497 lines
14 KiB
C
Executable File
497 lines
14 KiB
C
Executable File
/*
|
|
* usb-host.c - OMAP USB Host
|
|
*
|
|
* This file will contain the board specific details for the
|
|
* Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
|
|
*
|
|
* Copyright (C) 2007-2011 Texas Instruments
|
|
* Author: Vikram Pandita <vikram.pandita@ti.com>
|
|
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
|
|
*
|
|
* Generalization by:
|
|
* Felipe Balbi <balbi@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/string.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/usb/phy.h>
|
|
#include <linux/usb/usb_phy_generic.h>
|
|
|
|
#include "soc.h"
|
|
#include "omap_device.h"
|
|
#include "mux.h"
|
|
#include "usb.h"
|
|
|
|
#ifdef CONFIG_MFD_OMAP_USB_HOST
|
|
|
|
#define OMAP_USBHS_DEVICE "usbhs_omap"
|
|
#define OMAP_USBTLL_DEVICE "usbhs_tll"
|
|
#define USBHS_UHH_HWMODNAME "usb_host_hs"
|
|
#define USBHS_TLL_HWMODNAME "usb_tll_hs"
|
|
|
|
/* MUX settings for EHCI pins */
|
|
/*
|
|
* setup_ehci_io_mux - initialize IO pad mux for USBHOST
|
|
*/
|
|
static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
|
|
{
|
|
switch (port_mode[0]) {
|
|
case OMAP_EHCI_PORT_MODE_PHY:
|
|
omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_EHCI_PORT_MODE_TLL:
|
|
omap_mux_init_signal("hsusb1_tll_stp",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("hsusb1_tll_clk",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_dir",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_nxt",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (port_mode[1]) {
|
|
case OMAP_EHCI_PORT_MODE_PHY:
|
|
omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_EHCI_PORT_MODE_TLL:
|
|
omap_mux_init_signal("hsusb2_tll_stp",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("hsusb2_tll_clk",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_dir",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_nxt",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (port_mode[2]) {
|
|
case OMAP_EHCI_PORT_MODE_PHY:
|
|
printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
|
|
break;
|
|
case OMAP_EHCI_PORT_MODE_TLL:
|
|
omap_mux_init_signal("hsusb3_tll_stp",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("hsusb3_tll_clk",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_dir",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_nxt",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
|
|
{
|
|
switch (port_mode[0]) {
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
omap_mux_init_signal("mm1_rxdp",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm1_rxdm",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
omap_mux_init_signal("mm1_rxrcv",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
omap_mux_init_signal("mm1_txse0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm1_txdat",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
switch (port_mode[1]) {
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
omap_mux_init_signal("mm2_rxdp",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm2_rxdm",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
omap_mux_init_signal("mm2_rxrcv",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
omap_mux_init_signal("mm2_txse0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm2_txdat",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
switch (port_mode[2]) {
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
omap_mux_init_signal("mm3_rxdp",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm3_rxdm",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
omap_mux_init_signal("mm3_rxrcv",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
omap_mux_init_signal("mm3_txse0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm3_txdat",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
|
|
{
|
|
struct omap_hwmod *uhh_hwm, *tll_hwm;
|
|
struct platform_device *pdev;
|
|
int bus_id = -1;
|
|
|
|
if (cpu_is_omap34xx()) {
|
|
setup_ehci_io_mux(pdata->port_mode);
|
|
setup_ohci_io_mux(pdata->port_mode);
|
|
|
|
if (omap_rev() <= OMAP3430_REV_ES2_1)
|
|
pdata->single_ulpi_bypass = true;
|
|
|
|
}
|
|
|
|
uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
|
|
if (!uhh_hwm) {
|
|
pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
|
|
return;
|
|
}
|
|
|
|
tll_hwm = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
|
|
if (!tll_hwm) {
|
|
pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
|
|
return;
|
|
}
|
|
|
|
pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm,
|
|
pdata, sizeof(*pdata));
|
|
if (IS_ERR(pdev)) {
|
|
pr_err("Could not build hwmod device %s\n",
|
|
USBHS_TLL_HWMODNAME);
|
|
return;
|
|
}
|
|
|
|
pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm,
|
|
pdata, sizeof(*pdata));
|
|
if (IS_ERR(pdev)) {
|
|
pr_err("Could not build hwmod devices %s\n",
|
|
USBHS_UHH_HWMODNAME);
|
|
return;
|
|
}
|
|
}
|
|
|
|
#else
|
|
|
|
void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
/* Template for PHY regulators */
|
|
static struct fixed_voltage_config hsusb_reg_config = {
|
|
/* .supply_name filled later */
|
|
.microvolts = 3300000,
|
|
.gpio = -1, /* updated later */
|
|
.startup_delay = 70000, /* 70msec */
|
|
.enable_high = 1, /* updated later */
|
|
.enabled_at_boot = 0, /* keep in RESET */
|
|
/* .init_data filled later */
|
|
};
|
|
|
|
static const char *nop_name = "usb_phy_generic"; /* NOP PHY driver */
|
|
static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
|
|
|
|
/**
|
|
* usbhs_add_regulator - Add a gpio based fixed voltage regulator device
|
|
* @name: name for the regulator
|
|
* @dev_id: device id of the device this regulator supplies power to
|
|
* @dev_supply: supply name that the device expects
|
|
* @gpio: GPIO number
|
|
* @polarity: 1 - Active high, 0 - Active low
|
|
*/
|
|
static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
|
|
int gpio, int polarity)
|
|
{
|
|
struct regulator_consumer_supply *supplies;
|
|
struct regulator_init_data *reg_data;
|
|
struct fixed_voltage_config *config;
|
|
struct platform_device *pdev;
|
|
struct platform_device_info pdevinfo;
|
|
int ret = -ENOMEM;
|
|
|
|
supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
|
|
if (!supplies)
|
|
return -ENOMEM;
|
|
|
|
supplies->supply = dev_supply;
|
|
supplies->dev_name = dev_id;
|
|
|
|
reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
|
|
if (!reg_data)
|
|
goto err_data;
|
|
|
|
reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
|
|
reg_data->consumer_supplies = supplies;
|
|
reg_data->num_consumer_supplies = 1;
|
|
|
|
config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
|
|
GFP_KERNEL);
|
|
if (!config)
|
|
goto err_config;
|
|
|
|
config->supply_name = kstrdup(name, GFP_KERNEL);
|
|
if (!config->supply_name)
|
|
goto err_supplyname;
|
|
|
|
config->gpio = gpio;
|
|
config->enable_high = polarity;
|
|
config->init_data = reg_data;
|
|
|
|
/* create a regulator device */
|
|
memset(&pdevinfo, 0, sizeof(pdevinfo));
|
|
pdevinfo.name = reg_name;
|
|
pdevinfo.id = PLATFORM_DEVID_AUTO;
|
|
pdevinfo.data = config;
|
|
pdevinfo.size_data = sizeof(*config);
|
|
|
|
pdev = platform_device_register_full(&pdevinfo);
|
|
if (IS_ERR(pdev)) {
|
|
ret = PTR_ERR(pdev);
|
|
pr_err("%s: Failed registering regulator %s for %s : %d\n",
|
|
__func__, name, dev_id, ret);
|
|
goto err_register;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_register:
|
|
kfree(config->supply_name);
|
|
err_supplyname:
|
|
kfree(config);
|
|
err_config:
|
|
kfree(reg_data);
|
|
err_data:
|
|
kfree(supplies);
|
|
return ret;
|
|
}
|
|
|
|
#define MAX_STR 20
|
|
|
|
int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
|
|
{
|
|
char rail_name[MAX_STR];
|
|
int i;
|
|
struct platform_device *pdev;
|
|
char *phy_id;
|
|
struct platform_device_info pdevinfo;
|
|
struct usb_phy_generic_platform_data nop_pdata;
|
|
|
|
for (i = 0; i < num_phys; i++) {
|
|
|
|
if (!phy->port) {
|
|
pr_err("%s: Invalid port 0. Must start from 1\n",
|
|
__func__);
|
|
continue;
|
|
}
|
|
|
|
/* do we need a NOP PHY device ? */
|
|
if (!gpio_is_valid(phy->reset_gpio) &&
|
|
!gpio_is_valid(phy->vcc_gpio))
|
|
continue;
|
|
|
|
phy_id = kmalloc(MAX_STR, GFP_KERNEL);
|
|
if (!phy_id) {
|
|
pr_err("%s: kmalloc() failed\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* set platform data */
|
|
memset(&nop_pdata, 0, sizeof(nop_pdata));
|
|
if (gpio_is_valid(phy->vcc_gpio))
|
|
nop_pdata.needs_vcc = true;
|
|
nop_pdata.gpio_reset = phy->reset_gpio;
|
|
nop_pdata.type = USB_PHY_TYPE_USB2;
|
|
|
|
/* create a NOP PHY device */
|
|
memset(&pdevinfo, 0, sizeof(pdevinfo));
|
|
pdevinfo.name = nop_name;
|
|
pdevinfo.id = phy->port;
|
|
pdevinfo.data = &nop_pdata;
|
|
pdevinfo.size_data =
|
|
sizeof(struct usb_phy_generic_platform_data);
|
|
scnprintf(phy_id, MAX_STR, "usb_phy_generic.%d",
|
|
phy->port);
|
|
pdev = platform_device_register_full(&pdevinfo);
|
|
if (IS_ERR(pdev)) {
|
|
pr_err("%s: Failed to register device %s : %ld\n",
|
|
__func__, phy_id, PTR_ERR(pdev));
|
|
kfree(phy_id);
|
|
continue;
|
|
}
|
|
|
|
usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
|
|
|
|
/* Do we need VCC regulator ? */
|
|
if (gpio_is_valid(phy->vcc_gpio)) {
|
|
scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
|
|
usbhs_add_regulator(rail_name, phy_id, "vcc",
|
|
phy->vcc_gpio, phy->vcc_polarity);
|
|
}
|
|
|
|
phy++;
|
|
}
|
|
|
|
return 0;
|
|
}
|