm_mutex; /* serialize access to open/suspend */
|
|
int opened; /* 1: opened, 0: closed */
|
|
struct urb *bt_urb; /* button usb request block */
|
|
struct bt_data *bt_data; /* button transferred data */
|
|
struct urb *tp_urb; /* trackpad usb request block */
|
|
u8 *tp_data; /* trackpad transferred data */
|
|
const struct tp_finger *index[MAX_FINGERS]; /* finger index data */
|
|
struct input_mt_pos pos[MAX_FINGERS]; /* position array */
|
|
int slots[MAX_FINGERS]; /* slot assignments */
|
|
};
|
|
|
|
/* trackpad finger block data, le16-aligned */
|
|
static const struct tp_finger *get_tp_finger(const struct bcm5974 *dev, int i)
|
|
{
|
|
const struct bcm5974_config *c = &dev->cfg;
|
|
u8 *f_base = dev->tp_data + c->tp_header + c->tp_delta;
|
|
|
|
return (const struct tp_finger *)(f_base + i * c->tp_fsize);
|
|
}
|
|
|
|
#define DATAFORMAT(type) \
|
|
type, \
|
|
HEADER_##type, \
|
|
HEADER_##type + (MAX_FINGERS) * (FSIZE_##type), \
|
|
BUTTON_##type, \
|
|
FSIZE_##type, \
|
|
DELTA_##type, \
|
|
USBMSG_##type
|
|
|
|
/* logical signal quality */
|
|
#define SN_PRESSURE 45 /* pressure signal-to-noise ratio */
|
|
#define SN_WIDTH 25 /* width signal-to-noise ratio */
|
|
#define SN_COORD 250 /* coordinate signal-to-noise ratio */
|
|
#define SN_ORIENT 10 /* orientation signal-to-noise ratio */
|
|
|
|
/* device constants */
|
|
static const struct bcm5974_config bcm5974_config_table[] = {
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
|
|
0,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE1),
|
|
{ SN_PRESSURE, 0, 256 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4824, 5342 },
|
|
{ SN_COORD, -172, 5820 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
|
|
0,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE1),
|
|
{ SN_PRESSURE, 0, 256 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4824, 4824 },
|
|
{ SN_COORD, -172, 4290 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING3_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING3_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE2),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4460, 5166 },
|
|
{ SN_COORD, -75, 6700 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING4_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING4_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE2),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4620, 5140 },
|
|
{ SN_COORD, -150, 6600 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE2),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4616, 5112 },
|
|
{ SN_COORD, -142, 5234 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING5_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING5_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE2),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4415, 5050 },
|
|
{ SN_COORD, -55, 6680 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING6_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING6_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE2),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4620, 5140 },
|
|
{ SN_COORD, -150, 6600 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE2),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4750, 5280 },
|
|
{ SN_COORD, -150, 6730 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE2),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4620, 5140 },
|
|
{ SN_COORD, -150, 6600 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING7_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING7_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE2),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4750, 5280 },
|
|
{ SN_COORD, -150, 6730 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0x84, sizeof(struct bt_data),
|
|
0x81, DATAFORMAT(TYPE2),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4750, 5280 },
|
|
{ SN_COORD, -150, 6730 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING8_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING8_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0, sizeof(struct bt_data),
|
|
0x83, DATAFORMAT(TYPE3),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4620, 5140 },
|
|
{ SN_COORD, -150, 6600 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{
|
|
USB_DEVICE_ID_APPLE_WELLSPRING9_ANSI,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING9_ISO,
|
|
USB_DEVICE_ID_APPLE_WELLSPRING9_JIS,
|
|
HAS_INTEGRATED_BUTTON,
|
|
0, sizeof(struct bt_data),
|
|
0x83, DATAFORMAT(TYPE4),
|
|
{ SN_PRESSURE, 0, 300 },
|
|
{ SN_WIDTH, 0, 2048 },
|
|
{ SN_COORD, -4828, 5345 },
|
|
{ SN_COORD, -203, 6803 },
|
|
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
|
|
},
|
|
{}
|
|
};
|
|
|
|
/* return the device-specific configuration by device */
|
|
static const struct bcm5974_config *bcm5974_get_config(struct usb_device *udev)
|
|
{
|
|
u16 id = le16_to_cpu(udev->descriptor.idProduct);
|
|
const struct bcm5974_config *cfg;
|
|
|
|
for (cfg = bcm5974_config_table; cfg->ansi; ++cfg)
|
|
if (cfg->ansi == id || cfg->iso == id || cfg->jis == id)
|
|
return cfg;
|
|
|
|
return bcm5974_config_table;
|
|
}
|
|
|
|
/* convert 16-bit little endian to signed integer */
|
|
static inline int raw2int(__le16 x)
|
|
{
|
|
return (signed short)le16_to_cpu(x);
|
|
}
|
|
|
|
static void set_abs(struct input_dev *input, unsigned int code,
|
|
const struct bcm5974_param *p)
|
|
{
|
|
int fuzz = p->snratio ? (p->max - p->min) / p->snratio : 0;
|
|
input_set_abs_params(input, code, p->min, p->max, fuzz, 0);
|
|
}
|
|
|
|
/* setup which logical events to report */
|
|
static void setup_events_to_report(struct input_dev *input_dev,
|
|
const struct bcm5974_config *cfg)
|
|
{
|
|
__set_bit(EV_ABS, input_dev->evbit);
|
|
|
|
/* for synaptics only */
|
|
input_set_abs_params(input_dev, ABS_PRESSURE, 0, 256, 5, 0);
|
|
input_set_abs_params(input_dev, ABS_TOOL_WIDTH, 0, 16, 0, 0);
|
|
|
|
/* finger touch area */
|
|
set_abs(input_dev, ABS_MT_TOUCH_MAJOR, &cfg->w);
|
|
set_abs(input_dev, ABS_MT_TOUCH_MINOR, &cfg->w);
|
|
/* finger approach area */
|
|
set_abs(input_dev, ABS_MT_WIDTH_MAJOR, &cfg->w);
|
|
set_abs(input_dev, ABS_MT_WIDTH_MINOR, &cfg->w);
|
|
/* finger orientation */
|
|
set_abs(input_dev, ABS_MT_ORIENTATION, &cfg->o);
|
|
/* finger position */
|
|
set_abs(input_dev, ABS_MT_POSITION_X, &cfg->x);
|
|
set_abs(input_dev, ABS_MT_POSITION_Y, &cfg->y);
|
|
|
|
__set_bit(EV_KEY, input_dev->evbit);
|
|
__set_bit(BTN_LEFT, input_dev->keybit);
|
|
|
|
if (cfg->caps & HAS_INTEGRATED_BUTTON)
|
|
__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
|
|
|
|
input_mt_init_slots(input_dev, MAX_FINGERS,
|
|
INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK);
|
|
}
|
|
|
|
/* report button data as logical button state */
|
|
static int report_bt_state(struct bcm5974 *dev, int size)
|
|
{
|
|
if (size != sizeof(struct bt_data))
|
|
return -EIO;
|
|
|
|
dprintk(7,
|
|
"bcm5974: button data: %x %x %x %x\n",
|
|
dev->bt_data->unknown1, dev->bt_data->button,
|
|
dev->bt_data->rel_x, dev->bt_data->rel_y);
|
|
|
|
input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
|
|
input_sync(dev->input);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void report_finger_data(struct input_dev *input, int slot,
|
|
const struct input_mt_pos *pos,
|
|
const struct tp_finger *f)
|
|
{
|
|
input_mt_slot(input, slot);
|
|
input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
|
|
|
|
input_report_abs(input, ABS_MT_TOUCH_MAJOR,
|
|
raw2int(f->touch_major) << 1);
|
|
input_report_abs(input, ABS_MT_TOUCH_MINOR,
|
|
raw2int(f->touch_minor) << 1);
|
|
input_report_abs(input, ABS_MT_WIDTH_MAJOR,
|
|
raw2int(f->tool_major) << 1);
|
|
input_report_abs(input, ABS_MT_WIDTH_MINOR,
|
|
raw2int(f->tool_minor) << 1);
|
|
input_report_abs(input, ABS_MT_ORIENTATION,
|
|
MAX_FINGER_ORIENTATION - raw2int(f->orientation));
|
|
input_report_abs(input, ABS_MT_POSITION_X, pos->x);
|
|
input_report_abs(input, ABS_MT_POSITION_Y, pos->y);
|
|
}
|
|
|
|
static void report_synaptics_data(struct input_dev *input,
|
|
const struct bcm5974_config *cfg,
|
|
const struct tp_finger *f, int raw_n)
|
|
{
|
|
int abs_p = 0, abs_w = 0;
|
|
|
|
if (raw_n) {
|
|
int p = raw2int(f->touch_major);
|
|
int w = raw2int(f->tool_major);
|
|
if (p > 0 && raw2int(f->origin)) {
|
|
abs_p = clamp_val(256 * p / cfg->p.max, 0, 255);
|
|
abs_w = clamp_val(16 * w / cfg->w.max, 0, 15);
|
|
}
|
|
}
|
|
|
|
input_report_abs(input, ABS_PRESSURE, abs_p);
|
|
input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
|
|
}
|
|
|
|
/* report trackpad data as logical trackpad state */
|
|
static int report_tp_state(struct bcm5974 *dev, int size)
|
|
{
|
|
const struct bcm5974_config *c = &dev->cfg;
|
|
const struct tp_finger *f;
|
|
struct input_dev *input = dev->input;
|
|
int raw_n, i, n = 0;
|
|
|
|
if (size < c->tp_header || (size - c->tp_header) % c->tp_fsize != 0)
|
|
return -EIO;
|
|
|
|
raw_n = (size - c->tp_header) / c->tp_fsize;
|
|
|
|
for (i = 0; i < raw_n; i++) {
|
|
f = get_tp_finger(dev, i);
|
|
if (raw2int(f->touch_major) == 0)
|
|
continue;
|
|
dev->pos[n].x = raw2int(f->abs_x);
|
|
dev->pos[n].y = c->y.min + c->y.max - raw2int(f->abs_y);
|
|
dev->index[n++] = f;
|
|
}
|
|
|
|
input_mt_assign_slots(input, dev->slots, dev->pos, n, 0);
|
|
|
|
for (i = 0; i < n; i++)
|
|
report_finger_data(input, dev->slots[i],
|
|
&dev->pos[i], dev->index[i]);
|
|
|
|
input_mt_sync_frame(input);
|
|
|
|
report_synaptics_data(input, c, get_tp_finger(dev, 0), raw_n);
|
|
|
|
/* later types report button events via integrated button only */
|
|
if (c->caps & HAS_INTEGRATED_BUTTON) {
|
|
int ibt = raw2int(dev->tp_data[c->tp_button]);
|
|
input_report_key(input, BTN_LEFT, ibt);
|
|
}
|
|
|
|
input_sync(input);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
|
|
{
|
|
const struct bcm5974_config *c = &dev->cfg;
|
|
int retval = 0, size;
|
|
char *data;
|
|
|
|
/* Type 3 does not require a mode switch */
|
|
if (dev->cfg.tp_type == TYPE3)
|
|
return 0;
|
|
|
|
data = kmalloc(c->um_size, GFP_KERNEL);
|
|
if (!data) {
|
|
dev_err(&dev->intf->dev, "out of memory\n");
|
|
retval = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
/* read configuration */
|
|
size = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
|
|
BCM5974_WELLSPRING_MODE_READ_REQUEST_ID,
|
|
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
|
|
c->um_req_val, c->um_req_idx, data, c->um_size, 5000);
|
|
|
|
if (size != c->um_size) {
|
|
dev_err(&dev->intf->dev, "could not read from device\n");
|
|
retval = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
/* apply the mode switch */
|
|
data[c->um_switch_idx] = on ? c->um_switch_on : c->um_switch_off;
|
|
|
|
/* write configuration */
|
|
size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
|
|
BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID,
|
|
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
|
|
c->um_req_val, c->um_req_idx, data, c->um_size, 5000);
|
|
|
|
if (size != c->um_size) {
|
|
dev_err(&dev->intf->dev, "could not write to device\n");
|
|
retval = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
dprintk(2, "bcm5974: switched to %s mode.\n",
|
|
on ? "wellspring" : "normal");
|
|
|
|
out:
|
|
kfree(data);
|
|
return retval;
|
|
}
|
|
|
|
static void bcm5974_irq_button(struct urb *urb)
|
|
{
|
|
struct bcm5974 *dev = urb->context;
|
|
struct usb_interface *intf = dev->intf;
|
|
int error;
|
|
|
|
switch (urb->status) {
|
|
case 0:
|
|
break;
|
|
case -EOVERFLOW:
|
|
case -ECONNRESET:
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
dev_dbg(&intf->dev, "button urb shutting down: %d\n",
|
|
urb->status);
|
|
return;
|
|
default:
|
|
dev_dbg(&intf->dev, "button urb status: %d\n", urb->status);
|
|
goto exit;
|
|
}
|
|
|
|
if (report_bt_state(dev, dev->bt_urb->actual_length))
|
|
dprintk(1, "bcm5974: bad button package, length: %d\n",
|
|
dev->bt_urb->actual_length);
|
|
|
|
exit:
|
|
error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
|
|
if (error)
|
|
dev_err(&intf->dev, "button urb failed: %d\n", error);
|
|
}
|
|
|
|
static void bcm5974_irq_trackpad(struct urb *urb)
|
|
{
|
|
struct bcm5974 *dev = urb->context;
|
|
struct usb_interface *intf = dev->intf;
|
|
int error;
|
|
|
|
switch (urb->status) {
|
|
case 0:
|
|
break;
|
|
case -EOVERFLOW:
|
|
case -ECONNRESET:
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
dev_dbg(&intf->dev, "trackpad urb shutting down: %d\n",
|
|
urb->status);
|
|
return;
|
|
default:
|
|
dev_dbg(&intf->dev, "trackpad urb status: %d\n", urb->status);
|
|
goto exit;
|
|
}
|
|
|
|
/* control response ignored */
|
|
if (dev->tp_urb->actual_length == 2)
|
|
goto exit;
|
|
|
|
if (report_tp_state(dev, dev->tp_urb->actual_length))
|
|
dprintk(1, "bcm5974: bad trackpad package, length: %d\n",
|
|
dev->tp_urb->actual_length);
|
|
|
|
exit:
|
|
error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
|
|
if (error)
|
|
dev_err(&intf->dev, "trackpad urb failed: %d\n", error);
|
|
}
|
|
|
|
/*
|
|
* The Wellspring trackpad, like many recent Apple trackpads, share
|
|
* the usb device with the keyboard. Since keyboards are usually
|
|
* handled by the HID system, the device ends up being handled by two
|
|
* modules. Setting up the device therefore becomes slightly
|
|
* complicated. To enable multitouch features, a mode switch is
|
|
* required, which is usually applied via the control interface of the
|
|
* device. It can be argued where this switch should take place. In
|
|
* some drivers, like appletouch, the switch is made during
|
|
* probe. However, the hid module may also alter the state of the
|
|
* device, resulting in trackpad malfunction under certain
|
|
* circumstances. To get around this problem, there is at least one
|
|
* example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to
|
|
* receive a reset_resume request rather than the normal resume.
|
|
* Since the implementation of reset_resume is equal to mode switch
|
|
* plus start_traffic, it seems easier to always do the switch when
|
|
* starting traffic on the device.
|
|
*/
|
|
static int bcm5974_start_traffic(struct bcm5974 *dev)
|
|
{
|
|
int error;
|
|
|
|
error = bcm5974_wellspring_mode(dev, true);
|
|
if (error) {
|
|
dprintk(1, "bcm5974: mode switch failed\n");
|
|
goto err_out;
|
|
}
|
|
|
|
if (dev->bt_urb) {
|
|
error = usb_submit_urb(dev->bt_urb, GFP_KERNEL);
|
|
if (error)
|
|
goto err_reset_mode;
|
|
}
|
|
|
|
error = usb_submit_urb(dev->tp_urb, GFP_KERNEL);
|
|
if (error)
|
|
goto err_kill_bt;
|
|
|
|
return 0;
|
|
|
|
err_kill_bt:
|
|
usb_kill_urb(dev->bt_urb);
|
|
err_reset_mode:
|
|
bcm5974_wellspring_mode(dev, false);
|
|
err_out:
|
|
return error;
|
|
}
|
|
|
|
static void bcm5974_pause_traffic(struct bcm5974 *dev)
|
|
{
|
|
usb_kill_urb(dev->tp_urb);
|
|
usb_kill_urb(dev->bt_urb);
|
|
bcm5974_wellspring_mode(dev, false);
|
|
}
|
|
|
|
/*
|
|
* The code below implements open/close and manual suspend/resume.
|
|
* All functions may be called in random order.
|
|
*
|
|
* Opening a suspended device fails with EACCES - permission denied.
|
|
*
|
|
* Failing a resume leaves the device resumed but closed.
|
|
*/
|
|
static int bcm5974_open(struct input_dev *input)
|
|
{
|
|
struct bcm5974 *dev = input_get_drvdata(input);
|
|
int error;
|
|
|
|
error = usb_autopm_get_interface(dev->intf);
|
|
if (error)
|
|
return error;
|
|
|
|
mutex_lock(&dev->pm_mutex);
|
|
|
|
error = bcm5974_start_traffic(dev);
|
|
if (!error)
|
|
dev->opened = 1;
|
|
|
|
mutex_unlock(&dev->pm_mutex);
|
|
|
|
if (error)
|
|
usb_autopm_put_interface(dev->intf);
|
|
|
|
return error;
|
|
}
|
|
|
|
static void bcm5974_close(struct input_dev *input)
|
|
{
|
|
struct bcm5974 *dev = input_get_drvdata(input);
|
|
|
|
mutex_lock(&dev->pm_mutex);
|
|
|
|
bcm5974_pause_traffic(dev);
|
|
dev->opened = 0;
|
|
|
|
mutex_unlock(&dev->pm_mutex);
|
|
|
|
usb_autopm_put_interface(dev->intf);
|
|
}
|
|
|
|
static int bcm5974_suspend(struct usb_interface *iface, pm_message_t message)
|
|
{
|
|
struct bcm5974 *dev = usb_get_intfdata(iface);
|
|
|
|
mutex_lock(&dev->pm_mutex);
|
|
|
|
if (dev->opened)
|
|
bcm5974_pause_traffic(dev);
|
|
|
|
mutex_unlock(&dev->pm_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm5974_resume(struct usb_interface *iface)
|
|
{
|
|
struct bcm5974 *dev = usb_get_intfdata(iface);
|
|
int error = 0;
|
|
|
|
mutex_lock(&dev->pm_mutex);
|
|
|
|
if (dev->opened)
|
|
error = bcm5974_start_traffic(dev);
|
|
|
|
mutex_unlock(&dev->pm_mutex);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int bcm5974_probe(struct usb_interface *iface,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *udev = interface_to_usbdev(iface);
|
|
const struct bcm5974_config *cfg;
|
|
struct bcm5974 *dev;
|
|
struct input_dev *input_dev;
|
|
int error = -ENOMEM;
|
|
|
|
/* find the product index */
|
|
cfg = bcm5974_get_config(udev);
|
|
|
|
/* allocate memory for our device state and initialize it */
|
|
dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!dev || !input_dev) {
|
|
dev_err(&iface->dev, "out of memory\n");
|
|
goto err_free_devs;
|
|
}
|
|
|
|
dev->udev = udev;
|
|
dev->intf = iface;
|
|
dev->input = input_dev;
|
|
dev->cfg = *cfg;
|
|
mutex_init(&dev->pm_mutex);
|
|
|
|
/* setup urbs */
|
|
if (cfg->tp_type == TYPE1) {
|
|
dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!dev->bt_urb)
|
|
goto err_free_devs;
|
|
}
|
|
|
|
dev->tp_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!dev->tp_urb)
|
|
goto err_free_bt_urb;
|
|
|
|
if (dev->bt_urb) {
|
|
dev->bt_data = usb_alloc_coherent(dev->udev,
|
|
dev->cfg.bt_datalen, GFP_KERNEL,
|
|
&dev->bt_urb->transfer_dma);
|
|
if (!dev->bt_data)
|
|
goto err_free_urb;
|
|
}
|
|
|
|
dev->tp_data = usb_alloc_coherent(dev->udev,
|
|
dev->cfg.tp_datalen, GFP_KERNEL,
|
|
&dev->tp_urb->transfer_dma);
|
|
if (!dev->tp_data)
|
|
goto err_free_bt_buffer;
|
|
|
|
if (dev->bt_urb) {
|
|
usb_fill_int_urb(dev->bt_urb, udev,
|
|
usb_rcvintpipe(udev, cfg->bt_ep),
|
|
dev->bt_data, dev->cfg.bt_datalen,
|
|
bcm5974_irq_button, dev, 1);
|
|
|
|
dev->bt_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
}
|
|
|
|
usb_fill_int_urb(dev->tp_urb, udev,
|
|
usb_rcvintpipe(udev, cfg->tp_ep),
|
|
dev->tp_data, dev->cfg.tp_datalen,
|
|
bcm5974_irq_trackpad, dev, 1);
|
|
|
|
dev->tp_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
|
|
/* create bcm5974 device */
|
|
usb_make_path(udev, dev->phys, sizeof(dev->phys));
|
|
strlcat(dev->phys, "/input0", sizeof(dev->phys));
|
|
|
|
input_dev->name = "bcm5974";
|
|
input_dev->phys = dev->phys;
|
|
usb_to_input_id(dev->udev, &input_dev->id);
|
|
/* report driver capabilities via the version field */
|
|
input_dev->id.version = cfg->caps;
|
|
input_dev->dev.parent = &iface->dev;
|
|
|
|
input_set_drvdata(input_dev, dev);
|
|
|
|
input_dev->open = bcm5974_open;
|
|
input_dev->close = bcm5974_close;
|
|
|
|
setup_events_to_report(input_dev, cfg);
|
|
|
|
error = input_register_device(dev->input);
|
|
if (error)
|
|
goto err_free_buffer;
|
|
|
|
/* save our data pointer in this interface device */
|
|
usb_set_intfdata(iface, dev);
|
|
|
|
return 0;
|
|
|
|
err_free_buffer:
|
|
usb_free_coherent(dev->udev, dev->cfg.tp_datalen,
|
|
dev->tp_data, dev->tp_urb->transfer_dma);
|
|
err_free_bt_buffer:
|
|
if (dev->bt_urb)
|
|
usb_free_coherent(dev->udev, dev->cfg.bt_datalen,
|
|
dev->bt_data, dev->bt_urb->transfer_dma);
|
|
err_free_urb:
|
|
usb_free_urb(dev->tp_urb);
|
|
err_free_bt_urb:
|
|
usb_free_urb(dev->bt_urb);
|
|
err_free_devs:
|
|
usb_set_intfdata(iface, NULL);
|
|
input_free_device(input_dev);
|
|
kfree(dev);
|
|
return error;
|
|
}
|
|
|
|
static void bcm5974_disconnect(struct usb_interface *iface)
|
|
{
|
|
struct bcm5974 *dev = usb_get_intfdata(iface);
|
|
|
|
usb_set_intfdata(iface, NULL);
|
|
|
|
input_unregister_device(dev->input);
|
|
usb_free_coherent(dev->udev, dev->cfg.tp_datalen,
|
|
dev->tp_data, dev->tp_urb->transfer_dma);
|
|
if (dev->bt_urb)
|
|
usb_free_coherent(dev->udev, dev->cfg.bt_datalen,
|
|
dev->bt_data, dev->bt_urb->transfer_dma);
|
|
usb_free_urb(dev->tp_urb);
|
|
usb_free_urb(dev->bt_urb);
|
|
kfree(dev);
|
|
}
|
|
|
|
static struct usb_driver bcm5974_driver = {
|
|
.name = "bcm5974",
|
|
.probe = bcm5974_probe,
|
|
.disconnect = bcm5974_disconnect,
|
|
.suspend = bcm5974_suspend,
|
|
.resume = bcm5974_resume,
|
|
.id_table = bcm5974_table,
|
|
.supports_autosuspend = 1,
|
|
};
|
|
|
|
module_usb_driver(bcm5974_driver);
|