986 lines
29 KiB
C
Executable File
986 lines
29 KiB
C
Executable File
/*
|
|
* PMC-Sierra MSP board specific pci_ops
|
|
*
|
|
* Copyright 2001 MontaVista Software Inc.
|
|
* Copyright 2005-2007 PMC-Sierra, Inc
|
|
*
|
|
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
|
|
*
|
|
* Much of the code is derived from the original DDB5074 port by
|
|
* Geert Uytterhoeven <geert@linux-m68k.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#define PCI_COUNTERS 1
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/seq_file.h>
|
|
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
|
|
#include <asm/mipsmtregs.h>
|
|
#endif
|
|
|
|
#include <msp_prom.h>
|
|
#include <msp_cic_int.h>
|
|
#include <msp_pci.h>
|
|
#include <msp_regs.h>
|
|
#include <msp_regops.h>
|
|
|
|
#define PCI_ACCESS_READ 0
|
|
#define PCI_ACCESS_WRITE 1
|
|
|
|
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
|
|
static char proc_init;
|
|
extern struct proc_dir_entry *proc_bus_pci_dir;
|
|
unsigned int pci_int_count[32];
|
|
|
|
static void pci_proc_init(void);
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: show_msp_pci_counts
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Prints the count of how many times each PCI
|
|
* interrupt has asserted. Can be invoked by the
|
|
* /proc filesystem.
|
|
*
|
|
* INPUTS: m - synthetic file construction data
|
|
* v - iterator
|
|
*
|
|
* RETURNS: 0 or error
|
|
*
|
|
****************************************************************************/
|
|
static int show_msp_pci_counts(struct seq_file *m, void *v)
|
|
{
|
|
int i;
|
|
unsigned int intcount, total = 0;
|
|
|
|
for (i = 0; i < 32; ++i) {
|
|
intcount = pci_int_count[i];
|
|
if (intcount != 0) {
|
|
seq_printf(m, "[%d] = %u\n", i, intcount);
|
|
total += intcount;
|
|
}
|
|
}
|
|
|
|
seq_printf(m, "total = %u\n", total);
|
|
return 0;
|
|
}
|
|
|
|
static int msp_pci_rd_cnt_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, show_msp_pci_counts, NULL);
|
|
}
|
|
|
|
static const struct file_operations msp_pci_rd_cnt_fops = {
|
|
.open = msp_pci_rd_cnt_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: gen_pci_cfg_wr_show
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Generates a configuration write cycle for debug purposes.
|
|
* The IDSEL line asserted and location and data written are
|
|
* immaterial. Just want to be able to prove that a
|
|
* configuration write can be correctly generated on the
|
|
* PCI bus. Intent is that this function by invocable from
|
|
* the /proc filesystem.
|
|
*
|
|
* INPUTS: m - synthetic file construction data
|
|
* v - iterator
|
|
*
|
|
* RETURNS: 0 or error
|
|
*
|
|
****************************************************************************/
|
|
static int gen_pci_cfg_wr_show(struct seq_file *m, void *v)
|
|
{
|
|
unsigned char where = 0; /* Write to static Device/Vendor ID */
|
|
unsigned char bus_num = 0; /* Bus 0 */
|
|
unsigned char dev_fn = 0xF; /* Arbitrary device number */
|
|
u32 wr_data = 0xFF00AA00; /* Arbitrary data */
|
|
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
|
|
unsigned long value;
|
|
int intr;
|
|
|
|
seq_puts(m, "PMC MSP PCI: Beginning\n");
|
|
|
|
if (proc_init == 0) {
|
|
pci_proc_init();
|
|
proc_init = ~0;
|
|
}
|
|
|
|
seq_puts(m, "PMC MSP PCI: Before Cfg Wr\n");
|
|
|
|
/*
|
|
* Generate PCI Configuration Write Cycle
|
|
*/
|
|
|
|
/* Clear cause register bits */
|
|
preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
|
|
|
|
/* Setup address that is to appear on PCI bus */
|
|
preg->config_addr = BPCI_CFGADDR_ENABLE |
|
|
(bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
|
|
(dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
|
|
(where & 0xFC);
|
|
|
|
value = cpu_to_le32(wr_data);
|
|
|
|
/* Launch the PCI configuration write cycle */
|
|
*PCI_CONFIG_SPACE_REG = value;
|
|
|
|
/*
|
|
* Check if the PCI configuration cycle (rd or wr) succeeded, by
|
|
* checking the status bits for errors like master or target abort.
|
|
*/
|
|
intr = preg->if_status;
|
|
|
|
seq_puts(m, "PMC MSP PCI: After Cfg Wr\n");
|
|
return 0;
|
|
}
|
|
|
|
static int gen_pci_cfg_wr_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, gen_pci_cfg_wr_show, NULL);
|
|
}
|
|
|
|
static const struct file_operations gen_pci_cfg_wr_fops = {
|
|
.open = gen_pci_cfg_wr_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: pci_proc_init
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Create entries in the /proc filesystem for debug access.
|
|
*
|
|
* INPUTS: none
|
|
*
|
|
* OUTPUTS: none
|
|
*
|
|
* RETURNS: none
|
|
*
|
|
****************************************************************************/
|
|
static void pci_proc_init(void)
|
|
{
|
|
proc_create("pmc_msp_pci_rd_cnt", 0, NULL, &msp_pci_rd_cnt_fops);
|
|
proc_create("pmc_msp_pci_cfg_wr", 0, NULL, &gen_pci_cfg_wr_fops);
|
|
}
|
|
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
|
|
|
|
static DEFINE_SPINLOCK(bpci_lock);
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* STRUCT: pci_io_resource
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Defines the address range that pciauto() will use to
|
|
* assign to the I/O BARs of PCI devices.
|
|
*
|
|
* Use the start and end addresses of the MSP7120 PCI Host
|
|
* Controller I/O space, in the form that they appear on the
|
|
* PCI bus AFTER MSP7120 has performed address translation.
|
|
*
|
|
* For I/O accesses, MSP7120 ignores OATRAN and maps I/O
|
|
* accesses into the bottom 0xFFF region of address space,
|
|
* so that is the range to put into the pci_io_resource
|
|
* struct.
|
|
*
|
|
* In MSP4200, the start address was 0x04 instead of the
|
|
* expected 0x00. Will just assume there was a good reason
|
|
* for this!
|
|
*
|
|
* NOTES: Linux, by default, will assign I/O space to the lowest
|
|
* region of address space. Since MSP7120 and Linux,
|
|
* by default, have no offset in between how they map, the
|
|
* io_offset element of pci_controller struct should be set
|
|
* to zero.
|
|
* ELEMENTS:
|
|
* name - String used for a meaningful name.
|
|
*
|
|
* start - Start address of MSP7120's I/O space, as MSP7120 presents
|
|
* the address on the PCI bus.
|
|
*
|
|
* end - End address of MSP7120's I/O space, as MSP7120 presents
|
|
* the address on the PCI bus.
|
|
*
|
|
* flags - Attributes indicating the type of resource. In this case,
|
|
* indicate I/O space.
|
|
*
|
|
****************************************************************************/
|
|
static struct resource pci_io_resource = {
|
|
.name = "pci IO space",
|
|
.start = 0x04,
|
|
.end = 0x0FFF,
|
|
.flags = IORESOURCE_IO /* I/O space */
|
|
};
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* STRUCT: pci_mem_resource
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Defines the address range that pciauto() will use to
|
|
* assign to the memory BARs of PCI devices.
|
|
*
|
|
* The .start and .end values are dependent upon how address
|
|
* translation is performed by the OATRAN regiser.
|
|
*
|
|
* The values to use for .start and .end are the values
|
|
* in the form they appear on the PCI bus AFTER MSP7120 has
|
|
* performed OATRAN address translation.
|
|
*
|
|
* ELEMENTS:
|
|
* name - String used for a meaningful name.
|
|
*
|
|
* start - Start address of MSP7120's memory space, as MSP7120 presents
|
|
* the address on the PCI bus.
|
|
*
|
|
* end - End address of MSP7120's memory space, as MSP7120 presents
|
|
* the address on the PCI bus.
|
|
*
|
|
* flags - Attributes indicating the type of resource. In this case,
|
|
* indicate memory space.
|
|
*
|
|
****************************************************************************/
|
|
static struct resource pci_mem_resource = {
|
|
.name = "pci memory space",
|
|
.start = MSP_PCI_SPACE_BASE,
|
|
.end = MSP_PCI_SPACE_END,
|
|
.flags = IORESOURCE_MEM /* memory space */
|
|
};
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: bpci_interrupt
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: PCI status interrupt handler. Updates the count of how
|
|
* many times each status bit has been set, then clears
|
|
* the status bits. If the appropriate macros are defined,
|
|
* these counts can be viewed via the /proc filesystem.
|
|
*
|
|
* INPUTS: irq - unused
|
|
* dev_id - unused
|
|
* pt_regs - unused
|
|
*
|
|
* OUTPUTS: none
|
|
*
|
|
* RETURNS: PCIBIOS_SUCCESSFUL - success
|
|
*
|
|
****************************************************************************/
|
|
static irqreturn_t bpci_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
|
|
unsigned int stat = preg->if_status;
|
|
|
|
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
|
|
int i;
|
|
for (i = 0; i < 32; ++i) {
|
|
if ((1 << i) & stat)
|
|
++pci_int_count[i];
|
|
}
|
|
#endif /* PROC_FS && PCI_COUNTERS */
|
|
|
|
/* printk("PCI ISR: Status=%08X\n", stat); */
|
|
|
|
/* write to clear all asserted interrupts */
|
|
preg->if_status = stat;
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: msp_pcibios_config_access
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Performs a PCI configuration access (rd or wr), then
|
|
* checks that the access succeeded by querying MSP7120's
|
|
* PCI status bits.
|
|
*
|
|
* INPUTS:
|
|
* access_type - kind of PCI configuration cycle to perform
|
|
* (read or write). Legal values are
|
|
* PCI_ACCESS_WRITE and PCI_ACCESS_READ.
|
|
*
|
|
* bus - pointer to the bus number of the device to
|
|
* be targeted for the configuration cycle.
|
|
* The only element of the pci_bus structure
|
|
* used is bus->number. This argument determines
|
|
* if the configuration access will be Type 0 or
|
|
* Type 1. Since MSP7120 assumes itself to be the
|
|
* PCI Host, any non-zero bus->number generates
|
|
* a Type 1 access.
|
|
*
|
|
* devfn - this is an 8-bit field. The lower three bits
|
|
* specify the function number of the device to
|
|
* be targeted for the configuration cycle, with
|
|
* all three-bit combinations being legal. The
|
|
* upper five bits specify the device number,
|
|
* with legal values being 10 to 31.
|
|
*
|
|
* where - address within the Configuration Header
|
|
* space to access.
|
|
*
|
|
* data - for write accesses, contains the data to
|
|
* write.
|
|
*
|
|
* OUTPUTS:
|
|
* data - for read accesses, contains the value read.
|
|
*
|
|
* RETURNS: PCIBIOS_SUCCESSFUL - success
|
|
* -1 - access failure
|
|
*
|
|
****************************************************************************/
|
|
int msp_pcibios_config_access(unsigned char access_type,
|
|
struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
unsigned char where,
|
|
u32 *data)
|
|
{
|
|
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
|
|
unsigned char bus_num = bus->number;
|
|
unsigned char dev_fn = (unsigned char)devfn;
|
|
unsigned long flags;
|
|
unsigned long intr;
|
|
unsigned long value;
|
|
static char pciirqflag;
|
|
int ret;
|
|
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
|
|
unsigned int vpe_status;
|
|
#endif
|
|
|
|
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
|
|
if (proc_init == 0) {
|
|
pci_proc_init();
|
|
proc_init = ~0;
|
|
}
|
|
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
|
|
|
|
/*
|
|
* Just the first time this function invokes, allocate
|
|
* an interrupt line for PCI host status interrupts. The
|
|
* allocation assigns an interrupt handler to the interrupt.
|
|
*/
|
|
if (pciirqflag == 0) {
|
|
ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
|
|
bpci_interrupt,
|
|
IRQF_SHARED,
|
|
"PMC MSP PCI Host",
|
|
preg);
|
|
if (ret != 0)
|
|
return ret;
|
|
pciirqflag = ~0;
|
|
}
|
|
|
|
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
|
|
local_irq_save(flags);
|
|
vpe_status = dvpe();
|
|
#else
|
|
spin_lock_irqsave(&bpci_lock, flags);
|
|
#endif
|
|
|
|
/*
|
|
* Clear PCI cause register bits.
|
|
*
|
|
* In Polo, the PCI Host had a dedicated DMA called the
|
|
* Block Copy (not to be confused with the general purpose Block
|
|
* Copy Engine block). There appear to have been special interrupts
|
|
* for this Block Copy, called Block Copy 0 Fault (BC0F) and
|
|
* Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this
|
|
* dedicated Block Copy block, so these two interrupts are now
|
|
* marked reserved. In case the Block Copy is resurrected in a
|
|
* future design, maintain the code that treats these two interrupts
|
|
* specially.
|
|
*
|
|
* Write to clear all interrupts in the PCI status register, aside
|
|
* from BC0F and BC1F.
|
|
*/
|
|
preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
|
|
|
|
/* Setup address that is to appear on PCI bus */
|
|
preg->config_addr = BPCI_CFGADDR_ENABLE |
|
|
(bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
|
|
(dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
|
|
(where & 0xFC);
|
|
|
|
/* IF access is a PCI configuration write */
|
|
if (access_type == PCI_ACCESS_WRITE) {
|
|
value = cpu_to_le32(*data);
|
|
*PCI_CONFIG_SPACE_REG = value;
|
|
} else {
|
|
/* ELSE access is a PCI configuration read */
|
|
value = le32_to_cpu(*PCI_CONFIG_SPACE_REG);
|
|
*data = value;
|
|
}
|
|
|
|
/*
|
|
* Check if the PCI configuration cycle (rd or wr) succeeded, by
|
|
* checking the status bits for errors like master or target abort.
|
|
*/
|
|
intr = preg->if_status;
|
|
|
|
/* Clear config access */
|
|
preg->config_addr = 0;
|
|
|
|
/* IF error occurred */
|
|
if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) {
|
|
/* Clear status bits */
|
|
preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
|
|
|
|
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
|
|
evpe(vpe_status);
|
|
local_irq_restore(flags);
|
|
#else
|
|
spin_unlock_irqrestore(&bpci_lock, flags);
|
|
#endif
|
|
|
|
return -1;
|
|
}
|
|
|
|
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
|
|
evpe(vpe_status);
|
|
local_irq_restore(flags);
|
|
#else
|
|
spin_unlock_irqrestore(&bpci_lock, flags);
|
|
#endif
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: msp_pcibios_read_config_byte
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Read a byte from PCI configuration address spac
|
|
* Since the hardware can't address 8 bit chunks
|
|
* directly, read a 32-bit chunk, then mask off extraneous
|
|
* bits.
|
|
*
|
|
* INPUTS bus - structure containing attributes for the PCI bus
|
|
* that the read is destined for.
|
|
* devfn - device/function combination that the read is
|
|
* destined for.
|
|
* where - register within the Configuration Header space
|
|
* to access.
|
|
*
|
|
* OUTPUTS val - read data
|
|
*
|
|
* RETURNS: PCIBIOS_SUCCESSFUL - success
|
|
* -1 - read access failure
|
|
*
|
|
****************************************************************************/
|
|
static int
|
|
msp_pcibios_read_config_byte(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where,
|
|
u32 *val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
/*
|
|
* If the config access did not complete normally (e.g., underwent
|
|
* master abort) do the PCI compliant thing, which is to supply an
|
|
* all ones value.
|
|
*/
|
|
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
|
|
where, &data)) {
|
|
*val = 0xFFFFFFFF;
|
|
return -1;
|
|
}
|
|
|
|
*val = (data >> ((where & 3) << 3)) & 0x0ff;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: msp_pcibios_read_config_word
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Read a word (16 bits) from PCI configuration address space.
|
|
* Since the hardware can't address 16 bit chunks
|
|
* directly, read a 32-bit chunk, then mask off extraneous
|
|
* bits.
|
|
*
|
|
* INPUTS bus - structure containing attributes for the PCI bus
|
|
* that the read is destined for.
|
|
* devfn - device/function combination that the read is
|
|
* destined for.
|
|
* where - register within the Configuration Header space
|
|
* to access.
|
|
*
|
|
* OUTPUTS val - read data
|
|
*
|
|
* RETURNS: PCIBIOS_SUCCESSFUL - success
|
|
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
|
|
* -1 - read access failure
|
|
*
|
|
****************************************************************************/
|
|
static int
|
|
msp_pcibios_read_config_word(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where,
|
|
u32 *val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
/* if (where & 1) */ /* Commented out non-compliant code.
|
|
* Should allow word access to configuration
|
|
* registers, with only exception being when
|
|
* the word access would wrap around into
|
|
* the next dword.
|
|
*/
|
|
if ((where & 3) == 3) {
|
|
*val = 0xFFFFFFFF;
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
}
|
|
|
|
/*
|
|
* If the config access did not complete normally (e.g., underwent
|
|
* master abort) do the PCI compliant thing, which is to supply an
|
|
* all ones value.
|
|
*/
|
|
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
|
|
where, &data)) {
|
|
*val = 0xFFFFFFFF;
|
|
return -1;
|
|
}
|
|
|
|
*val = (data >> ((where & 3) << 3)) & 0x0ffff;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: msp_pcibios_read_config_dword
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Read a double word (32 bits) from PCI configuration
|
|
* address space.
|
|
*
|
|
* INPUTS bus - structure containing attributes for the PCI bus
|
|
* that the read is destined for.
|
|
* devfn - device/function combination that the read is
|
|
* destined for.
|
|
* where - register within the Configuration Header space
|
|
* to access.
|
|
*
|
|
* OUTPUTS val - read data
|
|
*
|
|
* RETURNS: PCIBIOS_SUCCESSFUL - success
|
|
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
|
|
* -1 - read access failure
|
|
*
|
|
****************************************************************************/
|
|
static int
|
|
msp_pcibios_read_config_dword(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where,
|
|
u32 *val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
/* Address must be dword aligned. */
|
|
if (where & 3) {
|
|
*val = 0xFFFFFFFF;
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
}
|
|
|
|
/*
|
|
* If the config access did not complete normally (e.g., underwent
|
|
* master abort) do the PCI compliant thing, which is to supply an
|
|
* all ones value.
|
|
*/
|
|
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
|
|
where, &data)) {
|
|
*val = 0xFFFFFFFF;
|
|
return -1;
|
|
}
|
|
|
|
*val = data;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: msp_pcibios_write_config_byte
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Write a byte to PCI configuration address space.
|
|
* Since the hardware can't address 8 bit chunks
|
|
* directly, a read-modify-write is performed.
|
|
*
|
|
* INPUTS bus - structure containing attributes for the PCI bus
|
|
* that the write is destined for.
|
|
* devfn - device/function combination that the write is
|
|
* destined for.
|
|
* where - register within the Configuration Header space
|
|
* to access.
|
|
* val - value to write
|
|
*
|
|
* OUTPUTS none
|
|
*
|
|
* RETURNS: PCIBIOS_SUCCESSFUL - success
|
|
* -1 - write access failure
|
|
*
|
|
****************************************************************************/
|
|
static int
|
|
msp_pcibios_write_config_byte(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where,
|
|
u8 val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
/* read config space */
|
|
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
|
|
where, &data))
|
|
return -1;
|
|
|
|
/* modify the byte within the dword */
|
|
data = (data & ~(0xff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
|
|
/* write back the full dword */
|
|
if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
|
|
where, &data))
|
|
return -1;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: msp_pcibios_write_config_word
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Write a word (16-bits) to PCI configuration address space.
|
|
* Since the hardware can't address 16 bit chunks
|
|
* directly, a read-modify-write is performed.
|
|
*
|
|
* INPUTS bus - structure containing attributes for the PCI bus
|
|
* that the write is destined for.
|
|
* devfn - device/function combination that the write is
|
|
* destined for.
|
|
* where - register within the Configuration Header space
|
|
* to access.
|
|
* val - value to write
|
|
*
|
|
* OUTPUTS none
|
|
*
|
|
* RETURNS: PCIBIOS_SUCCESSFUL - success
|
|
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
|
|
* -1 - write access failure
|
|
*
|
|
****************************************************************************/
|
|
static int
|
|
msp_pcibios_write_config_word(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where,
|
|
u16 val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
/* Fixed non-compliance: if (where & 1) */
|
|
if ((where & 3) == 3)
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
/* read config space */
|
|
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
|
|
where, &data))
|
|
return -1;
|
|
|
|
/* modify the word within the dword */
|
|
data = (data & ~(0xffff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
|
|
/* write back the full dword */
|
|
if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
|
|
where, &data))
|
|
return -1;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: msp_pcibios_write_config_dword
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Write a double word (32-bits) to PCI configuration address
|
|
* space.
|
|
*
|
|
* INPUTS bus - structure containing attributes for the PCI bus
|
|
* that the write is destined for.
|
|
* devfn - device/function combination that the write is
|
|
* destined for.
|
|
* where - register within the Configuration Header space
|
|
* to access.
|
|
* val - value to write
|
|
*
|
|
* OUTPUTS none
|
|
*
|
|
* RETURNS: PCIBIOS_SUCCESSFUL - success
|
|
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
|
|
* -1 - write access failure
|
|
*
|
|
****************************************************************************/
|
|
static int
|
|
msp_pcibios_write_config_dword(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where,
|
|
u32 val)
|
|
{
|
|
/* check that address is dword aligned */
|
|
if (where & 3)
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
/* perform write */
|
|
if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
|
|
where, &val))
|
|
return -1;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: msp_pcibios_read_config
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Interface the PCI configuration read request with
|
|
* the appropriate function, based on how many bytes
|
|
* the read request is.
|
|
*
|
|
* INPUTS bus - structure containing attributes for the PCI bus
|
|
* that the write is destined for.
|
|
* devfn - device/function combination that the write is
|
|
* destined for.
|
|
* where - register within the Configuration Header space
|
|
* to access.
|
|
* size - in units of bytes, should be 1, 2, or 4.
|
|
*
|
|
* OUTPUTS val - value read, with any extraneous bytes masked
|
|
* to zero.
|
|
*
|
|
* RETURNS: PCIBIOS_SUCCESSFUL - success
|
|
* -1 - failure
|
|
*
|
|
****************************************************************************/
|
|
int
|
|
msp_pcibios_read_config(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where,
|
|
int size,
|
|
u32 *val)
|
|
{
|
|
if (size == 1) {
|
|
if (msp_pcibios_read_config_byte(bus, devfn, where, val)) {
|
|
return -1;
|
|
}
|
|
} else if (size == 2) {
|
|
if (msp_pcibios_read_config_word(bus, devfn, where, val)) {
|
|
return -1;
|
|
}
|
|
} else if (size == 4) {
|
|
if (msp_pcibios_read_config_dword(bus, devfn, where, val)) {
|
|
return -1;
|
|
}
|
|
} else {
|
|
*val = 0xFFFFFFFF;
|
|
return -1;
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: msp_pcibios_write_config
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Interface the PCI configuration write request with
|
|
* the appropriate function, based on how many bytes
|
|
* the read request is.
|
|
*
|
|
* INPUTS bus - structure containing attributes for the PCI bus
|
|
* that the write is destined for.
|
|
* devfn - device/function combination that the write is
|
|
* destined for.
|
|
* where - register within the Configuration Header space
|
|
* to access.
|
|
* size - in units of bytes, should be 1, 2, or 4.
|
|
* val - value to write
|
|
*
|
|
* OUTPUTS: none
|
|
*
|
|
* RETURNS: PCIBIOS_SUCCESSFUL - success
|
|
* -1 - failure
|
|
*
|
|
****************************************************************************/
|
|
int
|
|
msp_pcibios_write_config(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where,
|
|
int size,
|
|
u32 val)
|
|
{
|
|
if (size == 1) {
|
|
if (msp_pcibios_write_config_byte(bus, devfn,
|
|
where, (u8)(0xFF & val))) {
|
|
return -1;
|
|
}
|
|
} else if (size == 2) {
|
|
if (msp_pcibios_write_config_word(bus, devfn,
|
|
where, (u16)(0xFFFF & val))) {
|
|
return -1;
|
|
}
|
|
} else if (size == 4) {
|
|
if (msp_pcibios_write_config_dword(bus, devfn, where, val)) {
|
|
return -1;
|
|
}
|
|
} else {
|
|
return -1;
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* STRUCTURE: msp_pci_ops
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: structure to abstract the hardware specific PCI
|
|
* configuration accesses.
|
|
*
|
|
* ELEMENTS:
|
|
* read - function for Linux to generate PCI Configuration reads.
|
|
* write - function for Linux to generate PCI Configuration writes.
|
|
*
|
|
****************************************************************************/
|
|
struct pci_ops msp_pci_ops = {
|
|
.read = msp_pcibios_read_config,
|
|
.write = msp_pcibios_write_config
|
|
};
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* STRUCTURE: msp_pci_controller
|
|
* _________________________________________________________________________
|
|
*
|
|
* Describes the attributes of the MSP7120 PCI Host Controller
|
|
*
|
|
* ELEMENTS:
|
|
* pci_ops - abstracts the hardware specific PCI configuration
|
|
* accesses.
|
|
*
|
|
* mem_resource - address range pciauto() uses to assign to PCI device
|
|
* memory BARs.
|
|
*
|
|
* mem_offset - offset between how MSP7120 outbound PCI memory
|
|
* transaction addresses appear on the PCI bus and how Linux
|
|
* wants to configure memory BARs of the PCI devices.
|
|
* MSP7120 does nothing funky, so just set to zero.
|
|
*
|
|
* io_resource - address range pciauto() uses to assign to PCI device
|
|
* I/O BARs.
|
|
*
|
|
* io_offset - offset between how MSP7120 outbound PCI I/O
|
|
* transaction addresses appear on the PCI bus and how
|
|
* Linux defaults to configure I/O BARs of the PCI devices.
|
|
* MSP7120 maps outbound I/O accesses into the bottom
|
|
* bottom 4K of PCI address space (and ignores OATRAN).
|
|
* Since the Linux default is to configure I/O BARs to the
|
|
* bottom 4K, no special offset is needed. Just set to zero.
|
|
*
|
|
****************************************************************************/
|
|
static struct pci_controller msp_pci_controller = {
|
|
.pci_ops = &msp_pci_ops,
|
|
.mem_resource = &pci_mem_resource,
|
|
.mem_offset = 0,
|
|
.io_map_base = MSP_PCI_IOSPACE_BASE,
|
|
.io_resource = &pci_io_resource,
|
|
.io_offset = 0
|
|
};
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* FUNCTION: msp_pci_init
|
|
* _________________________________________________________________________
|
|
*
|
|
* DESCRIPTION: Initialize the PCI Host Controller and register it with
|
|
* Linux so Linux can seize control of the PCI bus.
|
|
*
|
|
****************************************************************************/
|
|
void __init msp_pci_init(void)
|
|
{
|
|
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
|
|
u32 id;
|
|
|
|
/* Extract Device ID */
|
|
id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12;
|
|
|
|
/* Check if JTAG ID identifies MSP7120 */
|
|
if (!MSP_HAS_PCI(id)) {
|
|
printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id);
|
|
goto no_pci;
|
|
}
|
|
|
|
/*
|
|
* Enable flushing of the PCI-SDRAM queue upon a read
|
|
* of the SDRAM's Memory Configuration Register.
|
|
*/
|
|
*(unsigned long *)QFLUSH_REG_1 = 3;
|
|
|
|
/* Configure PCI Host Controller. */
|
|
preg->if_status = ~0; /* Clear cause register bits */
|
|
preg->config_addr = 0; /* Clear config access */
|
|
preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */
|
|
preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */
|
|
|
|
/* configure so inb(), outb(), and family are functional */
|
|
set_io_port_base(MSP_PCI_IOSPACE_BASE);
|
|
|
|
/* Tell Linux the details of the MSP7120 PCI Host Controller */
|
|
register_pci_controller(&msp_pci_controller);
|
|
|
|
return;
|
|
|
|
no_pci:
|
|
/* Disable PCI channel */
|
|
printk(KERN_WARNING "PCI: no host PCI bus detected\n");
|
|
}
|