444 lines
16 KiB
Plaintext
Executable File
444 lines
16 KiB
Plaintext
Executable File
OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
|
|
ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
|
|
ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
|
|
ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
|
|
ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
|
|
ospfExtLsdbLimit, ospf
|
|
FROM OSPF-MIB;
|
|
|
|
ospfTrap MODULE-IDENTITY
|
|
LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
|
|
ORGANIZATION "IETF OSPF Working Group"
|
|
CONTACT-INFO
|
|
" Fred Baker
|
|
Postal: Cisco Systems
|
|
519 Lado Drive
|
|
Santa Barbara, California 93111
|
|
Tel: +1 805 681 0115
|
|
E-Mail: fred@cisco.com
|
|
|
|
Rob Coltun
|
|
Postal: RainbowBridge Communications
|
|
Tel: (301) 340-9416
|
|
E-Mail: rcoltun@rainbow-bridge.com"
|
|
DESCRIPTION
|
|
"The MIB module to describe traps for the OSPF
|
|
Version 2 Protocol."
|
|
::= { ospf 16 }
|
|
|
|
-- Trap Support Objects
|
|
|
|
-- The following are support objects for the OSPF traps.
|
|
|
|
ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
|
|
ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }
|
|
|
|
ospfSetTrap OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A four-octet string serving as a bit map for
|
|
the trap events defined by the OSPF traps. This
|
|
object is used to enable and disable specific
|
|
OSPF traps where a 1 in the bit field
|
|
represents enabled. The right-most bit (least
|
|
significant) represents trap 0."
|
|
::= { ospfTrapControl 1 }
|
|
|
|
|
|
ospfConfigErrorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
badVersion (1),
|
|
areaMismatch (2),
|
|
unknownNbmaNbr (3), -- Router is Dr eligible
|
|
unknownVirtualNbr (4),
|
|
authTypeMismatch(5),
|
|
authFailure (6),
|
|
netMaskMismatch (7),
|
|
helloIntervalMismatch (8),
|
|
deadIntervalMismatch (9),
|
|
optionMismatch (10) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Potential types of configuration conflicts.
|
|
Used by the ospfConfigError and ospfConfigVir-
|
|
tError traps."
|
|
::= { ospfTrapControl 2 }
|
|
|
|
|
|
ospfPacketType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hello (1),
|
|
dbDescript (2),
|
|
lsReq (3),
|
|
lsUpdate (4),
|
|
lsAck (5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF packet types."
|
|
::= { ospfTrapControl 3 }
|
|
|
|
|
|
ospfPacketSrc OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of an inbound packet that can-
|
|
not be identified by a neighbor instance."
|
|
::= { ospfTrapControl 4 }
|
|
|
|
|
|
-- Traps
|
|
|
|
|
|
ospfIfStateChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfIfIpAddress,
|
|
ospfAddressLessIf,
|
|
ospfIfState -- The new state
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfStateChange trap signifies that there
|
|
has been a change in the state of a non-virtual
|
|
OSPF interface. This trap should be generated
|
|
when the interface state regresses (e.g., goes
|
|
from Dr to Down) or progresses to a terminal
|
|
state (i.e., Point-to-Point, DR Other, Dr, or
|
|
Backup)."
|
|
::= { ospfTraps 16 }
|
|
|
|
|
|
ospfVirtIfStateChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtIfAreaId,
|
|
ospfVirtIfNeighbor,
|
|
ospfVirtIfState -- The new state
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfStateChange trap signifies that there
|
|
has been a change in the state of an OSPF vir-
|
|
tual interface.
|
|
This trap should be generated when the inter-
|
|
face state regresses (e.g., goes from Point-
|
|
to-Point to Down) or progresses to a terminal
|
|
state (i.e., Point-to-Point)."
|
|
::= { ospfTraps 1 }
|
|
|
|
|
|
ospfNbrStateChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfNbrIpAddr,
|
|
ospfNbrAddressLessIndex,
|
|
ospfNbrRtrId,
|
|
ospfNbrState -- The new state
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfNbrStateChange trap signifies that
|
|
there has been a change in the state of a non-
|
|
virtual OSPF neighbor. This trap should be
|
|
generated when the neighbor state regresses
|
|
(e.g., goes from Attempt or Full to 1-Way or
|
|
Down) or progresses to a terminal state (e.g.,
|
|
2-Way or Full). When an neighbor transitions
|
|
from or to Full on non-broadcast multi-access
|
|
and broadcast networks, the trap should be gen-
|
|
erated by the designated router. A designated
|
|
router transitioning to Down will be noted by
|
|
ospfIfStateChange."
|
|
::= { ospfTraps 2 }
|
|
|
|
|
|
ospfVirtNbrStateChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtNbrArea,
|
|
ospfVirtNbrRtrId,
|
|
ospfVirtNbrState -- The new state
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfStateChange trap signifies that there
|
|
has been a change in the state of an OSPF vir-
|
|
tual neighbor. This trap should be generated
|
|
when the neighbor state regresses (e.g., goes
|
|
from Attempt or Full to 1-Way or Down) or
|
|
progresses to a terminal state (e.g., Full)."
|
|
::= { ospfTraps 3 }
|
|
ospfIfConfigError NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfIfIpAddress,
|
|
ospfAddressLessIf,
|
|
ospfPacketSrc, -- The source IP address
|
|
ospfConfigErrorType, -- Type of error
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfConfigError trap signifies that a
|
|
packet has been received on a non-virtual in-
|
|
terface from a router whose configuration
|
|
parameters conflict with this router's confi-
|
|
guration parameters. Note that the event op-
|
|
tionMismatch should cause a trap only if it
|
|
prevents an adjacency from forming."
|
|
::= { ospfTraps 4 }
|
|
|
|
|
|
ospfVirtIfConfigError NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtIfAreaId,
|
|
ospfVirtIfNeighbor,
|
|
ospfConfigErrorType, -- Type of error
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfConfigError trap signifies that a pack-
|
|
et has been received on a virtual interface
|
|
from a router whose configuration parameters
|
|
conflict with this router's configuration
|
|
parameters. Note that the event optionMismatch
|
|
should cause a trap only if it prevents an ad-
|
|
jacency from forming."
|
|
::= { ospfTraps 5 }
|
|
|
|
|
|
ospfIfAuthFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfIfIpAddress,
|
|
ospfAddressLessIf,
|
|
ospfPacketSrc, -- The source IP address
|
|
ospfConfigErrorType, -- authTypeMismatch or
|
|
-- authFailure
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfAuthFailure trap signifies that a
|
|
packet has been received on a non-virtual in-
|
|
terface from a router whose authentication key
|
|
or authentication type conflicts with this
|
|
router's authentication key or authentication
|
|
type."
|
|
::= { ospfTraps 6 }
|
|
|
|
|
|
ospfVirtIfAuthFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtIfAreaId,
|
|
ospfVirtIfNeighbor,
|
|
ospfConfigErrorType, -- authTypeMismatch or
|
|
-- authFailure
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfVirtIfAuthFailure trap signifies that a
|
|
packet has been received on a virtual interface
|
|
from a router whose authentication key or au-
|
|
thentication type conflicts with this router's
|
|
authentication key or authentication type."
|
|
::= { ospfTraps 7 }
|
|
|
|
|
|
ospfIfRxBadPacket NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfIfIpAddress,
|
|
ospfAddressLessIf,
|
|
ospfPacketSrc, -- The source IP address
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfRxBadPacket trap signifies that an
|
|
OSPF packet has been received on a non-virtual
|
|
interface that cannot be parsed."
|
|
::= { ospfTraps 8 }
|
|
|
|
ospfVirtIfRxBadPacket NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtIfAreaId,
|
|
ospfVirtIfNeighbor,
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfRxBadPacket trap signifies that an OSPF
|
|
packet has been received on a virtual interface
|
|
that cannot be parsed."
|
|
::= { ospfTraps 9 }
|
|
|
|
|
|
ospfTxRetransmit NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfIfIpAddress,
|
|
ospfAddressLessIf,
|
|
ospfNbrRtrId, -- Destination
|
|
ospfPacketType,
|
|
ospfLsdbType,
|
|
ospfLsdbLsid,
|
|
ospfLsdbRouterId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfTxRetransmit trap signifies than an
|
|
OSPF packet has been retransmitted on a non-
|
|
virtual interface. All packets that may be re-
|
|
transmitted are associated with an LSDB entry.
|
|
The LS type, LS ID, and Router ID are used to
|
|
identify the LSDB entry."
|
|
::= { ospfTraps 10 }
|
|
|
|
|
|
ospfVirtIfTxRetransmit NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtIfAreaId,
|
|
ospfVirtIfNeighbor,
|
|
ospfPacketType,
|
|
ospfLsdbType,
|
|
ospfLsdbLsid,
|
|
ospfLsdbRouterId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfTxRetransmit trap signifies than an
|
|
OSPF packet has been retransmitted on a virtual
|
|
interface. All packets that may be retransmit-
|
|
ted are associated with an LSDB entry. The LS
|
|
type, LS ID, and Router ID are used to identify
|
|
the LSDB entry."
|
|
::= { ospfTraps 11 }
|
|
|
|
|
|
ospfOriginateLsa NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
|
|
ospfLsdbType,
|
|
ospfLsdbLsid,
|
|
ospfLsdbRouterId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfOriginateLsa trap signifies that a new
|
|
LSA has been originated by this router. This
|
|
trap should not be invoked for simple refreshes
|
|
of LSAs (which happesn every 30 minutes), but
|
|
instead will only be invoked when an LSA is
|
|
(re)originated due to a topology change. Addi-
|
|
tionally, this trap does not include LSAs that
|
|
are being flushed because they have reached
|
|
MaxAge."
|
|
::= { ospfTraps 12 }
|
|
|
|
|
|
ospfMaxAgeLsa NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
|
|
ospfLsdbType,
|
|
ospfLsdbLsid,
|
|
ospfLsdbRouterId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfMaxAgeLsa trap signifies that one of
|
|
the LSA in the router's link-state database has
|
|
aged to MaxAge."
|
|
::= { ospfTraps 13 }
|
|
|
|
|
|
ospfLsdbOverflow NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfExtLsdbLimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfLsdbOverflow trap signifies that the
|
|
number of LSAs in the router's link-state data-
|
|
base has exceeded ospfExtLsdbLimit."
|
|
::= { ospfTraps 14 }
|
|
|
|
|
|
ospfLsdbApproachingOverflow NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfExtLsdbLimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfLsdbApproachingOverflow trap signifies
|
|
that the number of LSAs in the router's link-
|
|
state database has exceeded ninety percent of
|
|
ospfExtLsdbLimit."
|
|
::= { ospfTraps 15 }
|
|
|
|
|
|
-- conformance information
|
|
|
|
ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }
|
|
|
|
ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
|
|
ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
ospfTrapCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement "
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ospfTrapControlGroup }
|
|
|
|
|
|
GROUP ospfTrapControlGroup
|
|
DESCRIPTION
|
|
"This group is optional but recommended for all
|
|
OSPF systems"
|
|
::= { ospfTrapCompliances 1 }
|
|
|
|
|
|
-- units of conformance
|
|
|
|
ospfTrapControlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ospfSetTrap,
|
|
ospfConfigErrorType,
|
|
ospfPacketType,
|
|
ospfPacketSrc
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required to control traps
|
|
from OSPF systems."
|
|
::= { ospfTrapGroups 1 }
|
|
|
|
|
|
END
|