Changes in 4.9.156 drm/bufs: Fix Spectre v1 vulnerability staging: iio: adc: ad7280a: handle error from __ad7280_read32() ASoC: Intel: mrfld: fix uninitialized variable access gpu: ipu-v3: image-convert: Prevent race between run and unprepare ath9k: dynack: use authentication messages for 'late' ack scsi: lpfc: Correct LCB RJT handling ARM: 8808/1: kexec:offline panic_smp_self_stop CPU dlm: Don't swamp the CPU with callbacks queued during recovery x86/PCI: Fix Broadcom CNB20LE unintended sign extension (redux) powerpc/pseries: add of_node_put() in dlpar_detach_node() drm/vc4: ->x_scaling[1] should never be set to VC4_SCALING_NONE serial: fsl_lpuart: clear parity enable bit when disable parity ptp: check gettime64 return code in PTP_SYS_OFFSET ioctl staging:iio:ad2s90: Make probe handle spi_setup failure staging: iio: ad7780: update voltage on read ARM: OMAP2+: hwmod: Fix some section annotations modpost: validate symbol names also in find_elf_symbol perf tools: Add Hygon Dhyana support soc/tegra: Don't leak device tree node reference media: mtk-vcodec: Release device nodes in mtk_vcodec_init_enc_pm() dmaengine: xilinx_dma: Remove __aligned attribute on zynqmp_dma_desc_ll iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID media: adv*/tc358743/ths8200: fill in min width/height/pixelclock f2fs: move dir data flush to write checkpoint process f2fs: fix wrong return value of f2fs_acl_create sunvdc: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN soc: bcm: brcmstb: Don't leak device tree node reference nfsd4: fix crash on writing v4_end_grace before nfsd startup Thermal: do not clear passive state during system sleep firmware/efi: Add NULL pointer checks in efivars API functions arm64: ftrace: don't adjust the LR value ARM: dts: mmp2: fix TWSI2 x86/fpu: Add might_fault() to user_insn() media: DaVinci-VPBE: fix error handling in vpbe_initialize() smack: fix access permissions for keyring usb: hub: delay hub autosuspend if USB3 port is still link training timekeeping: Use proper seqcount initializer clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks iommu/amd: Fix amd_iommu=force_isolation ARM: dts: Fix OMAP4430 SDP Ethernet startup mips: bpf: fix encoding bug for mm_srlv32_op iommu/arm-smmu: Add support for qcom,smmu-v2 variant iommu/arm-smmu-v3: Use explicit mb() when moving cons pointer sata_rcar: fix deferred probing clk: imx6sl: ensure MMDC CH0 handshake is bypassed cpuidle: big.LITTLE: fix refcount leak i2c-axxia: check for error conditions first udf: Fix BUG on corrupted inode ARM: pxa: avoid section mismatch warning ASoC: fsl: Fix SND_SOC_EUKREA_TLV320 build error on i.MX8M memstick: Prevent memstick host from getting runtime suspended during card detection tty: serial: samsung: Properly set flags in autoCTS mode perf header: Fix unchecked usage of strncpy() perf probe: Fix unchecked usage of strncpy() arm64: KVM: Skip MMIO insn after emulation powerpc/uaccess: fix warning/error with access_ok() mac80211: fix radiotap vendor presence bitmap handling xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spi Bluetooth: Fix unnecessary error message for HCI request completion scsi: smartpqi: correct host serial num for ssa scsi: smartpqi: correct volume status cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan() drbd: narrow rcu_read_lock in drbd_sync_handshake drbd: disconnect, if the wrong UUIDs are attached on a connected peer drbd: skip spurious timeout (ping-timeo) when failing promote drbd: Avoid Clang warning about pointless switch statment video: clps711x-fb: release disp device node in probe() fbdev: fbmem: behave better with small rotated displays and many CPUs i40e: define proper net_device::neigh_priv_len igb: Fix an issue that PME is not enabled during runtime suspend fbdev: fbcon: Fix unregister crash when more than one framebuffer pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins KVM: x86: svm: report MSR_IA32_MCG_EXT_CTL as unsupported NFS: nfs_compare_mount_options always compare auth flavors. hwmon: (lm80) fix a missing check of the status of SMBus read hwmon: (lm80) fix a missing check of bus read in lm80 probe seq_buf: Make seq_buf_puts() null-terminate the buffer crypto: ux500 - Use proper enum in cryp_set_dma_transfer crypto: ux500 - Use proper enum in hash_set_dma_transfer MIPS: ralink: Select CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8 cifs: check ntwrk_buf_start for NULL before dereferencing it um: Avoid marking pages with "changed protection" niu: fix missing checks of niu_pci_eeprom_read f2fs: fix sbi->extent_list corruption issue scripts/decode_stacktrace: only strip base path when a prefix of the path ocfs2: don't clear bh uptodate for block read isdn: hisax: hfc_pci: Fix a possible concurrency use-after-free bug in HFCPCI_l1hw() gdrom: fix a memory leak bug fsl/fman: Use GFP_ATOMIC in {memac,tgec}_add_hash_mac_address() block/swim3: Fix -EBUSY error when re-opening device after unmount thermal: generic-adc: Fix adc to temp interpolation HID: lenovo: Add checks to fix of_led_classdev_register kernel/hung_task.c: break RCU locks based on jiffies proc/sysctl: fix return error for proc_doulongvec_minmax() fs/epoll: drop ovflist branch prediction exec: load_script: don't blindly truncate shebang string thermal: hwmon: inline helpers when CONFIG_THERMAL_HWMON is not set dccp: fool proof ccid_hc_[rt]x_parse_options() net: dp83640: expire old TX-skb rxrpc: bad unlock balance in rxrpc_recvmsg skge: potential memory corruption in skge_get_regs() rds: fix refcount bug in rds_sock_addref net: systemport: Fix WoL with password after deep sleep net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames net: dsa: slave: Don't propagate flag changes on down slave interfaces enic: fix checksum validation for IPv6 ALSA: compress: Fix stop handling on compressed capture streams ALSA: hda - Serialize codec registrations fuse: call pipe_buf_release() under pipe lock fuse: decrement NR_WRITEBACK_TEMP on the right page fuse: handle zero sized retrieve correctly dmaengine: bcm2835: Fix interrupt race on RT dmaengine: bcm2835: Fix abort of transactions dmaengine: imx-dma: fix wrong callback invoke usb: phy: am335x: fix race condition in _probe usb: gadget: udc: net2272: Fix bitwise and boolean operations usb: gadget: musb: fix short isoc packets with inventra dma scsi: aic94xx: fix module loading KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222) kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974) KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221) perf/x86/intel/uncore: Add Node ID mask x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out() perf/core: Don't WARN() for impossible ring-buffer sizes perf tests evsel-tp-sched: Fix bitwise operator serial: fix race between flush_to_ldisc and tty_open oom, oom_reaper: do not enqueue same task twice PCI: vmd: Free up IRQs on suspend path IB/hfi1: Add limit test for RC/UC send via loopback perf/x86/intel: Delay memory deallocation until x86_pmu_dead_cpu() ath9k: dynack: make ewma estimation faster ath9k: dynack: check da->enabled first in sampling routines Linux 4.9.156 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
869 lines
19 KiB
C
869 lines
19 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/cm-x300.c
|
|
*
|
|
* Support for the CompuLab CM-X300 modules
|
|
*
|
|
* Copyright (C) 2008,2009 CompuLab Ltd.
|
|
*
|
|
* Mike Rapoport <mike@compulab.co.il>
|
|
* Igor Grinberg <grinberg@compulab.co.il>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#define pr_fmt(fmt) "%s: " fmt, __func__
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/dm9000.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/platform_data/rtc-v3020.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/pwm_backlight.h>
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_data/pca953x.h>
|
|
#include <linux/i2c/pxa-i2c.h>
|
|
|
|
#include <linux/mfd/da903x.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/apm-emulation.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_gpio.h>
|
|
#include <linux/spi/tdo24m.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/system_info.h>
|
|
|
|
#include "pxa300.h"
|
|
#include "pxa27x-udc.h"
|
|
#include <linux/platform_data/video-pxafb.h>
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include <linux/platform_data/usb-ohci-pxa27x.h>
|
|
#include <linux/platform_data/mtd-nand-pxa3xx.h>
|
|
#include <mach/audio.h>
|
|
#include <linux/platform_data/usb-pxa3xx-ulpi.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
#define CM_X300_ETH_PHYS 0x08000010
|
|
|
|
#define GPIO82_MMC_IRQ (82)
|
|
#define GPIO85_MMC_WP (85)
|
|
|
|
#define CM_X300_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
|
|
|
|
#define GPIO95_RTC_CS (95)
|
|
#define GPIO96_RTC_WR (96)
|
|
#define GPIO97_RTC_RD (97)
|
|
#define GPIO98_RTC_IO (98)
|
|
|
|
#define GPIO_ULPI_PHY_RST (127)
|
|
|
|
static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
|
|
/* LCD */
|
|
GPIO54_LCD_LDD_0,
|
|
GPIO55_LCD_LDD_1,
|
|
GPIO56_LCD_LDD_2,
|
|
GPIO57_LCD_LDD_3,
|
|
GPIO58_LCD_LDD_4,
|
|
GPIO59_LCD_LDD_5,
|
|
GPIO60_LCD_LDD_6,
|
|
GPIO61_LCD_LDD_7,
|
|
GPIO62_LCD_LDD_8,
|
|
GPIO63_LCD_LDD_9,
|
|
GPIO64_LCD_LDD_10,
|
|
GPIO65_LCD_LDD_11,
|
|
GPIO66_LCD_LDD_12,
|
|
GPIO67_LCD_LDD_13,
|
|
GPIO68_LCD_LDD_14,
|
|
GPIO69_LCD_LDD_15,
|
|
GPIO72_LCD_FCLK,
|
|
GPIO73_LCD_LCLK,
|
|
GPIO74_LCD_PCLK,
|
|
GPIO75_LCD_BIAS,
|
|
|
|
/* BTUART */
|
|
GPIO111_UART2_RTS,
|
|
GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
|
|
GPIO113_UART2_TXD,
|
|
GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
|
|
|
|
/* STUART */
|
|
GPIO109_UART3_TXD,
|
|
GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
|
|
|
|
/* AC97 */
|
|
GPIO23_AC97_nACRESET,
|
|
GPIO24_AC97_SYSCLK,
|
|
GPIO29_AC97_BITCLK,
|
|
GPIO25_AC97_SDATA_IN_0,
|
|
GPIO27_AC97_SDATA_OUT,
|
|
GPIO28_AC97_SYNC,
|
|
|
|
/* Keypad */
|
|
GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
|
|
GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
|
|
GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
|
|
GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
|
|
GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
|
|
GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
|
|
GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
|
|
GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
|
|
GPIO121_KP_MKOUT_0,
|
|
GPIO122_KP_MKOUT_1,
|
|
GPIO123_KP_MKOUT_2,
|
|
GPIO124_KP_MKOUT_3,
|
|
GPIO125_KP_MKOUT_4,
|
|
GPIO4_2_KP_MKOUT_5,
|
|
|
|
/* MMC1 */
|
|
GPIO3_MMC1_DAT0,
|
|
GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
|
|
GPIO5_MMC1_DAT2,
|
|
GPIO6_MMC1_DAT3,
|
|
GPIO7_MMC1_CLK,
|
|
GPIO8_MMC1_CMD, /* CMD0 for slot 0 */
|
|
|
|
/* MMC2 */
|
|
GPIO9_MMC2_DAT0,
|
|
GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
|
|
GPIO11_MMC2_DAT2,
|
|
GPIO12_MMC2_DAT3,
|
|
GPIO13_MMC2_CLK,
|
|
GPIO14_MMC2_CMD,
|
|
|
|
/* FFUART */
|
|
GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
|
|
GPIO31_UART1_TXD,
|
|
GPIO32_UART1_CTS,
|
|
GPIO37_UART1_RTS,
|
|
GPIO33_UART1_DCD,
|
|
GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
|
|
GPIO35_UART1_RI,
|
|
GPIO36_UART1_DTR,
|
|
|
|
/* GPIOs */
|
|
GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
|
|
GPIO85_GPIO, /* MMC WP */
|
|
GPIO99_GPIO, /* Ethernet IRQ */
|
|
|
|
/* RTC GPIOs */
|
|
GPIO95_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC CS */
|
|
GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC WR */
|
|
GPIO97_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC RD */
|
|
GPIO98_GPIO, /* RTC IO */
|
|
|
|
/* Standard I2C */
|
|
GPIO21_I2C_SCL,
|
|
GPIO22_I2C_SDA,
|
|
|
|
/* PWM Backlight */
|
|
GPIO19_PWM2_OUT,
|
|
};
|
|
|
|
static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
|
|
/* GPIOs */
|
|
GPIO79_GPIO, /* LED */
|
|
GPIO77_GPIO, /* WiFi reset */
|
|
GPIO78_GPIO, /* BT reset */
|
|
};
|
|
|
|
static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
|
|
/* GPIOs */
|
|
GPIO76_GPIO, /* LED */
|
|
GPIO71_GPIO, /* WiFi reset */
|
|
GPIO70_GPIO, /* BT reset */
|
|
};
|
|
|
|
static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
|
|
/* USB PORT 2 */
|
|
ULPI_STP,
|
|
ULPI_NXT,
|
|
ULPI_DIR,
|
|
GPIO30_ULPI_DATA_OUT_0,
|
|
GPIO31_ULPI_DATA_OUT_1,
|
|
GPIO32_ULPI_DATA_OUT_2,
|
|
GPIO33_ULPI_DATA_OUT_3,
|
|
GPIO34_ULPI_DATA_OUT_4,
|
|
GPIO35_ULPI_DATA_OUT_5,
|
|
GPIO36_ULPI_DATA_OUT_6,
|
|
GPIO37_ULPI_DATA_OUT_7,
|
|
GPIO38_ULPI_CLK,
|
|
/* external PHY reset pin */
|
|
GPIO127_GPIO,
|
|
|
|
/* USB PORT 3 */
|
|
GPIO77_USB_P3_1,
|
|
GPIO78_USB_P3_2,
|
|
GPIO79_USB_P3_3,
|
|
GPIO80_USB_P3_4,
|
|
GPIO81_USB_P3_5,
|
|
GPIO82_USB_P3_6,
|
|
GPIO0_2_USBH_PEN,
|
|
};
|
|
|
|
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
|
|
static struct resource dm9000_resources[] = {
|
|
[0] = {
|
|
.start = CM_X300_ETH_PHYS,
|
|
.end = CM_X300_ETH_PHYS + 0x3,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = CM_X300_ETH_PHYS + 0x4,
|
|
.end = CM_X300_ETH_PHYS + 0x4 + 500,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
|
|
.end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
}
|
|
};
|
|
|
|
static struct dm9000_plat_data cm_x300_dm9000_platdata = {
|
|
.flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
|
|
};
|
|
|
|
static struct platform_device dm9000_device = {
|
|
.name = "dm9000",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(dm9000_resources),
|
|
.resource = dm9000_resources,
|
|
.dev = {
|
|
.platform_data = &cm_x300_dm9000_platdata,
|
|
}
|
|
|
|
};
|
|
|
|
static void __init cm_x300_init_dm9000(void)
|
|
{
|
|
platform_device_register(&dm9000_device);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_dm9000(void) {}
|
|
#endif
|
|
|
|
/* LCD */
|
|
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
|
static struct pxafb_mode_info cm_x300_lcd_modes[] = {
|
|
[0] = {
|
|
.pixclock = 38250,
|
|
.bpp = 16,
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.hsync_len = 8,
|
|
.vsync_len = 2,
|
|
.left_margin = 8,
|
|
.upper_margin = 2,
|
|
.right_margin = 24,
|
|
.lower_margin = 4,
|
|
.cmap_greyscale = 0,
|
|
},
|
|
[1] = {
|
|
.pixclock = 153800,
|
|
.bpp = 16,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.hsync_len = 8,
|
|
.vsync_len = 2,
|
|
.left_margin = 8,
|
|
.upper_margin = 2,
|
|
.right_margin = 88,
|
|
.lower_margin = 2,
|
|
.cmap_greyscale = 0,
|
|
},
|
|
};
|
|
|
|
static struct pxafb_mach_info cm_x300_lcd = {
|
|
.modes = cm_x300_lcd_modes,
|
|
.num_modes = ARRAY_SIZE(cm_x300_lcd_modes),
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
|
};
|
|
|
|
static void __init cm_x300_init_lcd(void)
|
|
{
|
|
pxa_set_fb_info(NULL, &cm_x300_lcd);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_lcd(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
|
|
static struct pwm_lookup cm_x300_pwm_lookup[] = {
|
|
PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
|
|
PWM_POLARITY_NORMAL),
|
|
};
|
|
|
|
static struct platform_pwm_backlight_data cm_x300_backlight_data = {
|
|
.max_brightness = 100,
|
|
.dft_brightness = 100,
|
|
.enable_gpio = -1,
|
|
};
|
|
|
|
static struct platform_device cm_x300_backlight_device = {
|
|
.name = "pwm-backlight",
|
|
.dev = {
|
|
.parent = &pxa27x_device_pwm0.dev,
|
|
.platform_data = &cm_x300_backlight_data,
|
|
},
|
|
};
|
|
|
|
static void cm_x300_init_bl(void)
|
|
{
|
|
pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
|
|
platform_device_register(&cm_x300_backlight_device);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_bl(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
|
|
#define GPIO_LCD_BASE (144)
|
|
#define GPIO_LCD_DIN (GPIO_LCD_BASE + 8) /* aux_gpio3_0 */
|
|
#define GPIO_LCD_DOUT (GPIO_LCD_BASE + 9) /* aux_gpio3_1 */
|
|
#define GPIO_LCD_SCL (GPIO_LCD_BASE + 10) /* aux_gpio3_2 */
|
|
#define GPIO_LCD_CS (GPIO_LCD_BASE + 11) /* aux_gpio3_3 */
|
|
#define LCD_SPI_BUS_NUM (1)
|
|
|
|
static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
|
|
.sck = GPIO_LCD_SCL,
|
|
.mosi = GPIO_LCD_DIN,
|
|
.miso = GPIO_LCD_DOUT,
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static struct platform_device cm_x300_spi_gpio = {
|
|
.name = "spi_gpio",
|
|
.id = LCD_SPI_BUS_NUM,
|
|
.dev = {
|
|
.platform_data = &cm_x300_spi_gpio_pdata,
|
|
},
|
|
};
|
|
|
|
static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
|
|
.model = TDO35S,
|
|
};
|
|
|
|
static struct spi_board_info cm_x300_spi_devices[] __initdata = {
|
|
{
|
|
.modalias = "tdo24m",
|
|
.max_speed_hz = 1000000,
|
|
.bus_num = LCD_SPI_BUS_NUM,
|
|
.chip_select = 0,
|
|
.controller_data = (void *) GPIO_LCD_CS,
|
|
.platform_data = &cm_x300_tdo24m_pdata,
|
|
},
|
|
};
|
|
|
|
static void __init cm_x300_init_spi(void)
|
|
{
|
|
spi_register_board_info(cm_x300_spi_devices,
|
|
ARRAY_SIZE(cm_x300_spi_devices));
|
|
platform_device_register(&cm_x300_spi_gpio);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_spi(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
|
|
static void __init cm_x300_init_ac97(void)
|
|
{
|
|
pxa_set_ac97_info(NULL);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_ac97(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
|
|
static struct mtd_partition cm_x300_nand_partitions[] = {
|
|
[0] = {
|
|
.name = "OBM",
|
|
.offset = 0,
|
|
.size = SZ_256K,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
[1] = {
|
|
.name = "U-Boot",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_256K,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
[2] = {
|
|
.name = "Environment",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_256K,
|
|
},
|
|
[3] = {
|
|
.name = "reserved",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_256K + SZ_1M,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
[4] = {
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_4M,
|
|
},
|
|
[5] = {
|
|
.name = "fs",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
|
|
.enable_arbiter = 1,
|
|
.keep_config = 1,
|
|
.num_cs = 1,
|
|
.parts[0] = cm_x300_nand_partitions,
|
|
.nr_parts[0] = ARRAY_SIZE(cm_x300_nand_partitions),
|
|
};
|
|
|
|
static void __init cm_x300_init_nand(void)
|
|
{
|
|
pxa3xx_set_nand_info(&cm_x300_nand_info);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_nand(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
|
|
static struct pxamci_platform_data cm_x300_mci_platform_data = {
|
|
.detect_delay_ms = 200,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.gpio_card_detect = GPIO82_MMC_IRQ,
|
|
.gpio_card_ro = GPIO85_MMC_WP,
|
|
.gpio_power = -1,
|
|
};
|
|
|
|
/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
|
|
no detection/ro pins */
|
|
static int cm_x300_mci2_init(struct device *dev,
|
|
irq_handler_t cm_x300_detect_int,
|
|
void *data)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void cm_x300_mci2_exit(struct device *dev, void *data)
|
|
{
|
|
}
|
|
|
|
static struct pxamci_platform_data cm_x300_mci2_platform_data = {
|
|
.detect_delay_ms = 200,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.init = cm_x300_mci2_init,
|
|
.exit = cm_x300_mci2_exit,
|
|
.gpio_card_detect = -1,
|
|
.gpio_card_ro = -1,
|
|
.gpio_power = -1,
|
|
};
|
|
|
|
static void __init cm_x300_init_mmc(void)
|
|
{
|
|
pxa_set_mci_info(&cm_x300_mci_platform_data);
|
|
pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_mmc(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_PXA310_ULPI)
|
|
static struct clk *pout_clk;
|
|
|
|
static int cm_x300_ulpi_phy_reset(void)
|
|
{
|
|
int err;
|
|
|
|
/* reset the PHY */
|
|
err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
|
|
"ulpi reset");
|
|
if (err) {
|
|
pr_err("failed to request ULPI reset GPIO: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
msleep(10);
|
|
gpio_set_value(GPIO_ULPI_PHY_RST, 1);
|
|
msleep(10);
|
|
|
|
gpio_free(GPIO_ULPI_PHY_RST);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int cm_x300_u2d_init(struct device *dev)
|
|
{
|
|
int err = 0;
|
|
|
|
if (cpu_is_pxa310()) {
|
|
/* CLK_POUT is connected to the ULPI PHY */
|
|
pout_clk = clk_get(NULL, "CLK_POUT");
|
|
if (IS_ERR(pout_clk)) {
|
|
err = PTR_ERR(pout_clk);
|
|
pr_err("failed to get CLK_POUT: %d\n", err);
|
|
return err;
|
|
}
|
|
clk_enable(pout_clk);
|
|
|
|
err = cm_x300_ulpi_phy_reset();
|
|
if (err) {
|
|
clk_disable(pout_clk);
|
|
clk_put(pout_clk);
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void cm_x300_u2d_exit(struct device *dev)
|
|
{
|
|
if (cpu_is_pxa310()) {
|
|
clk_disable(pout_clk);
|
|
clk_put(pout_clk);
|
|
}
|
|
}
|
|
|
|
static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
|
|
.ulpi_mode = ULPI_SER_6PIN,
|
|
.init = cm_x300_u2d_init,
|
|
.exit = cm_x300_u2d_exit,
|
|
};
|
|
|
|
static void __init cm_x300_init_u2d(void)
|
|
{
|
|
pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_u2d(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
static int cm_x300_ohci_init(struct device *dev)
|
|
{
|
|
if (cpu_is_pxa300())
|
|
UP2OCR = UP2OCR_HXS
|
|
| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW,
|
|
.init = cm_x300_ohci_init,
|
|
};
|
|
|
|
static void __init cm_x300_init_ohci(void)
|
|
{
|
|
pxa_set_ohci_info(&cm_x300_ohci_platform_data);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_ohci(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
|
|
static struct gpio_led cm_x300_leds[] = {
|
|
[0] = {
|
|
.name = "cm-x300:green",
|
|
.default_trigger = "heartbeat",
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
|
|
.num_leds = ARRAY_SIZE(cm_x300_leds),
|
|
.leds = cm_x300_leds,
|
|
};
|
|
|
|
static struct platform_device cm_x300_led_device = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &cm_x300_gpio_led_pdata,
|
|
},
|
|
};
|
|
|
|
static void __init cm_x300_init_leds(void)
|
|
{
|
|
if (system_rev < 130)
|
|
cm_x300_leds[0].gpio = 79;
|
|
else
|
|
cm_x300_leds[0].gpio = 76;
|
|
|
|
platform_device_register(&cm_x300_led_device);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_leds(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
/* PCA9555 */
|
|
static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
|
|
.gpio_base = 128,
|
|
};
|
|
|
|
static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
|
|
.gpio_base = 144,
|
|
};
|
|
|
|
static struct i2c_board_info cm_x300_gpio_ext_info[] = {
|
|
[0] = {
|
|
I2C_BOARD_INFO("pca9555", 0x24),
|
|
.platform_data = &cm_x300_gpio_ext_pdata_0,
|
|
},
|
|
[1] = {
|
|
I2C_BOARD_INFO("pca9555", 0x25),
|
|
.platform_data = &cm_x300_gpio_ext_pdata_1,
|
|
},
|
|
};
|
|
|
|
static void __init cm_x300_init_i2c(void)
|
|
{
|
|
pxa_set_i2c_info(NULL);
|
|
i2c_register_board_info(0, cm_x300_gpio_ext_info,
|
|
ARRAY_SIZE(cm_x300_gpio_ext_info));
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_i2c(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
|
|
struct v3020_platform_data cm_x300_v3020_pdata = {
|
|
.use_gpio = 1,
|
|
.gpio_cs = GPIO95_RTC_CS,
|
|
.gpio_wr = GPIO96_RTC_WR,
|
|
.gpio_rd = GPIO97_RTC_RD,
|
|
.gpio_io = GPIO98_RTC_IO,
|
|
};
|
|
|
|
static struct platform_device cm_x300_rtc_device = {
|
|
.name = "v3020",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &cm_x300_v3020_pdata,
|
|
}
|
|
};
|
|
|
|
static void __init cm_x300_init_rtc(void)
|
|
{
|
|
platform_device_register(&cm_x300_rtc_device);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_rtc(void) {}
|
|
#endif
|
|
|
|
/* Battery */
|
|
struct power_supply_info cm_x300_psy_info = {
|
|
.name = "battery",
|
|
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
|
|
.voltage_max_design = 4200000,
|
|
.voltage_min_design = 3000000,
|
|
.use_for_apm = 1,
|
|
};
|
|
|
|
static void cm_x300_battery_low(void)
|
|
{
|
|
#if defined(CONFIG_APM_EMULATION)
|
|
apm_queue_event(APM_LOW_BATTERY);
|
|
#endif
|
|
}
|
|
|
|
static void cm_x300_battery_critical(void)
|
|
{
|
|
#if defined(CONFIG_APM_EMULATION)
|
|
apm_queue_event(APM_CRITICAL_SUSPEND);
|
|
#endif
|
|
}
|
|
|
|
struct da9030_battery_info cm_x300_battery_info = {
|
|
.battery_info = &cm_x300_psy_info,
|
|
|
|
.charge_milliamp = 1000,
|
|
.charge_millivolt = 4200,
|
|
|
|
.vbat_low = 3600,
|
|
.vbat_crit = 3400,
|
|
.vbat_charge_start = 4100,
|
|
.vbat_charge_stop = 4200,
|
|
.vbat_charge_restart = 4000,
|
|
|
|
.vcharge_min = 3200,
|
|
.vcharge_max = 5500,
|
|
|
|
.tbat_low = 197,
|
|
.tbat_high = 78,
|
|
.tbat_restart = 100,
|
|
|
|
.batmon_interval = 0,
|
|
|
|
.battery_low = cm_x300_battery_low,
|
|
.battery_critical = cm_x300_battery_critical,
|
|
};
|
|
|
|
static struct regulator_consumer_supply buck2_consumers[] = {
|
|
REGULATOR_SUPPLY("vcc_core", NULL),
|
|
};
|
|
|
|
static struct regulator_init_data buck2_data = {
|
|
.constraints = {
|
|
.min_uV = 1375000,
|
|
.max_uV = 1375000,
|
|
.state_mem = {
|
|
.enabled = 0,
|
|
},
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
|
|
.apply_uV = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
|
|
.consumer_supplies = buck2_consumers,
|
|
};
|
|
|
|
/* DA9030 */
|
|
struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
|
|
{
|
|
.name = "da903x-battery",
|
|
.id = DA9030_ID_BAT,
|
|
.platform_data = &cm_x300_battery_info,
|
|
},
|
|
{
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_BUCK2,
|
|
.platform_data = &buck2_data,
|
|
},
|
|
};
|
|
|
|
static struct da903x_platform_data cm_x300_da9030_info = {
|
|
.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
|
|
.subdevs = cm_x300_da9030_subdevs,
|
|
};
|
|
|
|
static struct i2c_board_info cm_x300_pmic_info = {
|
|
I2C_BOARD_INFO("da9030", 0x49),
|
|
.irq = IRQ_WAKEUP0,
|
|
.platform_data = &cm_x300_da9030_info,
|
|
};
|
|
|
|
static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
|
|
.use_pio = 1,
|
|
};
|
|
|
|
static void __init cm_x300_init_da9030(void)
|
|
{
|
|
pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
|
|
i2c_register_board_info(1, &cm_x300_pmic_info, 1);
|
|
irq_set_irq_wake(IRQ_WAKEUP0, 1);
|
|
}
|
|
|
|
/* wi2wi gpio setting for system_rev >= 130 */
|
|
static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
|
|
{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
|
|
{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
|
|
};
|
|
|
|
static void __init cm_x300_init_wi2wi(void)
|
|
{
|
|
int err;
|
|
|
|
if (system_rev < 130) {
|
|
cm_x300_wi2wi_gpios[0].gpio = 77; /* wlan en */
|
|
cm_x300_wi2wi_gpios[1].gpio = 78; /* bt reset */
|
|
}
|
|
|
|
/* Libertas and CSR reset */
|
|
err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
|
|
if (err) {
|
|
pr_err("failed to request wifi/bt gpios: %d\n", err);
|
|
return;
|
|
}
|
|
|
|
udelay(10);
|
|
gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
|
|
udelay(10);
|
|
gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
|
|
|
|
gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
|
|
}
|
|
|
|
/* MFP */
|
|
static void __init cm_x300_init_mfp(void)
|
|
{
|
|
/* board-processor specific GPIO initialization */
|
|
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
|
|
|
|
if (system_rev < 130)
|
|
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
|
|
else
|
|
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
|
|
|
|
if (cpu_is_pxa310())
|
|
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
|
|
}
|
|
|
|
static void __init cm_x300_init(void)
|
|
{
|
|
cm_x300_init_mfp();
|
|
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
if (cpu_is_pxa300())
|
|
pxa_set_ffuart_info(NULL);
|
|
|
|
cm_x300_init_da9030();
|
|
cm_x300_init_dm9000();
|
|
cm_x300_init_lcd();
|
|
cm_x300_init_u2d();
|
|
cm_x300_init_ohci();
|
|
cm_x300_init_mmc();
|
|
cm_x300_init_nand();
|
|
cm_x300_init_leds();
|
|
cm_x300_init_i2c();
|
|
cm_x300_init_spi();
|
|
cm_x300_init_rtc();
|
|
cm_x300_init_ac97();
|
|
cm_x300_init_wi2wi();
|
|
cm_x300_init_bl();
|
|
|
|
regulator_has_full_constraints();
|
|
}
|
|
|
|
static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
|
|
{
|
|
/* Make sure that mi->bank[0].start = PHYS_ADDR */
|
|
for (; tags->hdr.size; tags = tag_next(tags))
|
|
if (tags->hdr.tag == ATAG_MEM &&
|
|
tags->u.mem.start == 0x80000000) {
|
|
tags->u.mem.start = 0xa0000000;
|
|
break;
|
|
}
|
|
}
|
|
|
|
MACHINE_START(CM_X300, "CM-X300 module")
|
|
.atag_offset = 0x100,
|
|
.map_io = pxa3xx_map_io,
|
|
.nr_irqs = PXA_NR_IRQS,
|
|
.init_irq = pxa3xx_init_irq,
|
|
.handle_irq = pxa3xx_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.init_machine = cm_x300_init,
|
|
.fixup = cm_x300_fixup,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|