1
0
Files
kernel-49/arch/arm/boot/dts/qcom-msm8960.dtsi
Greg Kroah-Hartman f95d85c34b Merge 4.9.311 into android-4.9-q
Changes in 4.9.311
	USB: serial: pl2303: add IBM device IDs
	USB: serial: simple: add Nokia phone driver
	netdevice: add the case if dev is NULL
	virtio_console: break out of buf poll on remove
	ethernet: sun: Free the coherent when failing in probing
	af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
	block: Add a helper to validate the block size
	virtio-blk: Use blk_validate_block_size() to validate block size
	USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
	coresight: Fix TRCCONFIGR.QE sysfs interface
	iio: inkern: apply consumer scale on IIO_VAL_INT cases
	iio: inkern: make a best effort on offset calculation
	clk: uniphier: Fix fixed-rate initialization
	ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
	SUNRPC: avoid race between mod_timer() and del_timer_sync()
	NFSD: prevent underflow in nfssvc_decode_writeargs()
	can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
	jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
	jffs2: fix memory leak in jffs2_do_mount_fs
	jffs2: fix memory leak in jffs2_scan_medium
	mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
	mempolicy: mbind_range() set_policy() after vma_merge()
	scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
	Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
	ALSA: cs4236: fix an incorrect NULL check on list iterator
	drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()
	video: fbdev: sm712fb: Fix crash in smtcfb_read()
	video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
	ARM: dts: exynos: fix UART3 pins configuration in Exynos5250
	ARM: dts: exynos: add missing HDMI supplies on SMDK5250
	ARM: dts: exynos: add missing HDMI supplies on SMDK5420
	carl9170: fix missing bit-wise or operator for tx_params
	thermal: int340x: Increase bitmap size
	lib/raid6/test: fix multiple definition linking error
	DEC: Limit PMAX memory probing to R3k systems
	media: davinci: vpif: fix unbalanced runtime PM get
	brcmfmac: firmware: Allocate space for default boardrev in nvram
	brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio
	PCI: pciehp: Clear cmd_busy bit in polling mode
	crypto: authenc - Fix sleep in atomic context in decrypt_tail
	crypto: mxs-dcp - Fix scatterlist processing
	spi: tegra114: Add missing IRQ check in tegra_spi_probe
	selftests/x86: Add validity check and allow field splitting
	hwmon: (pmbus) Add mutex to regulator ops
	hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING
	PM: hibernate: fix __setup handler error handling
	PM: suspend: fix return value of __setup handler
	crypto: vmx - add missing dependencies
	crypto: ccp - ccp_dmaengine_unregister release dma channels
	hwmon: (pmbus) Add Vin unit off handling
	clocksource: acpi_pm: fix return value of __setup handler
	sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa
	perf/core: Fix address filter parser for multiple filters
	perf/x86/intel/pt: Fix address filter config for 32-bit kernel
	video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()
	video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()
	ARM: dts: qcom: ipq4019: fix sleep clock
	soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe
	media: usb: go7007: s2250-board: fix leak in probe()
	ASoC: ti: davinci-i2s: Add check for clk_enable()
	ALSA: spi: Add check for clk_enable()
	arm64: dts: ns2: Fix spi-cpol and spi-cpha property
	arm64: dts: broadcom: Fix sata nodename
	printk: fix return value of printk.devkmsg __setup handler
	ASoC: mxs-saif: Handle errors for clk_enable
	ASoC: atmel_ssc_dai: Handle errors for clk_enable
	memory: emif: Add check for setup_interrupts
	memory: emif: check the pointer temp in get_device_details()
	ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction
	ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
	ASoC: wm8350: Handle error for wm8350_register_irq
	ASoC: fsi: Add check for clk_enable
	video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
	ASoC: dmaengine: do not use a NULL prepare_slave_config() callback
	ASoC: mxs: Fix error handling in mxs_sgtl5000_probe
	ASoC: imx-es8328: Fix error return code in imx_es8328_probe()
	mtd: onenand: Check for error irq
	drm/edid: Don't clear formats if using deep color
	ath9k_htc: fix uninit value bugs
	ray_cs: Check ioremap return value
	power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init
	HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports
	iwlwifi: Fix -EIO error code that is never returned
	scsi: pm8001: Fix command initialization in pm80XX_send_read_log()
	scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()
	scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()
	scsi: pm8001: Fix abort all task initialization
	TOMOYO: fix __setup handlers return values
	ext2: correct max file size computing
	drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
	KVM: x86: Fix emulation in writing cr8
	KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()
	i2c: xiic: Make bus names unique
	power: supply: wm8350-power: Handle error for wm8350_register_irq
	power: supply: wm8350-power: Add missing free in free_charger_irq
	powerpc/sysdev: fix incorrect use to determine if list is empty
	mfd: mc13xxx: Add check for mc13xxx_irq_request
	MIPS: RB532: fix return value of __setup handler
	USB: storage: ums-realtek: fix error code in rts51x_read_mem()
	af_netlink: Fix shift out of bounds in group mask calculation
	i2c: mux: demux-pinctrl: do not deactivate a master that is not active
	mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
	mxser: fix xmit_buf leak in activate when LSR == 0xff
	pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()
	iio: adc: Add check for devm_request_threaded_irq
	clk: qcom: clk-rcg2: Update the frac table for pixel clock
	remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
	clk: loongson1: Terminate clk_div_table with sentinel element
	clk: clps711x: Terminate clk_div_table with sentinel element
	clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
	NFS: remove unneeded check in decode_devicenotify_args()
	pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
	pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
	pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
	tty: hvc: fix return value of __setup handler
	kgdboc: fix return value of __setup handler
	kgdbts: fix return value of __setup handler
	jfs: fix divide error in dbNextAG
	netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
	net: phy: broadcom: Fix brcm_fet_config_init()
	qlcnic: dcb: default to returning -EOPNOTSUPP
	net/x25: Fix null-ptr-deref caused by x25_disconnect
	selinux: use correct type for context length
	loop: use sysfs_emit() in the sysfs xxx show()
	Fix incorrect type in assignment of ipv6 port for audit
	irqchip/nvic: Release nvic_base upon failure
	ACPICA: Avoid walking the ACPI Namespace if it is not there
	ACPI/APEI: Limit printable size of BERT table data
	PM: core: keep irq flags in device_pm_check_callbacks()
	spi: tegra20: Use of_device_get_match_data()
	ext4: don't BUG if someone dirty pages without asking ext4 first
	ntfs: add sanity check on allocation size
	video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow
	video: fbdev: w100fb: Reset global state
	video: fbdev: cirrusfb: check pixclock to avoid divide by zero
	video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit
	ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
	ARM: dts: bcm2837: Add the missing L1/L2 cache information
	video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
	video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
	ASoC: soc-core: skip zero num_dai component in searching dai name
	media: cx88-mpeg: clear interrupt status register before streaming video
	ARM: tegra: tamonten: Fix I2C3 pad setting
	ARM: mmp: Fix failure to remove sram device
	video: fbdev: sm712fb: Fix crash in smtcfb_write()
	media: hdpvr: initialize dev->worker at hdpvr_register_videodev
	mmc: host: Return an error when ->enable_sdio_irq() ops is missing
	scsi: qla2xxx: Fix incorrect reporting of task management failure
	KVM: Prevent module exit until all VMs are freed
	ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
	ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
	gfs2: Make sure FITRIM minlen is rounded up to fs block size
	pinctrl: pinconf-generic: Print arguments for bias-pull-*
	ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
	mm/mmap: return 1 from stack_guard_gap __setup() handler
	mm/memcontrol: return 1 from cgroup.memory __setup() handler
	ubi: fastmap: Return error code if memory allocation fails in add_aeb()
	ASoC: topology: Allow TLV control to be either read or write
	ARM: dts: spear1340: Update serial node properties
	ARM: dts: spear13xx: Update SPI dma properties
	openvswitch: Fixed nd target mask field in the flow dump.
	KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated
	rtc: wm8350: Handle error for wm8350_register_irq
	ARM: 9187/1: JIVE: fix return value of __setup handler
	KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
	ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
	ptp: replace snprintf with sysfs_emit
	powerpc: dts: t104xrdb: fix phy type for FMAN 4/5
	scsi: mvsas: Replace snprintf() with sysfs_emit()
	scsi: bfa: Replace snprintf() with sysfs_emit()
	iommu/arm-smmu-v3: fix event handling soft lockup
	dm ioctl: prevent potential spectre v1 gadget
	scsi: pm8001: Fix pm8001_mpi_task_abort_resp()
	scsi: aha152x: Fix aha152x_setup() __setup handler return value
	bnxt_en: Eliminate unintended link toggle during FW reset
	MIPS: fix fortify panic when copying asm exception handlers
	scsi: libfc: Fix use after free in fc_exch_abts_resp()
	usb: dwc3: omap: fix "unbalanced disables for smps10_out1" on omap5evm
	xtensa: fix DTC warning unit_address_format
	Bluetooth: Fix use after free in hci_send_acl
	init/main.c: return 1 from handled __setup() functions
	w1: w1_therm: fixes w1_seq for ds28ea00 sensors
	SUNRPC/call_alloc: async tasks mustn't block waiting for memory
	serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
	virtio_console: eliminate anonymous module_init & module_exit
	jfs: prevent NULL deref in diFree
	mm: fix race between MADV_FREE reclaim and blkdev direct IO read
	scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
	net: stmmac: Fix unset max_speed difference between DT and non-DT platforms
	drm/imx: Fix memory leak in imx_pd_connector_get_modes
	drbd: Fix five use after free bugs in get_initial_state
	mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
	mm/mempolicy: fix mpol_new leak in shared_policy_replace
	x86/pm: Save the MSR validity status at context setup
	x86/speculation: Restore speculation related MSRs during S3 resume
	arm64: patch_text: Fixup last cpu should be master
	tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
	dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"
	mm: don't skip swap entry even if zap_details specified
	arm64: module: remove (NOLOAD) from linker script
	xfrm: policy: match with both mark and mask on user interfaces
	veth: Ensure eth header is in skb's linear part
	net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link
	nfc: nci: add flush_workqueue to prevent uaf
	cifs: potential buffer overflow in handling symlinks
	drm/amdkfd: Check for potential null return of kmalloc_array()
	scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
	net: micrel: fix KS8851_MLL Kconfig
	gpu: ipu-v3: Fix dev_dbg frequency output
	scsi: mvsas: Add PCI ID of RocketRaid 2640
	drivers: net: slip: fix NPD bug in sl_tx_timeout()
	mm, page_alloc: fix build_zonerefs_node()
	mm: kmemleak: take a full lowmem check in kmemleak_*_phys()
	ALSA: pcm: Test for "silence" field in struct "pcm_format_data"
	ARM: davinci: da850-evm: Avoid NULL pointer dereference
	smp: Fix offline cpu check in flush_smp_call_function_queue()
	i2c: pasemi: Wait for write xfers to finish
	gcc-plugins: latent_entropy: use /dev/urandom
	Linux 4.9.311

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ia8f55c5ae2f0eb71b0893d8271a10dfd3c78b3b8
2022-04-25 16:25:23 +03:00

327 lines
7.2 KiB
Plaintext

/dts-v1/;
/include/ "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
/ {
model = "Qualcomm MSM8960";
compatible = "qcom,msm8960";
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <1 14 0x304>;
cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
};
cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
cpu-pmu {
compatible = "qcom,krait-pmu";
interrupts = <1 10 0x304>;
qcom,no-pc-write;
};
clocks {
cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
clock-output-names = "cxo_board";
};
pxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
clock-output-names = "pxo_board";
};
sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "sleep_clk";
};
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x02000000 0x1000>,
<0x02002000 0x1000>;
};
timer@200a000 {
compatible = "qcom,kpss-timer",
"qcom,kpss-wdt-msm8960", "qcom,msm-timer";
interrupts = <1 1 0x301>,
<1 2 0x301>,
<1 3 0x301>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>,
<32768>;
cpu-offset = <0x80000>;
};
msmgpio: pinctrl@800000 {
compatible = "qcom,msm8960-pinctrl";
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800000 0x4000>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8960";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
lcc: clock-controller@28000000 {
compatible = "qcom,lcc-msm8960";
reg = <0x28000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
clock-controller@4000000 {
compatible = "qcom,mmcc-msm8960";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
l2cc: clock-controller@2011000 {
compatible = "syscon";
reg = <0x2011000 0x1000>;
};
rpm@108000 {
compatible = "qcom,rpm-msm8960";
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8921-regulators";
};
};
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
};
acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
};
saw0: regulator@2089000 {
compatible = "qcom,saw2";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
regulator;
};
saw1: regulator@2099000 {
compatible = "qcom,saw2";
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
regulator;
};
gsbi5: gsbi@16400000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <5>;
reg = <0x16400000 0x100>;
clocks = <&gcc GSBI5_H_CLK>;
clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges;
syscon-tcsr = <&tcsr>;
gsbi5_serial: serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
pmicintc: pmic@0 {
compatible = "qcom,pm8921";
interrupt-parent = <&msmgpio>;
interrupts = <104 8>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
pwrkey@1c {
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
interrupt-parent = <&pmicintc>;
interrupts = <50 1>, <51 1>;
debounce = <15625>;
pull-up;
};
keypad@148 {
compatible = "qcom,pm8921-keypad";
reg = <0x148>;
interrupt-parent = <&pmicintc>;
interrupts = <74 1>, <75 1>;
debounce = <15>;
scan-delay = <32>;
row-hold = <91500>;
};
rtc@11d {
compatible = "qcom,pm8921-rtc";
interrupt-parent = <&pmicintc>;
interrupts = <39 1>;
reg = <0x11d>;
allow-set-time;
};
};
};
rng@1a500000 {
compatible = "qcom,prng";
reg = <0x1a500000 0x200>;
clocks = <&gcc PRNG_CLK>;
clock-names = "core";
};
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
regulator-always-on;
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sdcc1: sdcc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x8000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
vmmc-supply = <&vsdcc_fixed>;
};
sdcc3: sdcc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x8000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
no-1-8-v;
vmmc-supply = <&vsdcc_fixed>;
};
};
tcsr: syscon@1a400000 {
compatible = "qcom,tcsr-msm8960", "syscon";
reg = <0x1a400000 0x100>;
};
gsbi@16000000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <1>;
reg = <0x16000000 0x100>;
clocks = <&gcc GSBI1_H_CLK>;
clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges;
spi@16080000 {
compatible = "qcom,spi-qup-v1.1.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x16080000 0x1000>;
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <24000000>;
cs-gpios = <&msmgpio 8 0>;
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
};
};
};