1
0
Files
kernel-49/drivers/gpu/drm/drm_mipi_dsi.c
Greg Kroah-Hartman 6c5ed2a7d7 Merge 4.9.331 into android-4.9-q
Changes in 4.9.331
	uas: add no-uas quirk for Hiksemi usb_disk
	usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
	uas: ignore UAS for Thinkplus chips
	net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455
	ntfs: fix BUG_ON in ntfs_lookup_inode_by_name()
	mmc: moxart: fix 4-bit bus width and remove 8-bit bus width
	mm: prevent page_frag_alloc() from corrupting the memory
	Revert "drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time"
	Input: melfas_mip4 - fix return value check in mip4_probe()
	usbnet: Fix memory leak in usbnet_disconnect()
	nvme: add new line after variable declatation
	nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
	selftests: Fix the if conditions of in test_extra_filter()
	clk: iproc: Minor tidy up of iproc pll data structures
	clk: iproc: Do not rely on node name for correct PLL setup
	Makefile.extrawarn: Move -Wcast-function-type-strict to W=1
	ARM: fix function graph tracer and unwinder dependencies
	fs: fix UAF/GPF bug in nilfs_mdt_destroy
	dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property
	dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure
	ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
	net/ieee802154: fix uninit value bug in dgram_sendmsg
	um: Cleanup syscall_handler_t cast in syscalls_32.h
	um: Cleanup compiler warning in arch/x86/um/tls_32.c
	usb: mon: make mmapped memory read only
	USB: serial: ftdi_sio: fix 300 bps rate for SIO
	nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()
	nilfs2: fix leak of nilfs_root in case of writer thread creation failure
	nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
	ceph: don't truncate file in atomic_open
	random: clamp credited irq bits to maximum mixed
	ALSA: hda: Fix position reporting on Poulsbo
	scsi: stex: Properly zero out the passthrough command structure
	USB: serial: qcserial: add new usb-id for Dell branded EM7455
	random: avoid reading two cache lines on irq randomness
	wifi: mac80211_hwsim: avoid mac80211 warning on bad rate
	random: restore O_NONBLOCK support
	Input: xpad - add supported devices as contributed on github
	Input: xpad - fix wireless 360 controller breaking after suspend
	random: use expired timer rather than wq for mixing fast pool
	ALSA: oss: Fix potential deadlock at unregistration
	ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
	ALSA: usb-audio: Fix potential memory leaks
	ALSA: usb-audio: Fix NULL dererence at error path
	iio: dac: ad5593r: Fix i2c read protocol requirements
	fs: dlm: fix race between test_bit() and queue_work()
	fs: dlm: handle -EBUSY first in lock arg validation
	quota: Check next/prev free block number after reading from quota file
	regulator: qcom_rpm: Fix circular deferral regression
	parisc: fbdev/stifb: Align graphics memory size to 4MB
	UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
	PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge
	fbdev: smscufx: Fix use-after-free in ufx_ops_open()
	nilfs2: fix use-after-free bug of struct nilfs_root
	ext4: avoid crash when inline data creation follows DIO write
	ext4: fix null-ptr-deref in ext4_write_info
	ext4: make ext4_lazyinit_thread freezable
	ext4: place buffer head allocation before handle start
	ring-buffer: Allow splice to read previous partially read pages
	ring-buffer: Check pending waiters when doing wake ups as well
	ring-buffer: Fix race between reset page and reading page
	KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility
	selinux: use "grep -E" instead of "egrep"
	sh: machvec: Use char[] for section boundaries
	wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
	wifi: mac80211: allow bw change during channel switch in mesh
	wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse()
	spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume()
	spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime()
	wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration
	net: fs_enet: Fix wrong check in do_pd_setup
	spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe
	mISDN: fix use-after-free bugs in l1oip timer handlers
	tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited
	net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks()
	bnx2x: fix potential memory leak in bnx2x_tpa_stop()
	drm/mipi-dsi: Detach devices when removing the host
	platform/x86: msi-laptop: Fix old-ec check for backlight registering
	mmc: au1xmmc: Fix an error handling path in au1xmmc_probe()
	ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API
	ALSA: dmaengine: increment buffer pointer atomically
	memory: of: Fix refcount leak bug in of_get_ddr_timings()
	soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
	soc: qcom: smem_state: Add refcounting for the 'state->of_node'
	ARM: dts: kirkwood: lsxl: fix serial line
	ARM: dts: kirkwood: lsxl: remove first ethernet port
	ARM: Drop CMDLINE_* dependency on ATAGS
	ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
	iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
	iio: inkern: only release the device node when done with it
	iio: ABI: Fix wrong format of differential capacitance channel ABI.
	clk: tegra: Fix refcount leak in tegra210_clock_init
	clk: tegra: Fix refcount leak in tegra114_clock_init
	clk: tegra20: Fix refcount leak in tegra20_clock_init
	HSI: omap_ssi: Fix refcount leak in ssi_probe
	HSI: omap_ssi_port: Fix dma_map_sg error check
	media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop
	tty: xilinx_uartps: Fix the ignore_status
	media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
	RDMA/rxe: Fix "kernel NULL pointer dereference" error
	RDMA/rxe: Fix the error caused by qp->sk
	dyndbg: fix module.dyndbg handling
	dyndbg: let query-modname override actual module name
	ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
	ata: fix ata_id_has_devslp()
	ata: fix ata_id_has_ncq_autosense()
	ata: fix ata_id_has_dipm()
	drivers: serial: jsm: fix some leaks in probe
	firmware: google: Test spinlock on panic path to avoid lockups
	serial: 8250: Fix restoring termios speed after suspend
	mfd: intel_soc_pmic: Fix an error handling path in intel_soc_pmic_i2c_probe()
	mfd: lp8788: Fix an error handling path in lp8788_probe()
	mfd: lp8788: Fix an error handling path in lp8788_irq_init() and lp8788_irq_init()
	mfd: sm501: Add check for platform_driver_register()
	dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()
	clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration
	clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
	powerpc/math_emu/efp: Include module.h
	powerpc/pci_dn: Add missing of_node_put()
	powerpc: Fix SPE Power ISA properties for e500v1 platforms
	iommu/omap: Fix buffer overflow in debugfs
	f2fs: fix race condition on setting FI_NO_EXTENT flag
	ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
	MIPS: BCM47XX: Cast memcmp() of function to (void *)
	powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
	thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
	openvswitch: Fix double reporting of drops in dropwatch
	openvswitch: Fix overreporting of drops in dropwatch
	tcp: annotate data-race around tcp_md5sig_pool_populated
	xfrm: Update ipcomp_scratches with NULL when freed
	Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
	Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
	can: bcm: check the result of can_send() in bcm_can_tx()
	wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620
	Bluetooth: L2CAP: Fix user-after-free
	r8152: Rate limit overflow messages
	drm: Use size_t type for len variable in drm_copy_field()
	drm: Prevent drm_copy_field() to attempt copying a NULL pointer
	platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
	drm/amdgpu: fix initial connector audio value
	ARM: dts: imx7d-sdb: config the max pressure for tsc2046
	ARM: dts: imx6q: add missing properties for sram
	ARM: dts: imx6dl: add missing properties for sram
	ARM: dts: imx6qp: add missing properties for sram
	ARM: dts: imx6sl: add missing properties for sram
	media: cx88: Fix a null-ptr-deref bug in buffer_prepare()
	scsi: 3w-9xxx: Avoid disabling device if failing to enable it
	HID: roccat: Fix use-after-free in roccat_read()
	usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
	usb: musb: Fix musb_gadget.c rxstate overflow bug
	Revert "usb: storage: Add quirk for Samsung Fit flash"
	usb: idmouse: fix an uninit-value in idmouse_open
	perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
	net: ieee802154: return -EINVAL for unknown addr type
	net/ieee802154: don't warn zero-sized raw_sendmsg()
	ext4: continue to expand file system when the target size doesn't reach
	inet: fully convert sk->sk_rx_dst to RCU rules
	thermal: intel_powerclamp: Use first online CPU as control_cpu
	gcov: support GCC 12.1 and newer compilers
	Linux 4.9.331

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I105d6215a29d200abe3330f328ce3c2009ba0df9
2022-10-26 16:33:33 +03:00

1163 lines
28 KiB
C

/*
* MIPI DSI Bus
*
* Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
* Andrzej Hajda <a.hajda@samsung.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#include <drm/drm_mipi_dsi.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <video/mipi_display.h>
/**
* DOC: dsi helpers
*
* These functions contain some common logic and helpers to deal with MIPI DSI
* peripherals.
*
* Helpers are provided for a number of standard MIPI DSI command as well as a
* subset of the MIPI DCS command set.
*/
static int mipi_dsi_device_match(struct device *dev, struct device_driver *drv)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
/* attempt OF style match */
if (of_driver_match_device(dev, drv))
return 1;
/* compare DSI device and driver names */
if (!strcmp(dsi->name, drv->name))
return 1;
return 0;
}
static int mipi_dsi_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
int err;
err = of_device_uevent_modalias(dev, env);
if (err != -ENODEV)
return err;
add_uevent_var(env, "MODALIAS=%s%s", MIPI_DSI_MODULE_PREFIX,
dsi->name);
return 0;
}
static const struct dev_pm_ops mipi_dsi_device_pm_ops = {
.runtime_suspend = pm_generic_runtime_suspend,
.runtime_resume = pm_generic_runtime_resume,
.suspend = pm_generic_suspend,
.resume = pm_generic_resume,
.freeze = pm_generic_freeze,
.thaw = pm_generic_thaw,
.poweroff = pm_generic_poweroff,
.restore = pm_generic_restore,
};
static struct bus_type mipi_dsi_bus_type = {
.name = "mipi-dsi",
.match = mipi_dsi_device_match,
.uevent = mipi_dsi_uevent,
.pm = &mipi_dsi_device_pm_ops,
};
static int of_device_match(struct device *dev, void *data)
{
return dev->of_node == data;
}
/**
* of_find_mipi_dsi_device_by_node() - find the MIPI DSI device matching a
* device tree node
* @np: device tree node
*
* Return: A pointer to the MIPI DSI device corresponding to @np or NULL if no
* such device exists (or has not been registered yet).
*/
struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np)
{
struct device *dev;
dev = bus_find_device(&mipi_dsi_bus_type, NULL, np, of_device_match);
return dev ? to_mipi_dsi_device(dev) : NULL;
}
EXPORT_SYMBOL(of_find_mipi_dsi_device_by_node);
static void mipi_dsi_dev_release(struct device *dev)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
of_node_put(dev->of_node);
kfree(dsi);
}
static const struct device_type mipi_dsi_device_type = {
.release = mipi_dsi_dev_release,
};
static struct mipi_dsi_device *mipi_dsi_device_alloc(struct mipi_dsi_host *host)
{
struct mipi_dsi_device *dsi;
dsi = kzalloc(sizeof(*dsi), GFP_KERNEL);
if (!dsi)
return ERR_PTR(-ENOMEM);
dsi->host = host;
dsi->dev.bus = &mipi_dsi_bus_type;
dsi->dev.parent = host->dev;
dsi->dev.type = &mipi_dsi_device_type;
device_initialize(&dsi->dev);
return dsi;
}
static int mipi_dsi_device_add(struct mipi_dsi_device *dsi)
{
struct mipi_dsi_host *host = dsi->host;
dev_set_name(&dsi->dev, "%s.%d", dev_name(host->dev), dsi->channel);
return device_add(&dsi->dev);
}
#if IS_ENABLED(CONFIG_OF)
static struct mipi_dsi_device *
of_mipi_dsi_device_add(struct mipi_dsi_host *host, struct device_node *node)
{
struct device *dev = host->dev;
struct mipi_dsi_device_info info = { };
int ret;
u32 reg;
if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
dev_err(dev, "modalias failure on %s\n", node->full_name);
return ERR_PTR(-EINVAL);
}
ret = of_property_read_u32(node, "reg", &reg);
if (ret) {
dev_err(dev, "device node %s has no valid reg property: %d\n",
node->full_name, ret);
return ERR_PTR(-EINVAL);
}
info.channel = reg;
info.node = of_node_get(node);
return mipi_dsi_device_register_full(host, &info);
}
#else
static struct mipi_dsi_device *
of_mipi_dsi_device_add(struct mipi_dsi_host *host, struct device_node *node)
{
return ERR_PTR(-ENODEV);
}
#endif
/**
* mipi_dsi_device_register_full - create a MIPI DSI device
* @host: DSI host to which this device is connected
* @info: pointer to template containing DSI device information
*
* Create a MIPI DSI device by using the device information provided by
* mipi_dsi_device_info template
*
* Returns:
* A pointer to the newly created MIPI DSI device, or, a pointer encoded
* with an error
*/
struct mipi_dsi_device *
mipi_dsi_device_register_full(struct mipi_dsi_host *host,
const struct mipi_dsi_device_info *info)
{
struct mipi_dsi_device *dsi;
struct device *dev = host->dev;
int ret;
if (!info) {
dev_err(dev, "invalid mipi_dsi_device_info pointer\n");
return ERR_PTR(-EINVAL);
}
if (info->channel > 3) {
dev_err(dev, "invalid virtual channel: %u\n", info->channel);
return ERR_PTR(-EINVAL);
}
dsi = mipi_dsi_device_alloc(host);
if (IS_ERR(dsi)) {
dev_err(dev, "failed to allocate DSI device %ld\n",
PTR_ERR(dsi));
return dsi;
}
dsi->dev.of_node = info->node;
dsi->channel = info->channel;
strlcpy(dsi->name, info->type, sizeof(dsi->name));
ret = mipi_dsi_device_add(dsi);
if (ret) {
dev_err(dev, "failed to add DSI device %d\n", ret);
kfree(dsi);
return ERR_PTR(ret);
}
return dsi;
}
EXPORT_SYMBOL(mipi_dsi_device_register_full);
/**
* mipi_dsi_device_unregister - unregister MIPI DSI device
* @dsi: DSI peripheral device
*/
void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi)
{
device_unregister(&dsi->dev);
}
EXPORT_SYMBOL(mipi_dsi_device_unregister);
static DEFINE_MUTEX(host_lock);
static LIST_HEAD(host_list);
/**
* of_find_mipi_dsi_host_by_node() - find the MIPI DSI host matching a
* device tree node
* @node: device tree node
*
* Returns:
* A pointer to the MIPI DSI host corresponding to @node or NULL if no
* such device exists (or has not been registered yet).
*/
struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node)
{
struct mipi_dsi_host *host;
mutex_lock(&host_lock);
list_for_each_entry(host, &host_list, list) {
if (host->dev->of_node == node) {
mutex_unlock(&host_lock);
return host;
}
}
mutex_unlock(&host_lock);
return NULL;
}
EXPORT_SYMBOL(of_find_mipi_dsi_host_by_node);
int mipi_dsi_host_register(struct mipi_dsi_host *host)
{
struct device_node *node;
for_each_available_child_of_node(host->dev->of_node, node) {
/* skip nodes without reg property */
if (!of_find_property(node, "reg", NULL))
continue;
of_mipi_dsi_device_add(host, node);
}
mutex_lock(&host_lock);
list_add_tail(&host->list, &host_list);
mutex_unlock(&host_lock);
return 0;
}
EXPORT_SYMBOL(mipi_dsi_host_register);
static int mipi_dsi_remove_device_fn(struct device *dev, void *priv)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
mipi_dsi_detach(dsi);
mipi_dsi_device_unregister(dsi);
return 0;
}
void mipi_dsi_host_unregister(struct mipi_dsi_host *host)
{
device_for_each_child(host->dev, NULL, mipi_dsi_remove_device_fn);
mutex_lock(&host_lock);
list_del_init(&host->list);
mutex_unlock(&host_lock);
}
EXPORT_SYMBOL(mipi_dsi_host_unregister);
/**
* mipi_dsi_attach - attach a DSI device to its DSI host
* @dsi: DSI peripheral
*/
int mipi_dsi_attach(struct mipi_dsi_device *dsi)
{
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
if (!ops || !ops->attach)
return -ENOSYS;
return ops->attach(dsi->host, dsi);
}
EXPORT_SYMBOL(mipi_dsi_attach);
/**
* mipi_dsi_detach - detach a DSI device from its DSI host
* @dsi: DSI peripheral
*/
int mipi_dsi_detach(struct mipi_dsi_device *dsi)
{
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
if (!ops || !ops->detach)
return -ENOSYS;
return ops->detach(dsi->host, dsi);
}
EXPORT_SYMBOL(mipi_dsi_detach);
static ssize_t mipi_dsi_device_transfer(struct mipi_dsi_device *dsi,
struct mipi_dsi_msg *msg)
{
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
if (!ops || !ops->transfer)
return -ENOSYS;
if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
msg->flags |= MIPI_DSI_MSG_USE_LPM;
return ops->transfer(dsi->host, msg);
}
/**
* mipi_dsi_packet_format_is_short - check if a packet is of the short format
* @type: MIPI DSI data type of the packet
*
* Return: true if the packet for the given data type is a short packet, false
* otherwise.
*/
bool mipi_dsi_packet_format_is_short(u8 type)
{
switch (type) {
case MIPI_DSI_V_SYNC_START:
case MIPI_DSI_V_SYNC_END:
case MIPI_DSI_H_SYNC_START:
case MIPI_DSI_H_SYNC_END:
case MIPI_DSI_END_OF_TRANSMISSION:
case MIPI_DSI_COLOR_MODE_OFF:
case MIPI_DSI_COLOR_MODE_ON:
case MIPI_DSI_SHUTDOWN_PERIPHERAL:
case MIPI_DSI_TURN_ON_PERIPHERAL:
case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
case MIPI_DSI_DCS_SHORT_WRITE:
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
case MIPI_DSI_DCS_READ:
case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
return true;
}
return false;
}
EXPORT_SYMBOL(mipi_dsi_packet_format_is_short);
/**
* mipi_dsi_packet_format_is_long - check if a packet is of the long format
* @type: MIPI DSI data type of the packet
*
* Return: true if the packet for the given data type is a long packet, false
* otherwise.
*/
bool mipi_dsi_packet_format_is_long(u8 type)
{
switch (type) {
case MIPI_DSI_NULL_PACKET:
case MIPI_DSI_BLANKING_PACKET:
case MIPI_DSI_GENERIC_LONG_WRITE:
case MIPI_DSI_DCS_LONG_WRITE:
case MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20:
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24:
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16:
case MIPI_DSI_PACKED_PIXEL_STREAM_30:
case MIPI_DSI_PACKED_PIXEL_STREAM_36:
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12:
case MIPI_DSI_PACKED_PIXEL_STREAM_16:
case MIPI_DSI_PACKED_PIXEL_STREAM_18:
case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
case MIPI_DSI_PACKED_PIXEL_STREAM_24:
return true;
}
return false;
}
EXPORT_SYMBOL(mipi_dsi_packet_format_is_long);
/**
* mipi_dsi_create_packet - create a packet from a message according to the
* DSI protocol
* @packet: pointer to a DSI packet structure
* @msg: message to translate into a packet
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
const struct mipi_dsi_msg *msg)
{
if (!packet || !msg)
return -EINVAL;
/* do some minimum sanity checking */
if (!mipi_dsi_packet_format_is_short(msg->type) &&
!mipi_dsi_packet_format_is_long(msg->type))
return -EINVAL;
if (msg->channel > 3)
return -EINVAL;
memset(packet, 0, sizeof(*packet));
packet->header[0] = ((msg->channel & 0x3) << 6) | (msg->type & 0x3f);
/* TODO: compute ECC if hardware support is not available */
/*
* Long write packets contain the word count in header bytes 1 and 2.
* The payload follows the header and is word count bytes long.
*
* Short write packets encode up to two parameters in header bytes 1
* and 2.
*/
if (mipi_dsi_packet_format_is_long(msg->type)) {
packet->header[1] = (msg->tx_len >> 0) & 0xff;
packet->header[2] = (msg->tx_len >> 8) & 0xff;
packet->payload_length = msg->tx_len;
packet->payload = msg->tx_buf;
} else {
const u8 *tx = msg->tx_buf;
packet->header[1] = (msg->tx_len > 0) ? tx[0] : 0;
packet->header[2] = (msg->tx_len > 1) ? tx[1] : 0;
}
packet->size = sizeof(packet->header) + packet->payload_length;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_create_packet);
/**
* mipi_dsi_shutdown_peripheral() - sends a Shutdown Peripheral command
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.type = MIPI_DSI_SHUTDOWN_PERIPHERAL,
.tx_buf = (u8 [2]) { 0, 0 },
.tx_len = 2,
};
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_shutdown_peripheral);
/**
* mipi_dsi_turn_on_peripheral() - sends a Turn On Peripheral command
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.type = MIPI_DSI_TURN_ON_PERIPHERAL,
.tx_buf = (u8 [2]) { 0, 0 },
.tx_len = 2,
};
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_turn_on_peripheral);
/*
* mipi_dsi_set_maximum_return_packet_size() - specify the maximum size of the
* the payload in a long packet transmitted from the peripheral back to the
* host processor
* @dsi: DSI peripheral device
* @value: the maximum size of the payload
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
u16 value)
{
u8 tx[2] = { value & 0xff, value >> 8 };
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
.tx_len = sizeof(tx),
.tx_buf = tx,
};
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size);
/**
* mipi_dsi_generic_write() - transmit data using a generic write packet
* @dsi: DSI peripheral device
* @payload: buffer containing the payload
* @size: size of payload buffer
*
* This function will automatically choose the right data type depending on
* the payload length.
*
* Return: The number of bytes transmitted on success or a negative error code
* on failure.
*/
ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
size_t size)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.tx_buf = payload,
.tx_len = size
};
switch (size) {
case 0:
msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM;
break;
case 1:
msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM;
break;
case 2:
msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM;
break;
default:
msg.type = MIPI_DSI_GENERIC_LONG_WRITE;
break;
}
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_generic_write);
/**
* mipi_dsi_generic_read() - receive data using a generic read packet
* @dsi: DSI peripheral device
* @params: buffer containing the request parameters
* @num_params: number of request parameters
* @data: buffer in which to return the received data
* @size: size of receive buffer
*
* This function will automatically choose the right data type depending on
* the number of parameters passed in.
*
* Return: The number of bytes successfully read or a negative error code on
* failure.
*/
ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
size_t num_params, void *data, size_t size)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.tx_len = num_params,
.tx_buf = params,
.rx_len = size,
.rx_buf = data
};
switch (num_params) {
case 0:
msg.type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM;
break;
case 1:
msg.type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM;
break;
case 2:
msg.type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM;
break;
default:
return -EINVAL;
}
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_generic_read);
/**
* mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload
* @dsi: DSI peripheral device
* @data: buffer containing data to be transmitted
* @len: size of transmission buffer
*
* This function will automatically choose the right data type depending on
* the command payload length.
*
* Return: The number of bytes successfully transmitted or a negative error
* code on failure.
*/
ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
const void *data, size_t len)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.tx_buf = data,
.tx_len = len
};
switch (len) {
case 0:
return -EINVAL;
case 1:
msg.type = MIPI_DSI_DCS_SHORT_WRITE;
break;
case 2:
msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM;
break;
default:
msg.type = MIPI_DSI_DCS_LONG_WRITE;
break;
}
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer);
/**
* mipi_dsi_dcs_write() - send DCS write command
* @dsi: DSI peripheral device
* @cmd: DCS command
* @data: buffer containing the command payload
* @len: command payload length
*
* This function will automatically choose the right data type depending on
* the command payload length.
*
* Return: The number of bytes successfully transmitted or a negative error
* code on failure.
*/
ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
const void *data, size_t len)
{
ssize_t err;
size_t size;
u8 *tx;
if (len > 0) {
size = 1 + len;
tx = kmalloc(size, GFP_KERNEL);
if (!tx)
return -ENOMEM;
/* concatenate the DCS command byte and the payload */
tx[0] = cmd;
memcpy(&tx[1], data, len);
} else {
tx = &cmd;
size = 1;
}
err = mipi_dsi_dcs_write_buffer(dsi, tx, size);
if (len > 0)
kfree(tx);
return err;
}
EXPORT_SYMBOL(mipi_dsi_dcs_write);
/**
* mipi_dsi_dcs_read() - send DCS read request command
* @dsi: DSI peripheral device
* @cmd: DCS command
* @data: buffer in which to receive data
* @len: size of receive buffer
*
* Return: The number of bytes read or a negative error code on failure.
*/
ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
size_t len)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.type = MIPI_DSI_DCS_READ,
.tx_buf = &cmd,
.tx_len = 1,
.rx_buf = data,
.rx_len = len
};
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_dcs_read);
/**
* mipi_dsi_dcs_nop() - send DCS nop packet
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_NOP, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_nop);
/**
* mipi_dsi_dcs_soft_reset() - perform a software reset of the display module
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SOFT_RESET, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_soft_reset);
/**
* mipi_dsi_dcs_get_power_mode() - query the display module's current power
* mode
* @dsi: DSI peripheral device
* @mode: return location for the current power mode
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode)
{
ssize_t err;
err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_POWER_MODE, mode,
sizeof(*mode));
if (err <= 0) {
if (err == 0)
err = -ENODATA;
return err;
}
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_get_power_mode);
/**
* mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image
* data used by the interface
* @dsi: DSI peripheral device
* @format: return location for the pixel format
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format)
{
ssize_t err;
err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_PIXEL_FORMAT, format,
sizeof(*format));
if (err <= 0) {
if (err == 0)
err = -ENODATA;
return err;
}
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_get_pixel_format);
/**
* mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the
* display module except interface communication
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_enter_sleep_mode);
/**
* mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display
* module
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_exit_sleep_mode);
/**
* mipi_dsi_dcs_set_display_off() - stop displaying the image data on the
* display device
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_display_off);
/**
* mipi_dsi_dcs_set_display_on() - start displaying the image data on the
* display device
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on);
/**
* mipi_dsi_dcs_set_column_address() - define the column extent of the frame
* memory accessed by the host processor
* @dsi: DSI peripheral device
* @start: first column of frame memory
* @end: last column of frame memory
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
u16 end)
{
u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload,
sizeof(payload));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address);
/**
* mipi_dsi_dcs_set_page_address() - define the page extent of the frame
* memory accessed by the host processor
* @dsi: DSI peripheral device
* @start: first page of frame memory
* @end: last page of frame memory
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
u16 end)
{
u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload,
sizeof(payload));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_page_address);
/**
* mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect
* output signal on the TE signal line
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_OFF, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_off);
/**
* mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect
* output signal on the TE signal line.
* @dsi: DSI peripheral device
* @mode: the Tearing Effect Output Line mode
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
enum mipi_dsi_dcs_tear_mode mode)
{
u8 value = mode;
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_ON, &value,
sizeof(value));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
/**
* mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
* data used by the interface
* @dsi: DSI peripheral device
* @format: pixel format
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format,
sizeof(format));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
/**
* mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for
* the Tearing Effect output signal of the display module
* @dsi: DSI peripheral device
* @scanline: scanline to use as trigger
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline)
{
u8 payload[2] = { scanline >> 8, scanline & 0xff };
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_SCANLINE, payload,
sizeof(payload));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline);
/**
* mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the
* display
* @dsi: DSI peripheral device
* @brightness: brightness value
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
u16 brightness)
{
u8 payload[2] = { brightness & 0xff, brightness >> 8 };
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
payload, sizeof(payload));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness);
/**
* mipi_dsi_dcs_get_display_brightness() - gets the current brightness value
* of the display
* @dsi: DSI peripheral device
* @brightness: brightness value
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
u16 *brightness)
{
ssize_t err;
err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
brightness, sizeof(*brightness));
if (err <= 0) {
if (err == 0)
err = -ENODATA;
return err;
}
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness);
static int mipi_dsi_drv_probe(struct device *dev)
{
struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
return drv->probe(dsi);
}
static int mipi_dsi_drv_remove(struct device *dev)
{
struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
return drv->remove(dsi);
}
static void mipi_dsi_drv_shutdown(struct device *dev)
{
struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
drv->shutdown(dsi);
}
/**
* mipi_dsi_driver_register_full() - register a driver for DSI devices
* @drv: DSI driver structure
* @owner: owner module
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_driver_register_full(struct mipi_dsi_driver *drv,
struct module *owner)
{
drv->driver.bus = &mipi_dsi_bus_type;
drv->driver.owner = owner;
if (drv->probe)
drv->driver.probe = mipi_dsi_drv_probe;
if (drv->remove)
drv->driver.remove = mipi_dsi_drv_remove;
if (drv->shutdown)
drv->driver.shutdown = mipi_dsi_drv_shutdown;
return driver_register(&drv->driver);
}
EXPORT_SYMBOL(mipi_dsi_driver_register_full);
/**
* mipi_dsi_driver_unregister() - unregister a driver for DSI devices
* @drv: DSI driver structure
*
* Return: 0 on success or a negative error code on failure.
*/
void mipi_dsi_driver_unregister(struct mipi_dsi_driver *drv)
{
driver_unregister(&drv->driver);
}
EXPORT_SYMBOL(mipi_dsi_driver_unregister);
static int __init mipi_dsi_bus_init(void)
{
return bus_register(&mipi_dsi_bus_type);
}
postcore_initcall(mipi_dsi_bus_init);
MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>");
MODULE_DESCRIPTION("MIPI DSI Bus");
MODULE_LICENSE("GPL and additional rights");