483e66c0e0
Changes in 4.9.249 spi: bcm2835aux: Fix use-after-free on unbind spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe iwlwifi: pcie: limit memory read spin time arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. ARC: stack unwinding: don't assume non-current task is sleeping platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE Input: cm109 - do not stomp on control URB Input: i8042 - add Acer laptops to the i8042 reset list pinctrl: amd: remove debounce filter setting in IRQ type setting scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" spi: Prevent adding devices below an unregistering controller net/mlx4_en: Avoid scheduling restart task if it is already running tcp: fix cwnd-limited bug for TSO deferral where we send nothing net: stmmac: delete the eee_ctrl_timer after napi disabled net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux net: bridge: vlan: fix error return code in __vlan_add() mac80211: mesh: fix mesh_pathtbl_init() error path USB: dummy-hcd: Fix uninitialized array use in init() USB: add RESET_RESUME quirk for Snapscan 1212 ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: usb-audio: Fix control 'access overflow' errors from chmap xhci: Give USB2 ports time to enter U3 in bus suspend USB: sisusbvga: Make console support depend on BROKEN ALSA: pcm: oss: Fix potential out-of-bounds shift serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access pinctrl: merrifield: Set default bias in case no particular value given pinctrl: baytrail: Avoid clearing debounce value when turning it off scsi: bnx2i: Requires MMU can: softing: softing_netdev_open(): fix error handling RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling drm/tegra: sor: Disable clocks on error in tegra_sor_init() scsi: mpt3sas: Increase IOCInit request timeout to 30s dm table: Remove BUG_ON(in_interrupt()) soc/tegra: fuse: Fix index bug in get_process_id USB: serial: option: add interface-number sanity check to flag handling USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XU ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410 ARM: dts: exynos: fix USB 3.0 pins supply being turned off on Odroid XU HID: i2c-hid: add Vero K147 to descriptor override serial_core: Check for port state when tty is in error state media: msi2500: assign SPI bus number dynamically md: fix a warning caused by a race between concurrent md_ioctl()s Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() drm/gma500: fix double free of gma_connector RDMA/rxe: Compute PSN windows correctly ARM: p2v: fix handling of LPAE translation in BE mode crypto: talitos - Fix return type of current_desc_hdr() spi: img-spfi: fix reference leak in img_spfi_resume ASoC: pcm: DRAIN support reactivation arm64: dts: exynos: Correct psci compatible used on Exynos7 Bluetooth: Fix null pointer dereference in hci_event_packet() spi: spi-ti-qspi: fix reference leak in ti_qspi_setup spi: tegra20-slink: fix reference leak in slink ops of tegra20 spi: tegra20-sflash: fix reference leak in tegra_sflash_resume spi: tegra114: fix reference leak in tegra spi ops RDMa/mthca: Work around -Wenum-conversion warning MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA staging: greybus: codecs: Fix reference counter leak in error handling media: solo6x10: fix missing snd_card_free in error handling case drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() Input: ads7846 - fix integer overflow on Rt calculation Input: ads7846 - fix unaligned access on 7845 powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 crypto: omap-aes - Fix PM disable depth imbalance in omap_aes_probe soc: ti: knav_qmss: fix reference leak in knav_queue_probe soc: ti: Fix reference imbalance in knav_dma_probe drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe RDMA/cxgb4: Validate the number of CQEs memstick: fix a double-free bug in memstick_check ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host orinoco: Move context allocation after processing the skb cw1200: fix missing destroy_workqueue() on error in cw1200_init_common media: siano: fix memory leak of debugfs members in smsdvb_hotplug mips: cdmm: fix use-after-free in mips_cdmm_bus_discover HSI: omap_ssi: Don't jump to free ID in ssi_add_controller() ARM: dts: at91: at91sam9rl: fix ADC triggers NFSv4.2: condition READDIR's mask for security label based on LSM state SUNRPC: xprt_load_transport() needs to support the netid "rdma6" lockd: don't use interval-based rebinding over TCP NFS: switch nfsiod to be an UNBOUND workqueue. vfio-pci: Use io_remap_pfn_range() for PCI IO memory media: saa7146: fix array overflow in vidioc_s_audio() clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent() pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe() memstick: r592: Fix error return in r592_probe() ASoC: jz4740-i2s: add missed checks for clk_get() dm ioctl: fix error return code in target_message clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI cpufreq: highbank: Add missing MODULE_DEVICE_TABLE cpufreq: st: Add missing MODULE_DEVICE_TABLE cpufreq: loongson1: Add missing MODULE_ALIAS cpufreq: scpi: Add missing MODULE_ALIAS scsi: pm80xx: Fix error return in pm8001_pci_probe() seq_buf: Avoid type mismatch for seq_buf_init scsi: fnic: Fix error return code in fnic_probe() powerpc/pseries/hibernation: drop pseries_suspend_begin() from suspend ops usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probe usb: oxu210hp-hcd: Fix memory leak in oxu_create speakup: fix uninitialized flush_lock nfsd: Fix message level for normal termination nfs_common: need lock during iterate through the list x86/kprobes: Restore BTF if the single-stepping is cancelled clk: tegra: Fix duplicated SE clock entry extcon: max77693: Fix modalias string ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control() irqchip/alpine-msi: Fix freeing of interrupts on allocation error path um: chan_xterm: Fix fd leak nfc: s3fwrn5: Release the nfc firmware powerpc/ps3: use dma_mapping_error() checkpatch: fix unescaped left brace net: bcmgenet: Fix a resource leak in an error handling path in the probe functin net: allwinner: Fix some resources leak in the error handling path of the probe and in the remove function net: korina: fix return value watchdog: qcom: Avoid context switch in restart handler clk: ti: Fix memleak in ti_fapll_synth_setup perf record: Fix memory leak when using '--user-regs=?' to list registers qlcnic: Fix error code in probe clk: s2mps11: Fix a resource leak in error handling paths in the probe function cfg80211: initialize rekey_data Input: cros_ec_keyb - send 'scancodes' in addition to key events Input: goodix - add upside-down quirk for Teclast X98 Pro tablet media: gspca: Fix memory leak in probe media: sunxi-cir: ensure IR is handled when it is continuous media: netup_unidvb: Don't leak SPI master in probe error path Input: cyapa_gen6 - fix out-of-bounds stack access Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks" ACPI: PNP: compare the string length in the matching_id() ALSA: pcm: oss: Fix a few more UBSAN fixes ALSA: usb-audio: Disable sample read check if firmware doesn't give back s390/dasd: prevent inconsistent LCU device data s390/dasd: fix list corruption of pavgroup group list s390/dasd: fix list corruption of lcu list staging: comedi: mf6x4: Fix AI end-of-conversion detection powerpc/perf: Exclude kernel samples while counting events in user space. USB: serial: mos7720: fix parallel-port state restore USB: serial: keyspan_pda: fix dropped unthrottle interrupts USB: serial: keyspan_pda: fix write deadlock USB: serial: keyspan_pda: fix stalled writes USB: serial: keyspan_pda: fix write-wakeup use-after-free USB: serial: keyspan_pda: fix tx-unthrottle use-after-free USB: serial: keyspan_pda: fix write unthrottling btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block() Btrfs: fix selftests failure due to uninitialized i_mode in test inodes btrfs: fix return value mixup in btrfs_get_extent ext4: fix a memory leak of ext4_free_data KVM: arm64: Introduce handling of AArch32 TTBCR2 traps powerpc/xmon: Change printk() to pr_cont() ceph: fix race in concurrent __ceph_remove_cap invocations jffs2: Fix GC exit abnormally jfs: Fix array index bounds check in dbAdjTree drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor() spi: spi-sh: Fix use-after-free on unbind spi: davinci: Fix use-after-free on unbind spi: pic32: Don't leak DMA channels in probe error path spi: rb4xx: Don't leak SPI master in probe error path spi: sc18is602: Don't leak SPI master in probe error path spi: st-ssc4: Fix unbalanced pm_runtime_disable() in probe error path soc: qcom: smp2p: Safely acquire spinlock without IRQs mtd: parser: cmdline: Fix parsing of part-names with colons iio: buffer: Fix demux update iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume iio:pressure:mpl3115: Force alignment of buffer clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 xen-blkback: set ring->xenblkd to NULL after kthread_stop() PCI: Fix pci_slot_release() NULL pointer dereference Linux 4.9.249 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I4829a32e2ea6e76eefea716f35f42ee02b75c265
647 lines
12 KiB
Plaintext
647 lines
12 KiB
Plaintext
/*
|
|
* Exynos5410 SoC pin-mux and pin-config device tree source
|
|
*
|
|
* Copyright (c) 2013 Hardkernel Co., Ltd.
|
|
* http://www.hardkernel.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/pinctrl/samsung.h>
|
|
|
|
&pinctrl_0 {
|
|
gpa0: gpa0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpa1: gpa1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpa2: gpa2 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpb0: gpb0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpb1: gpb1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpb2: gpb2 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpb3: gpb3 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpc0: gpc0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpc3: gpc3 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpc1: gpc1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpc2: gpc2 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpm5: gpm5 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpd1: gpd1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpe0: gpe0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpe1: gpe1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpf0: gpf0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpf1: gpf1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpg0: gpg0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpg1: gpg1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpg2: gpg2 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gph0: gph0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gph1: gph1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpm7: gpm7 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpy0: gpy0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpy1: gpy1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpy2: gpy2 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpy3: gpy3 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpy4: gpy4 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpy5: gpy5 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpy6: gpy6 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpy7: gpy7 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpx0: gpx0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
interrupt-parent = <&combiner>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <23 0>,
|
|
<24 0>,
|
|
<25 0>,
|
|
<25 1>,
|
|
<26 0>,
|
|
<26 1>,
|
|
<27 0>,
|
|
<27 1>;
|
|
};
|
|
|
|
gpx1: gpx1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
interrupt-parent = <&combiner>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <28 0>,
|
|
<28 1>,
|
|
<29 0>,
|
|
<29 1>,
|
|
<30 0>,
|
|
<30 1>,
|
|
<31 0>,
|
|
<31 1>;
|
|
};
|
|
|
|
gpx2: gpx2 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpx3: gpx3 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
uart0_data: uart0-data {
|
|
samsung,pins = "gpa0-0", "gpa0-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
uart0_fctl: uart0-fctl {
|
|
samsung,pins = "gpa0-2", "gpa0-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
uart1_data: uart1-data {
|
|
samsung,pins = "gpa0-4", "gpa0-5";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
uart1_fctl: uart1-fctl {
|
|
samsung,pins = "gpa0-6", "gpa0-7";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
i2c2_bus: i2c2-bus {
|
|
samsung,pins = "gpa0-6", "gpa0-7";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
uart2_data: uart2-data {
|
|
samsung,pins = "gpa1-0", "gpa1-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
uart2_fctl: uart2-fctl {
|
|
samsung,pins = "gpa1-2", "gpa1-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
i2c3_bus: i2c3-bus {
|
|
samsung,pins = "gpa1-2", "gpa1-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
uart3_data: uart3-data {
|
|
samsung,pins = "gpa1-4", "gpa1-5";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
i2c4_hs_bus: i2c4-hs-bus {
|
|
samsung,pins = "gpa2-0", "gpa2-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
i2c5_hs_bus: i2c5-hs-bus {
|
|
samsung,pins = "gpa2-2", "gpa2-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
i2c6_hs_bus: i2c6-hs-bus {
|
|
samsung,pins = "gpb1-3", "gpb1-4";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
pwm0_out: pwm0-out {
|
|
samsung,pins = "gpb2-0";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
pwm1_out: pwm1-out {
|
|
samsung,pins = "gpb2-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
pwm2_out: pwm2-out {
|
|
samsung,pins = "gpb2-2";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
pwm3_out: pwm3-out {
|
|
samsung,pins = "gpb2-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
i2c7_hs_bus: i2c7-hs-bus {
|
|
samsung,pins = "gpb2-2", "gpb2-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
i2c0_bus: i2c0-bus {
|
|
samsung,pins = "gpb3-0", "gpb3-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
i2c1_bus: i2c1-bus {
|
|
samsung,pins = "gpb3-2", "gpb3-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
sd0_clk: sd0-clk {
|
|
samsung,pins = "gpc0-0";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
|
|
sd0_cmd: sd0-cmd {
|
|
samsung,pins = "gpc0-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
|
|
sd0_cd: sd0-cd {
|
|
samsung,pins = "gpc0-2";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
|
|
sd0_bus1: sd0-bus-width1 {
|
|
samsung,pins = "gpc0-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
|
|
sd0_bus4: sd0-bus-width4 {
|
|
samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
|
|
sd2_clk: sd2-clk {
|
|
samsung,pins = "gpc2-0";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
|
|
sd2_cmd: sd2-cmd {
|
|
samsung,pins = "gpc2-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
|
|
sd2_cd: sd2-cd {
|
|
samsung,pins = "gpc2-2";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
|
|
sd2_bus1: sd2-bus-width1 {
|
|
samsung,pins = "gpc2-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
|
|
sd2_bus4: sd2-bus-width4 {
|
|
samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
|
|
sd0_bus8: sd0-bus-width8 {
|
|
samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
gpj0: gpj0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpj1: gpj1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpj2: gpj2 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpj3: gpj3 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpj4: gpj4 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpk0: gpk0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpk1: gpk1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpk2: gpk2 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpk3: gpk3 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
usb3_1_oc: usb3-1-oc {
|
|
samsung,pins = "gpk2-4", "gpk2-5";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
usb3_1_vbusctrl: usb3-1-vbusctrl {
|
|
samsung,pins = "gpk2-6", "gpk2-7";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
usb3_0_oc: usb3-0-oc {
|
|
samsung,pins = "gpk3-0", "gpk3-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
|
|
usb3_0_vbusctrl: usb3-0-vbusctrl {
|
|
samsung,pins = "gpk3-2", "gpk3-3";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_2 {
|
|
gpv0: gpv0 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpv1: gpv1 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpv2: gpv2 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpv3: gpv3 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpv4: gpv4 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_3 {
|
|
gpz: gpz {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|