Changes in 4.9.283 ext4: fix race writing to an inline_data file while its xattrs are changing mtd: nand: atmel_nand: remove build warning in atmel_nand_remove() xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG qed: Fix the VF msix vectors flow qede: Fix memset corruption perf/x86/amd/ibs: Work around erratum #1197 cryptoloop: add a deprecation warning ARM: 8918/2: only build return_address() if needed ALSA: pcm: fix divide error in snd_pcm_lib_ioctl ath: Use safer key clearing with key cache entries ath9k: Clear key cache explicitly on disabling hardware ath: Export ath_hw_keysetmac() ath: Modify ath_key_delete() to not need full key entry ath9k: Postpone key cache entry deletion for TXQ frames reference it media: stkwebcam: fix memory leak in stk_camera_probe igmp: Add ip_mc_list lock in ip_check_mc_rcu usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled USB: serial: mos7720: improve OOM-handling in read_mos_reg() net/sched: cls_flower: Use mask for addr_type PM / wakeirq: Enable dedicated wakeirq for suspend tc358743: fix register i2c_rd/wr function fix nvme-pci: Fix an error handling path in 'nvme_probe()' gfs2: Don't clear SGID when inheriting ACLs ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2) s390/disassembler: correct disassembly lines alignment mm/kmemleak.c: make cond_resched() rate-limiting more efficient crypto: talitos - reduce max key size for SEC1 powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Delete unneeded .globl _zimage_start net: ll_temac: Remove left-over debug message mm/page_alloc: speed up the iteration of max_order Revert "btrfs: compression: don't try to compress if we don't have enough pages" x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions PCI: Call Max Payload Size-related fixup quirks early regmap: fix the offset of register error log crypto: mxs-dcp - Check for DMA mapping errors power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop() udf: Check LVID earlier power: supply: max17042_battery: fix typo in MAx17042_TOFF libata: fix ata_host_start() crypto: qat - do not ignore errors from enable_vf2pf_comms() crypto: qat - handle both source of interrupt in VF ISR crypto: qat - fix reuse of completion variable crypto: qat - fix naming for init/shutdown VF to PF notifications crypto: qat - do not export adf_iov_putmsg() udf_get_extendedattr() had no boundary checks. m68k: emu: Fix invalid free in nfeth_cleanup() spi: spi-pic32: Fix issue with uninitialized dma_slave_config crypto: qat - use proper type for vf_mask certs: Trigger creation of RSA module signing key if it's not an RSA key media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init media: dvb-usb: fix uninit-value in vp702x_read_mac_addr media: go7007: remove redundant initialization Bluetooth: sco: prevent information leak in sco_conn_defer_accept() tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos net: cipso: fix warnings in netlbl_cipsov4_add_std i2c: highlander: add IRQ check PCI: PM: Enable PME if it can be signaled from D3cold soc: qcom: smsm: Fix missed interrupts if state changes while masked Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7 Bluetooth: fix repeated calls to sco_sock_kill drm/msm/dsi: Fix some reference counted resource leaks usb: gadget: udc: at91: add IRQ check usb: phy: fsl-usb: add IRQ check usb: phy: twl6030: add IRQ checks Bluetooth: Move shutdown callback before flushing tx and rx queue usb: host: ohci-tmio: add IRQ check usb: phy: tahvo: add IRQ check usb: gadget: mv_u3d: request_irq() after initializing UDC Bluetooth: add timeout sanity check to hci_inquiry i2c: iop3xx: fix deferred probing i2c: s3c2410: fix IRQ check mmc: dw_mmc: Fix issue with uninitialized dma_slave_config mmc: moxart: Fix issue with uninitialized dma_slave_config CIFS: Fix a potencially linear read overflow i2c: mt65xx: fix IRQ check usb: ehci-orion: Handle errors of clk_prepare_enable() in probe ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point() bcma: Fix memory leak for internally-handled cores ipv4: make exception cache less predictible tty: Fix data race between tiocsti() and flush_to_ldisc() KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted IMA: remove -Wmissing-prototypes warning clk: kirkwood: Fix a clocking boot regression fbmem: don't allow too huge resolutions rtc: tps65910: Correct driver module alias PCI/MSI: Skip masking MSI-X on Xen PV powerpc/perf/hv-gpci: Fix counter value parsing xen: fix setting of max_pfn in shared_info crypto: public_key: fix overflow during implicit conversion power: supply: max17042: handle fails of reading status register VMCI: fix NULL pointer dereference when unmapping queue pair media: uvc: don't do DMA on stack media: rc-loopback: return number of emitters rather than error libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs ARM: 9105/1: atags_to_fdt: don't warn about stack size PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure vfio: Use config not menuconfig for VFIO_NOIOMMU openrisc: don't printk() unconditionally pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry() MIPS: Malta: fix alignment of the devicetree buffer crypto: mxs-dcp - Use sg_mapping_iter to copy data PCI: Use pci_update_current_state() in pci_enable_device_flags() iio: dac: ad5624r: Fix incorrect handling of an optional regulator. video: fbdev: kyro: fix a DoS bug by restricting user input netlink: Deal with ESRCH error in nlmsg_notify() Smack: Fix wrong semantics in smk_access_entry() usb: host: fotg210: fix the endpoint's transactional opportunities calculation usb: host: fotg210: fix the actual_length of an iso packet usb: gadget: u_ether: fix a potential null pointer dereference usb: gadget: composite: Allow bMaxPower=0 if self-powered staging: board: Fix uninitialized spinlock when attaching genpd tty: serial: jsm: hold port lock when reporting modem line changes bpf/tests: Fix copy-and-paste error in double word test bpf/tests: Do not PASS tests without actually testing the result video: fbdev: asiliantfb: Error out if 'pixclock' equals zero video: fbdev: kyro: Error out if 'pixclock' equals zero video: fbdev: riva: Error out if 'pixclock' equals zero ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs() flow_dissector: Fix out-of-bounds warnings s390/jump_label: print real address in a case of a jump label bug serial: 8250: Define RX trigger levels for OxSemi 950 devices xtensa: ISS: don't panic in rs_init hvsi: don't panic on tty_register_driver failure serial: 8250_pci: make setup_port() parameters explicitly unsigned staging: ks7010: Fix the initialization of the 'sleep_status' structure ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init() Bluetooth: skip invalid hci_sync_conn_complete_evt ASoC: Intel: bytcr_rt5640: Move "Platform Clock" routes to the maps for the matching in-/output net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe() Bluetooth: avoid circular locks in sco_sock_connect gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port() ARM: tegra: tamonten: Fix UART pad setting rpc: fix gss_svc_init cleanup on failure gfs2: Don't call dlm after protocol is unmounted mmc: rtsx_pci: Fix long reads when clock is prescaled cifs: fix wrong release in sess_alloc_buffer() failed path Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set" usbip: give back URBs for unsent unlink requests during cleanup parport: remove non-zero check on count ath9k: fix OOB read ar9300_eeprom_restore_internal ath9k: fix sleeping in atomic context net: fix NULL pointer reference in cipso_v4_doi_free net: w5100: check return value after calling platform_get_resource() parisc: fix crash with signals and alloca scsi: BusLogic: Fix missing pr_cont() use mm/hugetlb: initialize hugetlb_usage in mm_init memcg: enable accounting for pids in nested pid namespaces platform/chrome: cros_ec_proto: Send command again when timeout occurs xen: reset legacy rtc flag for PV domU bnx2x: Fix enabling network interfaces without VFs net-caif: avoid user-triggerable WARN_ON(1) ptp: dp83640: don't define PAGE0 dccp: don't duplicate ccid when cloning dccp sock net/l2tp: Fix reference count leak in l2tp_udp_recv_core r6040: Restore MDIO clock frequency after MAC reset tipc: increase timeout in tipc_sk_enqueue() events: Reuse value read using READ_ONCE instead of re-reading it net/af_unix: fix a data-race in unix_dgram_poll tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() x86/mm: Fix kern_addr_valid() to cope with existing but not present entries dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation mfd: Don't use irq_create_mapping() to resolve a mapping net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920 ethtool: Fix an error code in cxgb2.c PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()' ARC: export clear_user_page() for modules net: dsa: b53: Fix calculating number of switch ports qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom net: renesas: sh_eth: Fix freeing wrong tx descriptor s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant Linux 4.9.283 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I9e2017cce36805d71566ea1f265974a43bae33d1
601 lines
15 KiB
Plaintext
601 lines
15 KiB
Plaintext
/*
|
|
* SAMSUNG EXYNOS7 SoC device tree source
|
|
*
|
|
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/exynos7-clk.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
compatible = "samsung,exynos7";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
pinctrl0 = &pinctrl_alive;
|
|
pinctrl1 = &pinctrl_bus0;
|
|
pinctrl2 = &pinctrl_nfc;
|
|
pinctrl3 = &pinctrl_touch;
|
|
pinctrl4 = &pinctrl_ff;
|
|
pinctrl5 = &pinctrl_ese;
|
|
pinctrl6 = &pinctrl_fsys0;
|
|
pinctrl7 = &pinctrl_fsys1;
|
|
pinctrl8 = &pinctrl_bus1;
|
|
tmuctrl0 = &tmuctrl_0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57", "arm,armv8";
|
|
reg = <0x0>;
|
|
enable-method = "psci";
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57", "arm,armv8";
|
|
reg = <0x1>;
|
|
enable-method = "psci";
|
|
};
|
|
|
|
cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57", "arm,armv8";
|
|
reg = <0x2>;
|
|
enable-method = "psci";
|
|
};
|
|
|
|
cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57", "arm,armv8";
|
|
reg = <0x3>;
|
|
enable-method = "psci";
|
|
};
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci";
|
|
method = "smc";
|
|
cpu_off = <0x84000002>;
|
|
cpu_on = <0xC4000003>;
|
|
};
|
|
|
|
soc: soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0 0x18000000>;
|
|
|
|
chipid@10000000 {
|
|
compatible = "samsung,exynos4210-chipid";
|
|
reg = <0x10000000 0x100>;
|
|
};
|
|
|
|
fin_pll: xxti {
|
|
compatible = "fixed-clock";
|
|
clock-output-names = "fin_pll";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
gic: interrupt-controller@11001000 {
|
|
compatible = "arm,gic-400";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0x11001000 0x1000>,
|
|
<0x11002000 0x2000>,
|
|
<0x11004000 0x2000>,
|
|
<0x11006000 0x2000>;
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pdma0: pdma@10E10000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x10E10000 0x1000>;
|
|
interrupts = <0 225 0>;
|
|
clocks = <&clock_fsys0 ACLK_PDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
pdma1: pdma@10EB0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x10EB0000 0x1000>;
|
|
interrupts = <0 226 0>;
|
|
clocks = <&clock_fsys0 ACLK_PDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
};
|
|
|
|
clock_topc: clock-controller@10570000 {
|
|
compatible = "samsung,exynos7-clock-topc";
|
|
reg = <0x10570000 0x10000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
clock_top0: clock-controller@105d0000 {
|
|
compatible = "samsung,exynos7-clock-top0";
|
|
reg = <0x105d0000 0xb000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
|
|
<&clock_topc DOUT_SCLK_BUS1_PLL>,
|
|
<&clock_topc DOUT_SCLK_CC_PLL>,
|
|
<&clock_topc DOUT_SCLK_MFC_PLL>;
|
|
clock-names = "fin_pll", "dout_sclk_bus0_pll",
|
|
"dout_sclk_bus1_pll", "dout_sclk_cc_pll",
|
|
"dout_sclk_mfc_pll";
|
|
};
|
|
|
|
clock_top1: clock-controller@105e0000 {
|
|
compatible = "samsung,exynos7-clock-top1";
|
|
reg = <0x105e0000 0xb000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
|
|
<&clock_topc DOUT_SCLK_BUS1_PLL>,
|
|
<&clock_topc DOUT_SCLK_CC_PLL>,
|
|
<&clock_topc DOUT_SCLK_MFC_PLL>;
|
|
clock-names = "fin_pll", "dout_sclk_bus0_pll",
|
|
"dout_sclk_bus1_pll", "dout_sclk_cc_pll",
|
|
"dout_sclk_mfc_pll";
|
|
};
|
|
|
|
clock_ccore: clock-controller@105b0000 {
|
|
compatible = "samsung,exynos7-clock-ccore";
|
|
reg = <0x105b0000 0xd00>;
|
|
#clock-cells = <1>;
|
|
clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>;
|
|
clock-names = "fin_pll", "dout_aclk_ccore_133";
|
|
};
|
|
|
|
clock_peric0: clock-controller@13610000 {
|
|
compatible = "samsung,exynos7-clock-peric0";
|
|
reg = <0x13610000 0xd00>;
|
|
#clock-cells = <1>;
|
|
clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>,
|
|
<&clock_top0 CLK_SCLK_UART0>;
|
|
clock-names = "fin_pll", "dout_aclk_peric0_66",
|
|
"sclk_uart0";
|
|
};
|
|
|
|
clock_peric1: clock-controller@14c80000 {
|
|
compatible = "samsung,exynos7-clock-peric1";
|
|
reg = <0x14c80000 0xd00>;
|
|
#clock-cells = <1>;
|
|
clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>,
|
|
<&clock_top0 CLK_SCLK_UART1>,
|
|
<&clock_top0 CLK_SCLK_UART2>,
|
|
<&clock_top0 CLK_SCLK_UART3>;
|
|
clock-names = "fin_pll", "dout_aclk_peric1_66",
|
|
"sclk_uart1", "sclk_uart2", "sclk_uart3";
|
|
};
|
|
|
|
clock_peris: clock-controller@10040000 {
|
|
compatible = "samsung,exynos7-clock-peris";
|
|
reg = <0x10040000 0xd00>;
|
|
#clock-cells = <1>;
|
|
clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>;
|
|
clock-names = "fin_pll", "dout_aclk_peris_66";
|
|
};
|
|
|
|
clock_fsys0: clock-controller@10e90000 {
|
|
compatible = "samsung,exynos7-clock-fsys0";
|
|
reg = <0x10e90000 0xd00>;
|
|
#clock-cells = <1>;
|
|
clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>,
|
|
<&clock_top1 DOUT_SCLK_MMC2>;
|
|
clock-names = "fin_pll", "dout_aclk_fsys0_200",
|
|
"dout_sclk_mmc2";
|
|
};
|
|
|
|
clock_fsys1: clock-controller@156e0000 {
|
|
compatible = "samsung,exynos7-clock-fsys1";
|
|
reg = <0x156e0000 0xd00>;
|
|
#clock-cells = <1>;
|
|
clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
|
|
<&clock_top1 DOUT_SCLK_MMC0>,
|
|
<&clock_top1 DOUT_SCLK_MMC1>;
|
|
clock-names = "fin_pll", "dout_aclk_fsys1_200",
|
|
"dout_sclk_mmc0", "dout_sclk_mmc1";
|
|
};
|
|
|
|
serial_0: serial@13630000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x13630000 0x100>;
|
|
interrupts = <0 440 0>;
|
|
clocks = <&clock_peric0 PCLK_UART0>,
|
|
<&clock_peric0 SCLK_UART0>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
status = "disabled";
|
|
};
|
|
|
|
serial_1: serial@14c20000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x14c20000 0x100>;
|
|
interrupts = <0 456 0>;
|
|
clocks = <&clock_peric1 PCLK_UART1>,
|
|
<&clock_peric1 SCLK_UART1>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
status = "disabled";
|
|
};
|
|
|
|
serial_2: serial@14c30000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x14c30000 0x100>;
|
|
interrupts = <0 457 0>;
|
|
clocks = <&clock_peric1 PCLK_UART2>,
|
|
<&clock_peric1 SCLK_UART2>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
status = "disabled";
|
|
};
|
|
|
|
serial_3: serial@14c40000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x14c40000 0x100>;
|
|
interrupts = <0 458 0>;
|
|
clocks = <&clock_peric1 PCLK_UART3>,
|
|
<&clock_peric1 SCLK_UART3>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl_alive: pinctrl@10580000 {
|
|
compatible = "samsung,exynos7-pinctrl";
|
|
reg = <0x10580000 0x1000>;
|
|
|
|
wakeup-interrupt-controller {
|
|
compatible = "samsung,exynos7-wakeup-eint";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 16 0>;
|
|
};
|
|
};
|
|
|
|
pinctrl_bus0: pinctrl@13470000 {
|
|
compatible = "samsung,exynos7-pinctrl";
|
|
reg = <0x13470000 0x1000>;
|
|
interrupts = <0 383 0>;
|
|
};
|
|
|
|
pinctrl_nfc: pinctrl@14cd0000 {
|
|
compatible = "samsung,exynos7-pinctrl";
|
|
reg = <0x14cd0000 0x1000>;
|
|
interrupts = <0 473 0>;
|
|
};
|
|
|
|
pinctrl_touch: pinctrl@14ce0000 {
|
|
compatible = "samsung,exynos7-pinctrl";
|
|
reg = <0x14ce0000 0x1000>;
|
|
interrupts = <0 474 0>;
|
|
};
|
|
|
|
pinctrl_ff: pinctrl@14c90000 {
|
|
compatible = "samsung,exynos7-pinctrl";
|
|
reg = <0x14c90000 0x1000>;
|
|
interrupts = <0 475 0>;
|
|
};
|
|
|
|
pinctrl_ese: pinctrl@14ca0000 {
|
|
compatible = "samsung,exynos7-pinctrl";
|
|
reg = <0x14ca0000 0x1000>;
|
|
interrupts = <0 476 0>;
|
|
};
|
|
|
|
pinctrl_fsys0: pinctrl@10e60000 {
|
|
compatible = "samsung,exynos7-pinctrl";
|
|
reg = <0x10e60000 0x1000>;
|
|
interrupts = <0 221 0>;
|
|
};
|
|
|
|
pinctrl_fsys1: pinctrl@15690000 {
|
|
compatible = "samsung,exynos7-pinctrl";
|
|
reg = <0x15690000 0x1000>;
|
|
interrupts = <0 203 0>;
|
|
};
|
|
|
|
pinctrl_bus1: pinctrl@14870000 {
|
|
compatible = "samsung,exynos7-pinctrl";
|
|
reg = <0x14870000 0x1000>;
|
|
interrupts = <0 384 0>;
|
|
};
|
|
|
|
hsi2c_0: hsi2c@13640000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x13640000 0x1000>;
|
|
interrupts = <0 441 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c0_bus>;
|
|
clocks = <&clock_peric0 PCLK_HSI2C0>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_1: hsi2c@13650000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x13650000 0x1000>;
|
|
interrupts = <0 442 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c1_bus>;
|
|
clocks = <&clock_peric0 PCLK_HSI2C1>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_2: hsi2c@14e60000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x14e60000 0x1000>;
|
|
interrupts = <0 459 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c2_bus>;
|
|
clocks = <&clock_peric1 PCLK_HSI2C2>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_3: hsi2c@14e70000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x14e70000 0x1000>;
|
|
interrupts = <0 460 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c3_bus>;
|
|
clocks = <&clock_peric1 PCLK_HSI2C3>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_4: hsi2c@13660000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x13660000 0x1000>;
|
|
interrupts = <0 443 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c4_bus>;
|
|
clocks = <&clock_peric0 PCLK_HSI2C4>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_5: hsi2c@13670000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x13670000 0x1000>;
|
|
interrupts = <0 444 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c5_bus>;
|
|
clocks = <&clock_peric0 PCLK_HSI2C5>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_6: hsi2c@14e00000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x14e00000 0x1000>;
|
|
interrupts = <0 461 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c6_bus>;
|
|
clocks = <&clock_peric1 PCLK_HSI2C6>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_7: hsi2c@13e10000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x13e10000 0x1000>;
|
|
interrupts = <0 462 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c7_bus>;
|
|
clocks = <&clock_peric1 PCLK_HSI2C7>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_8: hsi2c@14e20000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x14e20000 0x1000>;
|
|
interrupts = <0 463 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c8_bus>;
|
|
clocks = <&clock_peric1 PCLK_HSI2C8>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_9: hsi2c@13680000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x13680000 0x1000>;
|
|
interrupts = <0 445 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c9_bus>;
|
|
clocks = <&clock_peric0 PCLK_HSI2C9>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_10: hsi2c@13690000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x13690000 0x1000>;
|
|
interrupts = <0 446 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c10_bus>;
|
|
clocks = <&clock_peric0 PCLK_HSI2C10>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_11: hsi2c@136a0000 {
|
|
compatible = "samsung,exynos7-hsi2c";
|
|
reg = <0x136a0000 0x1000>;
|
|
interrupts = <0 447 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hs_i2c11_bus>;
|
|
clocks = <&clock_peric0 PCLK_HSI2C11>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13
|
|
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14
|
|
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11
|
|
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10
|
|
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
pmu_system_controller: system-controller@105c0000 {
|
|
compatible = "samsung,exynos7-pmu", "syscon";
|
|
reg = <0x105c0000 0x5000>;
|
|
};
|
|
|
|
reboot: syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&pmu_system_controller>;
|
|
offset = <0x0400>;
|
|
mask = <0x1>;
|
|
};
|
|
|
|
rtc: rtc@10590000 {
|
|
compatible = "samsung,s3c6410-rtc";
|
|
reg = <0x10590000 0x100>;
|
|
interrupts = <0 355 0>, <0 356 0>;
|
|
clocks = <&clock_ccore PCLK_RTC>;
|
|
clock-names = "rtc";
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog: watchdog@101d0000 {
|
|
compatible = "samsung,exynos7-wdt";
|
|
reg = <0x101d0000 0x100>;
|
|
interrupts = <0 110 0>;
|
|
clocks = <&clock_peris PCLK_WDT>;
|
|
clock-names = "watchdog";
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_0: mmc@15740000 {
|
|
compatible = "samsung,exynos7-dw-mshc-smu";
|
|
interrupts = <0 201 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x15740000 0x2000>;
|
|
clocks = <&clock_fsys1 ACLK_MMC0>,
|
|
<&clock_top1 CLK_SCLK_MMC0>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_1: mmc@15750000 {
|
|
compatible = "samsung,exynos7-dw-mshc";
|
|
interrupts = <0 202 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x15750000 0x2000>;
|
|
clocks = <&clock_fsys1 ACLK_MMC1>,
|
|
<&clock_top1 CLK_SCLK_MMC1>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_2: mmc@15560000 {
|
|
compatible = "samsung,exynos7-dw-mshc-smu";
|
|
interrupts = <0 216 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x15560000 0x2000>;
|
|
clocks = <&clock_fsys0 ACLK_MMC2>,
|
|
<&clock_top1 CLK_SCLK_MMC2>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
adc: adc@13620000 {
|
|
compatible = "samsung,exynos7-adc";
|
|
reg = <0x13620000 0x100>;
|
|
interrupts = <0 448 0>;
|
|
clocks = <&clock_peric0 PCLK_ADCIF>;
|
|
clock-names = "adc";
|
|
#io-channel-cells = <1>;
|
|
io-channel-ranges;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@136c0000 {
|
|
compatible = "samsung,exynos4210-pwm";
|
|
reg = <0x136c0000 0x100>;
|
|
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
|
|
#pwm-cells = <3>;
|
|
clocks = <&clock_peric0 PCLK_PWM>;
|
|
clock-names = "timers";
|
|
};
|
|
|
|
tmuctrl_0: tmu@10060000 {
|
|
compatible = "samsung,exynos7-tmu";
|
|
reg = <0x10060000 0x200>;
|
|
interrupts = <0 108 0>;
|
|
clocks = <&clock_peris PCLK_TMU>,
|
|
<&clock_peris SCLK_TMU>;
|
|
clock-names = "tmu_apbif", "tmu_sclk";
|
|
#include "exynos7-tmu-sensor-conf.dtsi"
|
|
};
|
|
|
|
thermal-zones {
|
|
atlas_thermal: cluster0-thermal {
|
|
polling-delay-passive = <0>; /* milliseconds */
|
|
polling-delay = <0>; /* milliseconds */
|
|
thermal-sensors = <&tmuctrl_0>;
|
|
#include "exynos7-trip-points.dtsi"
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "exynos7-pinctrl.dtsi"
|