Changes in 4.9.249 spi: bcm2835aux: Fix use-after-free on unbind spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe iwlwifi: pcie: limit memory read spin time arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. ARC: stack unwinding: don't assume non-current task is sleeping platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE Input: cm109 - do not stomp on control URB Input: i8042 - add Acer laptops to the i8042 reset list pinctrl: amd: remove debounce filter setting in IRQ type setting scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" spi: Prevent adding devices below an unregistering controller net/mlx4_en: Avoid scheduling restart task if it is already running tcp: fix cwnd-limited bug for TSO deferral where we send nothing net: stmmac: delete the eee_ctrl_timer after napi disabled net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux net: bridge: vlan: fix error return code in __vlan_add() mac80211: mesh: fix mesh_pathtbl_init() error path USB: dummy-hcd: Fix uninitialized array use in init() USB: add RESET_RESUME quirk for Snapscan 1212 ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: usb-audio: Fix control 'access overflow' errors from chmap xhci: Give USB2 ports time to enter U3 in bus suspend USB: sisusbvga: Make console support depend on BROKEN ALSA: pcm: oss: Fix potential out-of-bounds shift serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access pinctrl: merrifield: Set default bias in case no particular value given pinctrl: baytrail: Avoid clearing debounce value when turning it off scsi: bnx2i: Requires MMU can: softing: softing_netdev_open(): fix error handling RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling drm/tegra: sor: Disable clocks on error in tegra_sor_init() scsi: mpt3sas: Increase IOCInit request timeout to 30s dm table: Remove BUG_ON(in_interrupt()) soc/tegra: fuse: Fix index bug in get_process_id USB: serial: option: add interface-number sanity check to flag handling USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XU ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410 ARM: dts: exynos: fix USB 3.0 pins supply being turned off on Odroid XU HID: i2c-hid: add Vero K147 to descriptor override serial_core: Check for port state when tty is in error state media: msi2500: assign SPI bus number dynamically md: fix a warning caused by a race between concurrent md_ioctl()s Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() drm/gma500: fix double free of gma_connector RDMA/rxe: Compute PSN windows correctly ARM: p2v: fix handling of LPAE translation in BE mode crypto: talitos - Fix return type of current_desc_hdr() spi: img-spfi: fix reference leak in img_spfi_resume ASoC: pcm: DRAIN support reactivation arm64: dts: exynos: Correct psci compatible used on Exynos7 Bluetooth: Fix null pointer dereference in hci_event_packet() spi: spi-ti-qspi: fix reference leak in ti_qspi_setup spi: tegra20-slink: fix reference leak in slink ops of tegra20 spi: tegra20-sflash: fix reference leak in tegra_sflash_resume spi: tegra114: fix reference leak in tegra spi ops RDMa/mthca: Work around -Wenum-conversion warning MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA staging: greybus: codecs: Fix reference counter leak in error handling media: solo6x10: fix missing snd_card_free in error handling case drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() Input: ads7846 - fix integer overflow on Rt calculation Input: ads7846 - fix unaligned access on 7845 powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 crypto: omap-aes - Fix PM disable depth imbalance in omap_aes_probe soc: ti: knav_qmss: fix reference leak in knav_queue_probe soc: ti: Fix reference imbalance in knav_dma_probe drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe RDMA/cxgb4: Validate the number of CQEs memstick: fix a double-free bug in memstick_check ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host orinoco: Move context allocation after processing the skb cw1200: fix missing destroy_workqueue() on error in cw1200_init_common media: siano: fix memory leak of debugfs members in smsdvb_hotplug mips: cdmm: fix use-after-free in mips_cdmm_bus_discover HSI: omap_ssi: Don't jump to free ID in ssi_add_controller() ARM: dts: at91: at91sam9rl: fix ADC triggers NFSv4.2: condition READDIR's mask for security label based on LSM state SUNRPC: xprt_load_transport() needs to support the netid "rdma6" lockd: don't use interval-based rebinding over TCP NFS: switch nfsiod to be an UNBOUND workqueue. vfio-pci: Use io_remap_pfn_range() for PCI IO memory media: saa7146: fix array overflow in vidioc_s_audio() clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent() pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe() memstick: r592: Fix error return in r592_probe() ASoC: jz4740-i2s: add missed checks for clk_get() dm ioctl: fix error return code in target_message clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI cpufreq: highbank: Add missing MODULE_DEVICE_TABLE cpufreq: st: Add missing MODULE_DEVICE_TABLE cpufreq: loongson1: Add missing MODULE_ALIAS cpufreq: scpi: Add missing MODULE_ALIAS scsi: pm80xx: Fix error return in pm8001_pci_probe() seq_buf: Avoid type mismatch for seq_buf_init scsi: fnic: Fix error return code in fnic_probe() powerpc/pseries/hibernation: drop pseries_suspend_begin() from suspend ops usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probe usb: oxu210hp-hcd: Fix memory leak in oxu_create speakup: fix uninitialized flush_lock nfsd: Fix message level for normal termination nfs_common: need lock during iterate through the list x86/kprobes: Restore BTF if the single-stepping is cancelled clk: tegra: Fix duplicated SE clock entry extcon: max77693: Fix modalias string ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control() irqchip/alpine-msi: Fix freeing of interrupts on allocation error path um: chan_xterm: Fix fd leak nfc: s3fwrn5: Release the nfc firmware powerpc/ps3: use dma_mapping_error() checkpatch: fix unescaped left brace net: bcmgenet: Fix a resource leak in an error handling path in the probe functin net: allwinner: Fix some resources leak in the error handling path of the probe and in the remove function net: korina: fix return value watchdog: qcom: Avoid context switch in restart handler clk: ti: Fix memleak in ti_fapll_synth_setup perf record: Fix memory leak when using '--user-regs=?' to list registers qlcnic: Fix error code in probe clk: s2mps11: Fix a resource leak in error handling paths in the probe function cfg80211: initialize rekey_data Input: cros_ec_keyb - send 'scancodes' in addition to key events Input: goodix - add upside-down quirk for Teclast X98 Pro tablet media: gspca: Fix memory leak in probe media: sunxi-cir: ensure IR is handled when it is continuous media: netup_unidvb: Don't leak SPI master in probe error path Input: cyapa_gen6 - fix out-of-bounds stack access Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks" ACPI: PNP: compare the string length in the matching_id() ALSA: pcm: oss: Fix a few more UBSAN fixes ALSA: usb-audio: Disable sample read check if firmware doesn't give back s390/dasd: prevent inconsistent LCU device data s390/dasd: fix list corruption of pavgroup group list s390/dasd: fix list corruption of lcu list staging: comedi: mf6x4: Fix AI end-of-conversion detection powerpc/perf: Exclude kernel samples while counting events in user space. USB: serial: mos7720: fix parallel-port state restore USB: serial: keyspan_pda: fix dropped unthrottle interrupts USB: serial: keyspan_pda: fix write deadlock USB: serial: keyspan_pda: fix stalled writes USB: serial: keyspan_pda: fix write-wakeup use-after-free USB: serial: keyspan_pda: fix tx-unthrottle use-after-free USB: serial: keyspan_pda: fix write unthrottling btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block() Btrfs: fix selftests failure due to uninitialized i_mode in test inodes btrfs: fix return value mixup in btrfs_get_extent ext4: fix a memory leak of ext4_free_data KVM: arm64: Introduce handling of AArch32 TTBCR2 traps powerpc/xmon: Change printk() to pr_cont() ceph: fix race in concurrent __ceph_remove_cap invocations jffs2: Fix GC exit abnormally jfs: Fix array index bounds check in dbAdjTree drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor() spi: spi-sh: Fix use-after-free on unbind spi: davinci: Fix use-after-free on unbind spi: pic32: Don't leak DMA channels in probe error path spi: rb4xx: Don't leak SPI master in probe error path spi: sc18is602: Don't leak SPI master in probe error path spi: st-ssc4: Fix unbalanced pm_runtime_disable() in probe error path soc: qcom: smp2p: Safely acquire spinlock without IRQs mtd: parser: cmdline: Fix parsing of part-names with colons iio: buffer: Fix demux update iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume iio:pressure:mpl3115: Force alignment of buffer clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 xen-blkback: set ring->xenblkd to NULL after kthread_stop() PCI: Fix pci_slot_release() NULL pointer dereference Linux 4.9.249 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I4829a32e2ea6e76eefea716f35f42ee02b75c265
1439 lines
35 KiB
C
1439 lines
35 KiB
C
/* The industrial I/O core
|
|
*
|
|
* Copyright (c) 2008 Jonathan Cameron
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* Handling of buffer allocation / resizing.
|
|
*
|
|
*
|
|
* Things to look at here.
|
|
* - Better memory allocation techniques?
|
|
* - Alternative access techniques?
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/export.h>
|
|
#include <linux/device.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/cdev.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include "iio_core.h"
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
|
|
static const char * const iio_endian_prefix[] = {
|
|
[IIO_BE] = "be",
|
|
[IIO_LE] = "le",
|
|
};
|
|
|
|
static bool iio_buffer_is_active(struct iio_buffer *buf)
|
|
{
|
|
return !list_empty(&buf->buffer_list);
|
|
}
|
|
|
|
static size_t iio_buffer_data_available(struct iio_buffer *buf)
|
|
{
|
|
return buf->access->data_available(buf);
|
|
}
|
|
|
|
static int iio_buffer_flush_hwfifo(struct iio_dev *indio_dev,
|
|
struct iio_buffer *buf, size_t required)
|
|
{
|
|
if (!indio_dev->info->hwfifo_flush_to_buffer)
|
|
return -ENODEV;
|
|
|
|
return indio_dev->info->hwfifo_flush_to_buffer(indio_dev, required);
|
|
}
|
|
|
|
static bool iio_buffer_ready(struct iio_dev *indio_dev, struct iio_buffer *buf,
|
|
size_t to_wait, int to_flush)
|
|
{
|
|
size_t avail;
|
|
int flushed = 0;
|
|
|
|
/* wakeup if the device was unregistered */
|
|
if (!indio_dev->info)
|
|
return true;
|
|
|
|
/* drain the buffer if it was disabled */
|
|
if (!iio_buffer_is_active(buf)) {
|
|
to_wait = min_t(size_t, to_wait, 1);
|
|
to_flush = 0;
|
|
}
|
|
|
|
avail = iio_buffer_data_available(buf);
|
|
|
|
if (avail >= to_wait) {
|
|
/* force a flush for non-blocking reads */
|
|
if (!to_wait && avail < to_flush)
|
|
iio_buffer_flush_hwfifo(indio_dev, buf,
|
|
to_flush - avail);
|
|
return true;
|
|
}
|
|
|
|
if (to_flush)
|
|
flushed = iio_buffer_flush_hwfifo(indio_dev, buf,
|
|
to_wait - avail);
|
|
if (flushed <= 0)
|
|
return false;
|
|
|
|
if (avail + flushed >= to_wait)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* iio_buffer_read_first_n_outer() - chrdev read for buffer access
|
|
* @filp: File structure pointer for the char device
|
|
* @buf: Destination buffer for iio buffer read
|
|
* @n: First n bytes to read
|
|
* @f_ps: Long offset provided by the user as a seek position
|
|
*
|
|
* This function relies on all buffer implementations having an
|
|
* iio_buffer as their first element.
|
|
*
|
|
* Return: negative values corresponding to error codes or ret != 0
|
|
* for ending the reading activity
|
|
**/
|
|
ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
|
|
size_t n, loff_t *f_ps)
|
|
{
|
|
struct iio_dev *indio_dev = filp->private_data;
|
|
struct iio_buffer *rb = indio_dev->buffer;
|
|
DEFINE_WAIT_FUNC(wait, woken_wake_function);
|
|
size_t datum_size;
|
|
size_t to_wait;
|
|
int ret = 0;
|
|
|
|
if (!indio_dev->info)
|
|
return -ENODEV;
|
|
|
|
if (!rb || !rb->access->read_first_n)
|
|
return -EINVAL;
|
|
|
|
datum_size = rb->bytes_per_datum;
|
|
|
|
/*
|
|
* If datum_size is 0 there will never be anything to read from the
|
|
* buffer, so signal end of file now.
|
|
*/
|
|
if (!datum_size)
|
|
return 0;
|
|
|
|
if (filp->f_flags & O_NONBLOCK)
|
|
to_wait = 0;
|
|
else
|
|
to_wait = min_t(size_t, n / datum_size, rb->watermark);
|
|
|
|
add_wait_queue(&rb->pollq, &wait);
|
|
do {
|
|
if (!indio_dev->info) {
|
|
ret = -ENODEV;
|
|
break;
|
|
}
|
|
|
|
if (!iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size)) {
|
|
if (signal_pending(current)) {
|
|
ret = -ERESTARTSYS;
|
|
break;
|
|
}
|
|
|
|
wait_woken(&wait, TASK_INTERRUPTIBLE,
|
|
MAX_SCHEDULE_TIMEOUT);
|
|
continue;
|
|
}
|
|
|
|
ret = rb->access->read_first_n(rb, n, buf);
|
|
if (ret == 0 && (filp->f_flags & O_NONBLOCK))
|
|
ret = -EAGAIN;
|
|
} while (ret == 0);
|
|
remove_wait_queue(&rb->pollq, &wait);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* iio_buffer_poll() - poll the buffer to find out if it has data
|
|
* @filp: File structure pointer for device access
|
|
* @wait: Poll table structure pointer for which the driver adds
|
|
* a wait queue
|
|
*
|
|
* Return: (POLLIN | POLLRDNORM) if data is available for reading
|
|
* or 0 for other cases
|
|
*/
|
|
unsigned int iio_buffer_poll(struct file *filp,
|
|
struct poll_table_struct *wait)
|
|
{
|
|
struct iio_dev *indio_dev = filp->private_data;
|
|
struct iio_buffer *rb = indio_dev->buffer;
|
|
|
|
if (!indio_dev->info || rb == NULL)
|
|
return 0;
|
|
|
|
poll_wait(filp, &rb->pollq, wait);
|
|
if (iio_buffer_ready(indio_dev, rb, rb->watermark, 0))
|
|
return POLLIN | POLLRDNORM;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iio_buffer_wakeup_poll - Wakes up the buffer waitqueue
|
|
* @indio_dev: The IIO device
|
|
*
|
|
* Wakes up the event waitqueue used for poll(). Should usually
|
|
* be called when the device is unregistered.
|
|
*/
|
|
void iio_buffer_wakeup_poll(struct iio_dev *indio_dev)
|
|
{
|
|
if (!indio_dev->buffer)
|
|
return;
|
|
|
|
wake_up(&indio_dev->buffer->pollq);
|
|
}
|
|
|
|
void iio_buffer_init(struct iio_buffer *buffer)
|
|
{
|
|
INIT_LIST_HEAD(&buffer->demux_list);
|
|
INIT_LIST_HEAD(&buffer->buffer_list);
|
|
init_waitqueue_head(&buffer->pollq);
|
|
kref_init(&buffer->ref);
|
|
if (!buffer->watermark)
|
|
buffer->watermark = 1;
|
|
}
|
|
EXPORT_SYMBOL(iio_buffer_init);
|
|
|
|
static ssize_t iio_show_scan_index(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
return sprintf(buf, "%u\n", to_iio_dev_attr(attr)->c->scan_index);
|
|
}
|
|
|
|
static ssize_t iio_show_fixed_type(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
|
|
u8 type = this_attr->c->scan_type.endianness;
|
|
|
|
if (type == IIO_CPU) {
|
|
#ifdef __LITTLE_ENDIAN
|
|
type = IIO_LE;
|
|
#else
|
|
type = IIO_BE;
|
|
#endif
|
|
}
|
|
if (this_attr->c->scan_type.repeat > 1)
|
|
return sprintf(buf, "%s:%c%d/%dX%d>>%u\n",
|
|
iio_endian_prefix[type],
|
|
this_attr->c->scan_type.sign,
|
|
this_attr->c->scan_type.realbits,
|
|
this_attr->c->scan_type.storagebits,
|
|
this_attr->c->scan_type.repeat,
|
|
this_attr->c->scan_type.shift);
|
|
else
|
|
return sprintf(buf, "%s:%c%d/%d>>%u\n",
|
|
iio_endian_prefix[type],
|
|
this_attr->c->scan_type.sign,
|
|
this_attr->c->scan_type.realbits,
|
|
this_attr->c->scan_type.storagebits,
|
|
this_attr->c->scan_type.shift);
|
|
}
|
|
|
|
static ssize_t iio_scan_el_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret;
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
|
|
/* Ensure ret is 0 or 1. */
|
|
ret = !!test_bit(to_iio_dev_attr(attr)->address,
|
|
indio_dev->buffer->scan_mask);
|
|
|
|
return sprintf(buf, "%d\n", ret);
|
|
}
|
|
|
|
/* Note NULL used as error indicator as it doesn't make sense. */
|
|
static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks,
|
|
unsigned int masklength,
|
|
const unsigned long *mask,
|
|
bool strict)
|
|
{
|
|
if (bitmap_empty(mask, masklength))
|
|
return NULL;
|
|
while (*av_masks) {
|
|
if (strict) {
|
|
if (bitmap_equal(mask, av_masks, masklength))
|
|
return av_masks;
|
|
} else {
|
|
if (bitmap_subset(mask, av_masks, masklength))
|
|
return av_masks;
|
|
}
|
|
av_masks += BITS_TO_LONGS(masklength);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static bool iio_validate_scan_mask(struct iio_dev *indio_dev,
|
|
const unsigned long *mask)
|
|
{
|
|
if (!indio_dev->setup_ops->validate_scan_mask)
|
|
return true;
|
|
|
|
return indio_dev->setup_ops->validate_scan_mask(indio_dev, mask);
|
|
}
|
|
|
|
/**
|
|
* iio_scan_mask_set() - set particular bit in the scan mask
|
|
* @indio_dev: the iio device
|
|
* @buffer: the buffer whose scan mask we are interested in
|
|
* @bit: the bit to be set.
|
|
*
|
|
* Note that at this point we have no way of knowing what other
|
|
* buffers might request, hence this code only verifies that the
|
|
* individual buffers request is plausible.
|
|
*/
|
|
static int iio_scan_mask_set(struct iio_dev *indio_dev,
|
|
struct iio_buffer *buffer, int bit)
|
|
{
|
|
const unsigned long *mask;
|
|
unsigned long *trialmask;
|
|
|
|
trialmask = kmalloc(sizeof(*trialmask)*
|
|
BITS_TO_LONGS(indio_dev->masklength),
|
|
GFP_KERNEL);
|
|
|
|
if (trialmask == NULL)
|
|
return -ENOMEM;
|
|
if (!indio_dev->masklength) {
|
|
WARN(1, "Trying to set scanmask prior to registering buffer\n");
|
|
goto err_invalid_mask;
|
|
}
|
|
bitmap_copy(trialmask, buffer->scan_mask, indio_dev->masklength);
|
|
set_bit(bit, trialmask);
|
|
|
|
if (!iio_validate_scan_mask(indio_dev, trialmask))
|
|
goto err_invalid_mask;
|
|
|
|
if (indio_dev->available_scan_masks) {
|
|
mask = iio_scan_mask_match(indio_dev->available_scan_masks,
|
|
indio_dev->masklength,
|
|
trialmask, false);
|
|
if (!mask)
|
|
goto err_invalid_mask;
|
|
}
|
|
bitmap_copy(buffer->scan_mask, trialmask, indio_dev->masklength);
|
|
|
|
kfree(trialmask);
|
|
|
|
return 0;
|
|
|
|
err_invalid_mask:
|
|
kfree(trialmask);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int iio_scan_mask_clear(struct iio_buffer *buffer, int bit)
|
|
{
|
|
clear_bit(bit, buffer->scan_mask);
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t iio_scan_el_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t len)
|
|
{
|
|
int ret;
|
|
bool state;
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct iio_buffer *buffer = indio_dev->buffer;
|
|
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
|
|
|
|
ret = strtobool(buf, &state);
|
|
if (ret < 0)
|
|
return ret;
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (iio_buffer_is_active(indio_dev->buffer)) {
|
|
ret = -EBUSY;
|
|
goto error_ret;
|
|
}
|
|
ret = iio_scan_mask_query(indio_dev, buffer, this_attr->address);
|
|
if (ret < 0)
|
|
goto error_ret;
|
|
if (!state && ret) {
|
|
ret = iio_scan_mask_clear(buffer, this_attr->address);
|
|
if (ret)
|
|
goto error_ret;
|
|
} else if (state && !ret) {
|
|
ret = iio_scan_mask_set(indio_dev, buffer, this_attr->address);
|
|
if (ret)
|
|
goto error_ret;
|
|
}
|
|
|
|
error_ret:
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return ret < 0 ? ret : len;
|
|
|
|
}
|
|
|
|
static ssize_t iio_scan_el_ts_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
return sprintf(buf, "%d\n", indio_dev->buffer->scan_timestamp);
|
|
}
|
|
|
|
static ssize_t iio_scan_el_ts_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t len)
|
|
{
|
|
int ret;
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
bool state;
|
|
|
|
ret = strtobool(buf, &state);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (iio_buffer_is_active(indio_dev->buffer)) {
|
|
ret = -EBUSY;
|
|
goto error_ret;
|
|
}
|
|
indio_dev->buffer->scan_timestamp = state;
|
|
error_ret:
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return ret ? ret : len;
|
|
}
|
|
|
|
static int iio_buffer_add_channel_sysfs(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
int ret, attrcount = 0;
|
|
struct iio_buffer *buffer = indio_dev->buffer;
|
|
|
|
ret = __iio_add_chan_devattr("index",
|
|
chan,
|
|
&iio_show_scan_index,
|
|
NULL,
|
|
0,
|
|
IIO_SEPARATE,
|
|
&indio_dev->dev,
|
|
&buffer->scan_el_dev_attr_list);
|
|
if (ret)
|
|
return ret;
|
|
attrcount++;
|
|
ret = __iio_add_chan_devattr("type",
|
|
chan,
|
|
&iio_show_fixed_type,
|
|
NULL,
|
|
0,
|
|
0,
|
|
&indio_dev->dev,
|
|
&buffer->scan_el_dev_attr_list);
|
|
if (ret)
|
|
return ret;
|
|
attrcount++;
|
|
if (chan->type != IIO_TIMESTAMP)
|
|
ret = __iio_add_chan_devattr("en",
|
|
chan,
|
|
&iio_scan_el_show,
|
|
&iio_scan_el_store,
|
|
chan->scan_index,
|
|
0,
|
|
&indio_dev->dev,
|
|
&buffer->scan_el_dev_attr_list);
|
|
else
|
|
ret = __iio_add_chan_devattr("en",
|
|
chan,
|
|
&iio_scan_el_ts_show,
|
|
&iio_scan_el_ts_store,
|
|
chan->scan_index,
|
|
0,
|
|
&indio_dev->dev,
|
|
&buffer->scan_el_dev_attr_list);
|
|
if (ret)
|
|
return ret;
|
|
attrcount++;
|
|
ret = attrcount;
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t iio_buffer_read_length(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct iio_buffer *buffer = indio_dev->buffer;
|
|
|
|
return sprintf(buf, "%d\n", buffer->length);
|
|
}
|
|
|
|
static ssize_t iio_buffer_write_length(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct iio_buffer *buffer = indio_dev->buffer;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = kstrtouint(buf, 10, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val == buffer->length)
|
|
return len;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (iio_buffer_is_active(indio_dev->buffer)) {
|
|
ret = -EBUSY;
|
|
} else {
|
|
buffer->access->set_length(buffer, val);
|
|
ret = 0;
|
|
}
|
|
if (ret)
|
|
goto out;
|
|
if (buffer->length && buffer->length < buffer->watermark)
|
|
buffer->watermark = buffer->length;
|
|
out:
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return ret ? ret : len;
|
|
}
|
|
|
|
static ssize_t iio_buffer_show_enable(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
return sprintf(buf, "%d\n", iio_buffer_is_active(indio_dev->buffer));
|
|
}
|
|
|
|
static unsigned int iio_storage_bytes_for_si(struct iio_dev *indio_dev,
|
|
unsigned int scan_index)
|
|
{
|
|
const struct iio_chan_spec *ch;
|
|
unsigned int bytes;
|
|
|
|
ch = iio_find_channel_from_si(indio_dev, scan_index);
|
|
bytes = ch->scan_type.storagebits / 8;
|
|
if (ch->scan_type.repeat > 1)
|
|
bytes *= ch->scan_type.repeat;
|
|
return bytes;
|
|
}
|
|
|
|
static unsigned int iio_storage_bytes_for_timestamp(struct iio_dev *indio_dev)
|
|
{
|
|
return iio_storage_bytes_for_si(indio_dev,
|
|
indio_dev->scan_index_timestamp);
|
|
}
|
|
|
|
static int iio_compute_scan_bytes(struct iio_dev *indio_dev,
|
|
const unsigned long *mask, bool timestamp)
|
|
{
|
|
unsigned bytes = 0;
|
|
int length, i, largest = 0;
|
|
|
|
/* How much space will the demuxed element take? */
|
|
for_each_set_bit(i, mask,
|
|
indio_dev->masklength) {
|
|
length = iio_storage_bytes_for_si(indio_dev, i);
|
|
bytes = ALIGN(bytes, length);
|
|
bytes += length;
|
|
largest = max(largest, length);
|
|
}
|
|
|
|
if (timestamp) {
|
|
length = iio_storage_bytes_for_timestamp(indio_dev);
|
|
bytes = ALIGN(bytes, length);
|
|
bytes += length;
|
|
largest = max(largest, length);
|
|
}
|
|
|
|
bytes = ALIGN(bytes, largest);
|
|
return bytes;
|
|
}
|
|
|
|
static void iio_buffer_activate(struct iio_dev *indio_dev,
|
|
struct iio_buffer *buffer)
|
|
{
|
|
iio_buffer_get(buffer);
|
|
list_add(&buffer->buffer_list, &indio_dev->buffer_list);
|
|
}
|
|
|
|
static void iio_buffer_deactivate(struct iio_buffer *buffer)
|
|
{
|
|
list_del_init(&buffer->buffer_list);
|
|
wake_up_interruptible(&buffer->pollq);
|
|
iio_buffer_put(buffer);
|
|
}
|
|
|
|
static void iio_buffer_deactivate_all(struct iio_dev *indio_dev)
|
|
{
|
|
struct iio_buffer *buffer, *_buffer;
|
|
|
|
list_for_each_entry_safe(buffer, _buffer,
|
|
&indio_dev->buffer_list, buffer_list)
|
|
iio_buffer_deactivate(buffer);
|
|
}
|
|
|
|
static int iio_buffer_enable(struct iio_buffer *buffer,
|
|
struct iio_dev *indio_dev)
|
|
{
|
|
if (!buffer->access->enable)
|
|
return 0;
|
|
return buffer->access->enable(buffer, indio_dev);
|
|
}
|
|
|
|
static int iio_buffer_disable(struct iio_buffer *buffer,
|
|
struct iio_dev *indio_dev)
|
|
{
|
|
if (!buffer->access->disable)
|
|
return 0;
|
|
return buffer->access->disable(buffer, indio_dev);
|
|
}
|
|
|
|
static void iio_buffer_update_bytes_per_datum(struct iio_dev *indio_dev,
|
|
struct iio_buffer *buffer)
|
|
{
|
|
unsigned int bytes;
|
|
|
|
if (!buffer->access->set_bytes_per_datum)
|
|
return;
|
|
|
|
bytes = iio_compute_scan_bytes(indio_dev, buffer->scan_mask,
|
|
buffer->scan_timestamp);
|
|
|
|
buffer->access->set_bytes_per_datum(buffer, bytes);
|
|
}
|
|
|
|
static int iio_buffer_request_update(struct iio_dev *indio_dev,
|
|
struct iio_buffer *buffer)
|
|
{
|
|
int ret;
|
|
|
|
iio_buffer_update_bytes_per_datum(indio_dev, buffer);
|
|
if (buffer->access->request_update) {
|
|
ret = buffer->access->request_update(buffer);
|
|
if (ret) {
|
|
dev_dbg(&indio_dev->dev,
|
|
"Buffer not started: buffer parameter update failed (%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void iio_free_scan_mask(struct iio_dev *indio_dev,
|
|
const unsigned long *mask)
|
|
{
|
|
/* If the mask is dynamically allocated free it, otherwise do nothing */
|
|
if (!indio_dev->available_scan_masks)
|
|
kfree(mask);
|
|
}
|
|
|
|
struct iio_device_config {
|
|
unsigned int mode;
|
|
unsigned int watermark;
|
|
const unsigned long *scan_mask;
|
|
unsigned int scan_bytes;
|
|
bool scan_timestamp;
|
|
};
|
|
|
|
static int iio_verify_update(struct iio_dev *indio_dev,
|
|
struct iio_buffer *insert_buffer, struct iio_buffer *remove_buffer,
|
|
struct iio_device_config *config)
|
|
{
|
|
unsigned long *compound_mask;
|
|
const unsigned long *scan_mask;
|
|
bool strict_scanmask = false;
|
|
struct iio_buffer *buffer;
|
|
bool scan_timestamp;
|
|
unsigned int modes;
|
|
|
|
memset(config, 0, sizeof(*config));
|
|
config->watermark = ~0;
|
|
|
|
/*
|
|
* If there is just one buffer and we are removing it there is nothing
|
|
* to verify.
|
|
*/
|
|
if (remove_buffer && !insert_buffer &&
|
|
list_is_singular(&indio_dev->buffer_list))
|
|
return 0;
|
|
|
|
modes = indio_dev->modes;
|
|
|
|
list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list) {
|
|
if (buffer == remove_buffer)
|
|
continue;
|
|
modes &= buffer->access->modes;
|
|
config->watermark = min(config->watermark, buffer->watermark);
|
|
}
|
|
|
|
if (insert_buffer) {
|
|
modes &= insert_buffer->access->modes;
|
|
config->watermark = min(config->watermark,
|
|
insert_buffer->watermark);
|
|
}
|
|
|
|
/* Definitely possible for devices to support both of these. */
|
|
if ((modes & INDIO_BUFFER_TRIGGERED) && indio_dev->trig) {
|
|
config->mode = INDIO_BUFFER_TRIGGERED;
|
|
} else if (modes & INDIO_BUFFER_HARDWARE) {
|
|
/*
|
|
* Keep things simple for now and only allow a single buffer to
|
|
* be connected in hardware mode.
|
|
*/
|
|
if (insert_buffer && !list_empty(&indio_dev->buffer_list))
|
|
return -EINVAL;
|
|
config->mode = INDIO_BUFFER_HARDWARE;
|
|
strict_scanmask = true;
|
|
} else if (modes & INDIO_BUFFER_SOFTWARE) {
|
|
config->mode = INDIO_BUFFER_SOFTWARE;
|
|
} else {
|
|
/* Can only occur on first buffer */
|
|
if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
|
|
dev_dbg(&indio_dev->dev, "Buffer not started: no trigger\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* What scan mask do we actually have? */
|
|
compound_mask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
|
|
sizeof(long), GFP_KERNEL);
|
|
if (compound_mask == NULL)
|
|
return -ENOMEM;
|
|
|
|
scan_timestamp = false;
|
|
|
|
list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list) {
|
|
if (buffer == remove_buffer)
|
|
continue;
|
|
bitmap_or(compound_mask, compound_mask, buffer->scan_mask,
|
|
indio_dev->masklength);
|
|
scan_timestamp |= buffer->scan_timestamp;
|
|
}
|
|
|
|
if (insert_buffer) {
|
|
bitmap_or(compound_mask, compound_mask,
|
|
insert_buffer->scan_mask, indio_dev->masklength);
|
|
scan_timestamp |= insert_buffer->scan_timestamp;
|
|
}
|
|
|
|
if (indio_dev->available_scan_masks) {
|
|
scan_mask = iio_scan_mask_match(indio_dev->available_scan_masks,
|
|
indio_dev->masklength,
|
|
compound_mask,
|
|
strict_scanmask);
|
|
kfree(compound_mask);
|
|
if (scan_mask == NULL)
|
|
return -EINVAL;
|
|
} else {
|
|
scan_mask = compound_mask;
|
|
}
|
|
|
|
config->scan_bytes = iio_compute_scan_bytes(indio_dev,
|
|
scan_mask, scan_timestamp);
|
|
config->scan_mask = scan_mask;
|
|
config->scan_timestamp = scan_timestamp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iio_enable_buffers(struct iio_dev *indio_dev,
|
|
struct iio_device_config *config)
|
|
{
|
|
struct iio_buffer *buffer;
|
|
int ret;
|
|
|
|
indio_dev->active_scan_mask = config->scan_mask;
|
|
indio_dev->scan_timestamp = config->scan_timestamp;
|
|
indio_dev->scan_bytes = config->scan_bytes;
|
|
|
|
iio_update_demux(indio_dev);
|
|
|
|
/* Wind up again */
|
|
if (indio_dev->setup_ops->preenable) {
|
|
ret = indio_dev->setup_ops->preenable(indio_dev);
|
|
if (ret) {
|
|
dev_dbg(&indio_dev->dev,
|
|
"Buffer not started: buffer preenable failed (%d)\n", ret);
|
|
goto err_undo_config;
|
|
}
|
|
}
|
|
|
|
if (indio_dev->info->update_scan_mode) {
|
|
ret = indio_dev->info
|
|
->update_scan_mode(indio_dev,
|
|
indio_dev->active_scan_mask);
|
|
if (ret < 0) {
|
|
dev_dbg(&indio_dev->dev,
|
|
"Buffer not started: update scan mode failed (%d)\n",
|
|
ret);
|
|
goto err_run_postdisable;
|
|
}
|
|
}
|
|
|
|
if (indio_dev->info->hwfifo_set_watermark)
|
|
indio_dev->info->hwfifo_set_watermark(indio_dev,
|
|
config->watermark);
|
|
|
|
list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list) {
|
|
ret = iio_buffer_enable(buffer, indio_dev);
|
|
if (ret)
|
|
goto err_disable_buffers;
|
|
}
|
|
|
|
indio_dev->currentmode = config->mode;
|
|
|
|
if (indio_dev->setup_ops->postenable) {
|
|
ret = indio_dev->setup_ops->postenable(indio_dev);
|
|
if (ret) {
|
|
dev_dbg(&indio_dev->dev,
|
|
"Buffer not started: postenable failed (%d)\n", ret);
|
|
goto err_disable_buffers;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_disable_buffers:
|
|
list_for_each_entry_continue_reverse(buffer, &indio_dev->buffer_list,
|
|
buffer_list)
|
|
iio_buffer_disable(buffer, indio_dev);
|
|
err_run_postdisable:
|
|
indio_dev->currentmode = INDIO_DIRECT_MODE;
|
|
if (indio_dev->setup_ops->postdisable)
|
|
indio_dev->setup_ops->postdisable(indio_dev);
|
|
err_undo_config:
|
|
indio_dev->active_scan_mask = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int iio_disable_buffers(struct iio_dev *indio_dev)
|
|
{
|
|
struct iio_buffer *buffer;
|
|
int ret = 0;
|
|
int ret2;
|
|
|
|
/* Wind down existing buffers - iff there are any */
|
|
if (list_empty(&indio_dev->buffer_list))
|
|
return 0;
|
|
|
|
/*
|
|
* If things go wrong at some step in disable we still need to continue
|
|
* to perform the other steps, otherwise we leave the device in a
|
|
* inconsistent state. We return the error code for the first error we
|
|
* encountered.
|
|
*/
|
|
|
|
if (indio_dev->setup_ops->predisable) {
|
|
ret2 = indio_dev->setup_ops->predisable(indio_dev);
|
|
if (ret2 && !ret)
|
|
ret = ret2;
|
|
}
|
|
|
|
list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list) {
|
|
ret2 = iio_buffer_disable(buffer, indio_dev);
|
|
if (ret2 && !ret)
|
|
ret = ret2;
|
|
}
|
|
|
|
indio_dev->currentmode = INDIO_DIRECT_MODE;
|
|
|
|
if (indio_dev->setup_ops->postdisable) {
|
|
ret2 = indio_dev->setup_ops->postdisable(indio_dev);
|
|
if (ret2 && !ret)
|
|
ret = ret2;
|
|
}
|
|
|
|
iio_free_scan_mask(indio_dev, indio_dev->active_scan_mask);
|
|
indio_dev->active_scan_mask = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __iio_update_buffers(struct iio_dev *indio_dev,
|
|
struct iio_buffer *insert_buffer,
|
|
struct iio_buffer *remove_buffer)
|
|
{
|
|
struct iio_device_config new_config;
|
|
int ret;
|
|
|
|
ret = iio_verify_update(indio_dev, insert_buffer, remove_buffer,
|
|
&new_config);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (insert_buffer) {
|
|
ret = iio_buffer_request_update(indio_dev, insert_buffer);
|
|
if (ret)
|
|
goto err_free_config;
|
|
}
|
|
|
|
ret = iio_disable_buffers(indio_dev);
|
|
if (ret)
|
|
goto err_deactivate_all;
|
|
|
|
if (remove_buffer)
|
|
iio_buffer_deactivate(remove_buffer);
|
|
if (insert_buffer)
|
|
iio_buffer_activate(indio_dev, insert_buffer);
|
|
|
|
/* If no buffers in list, we are done */
|
|
if (list_empty(&indio_dev->buffer_list))
|
|
return 0;
|
|
|
|
ret = iio_enable_buffers(indio_dev, &new_config);
|
|
if (ret)
|
|
goto err_deactivate_all;
|
|
|
|
return 0;
|
|
|
|
err_deactivate_all:
|
|
/*
|
|
* We've already verified that the config is valid earlier. If things go
|
|
* wrong in either enable or disable the most likely reason is an IO
|
|
* error from the device. In this case there is no good recovery
|
|
* strategy. Just make sure to disable everything and leave the device
|
|
* in a sane state. With a bit of luck the device might come back to
|
|
* life again later and userspace can try again.
|
|
*/
|
|
iio_buffer_deactivate_all(indio_dev);
|
|
|
|
err_free_config:
|
|
iio_free_scan_mask(indio_dev, new_config.scan_mask);
|
|
return ret;
|
|
}
|
|
|
|
int iio_update_buffers(struct iio_dev *indio_dev,
|
|
struct iio_buffer *insert_buffer,
|
|
struct iio_buffer *remove_buffer)
|
|
{
|
|
int ret;
|
|
|
|
if (insert_buffer == remove_buffer)
|
|
return 0;
|
|
|
|
mutex_lock(&indio_dev->info_exist_lock);
|
|
mutex_lock(&indio_dev->mlock);
|
|
|
|
if (insert_buffer && iio_buffer_is_active(insert_buffer))
|
|
insert_buffer = NULL;
|
|
|
|
if (remove_buffer && !iio_buffer_is_active(remove_buffer))
|
|
remove_buffer = NULL;
|
|
|
|
if (!insert_buffer && !remove_buffer) {
|
|
ret = 0;
|
|
goto out_unlock;
|
|
}
|
|
|
|
if (indio_dev->info == NULL) {
|
|
ret = -ENODEV;
|
|
goto out_unlock;
|
|
}
|
|
|
|
ret = __iio_update_buffers(indio_dev, insert_buffer, remove_buffer);
|
|
|
|
out_unlock:
|
|
mutex_unlock(&indio_dev->mlock);
|
|
mutex_unlock(&indio_dev->info_exist_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(iio_update_buffers);
|
|
|
|
void iio_disable_all_buffers(struct iio_dev *indio_dev)
|
|
{
|
|
iio_disable_buffers(indio_dev);
|
|
iio_buffer_deactivate_all(indio_dev);
|
|
}
|
|
|
|
static ssize_t iio_buffer_store_enable(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t len)
|
|
{
|
|
int ret;
|
|
bool requested_state;
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
bool inlist;
|
|
|
|
ret = strtobool(buf, &requested_state);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
|
|
/* Find out if it is in the list */
|
|
inlist = iio_buffer_is_active(indio_dev->buffer);
|
|
/* Already in desired state */
|
|
if (inlist == requested_state)
|
|
goto done;
|
|
|
|
if (requested_state)
|
|
ret = __iio_update_buffers(indio_dev,
|
|
indio_dev->buffer, NULL);
|
|
else
|
|
ret = __iio_update_buffers(indio_dev,
|
|
NULL, indio_dev->buffer);
|
|
|
|
done:
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return (ret < 0) ? ret : len;
|
|
}
|
|
|
|
static const char * const iio_scan_elements_group_name = "scan_elements";
|
|
|
|
static ssize_t iio_buffer_show_watermark(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct iio_buffer *buffer = indio_dev->buffer;
|
|
|
|
return sprintf(buf, "%u\n", buffer->watermark);
|
|
}
|
|
|
|
static ssize_t iio_buffer_store_watermark(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t len)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct iio_buffer *buffer = indio_dev->buffer;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = kstrtouint(buf, 10, &val);
|
|
if (ret)
|
|
return ret;
|
|
if (!val)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
|
|
if (val > buffer->length) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if (iio_buffer_is_active(indio_dev->buffer)) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
buffer->watermark = val;
|
|
out:
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return ret ? ret : len;
|
|
}
|
|
|
|
static DEVICE_ATTR(length, S_IRUGO | S_IWUSR, iio_buffer_read_length,
|
|
iio_buffer_write_length);
|
|
static struct device_attribute dev_attr_length_ro = __ATTR(length,
|
|
S_IRUGO, iio_buffer_read_length, NULL);
|
|
static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR,
|
|
iio_buffer_show_enable, iio_buffer_store_enable);
|
|
static DEVICE_ATTR(watermark, S_IRUGO | S_IWUSR,
|
|
iio_buffer_show_watermark, iio_buffer_store_watermark);
|
|
static struct device_attribute dev_attr_watermark_ro = __ATTR(watermark,
|
|
S_IRUGO, iio_buffer_show_watermark, NULL);
|
|
|
|
static struct attribute *iio_buffer_attrs[] = {
|
|
&dev_attr_length.attr,
|
|
&dev_attr_enable.attr,
|
|
&dev_attr_watermark.attr,
|
|
};
|
|
|
|
int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
|
|
{
|
|
struct iio_dev_attr *p;
|
|
struct attribute **attr;
|
|
struct iio_buffer *buffer = indio_dev->buffer;
|
|
int ret, i, attrn, attrcount, attrcount_orig = 0;
|
|
const struct iio_chan_spec *channels;
|
|
|
|
channels = indio_dev->channels;
|
|
if (channels) {
|
|
int ml = indio_dev->masklength;
|
|
|
|
for (i = 0; i < indio_dev->num_channels; i++)
|
|
ml = max(ml, channels[i].scan_index + 1);
|
|
indio_dev->masklength = ml;
|
|
}
|
|
|
|
if (!buffer)
|
|
return 0;
|
|
|
|
attrcount = 0;
|
|
if (buffer->attrs) {
|
|
while (buffer->attrs[attrcount] != NULL)
|
|
attrcount++;
|
|
}
|
|
|
|
attr = kcalloc(attrcount + ARRAY_SIZE(iio_buffer_attrs) + 1,
|
|
sizeof(struct attribute *), GFP_KERNEL);
|
|
if (!attr)
|
|
return -ENOMEM;
|
|
|
|
memcpy(attr, iio_buffer_attrs, sizeof(iio_buffer_attrs));
|
|
if (!buffer->access->set_length)
|
|
attr[0] = &dev_attr_length_ro.attr;
|
|
|
|
if (buffer->access->flags & INDIO_BUFFER_FLAG_FIXED_WATERMARK)
|
|
attr[2] = &dev_attr_watermark_ro.attr;
|
|
|
|
if (buffer->attrs)
|
|
memcpy(&attr[ARRAY_SIZE(iio_buffer_attrs)], buffer->attrs,
|
|
sizeof(struct attribute *) * attrcount);
|
|
|
|
attr[attrcount + ARRAY_SIZE(iio_buffer_attrs)] = NULL;
|
|
|
|
buffer->buffer_group.name = "buffer";
|
|
buffer->buffer_group.attrs = attr;
|
|
|
|
indio_dev->groups[indio_dev->groupcounter++] = &buffer->buffer_group;
|
|
|
|
if (buffer->scan_el_attrs != NULL) {
|
|
attr = buffer->scan_el_attrs->attrs;
|
|
while (*attr++ != NULL)
|
|
attrcount_orig++;
|
|
}
|
|
attrcount = attrcount_orig;
|
|
INIT_LIST_HEAD(&buffer->scan_el_dev_attr_list);
|
|
channels = indio_dev->channels;
|
|
if (channels) {
|
|
/* new magic */
|
|
for (i = 0; i < indio_dev->num_channels; i++) {
|
|
if (channels[i].scan_index < 0)
|
|
continue;
|
|
|
|
ret = iio_buffer_add_channel_sysfs(indio_dev,
|
|
&channels[i]);
|
|
if (ret < 0)
|
|
goto error_cleanup_dynamic;
|
|
attrcount += ret;
|
|
if (channels[i].type == IIO_TIMESTAMP)
|
|
indio_dev->scan_index_timestamp =
|
|
channels[i].scan_index;
|
|
}
|
|
if (indio_dev->masklength && buffer->scan_mask == NULL) {
|
|
buffer->scan_mask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
|
|
sizeof(*buffer->scan_mask),
|
|
GFP_KERNEL);
|
|
if (buffer->scan_mask == NULL) {
|
|
ret = -ENOMEM;
|
|
goto error_cleanup_dynamic;
|
|
}
|
|
}
|
|
}
|
|
|
|
buffer->scan_el_group.name = iio_scan_elements_group_name;
|
|
|
|
buffer->scan_el_group.attrs = kcalloc(attrcount + 1,
|
|
sizeof(buffer->scan_el_group.attrs[0]),
|
|
GFP_KERNEL);
|
|
if (buffer->scan_el_group.attrs == NULL) {
|
|
ret = -ENOMEM;
|
|
goto error_free_scan_mask;
|
|
}
|
|
if (buffer->scan_el_attrs)
|
|
memcpy(buffer->scan_el_group.attrs, buffer->scan_el_attrs,
|
|
sizeof(buffer->scan_el_group.attrs[0])*attrcount_orig);
|
|
attrn = attrcount_orig;
|
|
|
|
list_for_each_entry(p, &buffer->scan_el_dev_attr_list, l)
|
|
buffer->scan_el_group.attrs[attrn++] = &p->dev_attr.attr;
|
|
indio_dev->groups[indio_dev->groupcounter++] = &buffer->scan_el_group;
|
|
|
|
return 0;
|
|
|
|
error_free_scan_mask:
|
|
kfree(buffer->scan_mask);
|
|
error_cleanup_dynamic:
|
|
iio_free_chan_devattr_list(&buffer->scan_el_dev_attr_list);
|
|
kfree(indio_dev->buffer->buffer_group.attrs);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void iio_buffer_free_sysfs_and_mask(struct iio_dev *indio_dev)
|
|
{
|
|
if (!indio_dev->buffer)
|
|
return;
|
|
|
|
kfree(indio_dev->buffer->scan_mask);
|
|
kfree(indio_dev->buffer->buffer_group.attrs);
|
|
kfree(indio_dev->buffer->scan_el_group.attrs);
|
|
iio_free_chan_devattr_list(&indio_dev->buffer->scan_el_dev_attr_list);
|
|
}
|
|
|
|
/**
|
|
* iio_validate_scan_mask_onehot() - Validates that exactly one channel is selected
|
|
* @indio_dev: the iio device
|
|
* @mask: scan mask to be checked
|
|
*
|
|
* Return true if exactly one bit is set in the scan mask, false otherwise. It
|
|
* can be used for devices where only one channel can be active for sampling at
|
|
* a time.
|
|
*/
|
|
bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev,
|
|
const unsigned long *mask)
|
|
{
|
|
return bitmap_weight(mask, indio_dev->masklength) == 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(iio_validate_scan_mask_onehot);
|
|
|
|
int iio_scan_mask_query(struct iio_dev *indio_dev,
|
|
struct iio_buffer *buffer, int bit)
|
|
{
|
|
if (bit > indio_dev->masklength)
|
|
return -EINVAL;
|
|
|
|
if (!buffer->scan_mask)
|
|
return 0;
|
|
|
|
/* Ensure return value is 0 or 1. */
|
|
return !!test_bit(bit, buffer->scan_mask);
|
|
};
|
|
EXPORT_SYMBOL_GPL(iio_scan_mask_query);
|
|
|
|
/**
|
|
* struct iio_demux_table - table describing demux memcpy ops
|
|
* @from: index to copy from
|
|
* @to: index to copy to
|
|
* @length: how many bytes to copy
|
|
* @l: list head used for management
|
|
*/
|
|
struct iio_demux_table {
|
|
unsigned from;
|
|
unsigned to;
|
|
unsigned length;
|
|
struct list_head l;
|
|
};
|
|
|
|
static const void *iio_demux(struct iio_buffer *buffer,
|
|
const void *datain)
|
|
{
|
|
struct iio_demux_table *t;
|
|
|
|
if (list_empty(&buffer->demux_list))
|
|
return datain;
|
|
list_for_each_entry(t, &buffer->demux_list, l)
|
|
memcpy(buffer->demux_bounce + t->to,
|
|
datain + t->from, t->length);
|
|
|
|
return buffer->demux_bounce;
|
|
}
|
|
|
|
static int iio_push_to_buffer(struct iio_buffer *buffer, const void *data)
|
|
{
|
|
const void *dataout = iio_demux(buffer, data);
|
|
int ret;
|
|
|
|
ret = buffer->access->store_to(buffer, dataout);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* We can't just test for watermark to decide if we wake the poll queue
|
|
* because read may request less samples than the watermark.
|
|
*/
|
|
wake_up_interruptible_poll(&buffer->pollq, POLLIN | POLLRDNORM);
|
|
return 0;
|
|
}
|
|
|
|
static void iio_buffer_demux_free(struct iio_buffer *buffer)
|
|
{
|
|
struct iio_demux_table *p, *q;
|
|
list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
|
|
list_del(&p->l);
|
|
kfree(p);
|
|
}
|
|
}
|
|
|
|
|
|
int iio_push_to_buffers(struct iio_dev *indio_dev, const void *data)
|
|
{
|
|
int ret;
|
|
struct iio_buffer *buf;
|
|
|
|
list_for_each_entry(buf, &indio_dev->buffer_list, buffer_list) {
|
|
ret = iio_push_to_buffer(buf, data);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(iio_push_to_buffers);
|
|
|
|
static int iio_buffer_add_demux(struct iio_buffer *buffer,
|
|
struct iio_demux_table **p, unsigned int in_loc, unsigned int out_loc,
|
|
unsigned int length)
|
|
{
|
|
|
|
if (*p && (*p)->from + (*p)->length == in_loc &&
|
|
(*p)->to + (*p)->length == out_loc) {
|
|
(*p)->length += length;
|
|
} else {
|
|
*p = kmalloc(sizeof(**p), GFP_KERNEL);
|
|
if (*p == NULL)
|
|
return -ENOMEM;
|
|
(*p)->from = in_loc;
|
|
(*p)->to = out_loc;
|
|
(*p)->length = length;
|
|
list_add_tail(&(*p)->l, &buffer->demux_list);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iio_buffer_update_demux(struct iio_dev *indio_dev,
|
|
struct iio_buffer *buffer)
|
|
{
|
|
int ret, in_ind = -1, out_ind, length;
|
|
unsigned in_loc = 0, out_loc = 0;
|
|
struct iio_demux_table *p = NULL;
|
|
|
|
/* Clear out any old demux */
|
|
iio_buffer_demux_free(buffer);
|
|
kfree(buffer->demux_bounce);
|
|
buffer->demux_bounce = NULL;
|
|
|
|
/* First work out which scan mode we will actually have */
|
|
if (bitmap_equal(indio_dev->active_scan_mask,
|
|
buffer->scan_mask,
|
|
indio_dev->masklength))
|
|
return 0;
|
|
|
|
/* Now we have the two masks, work from least sig and build up sizes */
|
|
for_each_set_bit(out_ind,
|
|
buffer->scan_mask,
|
|
indio_dev->masklength) {
|
|
in_ind = find_next_bit(indio_dev->active_scan_mask,
|
|
indio_dev->masklength,
|
|
in_ind + 1);
|
|
while (in_ind != out_ind) {
|
|
length = iio_storage_bytes_for_si(indio_dev, in_ind);
|
|
/* Make sure we are aligned */
|
|
in_loc = roundup(in_loc, length) + length;
|
|
in_ind = find_next_bit(indio_dev->active_scan_mask,
|
|
indio_dev->masklength,
|
|
in_ind + 1);
|
|
}
|
|
length = iio_storage_bytes_for_si(indio_dev, in_ind);
|
|
out_loc = roundup(out_loc, length);
|
|
in_loc = roundup(in_loc, length);
|
|
ret = iio_buffer_add_demux(buffer, &p, in_loc, out_loc, length);
|
|
if (ret)
|
|
goto error_clear_mux_table;
|
|
out_loc += length;
|
|
in_loc += length;
|
|
}
|
|
/* Relies on scan_timestamp being last */
|
|
if (buffer->scan_timestamp) {
|
|
length = iio_storage_bytes_for_timestamp(indio_dev);
|
|
out_loc = roundup(out_loc, length);
|
|
in_loc = roundup(in_loc, length);
|
|
ret = iio_buffer_add_demux(buffer, &p, in_loc, out_loc, length);
|
|
if (ret)
|
|
goto error_clear_mux_table;
|
|
out_loc += length;
|
|
in_loc += length;
|
|
}
|
|
buffer->demux_bounce = kzalloc(out_loc, GFP_KERNEL);
|
|
if (buffer->demux_bounce == NULL) {
|
|
ret = -ENOMEM;
|
|
goto error_clear_mux_table;
|
|
}
|
|
return 0;
|
|
|
|
error_clear_mux_table:
|
|
iio_buffer_demux_free(buffer);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int iio_update_demux(struct iio_dev *indio_dev)
|
|
{
|
|
struct iio_buffer *buffer;
|
|
int ret;
|
|
|
|
list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list) {
|
|
ret = iio_buffer_update_demux(indio_dev, buffer);
|
|
if (ret < 0)
|
|
goto error_clear_mux_table;
|
|
}
|
|
return 0;
|
|
|
|
error_clear_mux_table:
|
|
list_for_each_entry(buffer, &indio_dev->buffer_list, buffer_list)
|
|
iio_buffer_demux_free(buffer);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(iio_update_demux);
|
|
|
|
/**
|
|
* iio_buffer_release() - Free a buffer's resources
|
|
* @ref: Pointer to the kref embedded in the iio_buffer struct
|
|
*
|
|
* This function is called when the last reference to the buffer has been
|
|
* dropped. It will typically free all resources allocated by the buffer. Do not
|
|
* call this function manually, always use iio_buffer_put() when done using a
|
|
* buffer.
|
|
*/
|
|
static void iio_buffer_release(struct kref *ref)
|
|
{
|
|
struct iio_buffer *buffer = container_of(ref, struct iio_buffer, ref);
|
|
|
|
buffer->access->release(buffer);
|
|
}
|
|
|
|
/**
|
|
* iio_buffer_get() - Grab a reference to the buffer
|
|
* @buffer: The buffer to grab a reference for, may be NULL
|
|
*
|
|
* Returns the pointer to the buffer that was passed into the function.
|
|
*/
|
|
struct iio_buffer *iio_buffer_get(struct iio_buffer *buffer)
|
|
{
|
|
if (buffer)
|
|
kref_get(&buffer->ref);
|
|
|
|
return buffer;
|
|
}
|
|
EXPORT_SYMBOL_GPL(iio_buffer_get);
|
|
|
|
/**
|
|
* iio_buffer_put() - Release the reference to the buffer
|
|
* @buffer: The buffer to release the reference for, may be NULL
|
|
*/
|
|
void iio_buffer_put(struct iio_buffer *buffer)
|
|
{
|
|
if (buffer)
|
|
kref_put(&buffer->ref, iio_buffer_release);
|
|
}
|
|
EXPORT_SYMBOL_GPL(iio_buffer_put);
|