Changes in 4.9.207 arm64: tegra: Fix 'active-low' warning for Jetson TX1 regulator usb: gadget: u_serial: add missing port entry locking tty: serial: fsl_lpuart: use the sg count from dma_map_sg tty: serial: msm_serial: Fix flow control serial: pl011: Fix DMA ->flush_buffer() serial: serial_core: Perform NULL checks for break_ctl ops serial: ifx6x60: add missed pm_runtime_disable autofs: fix a leak in autofs_expire_indirect() RDMA/hns: Correct the value of HNS_ROCE_HEM_CHUNK_LEN exportfs_decode_fh(): negative pinned may become positive without the parent locked audit_get_nd(): don't unlock parent too early NFC: nxp-nci: Fix NULL pointer dereference after I2C communication error Input: cyttsp4_core - fix use after free bug ALSA: pcm: Fix stream lock usage in snd_pcm_period_elapsed() rsxx: add missed destroy_workqueue calls in remove net: ep93xx_eth: fix mismatch of request_mem_region in remove serial: core: Allow processing sysrq at port unlock time cxgb4vf: fix memleak in mac_hlist initialization iwlwifi: mvm: Send non offchannel traffic via AP sta ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+ net/mlx5: Release resource on error flow extcon: max8997: Fix lack of path setting in USB device mode clk: rockchip: fix rk3188 sclk_smc gate data clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering ARM: dts: rockchip: Fix rk3288-rock2 vcc_flash name dlm: fix missing idr_destroy for recover_idr MIPS: SiByte: Enable ZONE_DMA32 for LittleSur scsi: zfcp: drop default switch case which might paper over missing case pinctrl: qcom: ssbi-gpio: fix gpio-hog related boot issues Staging: iio: adt7316: Fix i2c data reading, set the data field regulator: Fix return value of _set_load() stub MIPS: OCTEON: octeon-platform: fix typing math-emu/soft-fp.h: (_FP_ROUND_ZERO) cast 0 to void to fix warning rtc: max8997: Fix the returned value in case of error in 'max8997_rtc_read_alarm()' rtc: dt-binding: abx80x: fix resistance scale ARM: dts: exynos: Use Samsung SoC specific compatible for DWC2 module media: pulse8-cec: return 0 when invalidating the logical address dmaengine: coh901318: Fix a double-lock bug dmaengine: coh901318: Remove unused variable usb: dwc3: don't log probe deferrals; but do log other error codes ACPI: fix acpi_find_child_device() invocation in acpi_preset_companion() dma-mapping: fix return type of dma_set_max_seg_size() altera-stapl: check for a null key before strcasecmp'ing it serial: imx: fix error handling in console_setup i2c: imx: don't print error message on probe defer dlm: NULL check before kmem_cache_destroy is not needed ARM: debug: enable UART1 for socfpga Cyclone5 nfsd: fix a warning in __cld_pipe_upcall() ARM: OMAP1/2: fix SoC name printing net/x25: fix called/calling length calculation in x25_parse_address_block net/x25: fix null_x25_address handling ARM: dts: mmp2: fix the gpio interrupt cell number ARM: dts: realview-pbx: Fix duplicate regulator nodes tcp: fix off-by-one bug on aborting window-probing socket tcp: fix SNMP TCP timeout under-estimation modpost: skip ELF local symbols during section mismatch check kbuild: fix single target build for external module mtd: fix mtd_oobavail() incoherent returned value ARM: dts: pxa: clean up USB controller nodes clk: sunxi-ng: h3/h5: Fix CSI_MCLK parent ARM: dts: realview: Fix some more duplicate regulator nodes dlm: fix invalid cluster name warning net/mlx4_core: Fix return codes of unsupported operations powerpc/math-emu: Update macros from GCC MIPS: OCTEON: cvmx_pko_mem_debug8: use oldest forward compatible definition nfsd: Return EPERM, not EACCES, in some SETATTR cases tty: Don't block on IO when ldisc change is pending media: stkwebcam: Bugfix for wrong return values mlx4: Use snprintf instead of complicated strcpy ARM: dts: sunxi: Fix PMU compatible strings sched/fair: Scale bandwidth quota and period without losing quota/period ratio precision fuse: verify nlink fuse: verify attributes ALSA: pcm: oss: Avoid potential buffer overflows Input: goodix - add upside-down quirk for Teclast X89 tablet coresight: etm4x: Fix input validation for sysfs. x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks CIFS: Fix SMB2 oplock break processing tty: vt: keyboard: reject invalid keycodes can: slcan: Fix use-after-free Read in slcan_open jbd2: Fix possible overflow in jbd2_log_space_left() drm/i810: Prevent underflow in ioctl KVM: x86: do not modify masked bits of shared MSRs KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES crypto: crypto4xx - fix double-free in crypto4xx_destroy_sdr crypto: ccp - fix uninitialized list head crypto: ecdh - fix big endian bug in ECC library crypto: user - fix memory leak in crypto_report spi: atmel: Fix CS high support RDMA/qib: Validate ->show()/store() callbacks before calling them thermal: Fix deadlock in thermal thermal_zone_device_check KVM: x86: fix out-of-bounds write in KVM_GET_EMULATED_CPUID (CVE-2019-19332) appletalk: Fix potential NULL pointer dereference in unregister_snap_client appletalk: Set error code if register_snap_client failed usb: gadget: configfs: Fix missing spin_lock_init() USB: uas: honor flag to avoid CAPACITY16 USB: uas: heed CAPACITY_HEURISTICS usb: Allow USB device to be warm reset in suspended state staging: rtl8188eu: fix interface sanity check staging: rtl8712: fix interface sanity check staging: gigaset: fix general protection fault on probe staging: gigaset: fix illegal free on probe errors staging: gigaset: add endpoint-type sanity check xhci: Increase STS_HALT timeout in xhci_suspend() ARM: dts: pandora-common: define wl1251 as child node of mmc3 iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting USB: atm: ueagle-atm: add missing endpoint check USB: idmouse: fix interface sanity checks USB: serial: io_edgeport: fix epic endpoint lookup USB: adutux: fix interface sanity check usb: core: urb: fix URB structure initialization function usb: mon: Fix a deadlock in usbmon between mmap and read mtd: spear_smi: Fix Write Burst mode virtio-balloon: fix managed page counts when migrating pages between zones btrfs: check page->mapping when loading free space cache btrfs: Remove btrfs_bio::flags member Btrfs: send, skip backreference walking for extents with many references btrfs: record all roots for rename exchange on a subvol rtlwifi: rtl8192de: Fix missing code to retrieve RX buffer address rtlwifi: rtl8192de: Fix missing callback that tests for hw release of buffer rtlwifi: rtl8192de: Fix missing enable interrupt flag lib: raid6: fix awk build warnings ALSA: hda - Fix pending unsol events at shutdown workqueue: Fix spurious sanity check failures in destroy_workqueue() workqueue: Fix pwq ref leak in rescuer_thread() ASoC: Jack: Fix NULL pointer dereference in snd_soc_jack_report blk-mq: avoid sysfs buffer overflow with too many CPU cores cgroup: pids: use atomic64_t for pids->limit ar5523: check NULL before memcpy() in ar5523_cmd() media: bdisp: fix memleak on release media: radio: wl1273: fix interrupt masking on release cpuidle: Do not unset the driver if it is there already PM / devfreq: Lock devfreq in trans_stat_show ACPI: OSL: only free map once in osl.c ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data() ACPI: PM: Avoid attaching ACPI PM domain to certain devices pinctrl: samsung: Fix device node refcount leaks in S3C24xx wakeup controller init pinctrl: samsung: Fix device node refcount leaks in init code mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card ppdev: fix PPGETTIME/PPSETTIME ioctls powerpc: Allow 64bit VDSO __kernel_sync_dicache to work across ranges >4GB video/hdmi: Fix AVI bar unpack quota: Check that quota is not dirty before release ext2: check err when partial != NULL quota: fix livelock in dquot_writeback_dquots scsi: zfcp: trace channel log even for FCP command responses usb: xhci: only set D3hot for pci device xhci: Fix memory leak in xhci_add_in_port() xhci: make sure interrupts are restored to correct state iio: adis16480: Add debugfs_reg_access entry Btrfs: fix negative subv_writers counter and data space leak after buffered write omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251 scsi: lpfc: Cap NPIV vports to 256 e100: Fix passing zero to 'PTR_ERR' warning in e100_load_ucode_wait x86/MCE/AMD: Turn off MC4_MISC thresholding on all family 0x15 models x86/MCE/AMD: Carve out the MC4_MISC thresholding quirk ath10k: fix fw crash by moving chip reset after napi disabled ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity pinctrl: samsung: Fix device node refcount leaks in S3C64xx wakeup controller init scsi: qla2xxx: Fix DMA unmap leak scsi: qla2xxx: Fix session lookup in qlt_abort_work() scsi: qla2xxx: Fix qla24xx_process_bidir_cmd() scsi: qla2xxx: Always check the qla2x00_wait_for_hba_online() return value powerpc: Fix vDSO clock_getres() reiserfs: fix extended attributes on the root directory firmware: qcom: scm: Ensure 'a0' status code is treated as signed mm/shmem.c: cast the type of unmap_start to u64 ext4: fix a bug in ext4_wait_for_tail_page_commit blk-mq: make sure that line break can be printed workqueue: Fix missing kfree(rescuer) in destroy_workqueue() sunrpc: fix crash when cache_head become valid before update net/mlx5e: Fix SFF 8472 eeprom length kernel/module.c: wakeup processes in module_wq on module unload nvme: host: core: fix precedence of ternary operator net: bridge: deny dev_set_mac_address() when unregistering net: ethernet: ti: cpsw: fix extra rx interrupt openvswitch: support asymmetric conntrack tcp: md5: fix potential overestimation of TCP option space tipc: fix ordering of tipc module init and exit routine inet: protect against too small mtu values. tcp: fix rejected syncookies due to stale timestamps tcp: tighten acceptance of ACKs not matching a child socket tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() Revert "regulator: Defer init completion for a while after late_initcall" PCI: Fix Intel ACS quirk UPDCR register address PCI/MSI: Fix incorrect MSI-X masking on resume xtensa: fix TLB sanity checker CIFS: Respect O_SYNC and O_DIRECT flags during reconnect ARM: dts: s3c64xx: Fix init order of clock providers ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() vfio/pci: call irq_bypass_unregister_producer() before freeing irq dma-buf: Fix memory leak in sync_file_merge() dm btree: increase rebalance threshold in __rebalance2() scsi: iscsi: Fix a potential deadlock in the timeout handler drm/radeon: fix r1xx/r2xx register checker for POT textures xhci: fix USB3 device initiated resume race with roothub autosuspend net: stmmac: use correct DMA buffer size in the RX descriptor net: stmmac: don't stop NAPI processing when dropping a packet Linux 4.9.207 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
308 lines
9.3 KiB
C
308 lines
9.3 KiB
C
/***********************license start***************
|
|
* Author: Cavium Networks
|
|
*
|
|
* Contact: support@caviumnetworks.com
|
|
* This file is part of the OCTEON SDK
|
|
*
|
|
* Copyright (c) 2003-2008 Cavium Networks
|
|
*
|
|
* This file is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License, Version 2, as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This file is distributed in the hope that it will be useful, but
|
|
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
|
|
* NONINFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this file; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
* or visit http://www.gnu.org/licenses/.
|
|
*
|
|
* This file may also be available under a different license from Cavium.
|
|
* Contact Cavium Networks for more information
|
|
***********************license end**************************************/
|
|
|
|
/*
|
|
* Support functions for managing command queues used for
|
|
* various hardware blocks.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <asm/octeon/octeon.h>
|
|
|
|
#include <asm/octeon/cvmx-config.h>
|
|
#include <asm/octeon/cvmx-fpa.h>
|
|
#include <asm/octeon/cvmx-cmd-queue.h>
|
|
|
|
#include <asm/octeon/cvmx-npei-defs.h>
|
|
#include <asm/octeon/cvmx-pexp-defs.h>
|
|
#include <asm/octeon/cvmx-pko-defs.h>
|
|
|
|
/**
|
|
* This application uses this pointer to access the global queue
|
|
* state. It points to a bootmem named block.
|
|
*/
|
|
__cvmx_cmd_queue_all_state_t *__cvmx_cmd_queue_state_ptr;
|
|
EXPORT_SYMBOL_GPL(__cvmx_cmd_queue_state_ptr);
|
|
|
|
/**
|
|
* Initialize the Global queue state pointer.
|
|
*
|
|
* Returns CVMX_CMD_QUEUE_SUCCESS or a failure code
|
|
*/
|
|
static cvmx_cmd_queue_result_t __cvmx_cmd_queue_init_state_ptr(void)
|
|
{
|
|
char *alloc_name = "cvmx_cmd_queues";
|
|
#if defined(CONFIG_CAVIUM_RESERVE32) && CONFIG_CAVIUM_RESERVE32
|
|
extern uint64_t octeon_reserve32_memory;
|
|
#endif
|
|
|
|
if (likely(__cvmx_cmd_queue_state_ptr))
|
|
return CVMX_CMD_QUEUE_SUCCESS;
|
|
|
|
#if defined(CONFIG_CAVIUM_RESERVE32) && CONFIG_CAVIUM_RESERVE32
|
|
if (octeon_reserve32_memory)
|
|
__cvmx_cmd_queue_state_ptr =
|
|
cvmx_bootmem_alloc_named_range(sizeof(*__cvmx_cmd_queue_state_ptr),
|
|
octeon_reserve32_memory,
|
|
octeon_reserve32_memory +
|
|
(CONFIG_CAVIUM_RESERVE32 <<
|
|
20) - 1, 128, alloc_name);
|
|
else
|
|
#endif
|
|
__cvmx_cmd_queue_state_ptr =
|
|
cvmx_bootmem_alloc_named(sizeof(*__cvmx_cmd_queue_state_ptr),
|
|
128,
|
|
alloc_name);
|
|
if (__cvmx_cmd_queue_state_ptr)
|
|
memset(__cvmx_cmd_queue_state_ptr, 0,
|
|
sizeof(*__cvmx_cmd_queue_state_ptr));
|
|
else {
|
|
struct cvmx_bootmem_named_block_desc *block_desc =
|
|
cvmx_bootmem_find_named_block(alloc_name);
|
|
if (block_desc)
|
|
__cvmx_cmd_queue_state_ptr =
|
|
cvmx_phys_to_ptr(block_desc->base_addr);
|
|
else {
|
|
cvmx_dprintf
|
|
("ERROR: cvmx_cmd_queue_initialize: Unable to get named block %s.\n",
|
|
alloc_name);
|
|
return CVMX_CMD_QUEUE_NO_MEMORY;
|
|
}
|
|
}
|
|
return CVMX_CMD_QUEUE_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* Initialize a command queue for use. The initial FPA buffer is
|
|
* allocated and the hardware unit is configured to point to the
|
|
* new command queue.
|
|
*
|
|
* @queue_id: Hardware command queue to initialize.
|
|
* @max_depth: Maximum outstanding commands that can be queued.
|
|
* @fpa_pool: FPA pool the command queues should come from.
|
|
* @pool_size: Size of each buffer in the FPA pool (bytes)
|
|
*
|
|
* Returns CVMX_CMD_QUEUE_SUCCESS or a failure code
|
|
*/
|
|
cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
|
|
int max_depth, int fpa_pool,
|
|
int pool_size)
|
|
{
|
|
__cvmx_cmd_queue_state_t *qstate;
|
|
cvmx_cmd_queue_result_t result = __cvmx_cmd_queue_init_state_ptr();
|
|
if (result != CVMX_CMD_QUEUE_SUCCESS)
|
|
return result;
|
|
|
|
qstate = __cvmx_cmd_queue_get_state(queue_id);
|
|
if (qstate == NULL)
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
|
|
/*
|
|
* We artificially limit max_depth to 1<<20 words. It is an
|
|
* arbitrary limit.
|
|
*/
|
|
if (CVMX_CMD_QUEUE_ENABLE_MAX_DEPTH) {
|
|
if ((max_depth < 0) || (max_depth > 1 << 20))
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
} else if (max_depth != 0)
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
|
|
if ((fpa_pool < 0) || (fpa_pool > 7))
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
if ((pool_size < 128) || (pool_size > 65536))
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
|
|
/* See if someone else has already initialized the queue */
|
|
if (qstate->base_ptr_div128) {
|
|
if (max_depth != (int)qstate->max_depth) {
|
|
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
|
|
"Queue already initialized with different "
|
|
"max_depth (%d).\n",
|
|
(int)qstate->max_depth);
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
}
|
|
if (fpa_pool != qstate->fpa_pool) {
|
|
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
|
|
"Queue already initialized with different "
|
|
"FPA pool (%u).\n",
|
|
qstate->fpa_pool);
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
}
|
|
if ((pool_size >> 3) - 1 != qstate->pool_size_m1) {
|
|
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
|
|
"Queue already initialized with different "
|
|
"FPA pool size (%u).\n",
|
|
(qstate->pool_size_m1 + 1) << 3);
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
}
|
|
CVMX_SYNCWS;
|
|
return CVMX_CMD_QUEUE_ALREADY_SETUP;
|
|
} else {
|
|
union cvmx_fpa_ctl_status status;
|
|
void *buffer;
|
|
|
|
status.u64 = cvmx_read_csr(CVMX_FPA_CTL_STATUS);
|
|
if (!status.s.enb) {
|
|
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
|
|
"FPA is not enabled.\n");
|
|
return CVMX_CMD_QUEUE_NO_MEMORY;
|
|
}
|
|
buffer = cvmx_fpa_alloc(fpa_pool);
|
|
if (buffer == NULL) {
|
|
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
|
|
"Unable to allocate initial buffer.\n");
|
|
return CVMX_CMD_QUEUE_NO_MEMORY;
|
|
}
|
|
|
|
memset(qstate, 0, sizeof(*qstate));
|
|
qstate->max_depth = max_depth;
|
|
qstate->fpa_pool = fpa_pool;
|
|
qstate->pool_size_m1 = (pool_size >> 3) - 1;
|
|
qstate->base_ptr_div128 = cvmx_ptr_to_phys(buffer) / 128;
|
|
/*
|
|
* We zeroed the now serving field so we need to also
|
|
* zero the ticket.
|
|
*/
|
|
__cvmx_cmd_queue_state_ptr->
|
|
ticket[__cvmx_cmd_queue_get_index(queue_id)] = 0;
|
|
CVMX_SYNCWS;
|
|
return CVMX_CMD_QUEUE_SUCCESS;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Shutdown a queue a free it's command buffers to the FPA. The
|
|
* hardware connected to the queue must be stopped before this
|
|
* function is called.
|
|
*
|
|
* @queue_id: Queue to shutdown
|
|
*
|
|
* Returns CVMX_CMD_QUEUE_SUCCESS or a failure code
|
|
*/
|
|
cvmx_cmd_queue_result_t cvmx_cmd_queue_shutdown(cvmx_cmd_queue_id_t queue_id)
|
|
{
|
|
__cvmx_cmd_queue_state_t *qptr = __cvmx_cmd_queue_get_state(queue_id);
|
|
if (qptr == NULL) {
|
|
cvmx_dprintf("ERROR: cvmx_cmd_queue_shutdown: Unable to "
|
|
"get queue information.\n");
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
}
|
|
|
|
if (cvmx_cmd_queue_length(queue_id) > 0) {
|
|
cvmx_dprintf("ERROR: cvmx_cmd_queue_shutdown: Queue still "
|
|
"has data in it.\n");
|
|
return CVMX_CMD_QUEUE_FULL;
|
|
}
|
|
|
|
__cvmx_cmd_queue_lock(queue_id, qptr);
|
|
if (qptr->base_ptr_div128) {
|
|
cvmx_fpa_free(cvmx_phys_to_ptr
|
|
((uint64_t) qptr->base_ptr_div128 << 7),
|
|
qptr->fpa_pool, 0);
|
|
qptr->base_ptr_div128 = 0;
|
|
}
|
|
__cvmx_cmd_queue_unlock(qptr);
|
|
|
|
return CVMX_CMD_QUEUE_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* Return the number of command words pending in the queue. This
|
|
* function may be relatively slow for some hardware units.
|
|
*
|
|
* @queue_id: Hardware command queue to query
|
|
*
|
|
* Returns Number of outstanding commands
|
|
*/
|
|
int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id)
|
|
{
|
|
if (CVMX_ENABLE_PARAMETER_CHECKING) {
|
|
if (__cvmx_cmd_queue_get_state(queue_id) == NULL)
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
}
|
|
|
|
/*
|
|
* The cast is here so gcc with check that all values in the
|
|
* cvmx_cmd_queue_id_t enumeration are here.
|
|
*/
|
|
switch ((cvmx_cmd_queue_id_t) (queue_id & 0xff0000)) {
|
|
case CVMX_CMD_QUEUE_PKO_BASE:
|
|
/*
|
|
* FIXME: Need atomic lock on
|
|
* CVMX_PKO_REG_READ_IDX. Right now we are normally
|
|
* called with the queue lock, so that is a SLIGHT
|
|
* amount of protection.
|
|
*/
|
|
cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue_id & 0xffff);
|
|
if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
|
|
union cvmx_pko_mem_debug9 debug9;
|
|
debug9.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG9);
|
|
return debug9.cn38xx.doorbell;
|
|
} else {
|
|
union cvmx_pko_mem_debug8 debug8;
|
|
debug8.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG8);
|
|
return debug8.cn50xx.doorbell;
|
|
}
|
|
case CVMX_CMD_QUEUE_ZIP:
|
|
case CVMX_CMD_QUEUE_DFA:
|
|
case CVMX_CMD_QUEUE_RAID:
|
|
/* FIXME: Implement other lengths */
|
|
return 0;
|
|
case CVMX_CMD_QUEUE_DMA_BASE:
|
|
{
|
|
union cvmx_npei_dmax_counts dmax_counts;
|
|
dmax_counts.u64 =
|
|
cvmx_read_csr(CVMX_PEXP_NPEI_DMAX_COUNTS
|
|
(queue_id & 0x7));
|
|
return dmax_counts.s.dbell;
|
|
}
|
|
case CVMX_CMD_QUEUE_END:
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
}
|
|
return CVMX_CMD_QUEUE_INVALID_PARAM;
|
|
}
|
|
|
|
/**
|
|
* Return the command buffer to be written to. The purpose of this
|
|
* function is to allow CVMX routine access t othe low level buffer
|
|
* for initial hardware setup. User applications should not call this
|
|
* function directly.
|
|
*
|
|
* @queue_id: Command queue to query
|
|
*
|
|
* Returns Command buffer or NULL on failure
|
|
*/
|
|
void *cvmx_cmd_queue_buffer(cvmx_cmd_queue_id_t queue_id)
|
|
{
|
|
__cvmx_cmd_queue_state_t *qptr = __cvmx_cmd_queue_get_state(queue_id);
|
|
if (qptr && qptr->base_ptr_div128)
|
|
return cvmx_phys_to_ptr((uint64_t) qptr->base_ptr_div128 << 7);
|
|
else
|
|
return NULL;
|
|
}
|