b4ee1c4b37
Changes in 4.9.156
drm/bufs: Fix Spectre v1 vulnerability
staging: iio: adc: ad7280a: handle error from __ad7280_read32()
ASoC: Intel: mrfld: fix uninitialized variable access
gpu: ipu-v3: image-convert: Prevent race between run and unprepare
ath9k: dynack: use authentication messages for 'late' ack
scsi: lpfc: Correct LCB RJT handling
ARM: 8808/1: kexec:offline panic_smp_self_stop CPU
dlm: Don't swamp the CPU with callbacks queued during recovery
x86/PCI: Fix Broadcom CNB20LE unintended sign extension (redux)
powerpc/pseries: add of_node_put() in dlpar_detach_node()
drm/vc4: ->x_scaling[1] should never be set to VC4_SCALING_NONE
serial: fsl_lpuart: clear parity enable bit when disable parity
ptp: check gettime64 return code in PTP_SYS_OFFSET ioctl
staging:iio:ad2s90: Make probe handle spi_setup failure
staging: iio: ad7780: update voltage on read
ARM: OMAP2+: hwmod: Fix some section annotations
modpost: validate symbol names also in find_elf_symbol
perf tools: Add Hygon Dhyana support
soc/tegra: Don't leak device tree node reference
media: mtk-vcodec: Release device nodes in mtk_vcodec_init_enc_pm()
dmaengine: xilinx_dma: Remove __aligned attribute on zynqmp_dma_desc_ll
iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID
media: adv*/tc358743/ths8200: fill in min width/height/pixelclock
f2fs: move dir data flush to write checkpoint process
f2fs: fix wrong return value of f2fs_acl_create
sunvdc: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN
soc: bcm: brcmstb: Don't leak device tree node reference
nfsd4: fix crash on writing v4_end_grace before nfsd startup
Thermal: do not clear passive state during system sleep
firmware/efi: Add NULL pointer checks in efivars API functions
arm64: ftrace: don't adjust the LR value
ARM: dts: mmp2: fix TWSI2
x86/fpu: Add might_fault() to user_insn()
media: DaVinci-VPBE: fix error handling in vpbe_initialize()
smack: fix access permissions for keyring
usb: hub: delay hub autosuspend if USB3 port is still link training
timekeeping: Use proper seqcount initializer
clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks
iommu/amd: Fix amd_iommu=force_isolation
ARM: dts: Fix OMAP4430 SDP Ethernet startup
mips: bpf: fix encoding bug for mm_srlv32_op
iommu/arm-smmu: Add support for qcom,smmu-v2 variant
iommu/arm-smmu-v3: Use explicit mb() when moving cons pointer
sata_rcar: fix deferred probing
clk: imx6sl: ensure MMDC CH0 handshake is bypassed
cpuidle: big.LITTLE: fix refcount leak
i2c-axxia: check for error conditions first
udf: Fix BUG on corrupted inode
ARM: pxa: avoid section mismatch warning
ASoC: fsl: Fix SND_SOC_EUKREA_TLV320 build error on i.MX8M
memstick: Prevent memstick host from getting runtime suspended during card detection
tty: serial: samsung: Properly set flags in autoCTS mode
perf header: Fix unchecked usage of strncpy()
perf probe: Fix unchecked usage of strncpy()
arm64: KVM: Skip MMIO insn after emulation
powerpc/uaccess: fix warning/error with access_ok()
mac80211: fix radiotap vendor presence bitmap handling
xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spi
Bluetooth: Fix unnecessary error message for HCI request completion
scsi: smartpqi: correct host serial num for ssa
scsi: smartpqi: correct volume status
cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()
drbd: narrow rcu_read_lock in drbd_sync_handshake
drbd: disconnect, if the wrong UUIDs are attached on a connected peer
drbd: skip spurious timeout (ping-timeo) when failing promote
drbd: Avoid Clang warning about pointless switch statment
video: clps711x-fb: release disp device node in probe()
fbdev: fbmem: behave better with small rotated displays and many CPUs
i40e: define proper net_device::neigh_priv_len
igb: Fix an issue that PME is not enabled during runtime suspend
fbdev: fbcon: Fix unregister crash when more than one framebuffer
pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
KVM: x86: svm: report MSR_IA32_MCG_EXT_CTL as unsupported
NFS: nfs_compare_mount_options always compare auth flavors.
hwmon: (lm80) fix a missing check of the status of SMBus read
hwmon: (lm80) fix a missing check of bus read in lm80 probe
seq_buf: Make seq_buf_puts() null-terminate the buffer
crypto: ux500 - Use proper enum in cryp_set_dma_transfer
crypto: ux500 - Use proper enum in hash_set_dma_transfer
MIPS: ralink: Select CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8
cifs: check ntwrk_buf_start for NULL before dereferencing it
um: Avoid marking pages with "changed protection"
niu: fix missing checks of niu_pci_eeprom_read
f2fs: fix sbi->extent_list corruption issue
scripts/decode_stacktrace: only strip base path when a prefix of the path
ocfs2: don't clear bh uptodate for block read
isdn: hisax: hfc_pci: Fix a possible concurrency use-after-free bug in HFCPCI_l1hw()
gdrom: fix a memory leak bug
fsl/fman: Use GFP_ATOMIC in {memac,tgec}_add_hash_mac_address()
block/swim3: Fix -EBUSY error when re-opening device after unmount
thermal: generic-adc: Fix adc to temp interpolation
HID: lenovo: Add checks to fix of_led_classdev_register
kernel/hung_task.c: break RCU locks based on jiffies
proc/sysctl: fix return error for proc_doulongvec_minmax()
fs/epoll: drop ovflist branch prediction
exec: load_script: don't blindly truncate shebang string
thermal: hwmon: inline helpers when CONFIG_THERMAL_HWMON is not set
dccp: fool proof ccid_hc_[rt]x_parse_options()
net: dp83640: expire old TX-skb
rxrpc: bad unlock balance in rxrpc_recvmsg
skge: potential memory corruption in skge_get_regs()
rds: fix refcount bug in rds_sock_addref
net: systemport: Fix WoL with password after deep sleep
net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames
net: dsa: slave: Don't propagate flag changes on down slave interfaces
enic: fix checksum validation for IPv6
ALSA: compress: Fix stop handling on compressed capture streams
ALSA: hda - Serialize codec registrations
fuse: call pipe_buf_release() under pipe lock
fuse: decrement NR_WRITEBACK_TEMP on the right page
fuse: handle zero sized retrieve correctly
dmaengine: bcm2835: Fix interrupt race on RT
dmaengine: bcm2835: Fix abort of transactions
dmaengine: imx-dma: fix wrong callback invoke
usb: phy: am335x: fix race condition in _probe
usb: gadget: udc: net2272: Fix bitwise and boolean operations
usb: gadget: musb: fix short isoc packets with inventra dma
scsi: aic94xx: fix module loading
KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
perf/x86/intel/uncore: Add Node ID mask
x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()
perf/core: Don't WARN() for impossible ring-buffer sizes
perf tests evsel-tp-sched: Fix bitwise operator
serial: fix race between flush_to_ldisc and tty_open
oom, oom_reaper: do not enqueue same task twice
PCI: vmd: Free up IRQs on suspend path
IB/hfi1: Add limit test for RC/UC send via loopback
perf/x86/intel: Delay memory deallocation until x86_pmu_dead_cpu()
ath9k: dynack: make ewma estimation faster
ath9k: dynack: check da->enabled first in sampling routines
Linux 4.9.156
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
460 lines
29 KiB
C
460 lines
29 KiB
C
/*
|
|
* Copyright 2013-2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <dt-bindings/clock/imx6sl-clock.h>
|
|
|
|
#include "clk.h"
|
|
|
|
#define CCDR 0x4
|
|
#define BM_CCM_CCDR_MMDC_CH0_MASK (1 << 17)
|
|
#define CCSR 0xc
|
|
#define BM_CCSR_PLL1_SW_CLK_SEL (1 << 2)
|
|
#define CACRR 0x10
|
|
#define CDHIPR 0x48
|
|
#define BM_CDHIPR_ARM_PODF_BUSY (1 << 16)
|
|
#define ARM_WAIT_DIV_396M 2
|
|
#define ARM_WAIT_DIV_792M 4
|
|
#define ARM_WAIT_DIV_996M 6
|
|
|
|
#define PLL_ARM 0x0
|
|
#define BM_PLL_ARM_DIV_SELECT (0x7f << 0)
|
|
#define BM_PLL_ARM_POWERDOWN (1 << 12)
|
|
#define BM_PLL_ARM_ENABLE (1 << 13)
|
|
#define BM_PLL_ARM_LOCK (1 << 31)
|
|
#define PLL_ARM_DIV_792M 66
|
|
|
|
static const char *step_sels[] = { "osc", "pll2_pfd2", };
|
|
static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
|
|
static const char *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", };
|
|
static const char *ocram_sels[] = { "periph", "ocram_alt_sels", };
|
|
static const char *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", };
|
|
static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", };
|
|
static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
|
|
static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", };
|
|
static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", };
|
|
static const char *csi_sels[] = { "osc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
|
|
static const char *lcdif_axi_sels[] = { "pll2_bus", "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", };
|
|
static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", };
|
|
static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
|
|
static const char *perclk_sels[] = { "ipg", "osc", };
|
|
static const char *pxp_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd3", };
|
|
static const char *epdc_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd2", };
|
|
static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
|
|
static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
|
|
static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
|
|
static const char *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", };
|
|
static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
|
|
static const char *ecspi_sels[] = { "pll3_60m", "osc", };
|
|
static const char *uart_sels[] = { "pll3_80m", "osc", };
|
|
static const char *lvds_sels[] = {
|
|
"pll1_sys", "pll2_bus", "pll2_pfd0", "pll2_pfd1", "pll2_pfd2", "dummy", "pll4_audio", "pll5_video",
|
|
"dummy", "enet_ref", "dummy", "dummy", "pll3_usb_otg", "pll7_usb_host", "pll3_pfd0", "pll3_pfd1",
|
|
"pll3_pfd2", "pll3_pfd3", "osc", "dummy", "dummy", "dummy", "dummy", "dummy",
|
|
"dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
|
|
};
|
|
static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", };
|
|
static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
|
|
static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
|
|
static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
|
|
static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
|
|
static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
|
|
static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
|
|
static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
|
|
|
|
static struct clk_div_table clk_enet_ref_table[] = {
|
|
{ .val = 0, .div = 20, },
|
|
{ .val = 1, .div = 10, },
|
|
{ .val = 2, .div = 5, },
|
|
{ .val = 3, .div = 4, },
|
|
{ }
|
|
};
|
|
|
|
static struct clk_div_table post_div_table[] = {
|
|
{ .val = 2, .div = 1, },
|
|
{ .val = 1, .div = 2, },
|
|
{ .val = 0, .div = 4, },
|
|
{ }
|
|
};
|
|
|
|
static struct clk_div_table video_div_table[] = {
|
|
{ .val = 0, .div = 1, },
|
|
{ .val = 1, .div = 2, },
|
|
{ .val = 2, .div = 1, },
|
|
{ .val = 3, .div = 4, },
|
|
{ }
|
|
};
|
|
|
|
static unsigned int share_count_ssi1;
|
|
static unsigned int share_count_ssi2;
|
|
static unsigned int share_count_ssi3;
|
|
static unsigned int share_count_spdif;
|
|
|
|
static struct clk *clks[IMX6SL_CLK_END];
|
|
static struct clk_onecell_data clk_data;
|
|
static void __iomem *ccm_base;
|
|
static void __iomem *anatop_base;
|
|
|
|
static const u32 clks_init_on[] __initconst = {
|
|
IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT,
|
|
};
|
|
|
|
/*
|
|
* ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
|
|
* during WAIT mode entry process could cause cache memory
|
|
* corruption.
|
|
*
|
|
* Software workaround:
|
|
* To prevent this issue from occurring, software should ensure that the
|
|
* ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before
|
|
* entering WAIT mode.
|
|
*
|
|
* This function will set the ARM clk to max value within the 12:5 limit.
|
|
* As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz),
|
|
* ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since
|
|
* the clk APIs can NOT be called in idle thread(may cause kernel schedule
|
|
* as there is sleep function in PLL wait function), so here we just slow
|
|
* down ARM to below freq according to previous freq:
|
|
*
|
|
* run mode wait mode
|
|
* 396MHz -> 132MHz;
|
|
* 792MHz -> 158.4MHz;
|
|
* 996MHz -> 142.3MHz;
|
|
*/
|
|
static int imx6sl_get_arm_divider_for_wait(void)
|
|
{
|
|
if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) {
|
|
return ARM_WAIT_DIV_396M;
|
|
} else {
|
|
if ((readl_relaxed(anatop_base + PLL_ARM) &
|
|
BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M)
|
|
return ARM_WAIT_DIV_792M;
|
|
else
|
|
return ARM_WAIT_DIV_996M;
|
|
}
|
|
}
|
|
|
|
static void imx6sl_enable_pll_arm(bool enable)
|
|
{
|
|
static u32 saved_pll_arm;
|
|
u32 val;
|
|
|
|
if (enable) {
|
|
saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM);
|
|
val |= BM_PLL_ARM_ENABLE;
|
|
val &= ~BM_PLL_ARM_POWERDOWN;
|
|
writel_relaxed(val, anatop_base + PLL_ARM);
|
|
while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
|
|
;
|
|
} else {
|
|
writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM);
|
|
}
|
|
}
|
|
|
|
void imx6sl_set_wait_clk(bool enter)
|
|
{
|
|
static unsigned long saved_arm_div;
|
|
int arm_div_for_wait = imx6sl_get_arm_divider_for_wait();
|
|
|
|
/*
|
|
* According to hardware design, arm podf change need
|
|
* PLL1 clock enabled.
|
|
*/
|
|
if (arm_div_for_wait == ARM_WAIT_DIV_396M)
|
|
imx6sl_enable_pll_arm(true);
|
|
|
|
if (enter) {
|
|
saved_arm_div = readl_relaxed(ccm_base + CACRR);
|
|
writel_relaxed(arm_div_for_wait, ccm_base + CACRR);
|
|
} else {
|
|
writel_relaxed(saved_arm_div, ccm_base + CACRR);
|
|
}
|
|
while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY)
|
|
;
|
|
|
|
if (arm_div_for_wait == ARM_WAIT_DIV_396M)
|
|
imx6sl_enable_pll_arm(false);
|
|
}
|
|
|
|
static struct clk ** const uart_clks[] __initconst = {
|
|
&clks[IMX6SL_CLK_UART],
|
|
&clks[IMX6SL_CLK_UART_SERIAL],
|
|
NULL
|
|
};
|
|
|
|
static void __init imx6sl_clocks_init(struct device_node *ccm_node)
|
|
{
|
|
struct device_node *np;
|
|
void __iomem *base;
|
|
int i;
|
|
int ret;
|
|
|
|
clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
|
|
clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
|
|
clks[IMX6SL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
|
|
/* Clock source from external clock via CLK1 PAD */
|
|
clks[IMX6SL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop");
|
|
base = of_iomap(np, 0);
|
|
WARN_ON(!base);
|
|
anatop_base = base;
|
|
|
|
clks[IMX6SL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
clks[IMX6SL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
clks[IMX6SL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
clks[IMX6SL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
clks[IMX6SL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
clks[IMX6SL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
clks[IMX6SL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
|
|
/* type name parent_name base div_mask */
|
|
clks[IMX6SL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "osc", base + 0x00, 0x7f);
|
|
clks[IMX6SL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "osc", base + 0x30, 0x1);
|
|
clks[IMX6SL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "osc", base + 0x10, 0x3);
|
|
clks[IMX6SL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "osc", base + 0x70, 0x7f);
|
|
clks[IMX6SL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "osc", base + 0xa0, 0x7f);
|
|
clks[IMX6SL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "osc", base + 0xe0, 0x3);
|
|
clks[IMX6SL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "osc", base + 0x20, 0x3);
|
|
|
|
clks[IMX6SL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
|
|
clks[IMX6SL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
|
|
clks[IMX6SL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
|
|
clks[IMX6SL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
|
|
clks[IMX6SL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
|
|
clks[IMX6SL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
|
|
clks[IMX6SL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
|
|
|
|
/* Do not bypass PLLs initially */
|
|
clk_set_parent(clks[IMX6SL_PLL1_BYPASS], clks[IMX6SL_CLK_PLL1]);
|
|
clk_set_parent(clks[IMX6SL_PLL2_BYPASS], clks[IMX6SL_CLK_PLL2]);
|
|
clk_set_parent(clks[IMX6SL_PLL3_BYPASS], clks[IMX6SL_CLK_PLL3]);
|
|
clk_set_parent(clks[IMX6SL_PLL4_BYPASS], clks[IMX6SL_CLK_PLL4]);
|
|
clk_set_parent(clks[IMX6SL_PLL5_BYPASS], clks[IMX6SL_CLK_PLL5]);
|
|
clk_set_parent(clks[IMX6SL_PLL6_BYPASS], clks[IMX6SL_CLK_PLL6]);
|
|
clk_set_parent(clks[IMX6SL_PLL7_BYPASS], clks[IMX6SL_CLK_PLL7]);
|
|
|
|
clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
|
|
clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
|
|
clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
|
|
clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
|
|
clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
|
|
clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
|
|
clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
|
|
|
|
clks[IMX6SL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
|
|
clks[IMX6SL_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12));
|
|
clks[IMX6SL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
|
|
|
|
/*
|
|
* usbphy1 and usbphy2 are implemented as dummy gates using reserve
|
|
* bit 20. They are used by phy driver to keep the refcount of
|
|
* parent PLL correct. usbphy1_gate and usbphy2_gate only needs to be
|
|
* turned on during boot, and software will not need to control it
|
|
* anymore after that.
|
|
*/
|
|
clks[IMX6SL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
|
|
clks[IMX6SL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
|
|
clks[IMX6SL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
|
|
clks[IMX6SL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
|
|
|
|
/* dev name parent_name flags reg shift width div: flags, div_table lock */
|
|
clks[IMX6SL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
|
|
clks[IMX6SL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
|
|
clks[IMX6SL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
|
|
clks[IMX6SL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
|
|
clks[IMX6SL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
|
|
|
|
/* name parent_name reg idx */
|
|
clks[IMX6SL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0", "pll2_bus", base + 0x100, 0);
|
|
clks[IMX6SL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", base + 0x100, 1);
|
|
clks[IMX6SL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", base + 0x100, 2);
|
|
clks[IMX6SL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0", "pll3_usb_otg", base + 0xf0, 0);
|
|
clks[IMX6SL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", base + 0xf0, 1);
|
|
clks[IMX6SL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", base + 0xf0, 2);
|
|
clks[IMX6SL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", base + 0xf0, 3);
|
|
|
|
/* name parent_name mult div */
|
|
clks[IMX6SL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2", 1, 2);
|
|
clks[IMX6SL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
|
|
clks[IMX6SL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
|
|
clks[IMX6SL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
|
|
|
|
np = ccm_node;
|
|
base = of_iomap(np, 0);
|
|
WARN_ON(!base);
|
|
ccm_base = base;
|
|
|
|
/* name reg shift width parent_names num_parents */
|
|
clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
|
|
clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
|
|
clks[IMX6SL_CLK_OCRAM_ALT_SEL] = imx_clk_mux("ocram_alt_sel", base + 0x14, 7, 1, ocram_alt_sels, ARRAY_SIZE(ocram_alt_sels));
|
|
clks[IMX6SL_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 1, ocram_sels, ARRAY_SIZE(ocram_sels));
|
|
clks[IMX6SL_CLK_PRE_PERIPH2_SEL] = imx_clk_mux("pre_periph2_sel", base + 0x18, 21, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
|
|
clks[IMX6SL_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
|
|
clks[IMX6SL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
|
|
clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
|
|
clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
|
|
clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, lcdif_axi_sels, ARRAY_SIZE(lcdif_axi_sels));
|
|
clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
|
|
clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
|
|
clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
|
|
clks[IMX6SL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
|
|
clks[IMX6SL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
|
|
clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
|
|
clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
|
|
clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup);
|
|
clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, pxp_axi_sels, ARRAY_SIZE(pxp_axi_sels));
|
|
clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_axi_sels, ARRAY_SIZE(epdc_axi_sels));
|
|
clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels));
|
|
clks[IMX6SL_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", base + 0x18, 8, 2, gpu2d_sels, ARRAY_SIZE(gpu2d_sels));
|
|
clks[IMX6SL_CLK_LCDIF_PIX_SEL] = imx_clk_mux("lcdif_pix_sel", base + 0x38, 6, 3, lcdif_pix_sels, ARRAY_SIZE(lcdif_pix_sels));
|
|
clks[IMX6SL_CLK_EPDC_PIX_SEL] = imx_clk_mux("epdc_pix_sel", base + 0x38, 15, 3, epdc_pix_sels, ARRAY_SIZE(epdc_pix_sels));
|
|
clks[IMX6SL_CLK_SPDIF0_SEL] = imx_clk_mux("spdif0_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
|
|
clks[IMX6SL_CLK_SPDIF1_SEL] = imx_clk_mux("spdif1_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
|
|
clks[IMX6SL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
|
|
clks[IMX6SL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
|
|
clks[IMX6SL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
|
|
|
|
/* name reg shift width busy: reg, shift parent_names num_parents */
|
|
clks[IMX6SL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
|
|
clks[IMX6SL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
|
|
|
|
/* name parent_name reg shift width */
|
|
clks[IMX6SL_CLK_OCRAM_PODF] = imx_clk_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3);
|
|
clks[IMX6SL_CLK_PERIPH_CLK2_PODF] = imx_clk_divider("periph_clk2_podf", "periph_clk2_sel", base + 0x14, 27, 3);
|
|
clks[IMX6SL_CLK_PERIPH2_CLK2_PODF] = imx_clk_divider("periph2_clk2_podf", "periph2_clk2_sel", base + 0x14, 0, 3);
|
|
clks[IMX6SL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
|
|
clks[IMX6SL_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
|
|
clks[IMX6SL_CLK_LCDIF_AXI_PODF] = imx_clk_divider("lcdif_axi_podf", "lcdif_axi_sel", base + 0x3c, 16, 3);
|
|
clks[IMX6SL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
|
|
clks[IMX6SL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
|
|
clks[IMX6SL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
|
|
clks[IMX6SL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
|
|
clks[IMX6SL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
|
|
clks[IMX6SL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
|
|
clks[IMX6SL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
|
|
clks[IMX6SL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
|
|
clks[IMX6SL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
|
|
clks[IMX6SL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
|
|
clks[IMX6SL_CLK_PERCLK] = imx_clk_fixup_divider("perclk", "perclk_sel", base + 0x1c, 0, 6, imx_cscmr1_fixup);
|
|
clks[IMX6SL_CLK_PXP_AXI_PODF] = imx_clk_divider("pxp_axi_podf", "pxp_axi_sel", base + 0x34, 3, 3);
|
|
clks[IMX6SL_CLK_EPDC_AXI_PODF] = imx_clk_divider("epdc_axi_podf", "epdc_axi_sel", base + 0x34, 12, 3);
|
|
clks[IMX6SL_CLK_GPU2D_OVG_PODF] = imx_clk_divider("gpu2d_ovg_podf", "gpu2d_ovg_sel", base + 0x18, 26, 3);
|
|
clks[IMX6SL_CLK_GPU2D_PODF] = imx_clk_divider("gpu2d_podf", "gpu2d_sel", base + 0x18, 29, 3);
|
|
clks[IMX6SL_CLK_LCDIF_PIX_PRED] = imx_clk_divider("lcdif_pix_pred", "lcdif_pix_sel", base + 0x38, 3, 3);
|
|
clks[IMX6SL_CLK_EPDC_PIX_PRED] = imx_clk_divider("epdc_pix_pred", "epdc_pix_sel", base + 0x38, 12, 3);
|
|
clks[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_fixup_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3, imx_cscmr1_fixup);
|
|
clks[IMX6SL_CLK_EPDC_PIX_PODF] = imx_clk_divider("epdc_pix_podf", "epdc_pix_pred", base + 0x18, 23, 3);
|
|
clks[IMX6SL_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", base + 0x30, 25, 3);
|
|
clks[IMX6SL_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", base + 0x30, 22, 3);
|
|
clks[IMX6SL_CLK_SPDIF1_PRED] = imx_clk_divider("spdif1_pred", "spdif1_sel", base + 0x30, 12, 3);
|
|
clks[IMX6SL_CLK_SPDIF1_PODF] = imx_clk_divider("spdif1_podf", "spdif1_pred", base + 0x30, 9, 3);
|
|
clks[IMX6SL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x28, 9, 3);
|
|
clks[IMX6SL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x28, 25, 3);
|
|
clks[IMX6SL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "ecspi_sel", base + 0x38, 19, 6);
|
|
clks[IMX6SL_CLK_UART_ROOT] = imx_clk_divider("uart_root", "uart_sel", base + 0x24, 0, 6);
|
|
|
|
/* name parent_name reg shift width busy: reg, shift */
|
|
clks[IMX6SL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
|
|
clks[IMX6SL_CLK_MMDC_ROOT] = imx_clk_busy_divider("mmdc", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
|
|
clks[IMX6SL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
|
|
|
|
/* name parent_name reg shift */
|
|
clks[IMX6SL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
|
|
clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
|
|
clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
|
|
clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
|
|
clks[IMX6SL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
|
|
clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12);
|
|
clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14);
|
|
clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16);
|
|
clks[IMX6SL_CLK_GPT] = imx_clk_gate2("gpt", "perclk", base + 0x6c, 20);
|
|
clks[IMX6SL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22);
|
|
clks[IMX6SL_CLK_GPU2D_OVG] = imx_clk_gate2("gpu2d_ovg", "gpu2d_ovg_podf", base + 0x6c, 26);
|
|
clks[IMX6SL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
|
|
clks[IMX6SL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
|
|
clks[IMX6SL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
|
|
clks[IMX6SL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
|
|
clks[IMX6SL_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x74, 0);
|
|
clks[IMX6SL_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "pxp_axi_podf", base + 0x74, 2);
|
|
clks[IMX6SL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_axi", "epdc_axi_podf", base + 0x74, 4);
|
|
clks[IMX6SL_CLK_LCDIF_AXI] = imx_clk_gate2("lcdif_axi", "lcdif_axi_podf", base + 0x74, 6);
|
|
clks[IMX6SL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_pix_podf", base + 0x74, 8);
|
|
clks[IMX6SL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_pix_podf", base + 0x74, 10);
|
|
clks[IMX6SL_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28);
|
|
clks[IMX6SL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16);
|
|
clks[IMX6SL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18);
|
|
clks[IMX6SL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20);
|
|
clks[IMX6SL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22);
|
|
clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6);
|
|
clks[IMX6SL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
|
|
clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif0_podf", base + 0x7c, 14, &share_count_spdif);
|
|
clks[IMX6SL_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_spdif);
|
|
clks[IMX6SL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
|
|
clks[IMX6SL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
|
|
clks[IMX6SL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
|
|
clks[IMX6SL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
|
|
clks[IMX6SL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
|
|
clks[IMX6SL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
|
|
clks[IMX6SL_CLK_UART] = imx_clk_gate2("uart", "ipg", base + 0x7c, 24);
|
|
clks[IMX6SL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_root", base + 0x7c, 26);
|
|
clks[IMX6SL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
|
|
clks[IMX6SL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
|
|
clks[IMX6SL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
|
|
clks[IMX6SL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
|
|
clks[IMX6SL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
|
|
|
|
/* Ensure the MMDC CH0 handshake is bypassed */
|
|
writel_relaxed(readl_relaxed(base + CCDR) |
|
|
BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
|
|
|
|
imx_check_clocks(clks, ARRAY_SIZE(clks));
|
|
|
|
clk_data.clks = clks;
|
|
clk_data.clk_num = ARRAY_SIZE(clks);
|
|
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
|
|
|
|
/* Ensure the AHB clk is at 132MHz. */
|
|
ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
|
|
if (ret)
|
|
pr_warn("%s: failed to set AHB clock rate %d!\n",
|
|
__func__, ret);
|
|
|
|
/*
|
|
* Make sure those always on clocks are enabled to maintain the correct
|
|
* usecount and enabling/disabling of parent PLLs.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
|
|
clk_prepare_enable(clks[clks_init_on[i]]);
|
|
|
|
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
|
|
clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]);
|
|
clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);
|
|
}
|
|
|
|
/* Audio-related clocks configuration */
|
|
clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);
|
|
|
|
/* set PLL5 video as lcdif pix parent clock */
|
|
clk_set_parent(clks[IMX6SL_CLK_LCDIF_PIX_SEL],
|
|
clks[IMX6SL_CLK_PLL5_VIDEO_DIV]);
|
|
|
|
clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL],
|
|
clks[IMX6SL_CLK_PLL2_PFD2]);
|
|
|
|
imx_register_uart_clocks(uart_clks);
|
|
}
|
|
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
|