Changes in 4.9.291 binder: use euid from cred instead of using task binder: use cred instead of task for selinux checks xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay Input: elantench - fix misreporting trackpoint coordinates Input: i8042 - Add quirk for Fujitsu Lifebook T725 libata: fix read log timeout value ocfs2: fix data corruption on truncate mmc: dw_mmc: Dont wait for DRTO on Write RSP error parisc: Fix ptrace check on syscall return media: ite-cir: IR receiver stop working after receive overflow ALSA: ua101: fix division by zero at probe ALSA: 6fire: fix control and bulk message timeouts ALSA: line6: fix control and interrupt message timeouts ALSA: synth: missing check for possible NULL after the call to kstrdup ALSA: timer: Fix use-after-free problem ALSA: timer: Unconditionally unlink slave instances, too x86/irq: Ensure PI wakeup handler is unregistered before module unload sfc: Don't use netif_info before net_device setup hyperv/vmbus: include linux/bitops.h mmc: winbond: don't build on M68K bpf: Prevent increasing bpf_jit_limit above max xen/netfront: stop tx queues during live migration spi: spl022: fix Microwire full duplex mode watchdog: Fix OMAP watchdog early handling vmxnet3: do not stop tx queues after netif_device_detach() btrfs: fix lost error handling when replaying directory deletes hwmon: (pmbus/lm25066) Add offset coefficients regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell mwifiex: fix division by zero in fw download path ath6kl: fix division by zero in send path ath6kl: fix control-message timeout PCI: Mark Atheros QCA6174 to avoid bus reset rtl8187: fix control-message timeouts evm: mark evm_fixmode as __ro_after_init wcn36xx: Fix HT40 capability for 2Ghz band mwifiex: Read a PCI register after writing the TX ring write pointer wcn36xx: handle connection loss indication RDMA/qedr: Fix NULL deref for query_qp on the GSI QP signal: Remove the bogus sigkill_pending in ptrace_stop signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT power: supply: max17042_battery: Prevent int underflow in set_soc_threshold power: supply: max17042_battery: use VFSOC for capacity when no rsns powerpc/85xx: Fix oops when mpc85xx_smp_guts_ids node cannot be found serial: core: Fix initializing and restoring termios speed ALSA: mixer: oss: Fix racy access to slots ALSA: mixer: fix deadlock in snd_mixer_oss_set_volume PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REG quota: check block number when reading the block in quota file quota: correct error number in free_dqentry() iio: dac: ad5446: Fix ad5622_write() return value USB: serial: keyspan: fix memleak on probe errors USB: iowarrior: fix control-message timeouts Bluetooth: sco: Fix lock_sock() blockage by memcpy_from_msg() Bluetooth: fix use-after-free error in lock_sock_nested() platform/x86: wmi: do not fail if disabling fails MIPS: lantiq: dma: add small delay after reset MIPS: lantiq: dma: reset correct number of channel locking/lockdep: Avoid RCU-induced noinstr fail smackfs: Fix use-after-free in netlbl_catmap_walk() x86: Increase exception stack sizes media: mt9p031: Fix corrupted frame after restarting stream media: netup_unidvb: handle interrupt properly according to the firmware media: uvcvideo: Set capability in s_param media: s5p-mfc: fix possible null-pointer dereference in s5p_mfc_probe() media: mceusb: return without resubmitting URB in case of -EPROTO error. ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK ACPICA: Avoid evaluating methods too early during system resume media: usb: dvd-usb: fix uninit-value bug in dibusb_read_eeprom_byte() tracefs: Have tracefs directories not set OTH permission bits by default ath: dfs_pattern_detector: Fix possible null-pointer dereference in channel_detector_create() ACPI: battery: Accept charges over the design capacity as full memstick: r592: Fix a UAF bug when removing the driver lib/xz: Avoid overlapping memcpy() with invalid input with in-place decompression lib/xz: Validate the value before assigning it to an enum variable tracing/cfi: Fix cmp_entries_* functions signature mismatch mwl8k: Fix use-after-free in mwl8k_fw_state_machine() PM: hibernate: Get block device exclusively in swsusp_check() iwlwifi: mvm: disable RX-diversity in powersave smackfs: use __GFP_NOFAIL for smk_cipso_doi() ARM: clang: Do not rely on lr register for stacktrace ARM: 9136/1: ARMv7-M uses BE-8, not BE-32 spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe() parisc: fix warning in flush_tlb_all parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling cgroup: Make rebind_subsystems() disable v2 controllers all at once media: dvb-usb: fix ununit-value in az6027_rc_query media: mtk-vpu: Fix a resource leak in the error handling path of 'mtk_vpu_probe()' media: si470x: Avoid card name truncation cpuidle: Fix kobject memory leaks in error paths ath9k: Fix potential interrupt storm on queue reset crypto: qat - detect PFVF collision after ACK crypto: qat - disregard spurious PFVF interrupts b43legacy: fix a lower bounds test b43: fix a lower bounds test memstick: avoid out-of-range warning memstick: jmb38x_ms: use appropriate free function in jmb38x_ms_alloc_host() hwmon: Fix possible memleak in __hwmon_device_register() ath10k: fix max antenna gain unit drm/msm: uninitialized variable in msm_gem_import() net: stream: don't purge sk_error_queue in sk_stream_kill_queues() mmc: mxs-mmc: disable regulator on error and in the remove function platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning mwifiex: Send DELBA requests according to spec phy: micrel: ksz8041nl: do not use power down mode smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap() irq: mips: avoid nested irq_enter() samples/kretprobes: Fix return value if register_kretprobe() failed libertas_tf: Fix possible memory leak in probe and disconnect libertas: Fix possible memory leak in probe and disconnect crypto: pcrypt - Delay write to padata->info RDMA/rxe: Fix wrong port_cap_flags ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc() scsi: dc395: Fix error case unwinding MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT JFS: fix memleak in jfs_mount arm: dts: omap3-gta04a4: accelerometer irq fix soc/tegra: Fix an error handling path in tegra_powergate_power_up() memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe video: fbdev: chipsfb: use memset_io() instead of memset() serial: 8250_dw: Drop wrong use of ACPI_PTR() usb: gadget: hid: fix error code in do_config() power: supply: rt5033_battery: Change voltage values to µV scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn() RDMA/mlx4: Return missed an error if device doesn't support steering serial: xilinx_uartps: Fix race condition causing stuck TX power: supply: bq27xxx: Fix kernel crash on IRQ handler register error pnfs/flexfiles: Fix misplaced barrier in nfs4_ff_layout_prepare_ds drm/plane-helper: fix uninitialized variable reference PCI: aardvark: Don't spam about PIO Response Status fs: orangefs: fix error return code of orangefs_revalidate_lookup() mtd: spi-nor: hisi-sfc: Remove excessive clk_disable_unprepare() dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macro auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string netfilter: nfnetlink_queue: fix OOB when mac header was cleared dmaengine: dmaengine_desc_callback_valid(): Check for `callback_result` m68k: set a default value for MEMORY_RESERVE watchdog: f71808e_wdt: fix inaccurate report in WDIOC_GETTIMEOUT scsi: qla2xxx: Turn off target reset during issue_lip i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()' xen-pciback: Fix return in pm_ctrl_init() net: davinci_emac: Fix interrupt pacing disable ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failed mm/zsmalloc.c: close race window between zs_pool_dec_isolated() and zs_unregister_migration() llc: fix out-of-bound array index in llc_sk_dev_hash() nfc: pn533: Fix double free when pn533_fill_fragment_skbs() fails vsock: prevent unnecessary refcnt inc for nonblocking connect USB: chipidea: fix interrupt deadlock ARM: 9156/1: drop cc-option fallbacks for architecture selection powerpc/bpf: Validate branch ranges powerpc/bpf: Fix BPF_SUB when imm == 0x80000000 mm, oom: pagefault_out_of_memory: don't force global OOM for dying tasks mm, oom: do not trigger out_of_memory from the #PF PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros net: mdio-mux: fix unbalanced put_device parisc/entry: fix trace test in syscall exit path PCI/MSI: Destroy sysfs before freeing entries scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq() usb: musb: tusb6010: check return value after calling platform_get_resource() scsi: advansys: Fix kernel pointer leak ARM: dts: omap: fix gpmc,mux-add-data type usb: host: ohci-tmio: check return value after calling platform_get_resource() tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc MIPS: sni: Fix the build scsi: target: Fix ordered tag handling scsi: target: Fix alua_tg_pt_gps_count tracking powerpc/5200: dts: fix memory node unit name ALSA: gus: fix null pointer dereference on pointer block powerpc/dcr: Use cmplwi instead of 3-argument cmpli sh: check return code of request_irq maple: fix wrong return value of maple_bus_init(). sh: fix kconfig unmet dependency warning for FRAME_POINTER sh: define __BIG_ENDIAN for math-emu mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain() net: bnx2x: fix variable dereferenced before check iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset mips: bcm63xx: add support for clk_get_parent() platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()' NFC: reorganize the functions in nci_request NFC: reorder the logic in nfc_{un,}register_device perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server tun: fix bonding active backup with arp monitoring hexagon: export raw I/O routines for modules mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag btrfs: fix memory ordering between normal and ordered work functions parisc/sticon: fix reverse colors cfg80211: call cfg80211_stop_ap when switch from P2P_GO type drm/udl: fix control-message timeout drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors batman-adv: Keep fragments equally sized batman-adv: Fix own OGM check in aggregated OGMs batman-adv: mcast: fix duplicate mcast packets in BLA backbone from LAN batman-adv: mcast: fix duplicate mcast packets from BLA backbone to mesh batman-adv: Consider fragmentation for needed_headroom batman-adv: Reserve needed_*room for fragments batman-adv: Don't always reallocate the fragmentation skb head ASoC: DAPM: Cover regression by kctl change notification fix usb: max-3421: Use driver data instead of maintaining a list of bound devices soc/tegra: pmc: Fix imbalanced clock disabling in error code path Linux 4.9.291 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I23d798c10aebab1e51add60ccb34a8b289d49a4d
555 lines
13 KiB
C
555 lines
13 KiB
C
/*
|
|
* Hardware monitoring driver for LM25056 / LM25063 / LM25066 / LM5064 / LM5066
|
|
*
|
|
* Copyright (c) 2011 Ericsson AB.
|
|
* Copyright (c) 2013 Guenter Roeck
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include "pmbus.h"
|
|
|
|
enum chips { lm25056, lm25063, lm25066, lm5064, lm5066 };
|
|
|
|
#define LM25066_READ_VAUX 0xd0
|
|
#define LM25066_MFR_READ_IIN 0xd1
|
|
#define LM25066_MFR_READ_PIN 0xd2
|
|
#define LM25066_MFR_IIN_OC_WARN_LIMIT 0xd3
|
|
#define LM25066_MFR_PIN_OP_WARN_LIMIT 0xd4
|
|
#define LM25066_READ_PIN_PEAK 0xd5
|
|
#define LM25066_CLEAR_PIN_PEAK 0xd6
|
|
#define LM25066_DEVICE_SETUP 0xd9
|
|
#define LM25066_READ_AVG_VIN 0xdc
|
|
#define LM25066_READ_AVG_VOUT 0xdd
|
|
#define LM25066_READ_AVG_IIN 0xde
|
|
#define LM25066_READ_AVG_PIN 0xdf
|
|
|
|
#define LM25066_DEV_SETUP_CL BIT(4) /* Current limit */
|
|
|
|
/* LM25056 only */
|
|
|
|
#define LM25056_VAUX_OV_WARN_LIMIT 0xe3
|
|
#define LM25056_VAUX_UV_WARN_LIMIT 0xe4
|
|
|
|
#define LM25056_MFR_STS_VAUX_OV_WARN BIT(1)
|
|
#define LM25056_MFR_STS_VAUX_UV_WARN BIT(0)
|
|
|
|
/* LM25063 only */
|
|
|
|
#define LM25063_READ_VOUT_MAX 0xe5
|
|
#define LM25063_READ_VOUT_MIN 0xe6
|
|
|
|
struct __coeff {
|
|
short m, b, R;
|
|
};
|
|
|
|
#define PSC_CURRENT_IN_L (PSC_NUM_CLASSES)
|
|
#define PSC_POWER_L (PSC_NUM_CLASSES + 1)
|
|
|
|
static struct __coeff lm25066_coeff[5][PSC_NUM_CLASSES + 2] = {
|
|
[lm25056] = {
|
|
[PSC_VOLTAGE_IN] = {
|
|
.m = 16296,
|
|
.b = 1343,
|
|
.R = -2,
|
|
},
|
|
[PSC_CURRENT_IN] = {
|
|
.m = 13797,
|
|
.b = -1833,
|
|
.R = -2,
|
|
},
|
|
[PSC_CURRENT_IN_L] = {
|
|
.m = 6726,
|
|
.b = -537,
|
|
.R = -2,
|
|
},
|
|
[PSC_POWER] = {
|
|
.m = 5501,
|
|
.b = -2908,
|
|
.R = -3,
|
|
},
|
|
[PSC_POWER_L] = {
|
|
.m = 26882,
|
|
.b = -5646,
|
|
.R = -4,
|
|
},
|
|
[PSC_TEMPERATURE] = {
|
|
.m = 1580,
|
|
.b = -14500,
|
|
.R = -2,
|
|
},
|
|
},
|
|
[lm25066] = {
|
|
[PSC_VOLTAGE_IN] = {
|
|
.m = 22070,
|
|
.b = -1800,
|
|
.R = -2,
|
|
},
|
|
[PSC_VOLTAGE_OUT] = {
|
|
.m = 22070,
|
|
.b = -1800,
|
|
.R = -2,
|
|
},
|
|
[PSC_CURRENT_IN] = {
|
|
.m = 13661,
|
|
.b = -5200,
|
|
.R = -2,
|
|
},
|
|
[PSC_CURRENT_IN_L] = {
|
|
.m = 6852,
|
|
.b = -3100,
|
|
.R = -2,
|
|
},
|
|
[PSC_POWER] = {
|
|
.m = 736,
|
|
.b = -3300,
|
|
.R = -2,
|
|
},
|
|
[PSC_POWER_L] = {
|
|
.m = 369,
|
|
.b = -1900,
|
|
.R = -2,
|
|
},
|
|
[PSC_TEMPERATURE] = {
|
|
.m = 16,
|
|
},
|
|
},
|
|
[lm25063] = {
|
|
[PSC_VOLTAGE_IN] = {
|
|
.m = 16000,
|
|
.R = -2,
|
|
},
|
|
[PSC_VOLTAGE_OUT] = {
|
|
.m = 16000,
|
|
.R = -2,
|
|
},
|
|
[PSC_CURRENT_IN] = {
|
|
.m = 10000,
|
|
.R = -2,
|
|
},
|
|
[PSC_CURRENT_IN_L] = {
|
|
.m = 10000,
|
|
.R = -2,
|
|
},
|
|
[PSC_POWER] = {
|
|
.m = 5000,
|
|
.R = -3,
|
|
},
|
|
[PSC_POWER_L] = {
|
|
.m = 5000,
|
|
.R = -3,
|
|
},
|
|
[PSC_TEMPERATURE] = {
|
|
.m = 15596,
|
|
.R = -3,
|
|
},
|
|
},
|
|
[lm5064] = {
|
|
[PSC_VOLTAGE_IN] = {
|
|
.m = 4611,
|
|
.b = -642,
|
|
.R = -2,
|
|
},
|
|
[PSC_VOLTAGE_OUT] = {
|
|
.m = 4621,
|
|
.b = 423,
|
|
.R = -2,
|
|
},
|
|
[PSC_CURRENT_IN] = {
|
|
.m = 10742,
|
|
.b = 1552,
|
|
.R = -2,
|
|
},
|
|
[PSC_CURRENT_IN_L] = {
|
|
.m = 5456,
|
|
.b = 2118,
|
|
.R = -2,
|
|
},
|
|
[PSC_POWER] = {
|
|
.m = 1204,
|
|
.b = 8524,
|
|
.R = -3,
|
|
},
|
|
[PSC_POWER_L] = {
|
|
.m = 612,
|
|
.b = 11202,
|
|
.R = -3,
|
|
},
|
|
[PSC_TEMPERATURE] = {
|
|
.m = 16,
|
|
},
|
|
},
|
|
[lm5066] = {
|
|
[PSC_VOLTAGE_IN] = {
|
|
.m = 4587,
|
|
.b = -1200,
|
|
.R = -2,
|
|
},
|
|
[PSC_VOLTAGE_OUT] = {
|
|
.m = 4587,
|
|
.b = -2400,
|
|
.R = -2,
|
|
},
|
|
[PSC_CURRENT_IN] = {
|
|
.m = 10753,
|
|
.b = -1200,
|
|
.R = -2,
|
|
},
|
|
[PSC_CURRENT_IN_L] = {
|
|
.m = 5405,
|
|
.b = -600,
|
|
.R = -2,
|
|
},
|
|
[PSC_POWER] = {
|
|
.m = 1204,
|
|
.b = -6000,
|
|
.R = -3,
|
|
},
|
|
[PSC_POWER_L] = {
|
|
.m = 605,
|
|
.b = -8000,
|
|
.R = -3,
|
|
},
|
|
[PSC_TEMPERATURE] = {
|
|
.m = 16,
|
|
},
|
|
},
|
|
};
|
|
|
|
struct lm25066_data {
|
|
int id;
|
|
u16 rlimit; /* Maximum register value */
|
|
struct pmbus_driver_info info;
|
|
};
|
|
|
|
#define to_lm25066_data(x) container_of(x, struct lm25066_data, info)
|
|
|
|
static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
|
const struct lm25066_data *data = to_lm25066_data(info);
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_READ_VMON:
|
|
ret = pmbus_read_word_data(client, 0, LM25066_READ_VAUX);
|
|
if (ret < 0)
|
|
break;
|
|
/* Adjust returned value to match VIN coefficients */
|
|
switch (data->id) {
|
|
case lm25056:
|
|
/* VIN: 6.14 mV VAUX: 293 uV LSB */
|
|
ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
|
|
break;
|
|
case lm25063:
|
|
/* VIN: 6.25 mV VAUX: 200.0 uV LSB */
|
|
ret = DIV_ROUND_CLOSEST(ret * 20, 625);
|
|
break;
|
|
case lm25066:
|
|
/* VIN: 4.54 mV VAUX: 283.2 uV LSB */
|
|
ret = DIV_ROUND_CLOSEST(ret * 2832, 45400);
|
|
break;
|
|
case lm5064:
|
|
/* VIN: 4.53 mV VAUX: 700 uV LSB */
|
|
ret = DIV_ROUND_CLOSEST(ret * 70, 453);
|
|
break;
|
|
case lm5066:
|
|
/* VIN: 2.18 mV VAUX: 725 uV LSB */
|
|
ret = DIV_ROUND_CLOSEST(ret * 725, 2180);
|
|
break;
|
|
}
|
|
break;
|
|
case PMBUS_READ_IIN:
|
|
ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_IIN);
|
|
break;
|
|
case PMBUS_READ_PIN:
|
|
ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_PIN);
|
|
break;
|
|
case PMBUS_IIN_OC_WARN_LIMIT:
|
|
ret = pmbus_read_word_data(client, 0,
|
|
LM25066_MFR_IIN_OC_WARN_LIMIT);
|
|
break;
|
|
case PMBUS_PIN_OP_WARN_LIMIT:
|
|
ret = pmbus_read_word_data(client, 0,
|
|
LM25066_MFR_PIN_OP_WARN_LIMIT);
|
|
break;
|
|
case PMBUS_VIRT_READ_VIN_AVG:
|
|
ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VIN);
|
|
break;
|
|
case PMBUS_VIRT_READ_VOUT_AVG:
|
|
ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VOUT);
|
|
break;
|
|
case PMBUS_VIRT_READ_IIN_AVG:
|
|
ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_IIN);
|
|
break;
|
|
case PMBUS_VIRT_READ_PIN_AVG:
|
|
ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_PIN);
|
|
break;
|
|
case PMBUS_VIRT_READ_PIN_MAX:
|
|
ret = pmbus_read_word_data(client, 0, LM25066_READ_PIN_PEAK);
|
|
break;
|
|
case PMBUS_VIRT_RESET_PIN_HISTORY:
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
ret = -ENODATA;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int lm25063_read_word_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_READ_VOUT_MAX:
|
|
ret = pmbus_read_word_data(client, 0, LM25063_READ_VOUT_MAX);
|
|
break;
|
|
case PMBUS_VIRT_READ_VOUT_MIN:
|
|
ret = pmbus_read_word_data(client, 0, LM25063_READ_VOUT_MIN);
|
|
break;
|
|
default:
|
|
ret = lm25066_read_word_data(client, page, reg);
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int lm25056_read_word_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
|
|
ret = pmbus_read_word_data(client, 0,
|
|
LM25056_VAUX_UV_WARN_LIMIT);
|
|
if (ret < 0)
|
|
break;
|
|
/* Adjust returned value to match VIN coefficients */
|
|
ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
|
|
break;
|
|
case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
|
|
ret = pmbus_read_word_data(client, 0,
|
|
LM25056_VAUX_OV_WARN_LIMIT);
|
|
if (ret < 0)
|
|
break;
|
|
/* Adjust returned value to match VIN coefficients */
|
|
ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
|
|
break;
|
|
default:
|
|
ret = lm25066_read_word_data(client, page, reg);
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int lm25056_read_byte_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
int ret, s;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VIRT_STATUS_VMON:
|
|
ret = pmbus_read_byte_data(client, 0,
|
|
PMBUS_STATUS_MFR_SPECIFIC);
|
|
if (ret < 0)
|
|
break;
|
|
s = 0;
|
|
if (ret & LM25056_MFR_STS_VAUX_UV_WARN)
|
|
s |= PB_VOLTAGE_UV_WARNING;
|
|
if (ret & LM25056_MFR_STS_VAUX_OV_WARN)
|
|
s |= PB_VOLTAGE_OV_WARNING;
|
|
ret = s;
|
|
break;
|
|
default:
|
|
ret = -ENODATA;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
|
|
u16 word)
|
|
{
|
|
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
|
const struct lm25066_data *data = to_lm25066_data(info);
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case PMBUS_POUT_OP_FAULT_LIMIT:
|
|
case PMBUS_POUT_OP_WARN_LIMIT:
|
|
case PMBUS_VOUT_UV_WARN_LIMIT:
|
|
case PMBUS_OT_FAULT_LIMIT:
|
|
case PMBUS_OT_WARN_LIMIT:
|
|
case PMBUS_IIN_OC_FAULT_LIMIT:
|
|
case PMBUS_VIN_UV_WARN_LIMIT:
|
|
case PMBUS_VIN_UV_FAULT_LIMIT:
|
|
case PMBUS_VIN_OV_FAULT_LIMIT:
|
|
case PMBUS_VIN_OV_WARN_LIMIT:
|
|
word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
|
|
ret = pmbus_write_word_data(client, 0, reg, word);
|
|
pmbus_clear_cache(client);
|
|
break;
|
|
case PMBUS_IIN_OC_WARN_LIMIT:
|
|
word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
|
|
ret = pmbus_write_word_data(client, 0,
|
|
LM25066_MFR_IIN_OC_WARN_LIMIT,
|
|
word);
|
|
pmbus_clear_cache(client);
|
|
break;
|
|
case PMBUS_PIN_OP_WARN_LIMIT:
|
|
word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
|
|
ret = pmbus_write_word_data(client, 0,
|
|
LM25066_MFR_PIN_OP_WARN_LIMIT,
|
|
word);
|
|
pmbus_clear_cache(client);
|
|
break;
|
|
case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
|
|
/* Adjust from VIN coefficients (for LM25056) */
|
|
word = DIV_ROUND_CLOSEST((int)word * 6140, 293);
|
|
word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
|
|
ret = pmbus_write_word_data(client, 0,
|
|
LM25056_VAUX_UV_WARN_LIMIT, word);
|
|
pmbus_clear_cache(client);
|
|
break;
|
|
case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
|
|
/* Adjust from VIN coefficients (for LM25056) */
|
|
word = DIV_ROUND_CLOSEST((int)word * 6140, 293);
|
|
word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
|
|
ret = pmbus_write_word_data(client, 0,
|
|
LM25056_VAUX_OV_WARN_LIMIT, word);
|
|
pmbus_clear_cache(client);
|
|
break;
|
|
case PMBUS_VIRT_RESET_PIN_HISTORY:
|
|
ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK);
|
|
break;
|
|
default:
|
|
ret = -ENODATA;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int lm25066_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int config;
|
|
struct lm25066_data *data;
|
|
struct pmbus_driver_info *info;
|
|
struct __coeff *coeff;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_READ_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(struct lm25066_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
config = i2c_smbus_read_byte_data(client, LM25066_DEVICE_SETUP);
|
|
if (config < 0)
|
|
return config;
|
|
|
|
data->id = id->driver_data;
|
|
info = &data->info;
|
|
|
|
info->pages = 1;
|
|
info->format[PSC_VOLTAGE_IN] = direct;
|
|
info->format[PSC_VOLTAGE_OUT] = direct;
|
|
info->format[PSC_CURRENT_IN] = direct;
|
|
info->format[PSC_TEMPERATURE] = direct;
|
|
info->format[PSC_POWER] = direct;
|
|
|
|
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON
|
|
| PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT
|
|
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
|
|
|
|
if (data->id == lm25056) {
|
|
info->func[0] |= PMBUS_HAVE_STATUS_VMON;
|
|
info->read_word_data = lm25056_read_word_data;
|
|
info->read_byte_data = lm25056_read_byte_data;
|
|
data->rlimit = 0x0fff;
|
|
} else if (data->id == lm25063) {
|
|
info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
|
| PMBUS_HAVE_POUT;
|
|
info->read_word_data = lm25063_read_word_data;
|
|
data->rlimit = 0xffff;
|
|
} else {
|
|
info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
|
|
info->read_word_data = lm25066_read_word_data;
|
|
data->rlimit = 0x0fff;
|
|
}
|
|
info->write_word_data = lm25066_write_word_data;
|
|
|
|
coeff = &lm25066_coeff[data->id][0];
|
|
info->m[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].m;
|
|
info->b[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].b;
|
|
info->R[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].R;
|
|
info->m[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].m;
|
|
info->b[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].b;
|
|
info->R[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].R;
|
|
info->m[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].m;
|
|
info->b[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].b;
|
|
info->R[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].R;
|
|
info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].b;
|
|
info->R[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].R;
|
|
info->b[PSC_POWER] = coeff[PSC_POWER].b;
|
|
info->R[PSC_POWER] = coeff[PSC_POWER].R;
|
|
if (config & LM25066_DEV_SETUP_CL) {
|
|
info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].m;
|
|
info->m[PSC_POWER] = coeff[PSC_POWER_L].m;
|
|
} else {
|
|
info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].m;
|
|
info->m[PSC_POWER] = coeff[PSC_POWER].m;
|
|
}
|
|
|
|
return pmbus_do_probe(client, id, info);
|
|
}
|
|
|
|
static const struct i2c_device_id lm25066_id[] = {
|
|
{"lm25056", lm25056},
|
|
{"lm25063", lm25063},
|
|
{"lm25066", lm25066},
|
|
{"lm5064", lm5064},
|
|
{"lm5066", lm5066},
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, lm25066_id);
|
|
|
|
/* This is the driver that will be inserted */
|
|
static struct i2c_driver lm25066_driver = {
|
|
.driver = {
|
|
.name = "lm25066",
|
|
},
|
|
.probe = lm25066_probe,
|
|
.remove = pmbus_do_remove,
|
|
.id_table = lm25066_id,
|
|
};
|
|
|
|
module_i2c_driver(lm25066_driver);
|
|
|
|
MODULE_AUTHOR("Guenter Roeck");
|
|
MODULE_DESCRIPTION("PMBus driver for LM25066 and compatible chips");
|
|
MODULE_LICENSE("GPL");
|