257 lines
6.7 KiB
C
Executable File
257 lines
6.7 KiB
C
Executable File
/*
|
|
* Core driver for STw4810/STw4811
|
|
*
|
|
* Copyright (C) 2013 ST-Ericsson SA
|
|
* Written on behalf of Linaro for ST-Ericsson
|
|
*
|
|
* Author: Linus Walleij <linus.walleij@linaro.org>
|
|
*
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/stw481x.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
|
|
/*
|
|
* This driver can only access the non-USB portions of STw4811, the register
|
|
* range 0x00-0x10 dealing with USB is bound to the two special I2C pins used
|
|
* for USB control.
|
|
*/
|
|
|
|
/* Registers inside the power control address space */
|
|
#define STW_PC_VCORE_SEL 0x05U
|
|
#define STW_PC_VAUX_SEL 0x06U
|
|
#define STW_PC_VPLL_SEL 0x07U
|
|
|
|
/**
|
|
* stw481x_get_pctl_reg() - get a power control register
|
|
* @stw481x: handle to the stw481x chip
|
|
* @reg: power control register to fetch
|
|
*
|
|
* The power control registers is a set of one-time-programmable registers
|
|
* in its own register space, accessed by writing addess bits to these
|
|
* two registers: bits 7,6,5 of PCTL_REG_LO corresponds to the 3 LSBs of
|
|
* the address and bits 8,9 of PCTL_REG_HI corresponds to the 2 MSBs of
|
|
* the address, forming an address space of 5 bits, i.e. 32 registers
|
|
* 0x00 ... 0x1f can be obtained.
|
|
*/
|
|
static int stw481x_get_pctl_reg(struct stw481x *stw481x, u8 reg)
|
|
{
|
|
u8 msb = (reg >> 3) & 0x03;
|
|
u8 lsb = (reg << 5) & 0xe0;
|
|
unsigned int val;
|
|
u8 vrfy;
|
|
int ret;
|
|
|
|
ret = regmap_write(stw481x->map, STW_PCTL_REG_HI, msb);
|
|
if (ret)
|
|
return ret;
|
|
ret = regmap_write(stw481x->map, STW_PCTL_REG_LO, lsb);
|
|
if (ret)
|
|
return ret;
|
|
ret = regmap_read(stw481x->map, STW_PCTL_REG_HI, &val);
|
|
if (ret)
|
|
return ret;
|
|
vrfy = (val & 0x03) << 3;
|
|
ret = regmap_read(stw481x->map, STW_PCTL_REG_LO, &val);
|
|
if (ret)
|
|
return ret;
|
|
vrfy |= ((val >> 5) & 0x07);
|
|
if (vrfy != reg)
|
|
return -EIO;
|
|
return (val >> 1) & 0x0f;
|
|
}
|
|
|
|
static int stw481x_startup(struct stw481x *stw481x)
|
|
{
|
|
/* Voltages multiplied by 100 */
|
|
u8 vcore_val[] = { 100, 105, 110, 115, 120, 122, 124, 126, 128,
|
|
130, 132, 134, 136, 138, 140, 145 };
|
|
u8 vpll_val[] = { 105, 120, 130, 180 };
|
|
u8 vaux_val[] = { 15, 18, 25, 28 };
|
|
u8 vcore;
|
|
u8 vcore_slp;
|
|
u8 vpll;
|
|
u8 vaux;
|
|
bool vaux_en;
|
|
bool it_warn;
|
|
int ret;
|
|
unsigned int val;
|
|
|
|
ret = regmap_read(stw481x->map, STW_CONF1, &val);
|
|
if (ret)
|
|
return ret;
|
|
vaux_en = !!(val & STW_CONF1_PDN_VAUX);
|
|
it_warn = !!(val & STW_CONF1_IT_WARN);
|
|
|
|
dev_info(&stw481x->client->dev, "voltages %s\n",
|
|
(val & STW_CONF1_V_MONITORING) ? "OK" : "LOW");
|
|
dev_info(&stw481x->client->dev, "MMC level shifter %s\n",
|
|
(val & STW_CONF1_MMC_LS_STATUS) ? "high impedance" : "ON");
|
|
dev_info(&stw481x->client->dev, "VMMC: %s\n",
|
|
(val & STW_CONF1_PDN_VMMC) ? "ON" : "disabled");
|
|
|
|
dev_info(&stw481x->client->dev, "STw481x power control registers:\n");
|
|
|
|
ret = stw481x_get_pctl_reg(stw481x, STW_PC_VCORE_SEL);
|
|
if (ret < 0)
|
|
return ret;
|
|
vcore = ret & 0x0f;
|
|
|
|
ret = stw481x_get_pctl_reg(stw481x, STW_PC_VAUX_SEL);
|
|
if (ret < 0)
|
|
return ret;
|
|
vaux = (ret >> 2) & 3;
|
|
vpll = (ret >> 4) & 1; /* Save bit 4 */
|
|
|
|
ret = stw481x_get_pctl_reg(stw481x, STW_PC_VPLL_SEL);
|
|
if (ret < 0)
|
|
return ret;
|
|
vpll |= (ret >> 1) & 2;
|
|
|
|
dev_info(&stw481x->client->dev, "VCORE: %u.%uV %s\n",
|
|
vcore_val[vcore] / 100, vcore_val[vcore] % 100,
|
|
(ret & 4) ? "ON" : "OFF");
|
|
|
|
dev_info(&stw481x->client->dev, "VPLL: %u.%uV %s\n",
|
|
vpll_val[vpll] / 100, vpll_val[vpll] % 100,
|
|
(ret & 0x10) ? "ON" : "OFF");
|
|
|
|
dev_info(&stw481x->client->dev, "VAUX: %u.%uV %s\n",
|
|
vaux_val[vaux] / 10, vaux_val[vaux] % 10,
|
|
vaux_en ? "ON" : "OFF");
|
|
|
|
ret = regmap_read(stw481x->map, STW_CONF2, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_info(&stw481x->client->dev, "TWARN: %s threshold, %s\n",
|
|
it_warn ? "below" : "above",
|
|
(val & STW_CONF2_MASK_TWARN) ?
|
|
"enabled" : "mask through VDDOK");
|
|
dev_info(&stw481x->client->dev, "VMMC: %s\n",
|
|
(val & STW_CONF2_VMMC_EXT) ? "internal" : "external");
|
|
dev_info(&stw481x->client->dev, "IT WAKE UP: %s\n",
|
|
(val & STW_CONF2_MASK_IT_WAKE_UP) ? "enabled" : "masked");
|
|
dev_info(&stw481x->client->dev, "GPO1: %s\n",
|
|
(val & STW_CONF2_GPO1) ? "low" : "high impedance");
|
|
dev_info(&stw481x->client->dev, "GPO2: %s\n",
|
|
(val & STW_CONF2_GPO2) ? "low" : "high impedance");
|
|
|
|
ret = regmap_read(stw481x->map, STW_VCORE_SLEEP, &val);
|
|
if (ret)
|
|
return ret;
|
|
vcore_slp = val & 0x0f;
|
|
dev_info(&stw481x->client->dev, "VCORE SLEEP: %u.%uV\n",
|
|
vcore_val[vcore_slp] / 100, vcore_val[vcore_slp] % 100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* MFD cells - we have one cell which is selected operation
|
|
* mode, and we always have a GPIO cell.
|
|
*/
|
|
static struct mfd_cell stw481x_cells[] = {
|
|
{
|
|
.of_compatible = "st,stw481x-vmmc",
|
|
.name = "stw481x-vmmc-regulator",
|
|
.id = -1,
|
|
},
|
|
};
|
|
|
|
static const struct regmap_config stw481x_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
static int stw481x_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct stw481x *stw481x;
|
|
int ret;
|
|
int i;
|
|
|
|
stw481x = devm_kzalloc(&client->dev, sizeof(*stw481x), GFP_KERNEL);
|
|
if (!stw481x)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, stw481x);
|
|
stw481x->client = client;
|
|
stw481x->map = devm_regmap_init_i2c(client, &stw481x_regmap_config);
|
|
if (IS_ERR(stw481x->map)) {
|
|
ret = PTR_ERR(stw481x->map);
|
|
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = stw481x_startup(stw481x);
|
|
if (ret) {
|
|
dev_err(&client->dev, "chip initialization failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Set up and register the platform devices. */
|
|
for (i = 0; i < ARRAY_SIZE(stw481x_cells); i++) {
|
|
/* One state holder for all drivers, this is simple */
|
|
stw481x_cells[i].platform_data = stw481x;
|
|
stw481x_cells[i].pdata_size = sizeof(*stw481x);
|
|
}
|
|
|
|
ret = mfd_add_devices(&client->dev, 0, stw481x_cells,
|
|
ARRAY_SIZE(stw481x_cells), NULL, 0, NULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_info(&client->dev, "initialized STw481x device\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stw481x_remove(struct i2c_client *client)
|
|
{
|
|
mfd_remove_devices(&client->dev);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This ID table is completely unused, as this is a pure
|
|
* device-tree probed driver, but it has to be here due to
|
|
* the structure of the I2C core.
|
|
*/
|
|
static const struct i2c_device_id stw481x_id[] = {
|
|
{ "stw481x", 0 },
|
|
{ },
|
|
};
|
|
|
|
static const struct of_device_id stw481x_match[] = {
|
|
{ .compatible = "st,stw4810", },
|
|
{ .compatible = "st,stw4811", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stw481x_match);
|
|
|
|
static struct i2c_driver stw481x_driver = {
|
|
.driver = {
|
|
.name = "stw481x",
|
|
.of_match_table = stw481x_match,
|
|
},
|
|
.probe = stw481x_probe,
|
|
.remove = stw481x_remove,
|
|
.id_table = stw481x_id,
|
|
};
|
|
|
|
module_i2c_driver(stw481x_driver);
|
|
|
|
MODULE_AUTHOR("Linus Walleij");
|
|
MODULE_DESCRIPTION("STw481x PMIC driver");
|
|
MODULE_LICENSE("GPL v2");
|