1
0
Files
kernel-49/arch/arm/boot/dts/exynos5420-smdk5420.dts
Greg Kroah-Hartman f95d85c34b Merge 4.9.311 into android-4.9-q
Changes in 4.9.311
	USB: serial: pl2303: add IBM device IDs
	USB: serial: simple: add Nokia phone driver
	netdevice: add the case if dev is NULL
	virtio_console: break out of buf poll on remove
	ethernet: sun: Free the coherent when failing in probing
	af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
	block: Add a helper to validate the block size
	virtio-blk: Use blk_validate_block_size() to validate block size
	USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
	coresight: Fix TRCCONFIGR.QE sysfs interface
	iio: inkern: apply consumer scale on IIO_VAL_INT cases
	iio: inkern: make a best effort on offset calculation
	clk: uniphier: Fix fixed-rate initialization
	ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
	SUNRPC: avoid race between mod_timer() and del_timer_sync()
	NFSD: prevent underflow in nfssvc_decode_writeargs()
	can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
	jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
	jffs2: fix memory leak in jffs2_do_mount_fs
	jffs2: fix memory leak in jffs2_scan_medium
	mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
	mempolicy: mbind_range() set_policy() after vma_merge()
	scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
	Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
	ALSA: cs4236: fix an incorrect NULL check on list iterator
	drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()
	video: fbdev: sm712fb: Fix crash in smtcfb_read()
	video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
	ARM: dts: exynos: fix UART3 pins configuration in Exynos5250
	ARM: dts: exynos: add missing HDMI supplies on SMDK5250
	ARM: dts: exynos: add missing HDMI supplies on SMDK5420
	carl9170: fix missing bit-wise or operator for tx_params
	thermal: int340x: Increase bitmap size
	lib/raid6/test: fix multiple definition linking error
	DEC: Limit PMAX memory probing to R3k systems
	media: davinci: vpif: fix unbalanced runtime PM get
	brcmfmac: firmware: Allocate space for default boardrev in nvram
	brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio
	PCI: pciehp: Clear cmd_busy bit in polling mode
	crypto: authenc - Fix sleep in atomic context in decrypt_tail
	crypto: mxs-dcp - Fix scatterlist processing
	spi: tegra114: Add missing IRQ check in tegra_spi_probe
	selftests/x86: Add validity check and allow field splitting
	hwmon: (pmbus) Add mutex to regulator ops
	hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING
	PM: hibernate: fix __setup handler error handling
	PM: suspend: fix return value of __setup handler
	crypto: vmx - add missing dependencies
	crypto: ccp - ccp_dmaengine_unregister release dma channels
	hwmon: (pmbus) Add Vin unit off handling
	clocksource: acpi_pm: fix return value of __setup handler
	sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa
	perf/core: Fix address filter parser for multiple filters
	perf/x86/intel/pt: Fix address filter config for 32-bit kernel
	video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()
	video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()
	ARM: dts: qcom: ipq4019: fix sleep clock
	soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe
	media: usb: go7007: s2250-board: fix leak in probe()
	ASoC: ti: davinci-i2s: Add check for clk_enable()
	ALSA: spi: Add check for clk_enable()
	arm64: dts: ns2: Fix spi-cpol and spi-cpha property
	arm64: dts: broadcom: Fix sata nodename
	printk: fix return value of printk.devkmsg __setup handler
	ASoC: mxs-saif: Handle errors for clk_enable
	ASoC: atmel_ssc_dai: Handle errors for clk_enable
	memory: emif: Add check for setup_interrupts
	memory: emif: check the pointer temp in get_device_details()
	ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction
	ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
	ASoC: wm8350: Handle error for wm8350_register_irq
	ASoC: fsi: Add check for clk_enable
	video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
	ASoC: dmaengine: do not use a NULL prepare_slave_config() callback
	ASoC: mxs: Fix error handling in mxs_sgtl5000_probe
	ASoC: imx-es8328: Fix error return code in imx_es8328_probe()
	mtd: onenand: Check for error irq
	drm/edid: Don't clear formats if using deep color
	ath9k_htc: fix uninit value bugs
	ray_cs: Check ioremap return value
	power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init
	HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports
	iwlwifi: Fix -EIO error code that is never returned
	scsi: pm8001: Fix command initialization in pm80XX_send_read_log()
	scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()
	scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()
	scsi: pm8001: Fix abort all task initialization
	TOMOYO: fix __setup handlers return values
	ext2: correct max file size computing
	drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
	KVM: x86: Fix emulation in writing cr8
	KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()
	i2c: xiic: Make bus names unique
	power: supply: wm8350-power: Handle error for wm8350_register_irq
	power: supply: wm8350-power: Add missing free in free_charger_irq
	powerpc/sysdev: fix incorrect use to determine if list is empty
	mfd: mc13xxx: Add check for mc13xxx_irq_request
	MIPS: RB532: fix return value of __setup handler
	USB: storage: ums-realtek: fix error code in rts51x_read_mem()
	af_netlink: Fix shift out of bounds in group mask calculation
	i2c: mux: demux-pinctrl: do not deactivate a master that is not active
	mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
	mxser: fix xmit_buf leak in activate when LSR == 0xff
	pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()
	iio: adc: Add check for devm_request_threaded_irq
	clk: qcom: clk-rcg2: Update the frac table for pixel clock
	remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
	clk: loongson1: Terminate clk_div_table with sentinel element
	clk: clps711x: Terminate clk_div_table with sentinel element
	clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
	NFS: remove unneeded check in decode_devicenotify_args()
	pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
	pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
	pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
	tty: hvc: fix return value of __setup handler
	kgdboc: fix return value of __setup handler
	kgdbts: fix return value of __setup handler
	jfs: fix divide error in dbNextAG
	netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
	net: phy: broadcom: Fix brcm_fet_config_init()
	qlcnic: dcb: default to returning -EOPNOTSUPP
	net/x25: Fix null-ptr-deref caused by x25_disconnect
	selinux: use correct type for context length
	loop: use sysfs_emit() in the sysfs xxx show()
	Fix incorrect type in assignment of ipv6 port for audit
	irqchip/nvic: Release nvic_base upon failure
	ACPICA: Avoid walking the ACPI Namespace if it is not there
	ACPI/APEI: Limit printable size of BERT table data
	PM: core: keep irq flags in device_pm_check_callbacks()
	spi: tegra20: Use of_device_get_match_data()
	ext4: don't BUG if someone dirty pages without asking ext4 first
	ntfs: add sanity check on allocation size
	video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow
	video: fbdev: w100fb: Reset global state
	video: fbdev: cirrusfb: check pixclock to avoid divide by zero
	video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit
	ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
	ARM: dts: bcm2837: Add the missing L1/L2 cache information
	video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
	video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
	ASoC: soc-core: skip zero num_dai component in searching dai name
	media: cx88-mpeg: clear interrupt status register before streaming video
	ARM: tegra: tamonten: Fix I2C3 pad setting
	ARM: mmp: Fix failure to remove sram device
	video: fbdev: sm712fb: Fix crash in smtcfb_write()
	media: hdpvr: initialize dev->worker at hdpvr_register_videodev
	mmc: host: Return an error when ->enable_sdio_irq() ops is missing
	scsi: qla2xxx: Fix incorrect reporting of task management failure
	KVM: Prevent module exit until all VMs are freed
	ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
	ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
	gfs2: Make sure FITRIM minlen is rounded up to fs block size
	pinctrl: pinconf-generic: Print arguments for bias-pull-*
	ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
	mm/mmap: return 1 from stack_guard_gap __setup() handler
	mm/memcontrol: return 1 from cgroup.memory __setup() handler
	ubi: fastmap: Return error code if memory allocation fails in add_aeb()
	ASoC: topology: Allow TLV control to be either read or write
	ARM: dts: spear1340: Update serial node properties
	ARM: dts: spear13xx: Update SPI dma properties
	openvswitch: Fixed nd target mask field in the flow dump.
	KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated
	rtc: wm8350: Handle error for wm8350_register_irq
	ARM: 9187/1: JIVE: fix return value of __setup handler
	KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
	ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
	ptp: replace snprintf with sysfs_emit
	powerpc: dts: t104xrdb: fix phy type for FMAN 4/5
	scsi: mvsas: Replace snprintf() with sysfs_emit()
	scsi: bfa: Replace snprintf() with sysfs_emit()
	iommu/arm-smmu-v3: fix event handling soft lockup
	dm ioctl: prevent potential spectre v1 gadget
	scsi: pm8001: Fix pm8001_mpi_task_abort_resp()
	scsi: aha152x: Fix aha152x_setup() __setup handler return value
	bnxt_en: Eliminate unintended link toggle during FW reset
	MIPS: fix fortify panic when copying asm exception handlers
	scsi: libfc: Fix use after free in fc_exch_abts_resp()
	usb: dwc3: omap: fix "unbalanced disables for smps10_out1" on omap5evm
	xtensa: fix DTC warning unit_address_format
	Bluetooth: Fix use after free in hci_send_acl
	init/main.c: return 1 from handled __setup() functions
	w1: w1_therm: fixes w1_seq for ds28ea00 sensors
	SUNRPC/call_alloc: async tasks mustn't block waiting for memory
	serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
	virtio_console: eliminate anonymous module_init & module_exit
	jfs: prevent NULL deref in diFree
	mm: fix race between MADV_FREE reclaim and blkdev direct IO read
	scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
	net: stmmac: Fix unset max_speed difference between DT and non-DT platforms
	drm/imx: Fix memory leak in imx_pd_connector_get_modes
	drbd: Fix five use after free bugs in get_initial_state
	mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
	mm/mempolicy: fix mpol_new leak in shared_policy_replace
	x86/pm: Save the MSR validity status at context setup
	x86/speculation: Restore speculation related MSRs during S3 resume
	arm64: patch_text: Fixup last cpu should be master
	tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
	dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"
	mm: don't skip swap entry even if zap_details specified
	arm64: module: remove (NOLOAD) from linker script
	xfrm: policy: match with both mark and mask on user interfaces
	veth: Ensure eth header is in skb's linear part
	net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link
	nfc: nci: add flush_workqueue to prevent uaf
	cifs: potential buffer overflow in handling symlinks
	drm/amdkfd: Check for potential null return of kmalloc_array()
	scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
	net: micrel: fix KS8851_MLL Kconfig
	gpu: ipu-v3: Fix dev_dbg frequency output
	scsi: mvsas: Add PCI ID of RocketRaid 2640
	drivers: net: slip: fix NPD bug in sl_tx_timeout()
	mm, page_alloc: fix build_zonerefs_node()
	mm: kmemleak: take a full lowmem check in kmemleak_*_phys()
	ALSA: pcm: Test for "silence" field in struct "pcm_format_data"
	ARM: davinci: da850-evm: Avoid NULL pointer dereference
	smp: Fix offline cpu check in flush_smp_call_function_queue()
	i2c: pasemi: Wait for write xfers to finish
	gcc-plugins: latent_entropy: use /dev/urandom
	Linux 4.9.311

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ia8f55c5ae2f0eb71b0893d8271a10dfd3c78b3b8
2022-04-25 16:25:23 +03:00

426 lines
9.4 KiB
Plaintext

/*
* SAMSUNG SMDK5420 board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos5420.dtsi"
#include "exynos5420-cpus.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung SMDK5420 board based on EXYNOS5420";
compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x80000000>;
};
chosen {
bootargs = "console=ttySAC2,115200 init=/linuxrc";
};
fixed-rate-clocks {
oscclk {
compatible = "samsung,exynos5420-oscclk";
clock-frequency = <24000000>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd: fixed-regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vdd-supply";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
dbvdd: fixed-regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "dbvdd-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
spkvdd: fixed-regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "spkvdd-supply";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
usb300_vbus_reg: regulator-usb300 {
compatible = "regulator-fixed";
regulator-name = "VBUS0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
};
usb301_vbus_reg: regulator-usb301 {
compatible = "regulator-fixed";
regulator-name = "VBUS1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
};
};
&cpu0 {
cpu-supply = <&buck2_reg>;
};
&cpu4 {
cpu-supply = <&buck6_reg>;
};
&dp {
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
samsung,color-space = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: timing {
clock-frequency = <50000>;
hactive = <2560>;
vactive = <1600>;
hfront-porch = <48>;
hback-porch = <80>;
hsync-len = <32>;
vback-porch = <16>;
vfront-porch = <8>;
vsync-len = <6>;
};
};
};
&fimd {
status = "okay";
};
&hdmi {
status = "okay";
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
vdd-supply = <&ldo6_reg>;
vdd_osc-supply = <&ldo7_reg>;
vdd_pll-supply = <&ldo6_reg>;
};
&hsi2c_4 {
status = "okay";
s2mps11_pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
s2mps11_osc: clocks {
#clock-cells = <1>;
clock-output-names = "s2mps11_ap",
"s2mps11_cp", "s2mps11_bt";
};
regulators {
ldo1_reg: LDO1 {
regulator-name = "vdd_ldo1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "vdd_ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo5_reg: LDO5 {
regulator-name = "vdd_ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "vdd_ldo6";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "vdd_ldo7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "vdd_ldo8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo9_reg: LDO9 {
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "vdd_ldo12";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo13_reg: LDO13 {
regulator-name = "vdd_ldo13";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-always-on;
};
ldo16_reg: LDO16 {
regulator-name = "vdd_ldo16";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
regulator-always-on;
};
ldo17_reg: LDO17 {
regulator-name = "tsp_avdd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo19_reg: LDO19 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo24_reg: LDO24 {
regulator-name = "tsp_io";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "vdd_mem";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck6_reg: BUCK6 {
regulator-name = "vdd_kfc";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck7_reg: BUCK7 {
regulator-name = "vdd_1.0v_ldo";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck8_reg: BUCK8 {
regulator-name = "vdd_1.8v_ldo";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck9_reg: BUCK9 {
regulator-name = "vdd_2.8v_ldo";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3750000>;
regulator-always-on;
regulator-boot-on;
};
buck10_reg: BUCK10 {
regulator-name = "vdd_vmem";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
status = "okay";
hdmiddc@50 {
compatible = "samsung,exynos4210-hdmiddc";
reg = <0x50>;
};
};
&mmc_0 {
status = "okay";
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
samsung,dw-mshc-hs400-timing = <0 2>;
samsung,read-strobe-delay = <90>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8
&sd0_rclk>;
bus-width = <8>;
cap-mmc-highspeed;
};
&mmc_2 {
status = "okay";
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
cap-sd-highspeed;
};
&pinctrl_0 {
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
&pinctrl_2 {
usb300_vbus_en: usb300-vbus-en {
samsung,pins = "gpg0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
usb301_vbus_en: usb301-vbus-en {
samsung,pins = "gpg1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
&rtc {
status = "okay";
};
&usbdrd_phy0 {
vbus-supply = <&usb300_vbus_reg>;
};
&usbdrd_phy1 {
vbus-supply = <&usb301_vbus_reg>;
};