fee50d6688
Changes in 4.9.298
Bluetooth: bfusb: fix division by zero in send path
USB: core: Fix bug in resuming hub's handling of wakeup requests
USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe()
can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data
can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}
random: fix data race on crng_node_pool
random: fix data race on crng init time
staging: wlan-ng: Avoid bitwise vs logical OR warning in hfa384x_usb_throttlefn()
drm/i915: Avoid bitwise vs logical OR warning in snb_wm_latency_quirk()
media: uvcvideo: fix division by zero at stream start
rtlwifi: rtl8192cu: Fix WARNING when calling local_irq_restore() with interrupts enabled
HID: uhid: Fix worker destroying device without any protection
HID: wacom: Avoid using stale array indicies to read contact count
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
rtc: cmos: take rtc_lock while reading from CMOS
media: flexcop-usb: fix control-message timeouts
media: mceusb: fix control-message timeouts
media: em28xx: fix control-message timeouts
media: cpia2: fix control-message timeouts
media: s2255: fix control-message timeouts
media: dib0700: fix undefined behavior in tuner shutdown
media: redrat3: fix control-message timeouts
media: pvrusb2: fix control-message timeouts
media: stk1160: fix control-message timeouts
can: softing_cs: softingcs_probe(): fix memleak on registration failure
PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode
Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() fails
wcn36xx: Indicate beacon not connection loss on MISSED_BEACON_IND
Bluetooth: stop proccessing malicious adv data
media: dmxdev: fix UAF when dvb_register_device() fails
crypto: qce - fix uaf on qce_ahash_register_one
tty: serial: atmel: Check return code of dmaengine_submit()
tty: serial: atmel: Call dma_async_issue_pending()
netfilter: bridge: add support for pppoe filtering
arm64: dts: qcom: msm8916: fix MMC controller aliases
drm/amdgpu: Fix a NULL pointer dereference in amdgpu_connector_lcd_native_mode()
drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()
serial: amba-pl011: do not request memory region twice
floppy: Fix hang in watchdog when disk is ejected
media: dib8000: Fix a memleak in dib8000_init()
media: saa7146: mxb: Fix a NULL pointer dereference in mxb_attach()
media: si2157: Fix "warm" tuner state detection
media: msi001: fix possible null-ptr-deref in msi001_probe()
usb: ftdi-elan: fix memory leak on device disconnect
pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in __nonstatic_find_io_region()
pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in nonstatic_find_mem_region()
ppp: ensure minimum packet size in ppp_write()
fsl/fman: Check for null pointer after calling devm_ioremap
spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe
can: softing: softing_startstop(): fix set but not used variable warning
can: xilinx_can: xcan_probe(): check for error irq
pcmcia: fix setting of kthread task states
net: mcs7830: handle usb read errors properly
ext4: avoid trim error on fs with small groups
ALSA: jack: Add missing rwsem around snd_ctl_remove() calls
ALSA: PCM: Add missing rwsem around snd_ctl_remove() calls
ALSA: hda: Add missing rwsem around snd_ctl_remove() calls
RDMA/hns: Validate the pkey index
powerpc/prom_init: Fix improper check of prom_getprop()
ALSA: oss: fix compile error when OSS_DEBUG is enabled
char/mwave: Adjust io port register size
scsi: ufs: Fix race conditions related to driver data
RDMA/core: Let ib_find_gid() continue search even after empty entry
dmaengine: pxa/mmp: stop referencing config->slave_id
ASoC: samsung: idma: Check of ioremap return value
misc: lattice-ecp3-config: Fix task hung when firmware load failed
mips: lantiq: add support for clk_set_parent()
mips: bcm63xx: add support for clk_set_parent()
RDMA/cxgb4: Set queue pair state when being queried
Bluetooth: Fix debugfs entry leak in hci_register_dev()
fs: dlm: filter user dlm messages for kernel locks
ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply
usb: gadget: f_fs: Use stream_open() for endpoint files
HID: apple: Do not reset quirks when the Fn key is not found
media: b2c2: Add missing check in flexcop_pci_isr:
gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use
HSI: core: Fix return freed object in hsi_new_client
mwifiex: Fix skb_over_panic in mwifiex_usb_recv()
floppy: Add max size check for user space request
media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()
media: m920x: don't use stack on USB reads
iwlwifi: mvm: synchronize with FW after multicast commands
ath10k: Fix tx hanging
net: bonding: debug: avoid printing debug logs when bond is not notifying peers
media: igorplugusb: receiver overflow should be reported
media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()
usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream
um: registers: Rename function names to avoid conflicts and build problems
jffs2: GC deadlock reading a page that is used in jffs2_write_begin()
ACPICA: Utilities: Avoid deleting the same object twice in a row
ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
btrfs: remove BUG_ON() in find_parent_nodes()
btrfs: remove BUG_ON(!eie) in find_parent_nodes
net: mdio: Demote probed message to debug print
dm btree: add a defensive bounds check to insert_at()
dm space map common: add bounds check to sm_ll_lookup_bitmap()
serial: pl010: Drop CR register reset on set_termios
serial: core: Keep mctrl register state and cached copy in sync
parisc: Avoid calling faulthandler_disabled() twice
powerpc/6xx: add missing of_node_put
powerpc/powernv: add missing of_node_put
powerpc/cell: add missing of_node_put
powerpc/btext: add missing of_node_put
i2c: i801: Don't silently correct invalid transfer size
powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING
i2c: mpc: Correct I2C reset procedure
w1: Misuse of get_user()/put_user() reported by sparse
ALSA: seq: Set upper limit of processed events
i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
MIPS: Octeon: Fix build errors using clang
scsi: sr: Don't use GFP_DMA
ASoC: mediatek: mt8173: fix device_node leak
power: bq25890: Enable continuous conversion for ADC at charging
ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffers
iwlwifi: mvm: Increase the scan timeout guard to 30 seconds
ext4: set csum seed in tmp inode while migrating to extents
ext4: Fix BUG_ON in ext4_bread when write quota data
ext4: don't use the orphan list when migrating an inode
fuse: fix bad inode
fuse: fix live lock in fuse_iget()
drm/radeon: fix error handling in radeon_driver_open_kms
RDMA/hns: Modify the mapping attribute of doorbell to device
RDMA/rxe: Fix a typo in opcode name
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries
af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: fix number of TX ring slots for available check
netns: add schedule point in ops_exit_list()
libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route()
dmaengine: at_xdmac: Don't start transactions at tx_submit level
dmaengine: at_xdmac: Print debug message after realeasing the lock
dmaengine: at_xdmac: Fix lld view setting
dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
net_sched: restore "mpu xxx" handling
bcmgenet: add WOL IRQ check
scripts/dtc: dtx_diff: remove broken example from help text
lib82596: Fix IRQ check in sni_82596_probe
Revert "gup: document and work around "COW can break either way" issue"
gup: document and work around "COW can break either way" issue
drm/ttm/nouveau: don't call tt destroy callback on alloc failure.
gianfar: simplify FCS handling and fix memory leak
gianfar: fix jumbo packets+napi+rx overrun crash
cipso,calipso: resolve a number of problems with the DOI refcounts
rbtree: cache leftmost node internally
lib/timerqueue: Rely on rbtree semantics for next timer
mm: add follow_pte_pmd()
KVM: do not assume PTE is writable after follow_pfn
KVM: Use kvm_pfn_t for local PFN variable in hva_to_pfn_remapped()
KVM: do not allow mapping valid but non-reference-counted pages
Linux 4.9.298
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ifcea82a702a0906d9090c89785363c2d5423f652
Module options
--------------
The mwave module takes the following options. Note that these options
are not saved by the BIOS and so do not persist after unload and reload.
mwave_debug=value, where value is bitwise OR of trace flags:
0x0001 mwavedd api tracing
0x0002 smapi api tracing
0x0004 3780i tracing
0x0008 tp3780i tracing
Tracing only occurs if the driver has been compiled with the
MW_TRACE macro #defined (i.e. let ccflags-y := -DMW_TRACE
in the Makefile).
mwave_3780i_irq=5/7/10/11/15
If the dsp irq has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
irq used by the dsp to be configured.
mwave_3780i_io=0x130/0x350/0x0070/0xDB0
If the dsp io range has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
io range used by the dsp to be configured.
mwave_uart_irq=3/4
If the mwave's uart irq has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
irq used by the mwave uart to be configured.
mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8
If the uart io range has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
io range used by the mwave uart to be configured.
Example to enable the 3780i DSP using ttyS1 resources:
insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8
Accessing the driver
--------------------
You must also create a node for the driver:
mkdir -p /dev/modems
mknod --mode=660 /dev/modems/mwave c 10 219