483e66c0e0
Changes in 4.9.249 spi: bcm2835aux: Fix use-after-free on unbind spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe iwlwifi: pcie: limit memory read spin time arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. ARC: stack unwinding: don't assume non-current task is sleeping platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE Input: cm109 - do not stomp on control URB Input: i8042 - add Acer laptops to the i8042 reset list pinctrl: amd: remove debounce filter setting in IRQ type setting scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" spi: Prevent adding devices below an unregistering controller net/mlx4_en: Avoid scheduling restart task if it is already running tcp: fix cwnd-limited bug for TSO deferral where we send nothing net: stmmac: delete the eee_ctrl_timer after napi disabled net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux net: bridge: vlan: fix error return code in __vlan_add() mac80211: mesh: fix mesh_pathtbl_init() error path USB: dummy-hcd: Fix uninitialized array use in init() USB: add RESET_RESUME quirk for Snapscan 1212 ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: usb-audio: Fix control 'access overflow' errors from chmap xhci: Give USB2 ports time to enter U3 in bus suspend USB: sisusbvga: Make console support depend on BROKEN ALSA: pcm: oss: Fix potential out-of-bounds shift serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access pinctrl: merrifield: Set default bias in case no particular value given pinctrl: baytrail: Avoid clearing debounce value when turning it off scsi: bnx2i: Requires MMU can: softing: softing_netdev_open(): fix error handling RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling drm/tegra: sor: Disable clocks on error in tegra_sor_init() scsi: mpt3sas: Increase IOCInit request timeout to 30s dm table: Remove BUG_ON(in_interrupt()) soc/tegra: fuse: Fix index bug in get_process_id USB: serial: option: add interface-number sanity check to flag handling USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XU ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410 ARM: dts: exynos: fix USB 3.0 pins supply being turned off on Odroid XU HID: i2c-hid: add Vero K147 to descriptor override serial_core: Check for port state when tty is in error state media: msi2500: assign SPI bus number dynamically md: fix a warning caused by a race between concurrent md_ioctl()s Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() drm/gma500: fix double free of gma_connector RDMA/rxe: Compute PSN windows correctly ARM: p2v: fix handling of LPAE translation in BE mode crypto: talitos - Fix return type of current_desc_hdr() spi: img-spfi: fix reference leak in img_spfi_resume ASoC: pcm: DRAIN support reactivation arm64: dts: exynos: Correct psci compatible used on Exynos7 Bluetooth: Fix null pointer dereference in hci_event_packet() spi: spi-ti-qspi: fix reference leak in ti_qspi_setup spi: tegra20-slink: fix reference leak in slink ops of tegra20 spi: tegra20-sflash: fix reference leak in tegra_sflash_resume spi: tegra114: fix reference leak in tegra spi ops RDMa/mthca: Work around -Wenum-conversion warning MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA staging: greybus: codecs: Fix reference counter leak in error handling media: solo6x10: fix missing snd_card_free in error handling case drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() Input: ads7846 - fix integer overflow on Rt calculation Input: ads7846 - fix unaligned access on 7845 powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 crypto: omap-aes - Fix PM disable depth imbalance in omap_aes_probe soc: ti: knav_qmss: fix reference leak in knav_queue_probe soc: ti: Fix reference imbalance in knav_dma_probe drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe RDMA/cxgb4: Validate the number of CQEs memstick: fix a double-free bug in memstick_check ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host orinoco: Move context allocation after processing the skb cw1200: fix missing destroy_workqueue() on error in cw1200_init_common media: siano: fix memory leak of debugfs members in smsdvb_hotplug mips: cdmm: fix use-after-free in mips_cdmm_bus_discover HSI: omap_ssi: Don't jump to free ID in ssi_add_controller() ARM: dts: at91: at91sam9rl: fix ADC triggers NFSv4.2: condition READDIR's mask for security label based on LSM state SUNRPC: xprt_load_transport() needs to support the netid "rdma6" lockd: don't use interval-based rebinding over TCP NFS: switch nfsiod to be an UNBOUND workqueue. vfio-pci: Use io_remap_pfn_range() for PCI IO memory media: saa7146: fix array overflow in vidioc_s_audio() clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent() pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe() memstick: r592: Fix error return in r592_probe() ASoC: jz4740-i2s: add missed checks for clk_get() dm ioctl: fix error return code in target_message clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI cpufreq: highbank: Add missing MODULE_DEVICE_TABLE cpufreq: st: Add missing MODULE_DEVICE_TABLE cpufreq: loongson1: Add missing MODULE_ALIAS cpufreq: scpi: Add missing MODULE_ALIAS scsi: pm80xx: Fix error return in pm8001_pci_probe() seq_buf: Avoid type mismatch for seq_buf_init scsi: fnic: Fix error return code in fnic_probe() powerpc/pseries/hibernation: drop pseries_suspend_begin() from suspend ops usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probe usb: oxu210hp-hcd: Fix memory leak in oxu_create speakup: fix uninitialized flush_lock nfsd: Fix message level for normal termination nfs_common: need lock during iterate through the list x86/kprobes: Restore BTF if the single-stepping is cancelled clk: tegra: Fix duplicated SE clock entry extcon: max77693: Fix modalias string ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control() irqchip/alpine-msi: Fix freeing of interrupts on allocation error path um: chan_xterm: Fix fd leak nfc: s3fwrn5: Release the nfc firmware powerpc/ps3: use dma_mapping_error() checkpatch: fix unescaped left brace net: bcmgenet: Fix a resource leak in an error handling path in the probe functin net: allwinner: Fix some resources leak in the error handling path of the probe and in the remove function net: korina: fix return value watchdog: qcom: Avoid context switch in restart handler clk: ti: Fix memleak in ti_fapll_synth_setup perf record: Fix memory leak when using '--user-regs=?' to list registers qlcnic: Fix error code in probe clk: s2mps11: Fix a resource leak in error handling paths in the probe function cfg80211: initialize rekey_data Input: cros_ec_keyb - send 'scancodes' in addition to key events Input: goodix - add upside-down quirk for Teclast X98 Pro tablet media: gspca: Fix memory leak in probe media: sunxi-cir: ensure IR is handled when it is continuous media: netup_unidvb: Don't leak SPI master in probe error path Input: cyapa_gen6 - fix out-of-bounds stack access Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks" ACPI: PNP: compare the string length in the matching_id() ALSA: pcm: oss: Fix a few more UBSAN fixes ALSA: usb-audio: Disable sample read check if firmware doesn't give back s390/dasd: prevent inconsistent LCU device data s390/dasd: fix list corruption of pavgroup group list s390/dasd: fix list corruption of lcu list staging: comedi: mf6x4: Fix AI end-of-conversion detection powerpc/perf: Exclude kernel samples while counting events in user space. USB: serial: mos7720: fix parallel-port state restore USB: serial: keyspan_pda: fix dropped unthrottle interrupts USB: serial: keyspan_pda: fix write deadlock USB: serial: keyspan_pda: fix stalled writes USB: serial: keyspan_pda: fix write-wakeup use-after-free USB: serial: keyspan_pda: fix tx-unthrottle use-after-free USB: serial: keyspan_pda: fix write unthrottling btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block() Btrfs: fix selftests failure due to uninitialized i_mode in test inodes btrfs: fix return value mixup in btrfs_get_extent ext4: fix a memory leak of ext4_free_data KVM: arm64: Introduce handling of AArch32 TTBCR2 traps powerpc/xmon: Change printk() to pr_cont() ceph: fix race in concurrent __ceph_remove_cap invocations jffs2: Fix GC exit abnormally jfs: Fix array index bounds check in dbAdjTree drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor() spi: spi-sh: Fix use-after-free on unbind spi: davinci: Fix use-after-free on unbind spi: pic32: Don't leak DMA channels in probe error path spi: rb4xx: Don't leak SPI master in probe error path spi: sc18is602: Don't leak SPI master in probe error path spi: st-ssc4: Fix unbalanced pm_runtime_disable() in probe error path soc: qcom: smp2p: Safely acquire spinlock without IRQs mtd: parser: cmdline: Fix parsing of part-names with colons iio: buffer: Fix demux update iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume iio:pressure:mpl3115: Force alignment of buffer clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 xen-blkback: set ring->xenblkd to NULL after kthread_stop() PCI: Fix pci_slot_release() NULL pointer dereference Linux 4.9.249 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I4829a32e2ea6e76eefea716f35f42ee02b75c265
445 lines
23 KiB
C
445 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
/*
|
|
* Quirks for I2C-HID devices that do not supply proper descriptors
|
|
*
|
|
* Copyright (c) 2018 Julian Sax <jsbc@gmx.de>
|
|
*
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/mod_devicetable.h>
|
|
|
|
#include "i2c-hid.h"
|
|
|
|
|
|
struct i2c_hid_desc_override {
|
|
union {
|
|
struct i2c_hid_desc *i2c_hid_desc;
|
|
uint8_t *i2c_hid_desc_buffer;
|
|
};
|
|
uint8_t *hid_report_desc;
|
|
unsigned int hid_report_desc_size;
|
|
uint8_t *i2c_name;
|
|
};
|
|
|
|
|
|
/*
|
|
* descriptors for the SIPODEV SP1064 touchpad
|
|
*
|
|
* This device does not supply any descriptors and on windows a filter
|
|
* driver operates between the i2c-hid layer and the device and injects
|
|
* these descriptors when the device is prompted. The descriptors were
|
|
* extracted by listening to the i2c-hid traffic that occurs between the
|
|
* windows filter driver and the windows i2c-hid driver.
|
|
*/
|
|
|
|
static const struct i2c_hid_desc_override sipodev_desc = {
|
|
.i2c_hid_desc_buffer = (uint8_t [])
|
|
{0x1e, 0x00, /* Length of descriptor */
|
|
0x00, 0x01, /* Version of descriptor */
|
|
0xdb, 0x01, /* Length of report descriptor */
|
|
0x21, 0x00, /* Location of report descriptor */
|
|
0x24, 0x00, /* Location of input report */
|
|
0x1b, 0x00, /* Max input report length */
|
|
0x25, 0x00, /* Location of output report */
|
|
0x11, 0x00, /* Max output report length */
|
|
0x22, 0x00, /* Location of command register */
|
|
0x23, 0x00, /* Location of data register */
|
|
0x11, 0x09, /* Vendor ID */
|
|
0x88, 0x52, /* Product ID */
|
|
0x06, 0x00, /* Version ID */
|
|
0x00, 0x00, 0x00, 0x00 /* Reserved */
|
|
},
|
|
|
|
.hid_report_desc = (uint8_t [])
|
|
{0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x09, 0x02, /* Usage (Mouse), */
|
|
0xA1, 0x01, /* Collection (Application), */
|
|
0x85, 0x01, /* Report ID (1), */
|
|
0x09, 0x01, /* Usage (Pointer), */
|
|
0xA1, 0x00, /* Collection (Physical), */
|
|
0x05, 0x09, /* Usage Page (Button), */
|
|
0x19, 0x01, /* Usage Minimum (01h), */
|
|
0x29, 0x02, /* Usage Maximum (02h), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x95, 0x06, /* Report Count (6), */
|
|
0x81, 0x01, /* Input (Constant), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x09, 0x30, /* Usage (X), */
|
|
0x09, 0x31, /* Usage (Y), */
|
|
0x15, 0x81, /* Logical Minimum (-127), */
|
|
0x25, 0x7F, /* Logical Maximum (127), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x81, 0x06, /* Input (Variable, Relative), */
|
|
0xC0, /* End Collection, */
|
|
0xC0, /* End Collection, */
|
|
0x05, 0x0D, /* Usage Page (Digitizer), */
|
|
0x09, 0x05, /* Usage (Touchpad), */
|
|
0xA1, 0x01, /* Collection (Application), */
|
|
0x85, 0x04, /* Report ID (4), */
|
|
0x05, 0x0D, /* Usage Page (Digitizer), */
|
|
0x09, 0x22, /* Usage (Finger), */
|
|
0xA1, 0x02, /* Collection (Logical), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0x09, 0x47, /* Usage (Touch Valid), */
|
|
0x09, 0x42, /* Usage (Tip Switch), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x75, 0x03, /* Report Size (3), */
|
|
0x25, 0x05, /* Logical Maximum (5), */
|
|
0x09, 0x51, /* Usage (Contact Identifier), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0x81, 0x03, /* Input (Constant, Variable), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x26, 0x44, 0x0A, /* Logical Maximum (2628), */
|
|
0x75, 0x10, /* Report Size (16), */
|
|
0x55, 0x0E, /* Unit Exponent (14), */
|
|
0x65, 0x11, /* Unit (Centimeter), */
|
|
0x09, 0x30, /* Usage (X), */
|
|
0x46, 0x1A, 0x04, /* Physical Maximum (1050), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x46, 0xBC, 0x02, /* Physical Maximum (700), */
|
|
0x26, 0x34, 0x05, /* Logical Maximum (1332), */
|
|
0x09, 0x31, /* Usage (Y), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0x05, 0x0D, /* Usage Page (Digitizer), */
|
|
0x09, 0x22, /* Usage (Finger), */
|
|
0xA1, 0x02, /* Collection (Logical), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0x09, 0x47, /* Usage (Touch Valid), */
|
|
0x09, 0x42, /* Usage (Tip Switch), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x75, 0x03, /* Report Size (3), */
|
|
0x25, 0x05, /* Logical Maximum (5), */
|
|
0x09, 0x51, /* Usage (Contact Identifier), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0x81, 0x03, /* Input (Constant, Variable), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x26, 0x44, 0x0A, /* Logical Maximum (2628), */
|
|
0x75, 0x10, /* Report Size (16), */
|
|
0x09, 0x30, /* Usage (X), */
|
|
0x46, 0x1A, 0x04, /* Physical Maximum (1050), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x46, 0xBC, 0x02, /* Physical Maximum (700), */
|
|
0x26, 0x34, 0x05, /* Logical Maximum (1332), */
|
|
0x09, 0x31, /* Usage (Y), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0x05, 0x0D, /* Usage Page (Digitizer), */
|
|
0x09, 0x22, /* Usage (Finger), */
|
|
0xA1, 0x02, /* Collection (Logical), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0x09, 0x47, /* Usage (Touch Valid), */
|
|
0x09, 0x42, /* Usage (Tip Switch), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x75, 0x03, /* Report Size (3), */
|
|
0x25, 0x05, /* Logical Maximum (5), */
|
|
0x09, 0x51, /* Usage (Contact Identifier), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0x81, 0x03, /* Input (Constant, Variable), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x26, 0x44, 0x0A, /* Logical Maximum (2628), */
|
|
0x75, 0x10, /* Report Size (16), */
|
|
0x09, 0x30, /* Usage (X), */
|
|
0x46, 0x1A, 0x04, /* Physical Maximum (1050), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x46, 0xBC, 0x02, /* Physical Maximum (700), */
|
|
0x26, 0x34, 0x05, /* Logical Maximum (1332), */
|
|
0x09, 0x31, /* Usage (Y), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0x05, 0x0D, /* Usage Page (Digitizer), */
|
|
0x09, 0x22, /* Usage (Finger), */
|
|
0xA1, 0x02, /* Collection (Logical), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0x09, 0x47, /* Usage (Touch Valid), */
|
|
0x09, 0x42, /* Usage (Tip Switch), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x75, 0x03, /* Report Size (3), */
|
|
0x25, 0x05, /* Logical Maximum (5), */
|
|
0x09, 0x51, /* Usage (Contact Identifier), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0x81, 0x03, /* Input (Constant, Variable), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x26, 0x44, 0x0A, /* Logical Maximum (2628), */
|
|
0x75, 0x10, /* Report Size (16), */
|
|
0x09, 0x30, /* Usage (X), */
|
|
0x46, 0x1A, 0x04, /* Physical Maximum (1050), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x46, 0xBC, 0x02, /* Physical Maximum (700), */
|
|
0x26, 0x34, 0x05, /* Logical Maximum (1332), */
|
|
0x09, 0x31, /* Usage (Y), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0x05, 0x0D, /* Usage Page (Digitizer), */
|
|
0x55, 0x0C, /* Unit Exponent (12), */
|
|
0x66, 0x01, 0x10, /* Unit (Seconds), */
|
|
0x47, 0xFF, 0xFF, 0x00, 0x00,/* Physical Maximum (65535), */
|
|
0x27, 0xFF, 0xFF, 0x00, 0x00,/* Logical Maximum (65535), */
|
|
0x75, 0x10, /* Report Size (16), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x09, 0x56, /* Usage (Scan Time), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x54, /* Usage (Contact Count), */
|
|
0x25, 0x7F, /* Logical Maximum (127), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x05, 0x09, /* Usage Page (Button), */
|
|
0x09, 0x01, /* Usage (01h), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x95, 0x07, /* Report Count (7), */
|
|
0x81, 0x03, /* Input (Constant, Variable), */
|
|
0x05, 0x0D, /* Usage Page (Digitizer), */
|
|
0x85, 0x02, /* Report ID (2), */
|
|
0x09, 0x55, /* Usage (Contact Count Maximum), */
|
|
0x09, 0x59, /* Usage (59h), */
|
|
0x75, 0x04, /* Report Size (4), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x25, 0x0F, /* Logical Maximum (15), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x05, 0x0D, /* Usage Page (Digitizer), */
|
|
0x85, 0x07, /* Report ID (7), */
|
|
0x09, 0x60, /* Usage (60h), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x95, 0x07, /* Report Count (7), */
|
|
0xB1, 0x03, /* Feature (Constant, Variable), */
|
|
0x85, 0x06, /* Report ID (6), */
|
|
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
|
|
0x09, 0xC5, /* Usage (C5h), */
|
|
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x96, 0x00, 0x01, /* Report Count (256), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
|
|
0x09, 0x01, /* Usage (01h), */
|
|
0xA1, 0x01, /* Collection (Application), */
|
|
0x85, 0x0D, /* Report ID (13), */
|
|
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
|
|
0x19, 0x01, /* Usage Minimum (01h), */
|
|
0x29, 0x02, /* Usage Maximum (02h), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0x05, 0x0D, /* Usage Page (Digitizer), */
|
|
0x09, 0x0E, /* Usage (Configuration), */
|
|
0xA1, 0x01, /* Collection (Application), */
|
|
0x85, 0x03, /* Report ID (3), */
|
|
0x09, 0x22, /* Usage (Finger), */
|
|
0xA1, 0x02, /* Collection (Logical), */
|
|
0x09, 0x52, /* Usage (Device Mode), */
|
|
0x25, 0x0A, /* Logical Maximum (10), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0x09, 0x22, /* Usage (Finger), */
|
|
0xA1, 0x00, /* Collection (Physical), */
|
|
0x85, 0x05, /* Report ID (5), */
|
|
0x09, 0x57, /* Usage (57h), */
|
|
0x09, 0x58, /* Usage (58h), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x95, 0x06, /* Report Count (6), */
|
|
0xB1, 0x03, /* Feature (Constant, Variable),*/
|
|
0xC0, /* End Collection, */
|
|
0xC0 /* End Collection */
|
|
},
|
|
.hid_report_desc_size = 475,
|
|
.i2c_name = "SYNA3602:00"
|
|
};
|
|
|
|
|
|
static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
|
|
{
|
|
.ident = "Teclast F6 Pro",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TECLAST"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "F6 Pro"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Teclast F7",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TECLAST"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "F7"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Trekstor Primebook C13",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Primebook C13"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Trekstor Primebook C11",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Primebook C11"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
/*
|
|
* There are at least 2 Primebook C11B versions, the older
|
|
* version has a product-name of "Primebook C11B", and a
|
|
* bios version / release / firmware revision of:
|
|
* V2.1.2 / 05/03/2018 / 18.2
|
|
* The new version has "PRIMEBOOK C11B" as product-name and a
|
|
* bios version / release / firmware revision of:
|
|
* CFALKSW05_BIOS_V1.1.2 / 11/19/2018 / 19.2
|
|
* Only the older version needs this quirk, note the newer
|
|
* version will not match as it has a different product-name.
|
|
*/
|
|
.ident = "Trekstor Primebook C11B",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Primebook C11B"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Trekstor SURFBOOK E11B",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "SURFBOOK E11B"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Direkt-Tek DTLAPY116-2",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "DTLAPY116-2"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Direkt-Tek DTLAPY133-1",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "DTLAPY133-1"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Mediacom Flexbook Edge 11",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MEDIACOM"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "FlexBook edge11 - M-FBE11"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Mediacom FlexBook edge 13",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MEDIACOM"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "FlexBook_edge13-M-FBE13"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Odys Winbook 13",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AXDIA International GmbH"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "WINBOOK 13"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Schneider SCL142ALM",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SCHNEIDER"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "SCL142ALM"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{
|
|
.ident = "Vero K147",
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VERO"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "K147"),
|
|
},
|
|
.driver_data = (void *)&sipodev_desc
|
|
},
|
|
{ } /* Terminate list */
|
|
};
|
|
|
|
|
|
struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name)
|
|
{
|
|
struct i2c_hid_desc_override *override;
|
|
const struct dmi_system_id *system_id;
|
|
|
|
system_id = dmi_first_match(i2c_hid_dmi_desc_override_table);
|
|
if (!system_id)
|
|
return NULL;
|
|
|
|
override = system_id->driver_data;
|
|
if (strcmp(override->i2c_name, i2c_name))
|
|
return NULL;
|
|
|
|
return override->i2c_hid_desc;
|
|
}
|
|
|
|
char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
|
|
unsigned int *size)
|
|
{
|
|
struct i2c_hid_desc_override *override;
|
|
const struct dmi_system_id *system_id;
|
|
|
|
system_id = dmi_first_match(i2c_hid_dmi_desc_override_table);
|
|
if (!system_id)
|
|
return NULL;
|
|
|
|
override = system_id->driver_data;
|
|
if (strcmp(override->i2c_name, i2c_name))
|
|
return NULL;
|
|
|
|
*size = override->hid_report_desc_size;
|
|
return override->hid_report_desc;
|
|
}
|